Added FMADD/FMSUB/FNMADD/FNMSUB tests for all types
Added load folding tests for 512-bit vectors
NOTE: Many of the AVX512 FMA instructions don't yet commute/fold correctly
As discussed on D14909
llvm-svn: 254232
This patch implements dynamic realignment of stack objects for targets
with a non-realigned stack pointer. Behaviour in FunctionLoweringInfo
is changed so that for a target that has StackRealignable set to
false, over-aligned static allocas are considered to be variable-sized
objects and are handled with DYNAMIC_STACKALLOC nodes.
It would be good to group aligned allocas into a single big alloca as
an optimization, but this is yet todo.
SystemZ benefits from this, due to its stack frame layout.
New tests SystemZ/alloca-03.ll for aligned allocas, and
SystemZ/alloca-04.ll for "no-realign-stack" attribute on functions.
Review and help from Ulrich Weigand and Hal Finkel.
llvm-svn: 254227
Raw profile writer needs to write all data of one kind in one continuous block,
so the buffer needs to be pre-allocated and passed to the writer method in
pieces for function profile data. The change adds the support for raw value data
writing.
llvm-svn: 254219
This is the autoconf analog of r251201. I realize autoconf is
deprecated, but while it's in tree, it should at least be kept working.
Also add the deprecation message to configure.ac such that AutoRegen
actually picks ip up.
llvm-svn: 254215
This adds two thresholds to the sample profiler to affect inlining
decisions: the concept of global hotness and coldness.
Functions that have accumulated more than a certain fraction of samples at
runtime, are annotated with the InlineHint attribute. Conversely,
functions that accumulate less than a certain fraction of samples, are
annotated with the Cold attribute.
This is very similar to the hints emitted by Clang when using
instrumentation profiles.
Notice that this is a very blunt instrument. A function may have
globally collected a significant fraction of samples, but that does not
necessarily mean that every callsite for that function is hot.
Ideally, we would annotate each callsite with the samples collected at
that callsite. This way, the inliner can incorporate all these weights
into its cost model.
Once the inliner offers this functionality, we can change the hints
emitted here to a more precise per-callsite annotation. For now, this is
providing some measure of speedups with our internal benchmarks. I've
observed speedups of up to 23% (though the geo mean is about 3%). I expect
these numbers to improve as the inliner gets better annotations.
llvm-svn: 254212
Based on testing of internal benchmarks, I'm lowering this threshold to
a value of 0.1%. This means that SamplePGO will respect 99.9% of the
original inline decisions when following a profile.
The performance difference is noticeable in some tests. With the
previous threshold, the speedups over baseline -O2 was about 0.63%. With
the new default, the speedups are around 3% on average.
The point of this threshold is not to do more aggressive inlining. When
an inlined callsite crosses this threshold, SamplePGO will redo the
inline decision so that it can better apply the input profile.
By respecting most original inline decisions, we can apply more of the
input profile because the shape of the code follows the profile more
closely.
In the next series, I'll be looking at adding some inline hints for the
cold callsites and for toplevel functions that are hot/cold as well.
llvm-svn: 254211
Now the ValueMapper has two callbacks. The first one maps the
declaration. The ValueMapper records the mapping and then materializes
the body/initializer.
llvm-svn: 254209
Summary:
Since this build attribute corresponds to a whole module, and
different functions in a module may differ in the optimizations
enabled for them, this attribute is emitted after all functions,
and only in the case that the optimization goals for all
functions match.
Reviewers: logan, hans
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14934
llvm-svn: 254201
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
Most of these instructions are the same as the 32- and 64-bit versions,
but with the type field (bits 23-22) set to 0b11. Previously the top bit
of the size field was always 0, so the instruction classes only provided
a 1-bit size field, which I have widened to 2 bits.
Differential Revision: http://reviews.llvm.org/D15014
llvm-svn: 254198
This patch changes the DFSan instrumentation for aarch64 to instead
of using fixes application mask defined by SANITIZER_AARCH64_VMA
to read the application shadow mask value from compiler-rt. The value
is initialized based on runtime VAM detection.
Along with this patch a compiler-rt one will also be added to export
the shadow mask variable.
llvm-svn: 254196
Summary:
When running tests, pass the GO_EXECUTABLE CMake
cache variable to llvm-go. The "go" binary may
not be in $PATH, or may be different to the one
passed to CMake.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14041
llvm-svn: 254187
The COFF object writer was previously adding unnecessary symbols to its
temporary data structures and cleaning them up later. This made the code
harder to understand and caused a bug (aliases classed as temporary symbols
would cause an assertion failure). A much simpler way of handling such
symbols is to ask the layout for their section-relative position when needed.
