CIE augmentation data might contain non-printable characters.
The patch prints the data as a list of hex bytes.
Differential Revision: http://reviews.llvm.org/D17759
llvm-svn: 262361
MCJIT emits zero-length CIE at the end of the _eh_frame section. This change
ensures that parser inside DebugInfo will not crash and correctly record such cases.
We are now recording DW_EH_PE_omit as a default value for FDE and LSDA encodings.
Also Offset != EndAugmentationOffset assertion check will only happen if augmentation
string had 'z' letter in it.
Differential Revision: http://reviews.llvm.org/D16588
llvm-svn: 258931
to only print the first private header.
Which for Mach-O files only prints the Mach header and not the subsequent load
commands. Which is used by scripts to match what the darwin otool(1) with the
-h flag does without the -l flag.
For non-Mach-O files it has the same functionality as -private-headers (with
the trailing ’s’).
rdar://24158331
llvm-svn: 257548
LLVM MC has single methods which can handle the output of EH frame and DWARF CIE's and FDE's.
This code improves DWARFDebugFrame::parse to do the same for parsing.
This also allows llvm-objdump to support the --dwarf=frames option which objdump supports. This
option dumps the .eh_frame section using the new code in DWARFDebugFrame::parse.
http://reviews.llvm.org/D15535
Reviewed by Rafael Espindola.
llvm-svn: 256008
This code adds some simple decoding of the FDE's in an eh_frame.
There's still more to be done in terms of error handling and verification.
Also, we need to be able to decode the CFI's.
llvm-svn: 255550
This is the start of work to dump the contents of the eh_frame section.
It currently emits CIE entries. FDE entries will come later.
It also needs improved error checking which will follow soon.
http://reviews.llvm.org/D15502
Reviewed by Kevin Enderby and Lang Hames.
llvm-svn: 255546
Most linked executables do not have a symbol table in COFF.
However, it is pretty typical to have some export entries. Use those
entries to inform the disassembler about potential function definitions
and call targets.
llvm-svn: 253429
In `MachOObjectFile::getSymbolType` we currently always return `SymbolRef::ST_Function` for symbols from any section. In order for llvm-symbolizer to correctly symbolize Mach-O globals, symbols from data and BSS sections should return `SymbolRef::ST_Data`.
Differential Revision: http://reviews.llvm.org/D14576
llvm-svn: 252867
The needed lld matching changes to be submitted immediately next,
but this revision will cause lld failures with this alone which is expected.
This removes the eating of the error in Archive::Child::getSize() when the characters
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
These changes will require corresponding changes to the lld project. That will be
committed immediately after this change. But this revision will cause lld failures
with this alone which is expected.
llvm-svn: 252192
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
Also corrected the code where the size gets us to the “at the end of the archive”
which is OK but past the end of the archive will return object_error::parse_failed now.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
llvm-svn: 250906
ArchiveMemberHeader, suggestion by Rafael Espíndola.
Also The clang-x86-win2008-selfhost bot still does not like the
malformed-machos 00000031.a test, so removing it for now. All
the other bots are fine with it however.
llvm-svn: 250222
flag as it was a Mach-O universal file.
The default as to which architecture slice that is dumped without an -arch flag
depends on the host architecture and the contents of the universal file. The
malformed archive 00000031.a file has both an x86_64 and i386 slice. So for
for x86_64 hosts only that slice is dumped, for non-x86_64 hosts, which is many
of the bots both slices are dumped.
The test is intended to only check that the malformation of the x86_64 which
has a non-decimal characters in the size field of the archive header so it no
longer crashes.
The problem turned out that the i388 slice of the malformed archive had a
different malformation which was causing the non-x86_64 bots to get this error:
llvm-objdump -macho -disassemble -arch i386 00000031.a
Archive : .00000031.a
00000031.a(c_start.o):
LLVM ERROR: Symbol name entry points before beginning or past end of file.
and causing the test as it was written to fail. So by adding ‘-arch x86_64’ it
should correct the test and the malformation on the i388 slice will not be
dumped.
Also the removal of the malformed-machos mem-crup-0261.macho was not causing
the issue so that is put back in.