Tested with a bootstrap on Windows and by building Chrome.
Differential Revision: http://reviews.llvm.org/D14975
llvm-svn: 254183
The order in which instructions are truncated in truncateToMinimalBitwidths
effects code generation. Switch to a map with a determinisic order, since the
iteration order over a DenseMap is not defined.
This code is not hot, so the difference in container performance isn't
interesting.
Many thanks to David Blaikie for making me aware of MapVector!
Fixes PR25490.
Differential Revision: http://reviews.llvm.org/D14981
llvm-svn: 254179
I found these while trying to get a prototype to bootstrap.
They cover things like
* Handling of non linker visible stuff (append, available_externally)
* Type merging
* Alias to dropped globals
* Dropping linkage when converting to a declaration.
These should hopefully be generally useful for anyone refactoring the
plugin.
llvm-svn: 254174
GlobalAliases may reference function definitions, but not function declarations.
bugpoint would sometimes create invalid IR by deleting a function's body (thus
mutating a function definition into a declaration) without first 'fixing' any
GlobalAliases that reference that function definition.
This change iteratively prevents that issue. Before deleting a function's body,
it scans the module for GlobalAliases which reference that function. When
found, it eliminates them using replaceAllUsesWith.
Fixes PR20788.
Patch by Nick Johnson!
llvm-svn: 254171
They are as much trouble as aliases to declarations. They are requiring
the code generator to define a symbol with the same value as another
symbol, but the second symbol is undefined.
If representing this is important for some optimization, we could add
support for available_externally aliases. They would be *required* to
point to a declaration (or available_externally definition).
llvm-svn: 254170
Summary:
The bugs were:
* append, prepend, and balign were not tested
* balign takes a uimm2 not a uimm5.
* drotr32 was correctly implemented with a uimm5 but the tests expected
'52' to be valid.
* li/la were implemented with a uimm5 instead of simm32. simm32 isn't
completely correct either but I'll fix that when I get to simm32.
A notable omission are some of the shift instructions. Several of these
have been implemented using a single uimm6 instruction (rather than two
uimm5 instructions and a CodeGen-only uimm6 pseudo). These will be updated
in the uimm6 patch.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14712
llvm-svn: 254164
ARMv8.2-A adds new variants of the "at" (address translate) system
instruction, which take the PSTATE.PAN bit (added in ARMv8.1-A). These
are a required part of ARMv8.2-A, so no additional subtarget features
are required.
Differential Revision: http://reviews.llvm.org/D15018
llvm-svn: 254159
Building on r253865 the crash is not limited to signed overflows.
Disable custom handling of unsigned 32-bit and 64-bit integer divide.
Add test cases for both 32-bit and 64-bit unsigned integer overflow.
llvm-svn: 254158
ARMv8.2-A adds a new PSTATE bit, PSTATE.UAO, which allows the LDTR/STTR
instructions to behave the same as LDR/STR with respect to execute-only
pages at higher privilege levels. New variants of the MSR/MRS
instructions are added to allow reading and writing this bit. It is a
required part of ARMv8.2-A, so no additional subtarget features are
required.
Differential Revision: http://reviews.llvm.org/D15020
llvm-svn: 254157
ARMv8.2-A adds the "dc cvap" instruction, which is a system instruction
that cleans caches to the point of persistence (for systems that have
persistent memory). It is a required part of ARMv8.2-A, so no additional
subtarget features are required.
Differential Revision: http://reviews.llvm.org/D15016
llvm-svn: 254156
ARMv8.2-A adds a new ID register, ID_A64MMFR2_EL1, which behaves in the
same way as ID_A64MMFR0_EL1 and ID_A64MMFR1_EL1. It is a required part
of ARMv8.2-A, so no additional subtarget features are required.
Differential Revision: http://reviews.llvm.org/D15017
llvm-svn: 254155
This adds subtarget features for ARMv8.2-A, which builds on (and
requires the features from) ARMv8.1-A. Most assembler-visible features
of ARMv8.2-A are system instructions, and are all required parts of the
architecture, so just depend on the HasV8_2aOps subtarget feature. There
is also one large, optional feature, which adds 16-bit floating point
versions of all existing floating-point instructions (VFP and SIMD),
this is represented by the FeatureFullFP16 subtarget feature.