Sorry for the churn on these tests, Kev
llvm-svn: 250184
that caused aborts. This was because of the characters of the ‘Size’ field in
the archive header did not contain decimal characters.
rdar://22983603
llvm-svn: 250117
malformed Mach-O file that caused a crash. This was because of an
assert where the code was incorrectly attempting to parse relocation
entries off of the sections and the filetype was not an MH_OBJECT.
rdar://22983603
llvm-svn: 249921
from malformed Mach-O files that caused crashes. The first because the
offset in a dyld bind table entry was out of range. The second because their
was no image info section and the routine printing it did not have the
need check to see the section did not exist.
rdar://22983603
llvm-svn: 249845
from malformed Mach-O files that caused a crash because of a
section header had a size that extended past the end of the file.
rdar://22983603
llvm-svn: 249768
from malformed Mach-O files that caused crashes.
We recently got about 700 malformed Mach-O files which we have
been using the improve the robustness of tools that deal with reading
data from object files. These resulted in about 20 small bug fixes to
the darwin based tools.
The goal here is to also improve the robustness of llvm-objdump and
this is the first two fixes. In talking with Tim Northover the approach
we thought might be best is to:
1) Only include tests for the malformed Mach-O files that cause crashes
(not all 700+ tests).
2) The test should only contain the command line option that caused the
crash and not all the others that don’t matter.
3) There should be only one line for the FileCheck that is past the point
of the crash if possible and if possible indicates the malformation.
Again the goal is to fix crashes and not so much care about how the
printing of malformed data comes out.
Tim also suggested if we really wanted to add test cases for all 700+
malformed Mach-O files putting them in the regression tests might be
an option. But many of these do not cause crashes.
llvm-svn: 249479
AArch64 uses $d* and $x* to interleave between text and data.
llvm-objdump didn't know about this so it ended up printing garbage.
This patch is a first step towards a solution of the problem.
Differential Revision: http://reviews.llvm.org/D13360
llvm-svn: 249083
The COFFSymbolRef::isFunctionDefinition() function tests for several conditions
that are not related to whether a symbol is a function, but rather whether
the symbol meets the requirements for a function definition auxiliary record,
which excludes certain symbols such as internal functions and undefined
references. The test we need to determine the symbol type is much simpler:
we only need to compare the complex type against IMAGE_SYM_DTYPE_FUNCTION.
llvm-svn: 244195
option that works with all object container formats.
Now that clang modules/PCH are object containers this option is useful to
to construct pipes like
llvm-objdump -raw-clang-ast foo.pcm | llvm-bcanalyzer -
to inspect the AST contents in a PCH container.
Will be tested via clang.
Belatedly addresses review feedback for r233390.
llvm-svn: 241659
Only common symbol on MachO and COFF have a size.
For COFF we already had a custom format.
For MachO, there is no native objdump and we were printing it as ELF. Now
we only print the sizes for symbols that actually have them.
llvm-svn: 240422
* If the input file is missing;
* If the type of input object file can't be recognized;
* If the object file can't be parsed correctly.
llvm-svn: 239065
MachO and COFF quite reasonably only define the size for common symbols.
We used to try to figure out the "size" by computing the gap from one symbol to
the next.
This would not be correct in general, since a part of a section can belong to no
visible symbol (padding, private globals).
It was also really expensive, since we would walk every symbol to find the size
of one.
If a caller really wants this, it can sort all the symbols once and get all the
gaps ("size") in O(n log n) instead of O(n^2).
On MachO this also has the advantage of centralizing all the checks for an
invalid n_sect.
llvm-svn: 238028
option to print the archive headers using raw numeric values. Also add the -archive-member-offsets
for use with these to also trigger printing of the offset of the archive member from the start
of the archive.
llvm-svn: 236252
print the Objective-C runtime meta data for Mach-O files.
There are three types of Objective-C runtime meta data, Objc2 64-bit,
Objc2 32-bit and Objc1 32-bit. This prints the first of these types. The
changes to print the others will follow next.
llvm-svn: 233840
Simon Atanasyan