Differential Revision: http://reviews.llvm.org/D15013
llvm-svn: 254154
Summary:
no-odd-spreg-msa.ll: This test deliberately uses an odd-numbered register
in inline assembly and expects the compiler to insert a move to an
even-numbered register.
inlineasm-operand-code.ll and inlineasm_constraint.ll:
Checks for IAS's output will be added once a matcher bug is resolved. This bug
causes the canonical output emitted by IAS to be incorrect for uimm16 constants
with the MSB set. We will still need the non-IAS checks at this point since
these tests primarily test formatting of operands.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14705
llvm-svn: 254148
Summary:
This is because IAS will delete the comments. NFC at the moment but it will
prevent a failure once IAS is the default.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14704
llvm-svn: 254147
generated for _mm_losd_s{s,d}() intrinsics and used in scalar FMAs generated
for FMA intrinsics _mm_f{madd,msub,nmadd,nmsub}_s{s,d}().
Reviewer: David Kreitzer
Differential Revision: http://reviews.llvm.org/D14762
llvm-svn: 254140
Teach LLVM optimize to more precisely in the presence of "deopt" operand
bundles. "deopt" operand bundles imply that the call they're attached
to is at least `readonly` (i.e. they don't imply clobber semantics), and
they don't capture their bundle operands.
llvm-svn: 254118
Summary:
This returns a pointer to the dispatch packet, which can be used to load
information about the kernel dispach.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D14898
llvm-svn: 254116
This is one of the many steps to commonize value profiling support between profile
runtime and compiler/llvm tools.
After this change, profiler runtime now can share the same C APIs to do VP
serialization/deseriazation with LLVM host tools (and produces value data
in identical format between indexed and raw profile).
It is not yet enabled in profiler runtime yet.
Also added a unit test case to test runtime profile data serialization/deserialization
interfaces implemented using common closure code.
llvm-svn: 254110
Summary:
This could happen if `GetComponentNames` is true, because `Name` from
`VisitComponent` would reference a stack instance of `std::string` in
`ComputeLibsForComponents`.
Reviewers: beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14913
llvm-svn: 254108
This is a temporary fix to address ICE on 2005-10-21-longlonggtu.ll.
The proper fix will be to use A2_tfrsi, but it will need more work to
teach all users of A2_tfrsi to also expect a floating-point operand.
llvm-svn: 254099
v2: added more tests, moved the SALU->VALU conversion to a separate function
It looks like it's not possible to get subregisters in the S_ABS lowering
code, and I don't feel like guessing without testing what the correct code
would look like.
llvm-svn: 254095
If virtual registers are created late, mappings to WebAssembly
registers need to be added explicitly. This patch adds a function
to do so and teaches WebAssemblyPeephole to use it. This fixes
an out-of-bounds access on the WARegs vector.
llvm-svn: 254094
Summary:
Many target lowerings copy-paste the code to test SDValues for known constants.
This code can instead be shared in SelectionDAG.cpp, and reused in the targets.
Reviewers: MatzeB, andreadb, tstellarAMD
Subscribers: arsenm, jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D14945
llvm-svn: 254085
Instead of trying to move ARGUMENT instructions back up to the top after
they've been scheduled or sunk down, use a fake physical register to
create a liveness constraint that prevents ARGUMENT instructions from
moving down in the first place. This is still not entirely ideal, however
it is more robust than letting them move and moving them back.
llvm-svn: 254084
The e500mc does not actually support the mfocrf instruction; update the
processor definitions to reflect that fact.
Patch by Tom Rix (with some test-case cleanup by me).
llvm-svn: 254064
to a simple type when lowering a truncating store of a vector type. In this
case for an EVT we'll return Expand as we should in all of the cases anyhow.
The testcase triggered at the one in VectorLegalizer::LegalizeOp, inspection
found the rest.
llvm-svn: 254061
It was wrong order of operands (from intrinsic to DAG node).
I added more strict type specification for instruction selection.
Differential Revision: http://reviews.llvm.org/D14942
llvm-svn: 254059
1. Convert serialization methods using InstrProfRecord as source into C (impl)
interfaces using Closure.
2. Reimplement InstrProfRecord serialization method to use new C interface
as dummy wrapper.
Now it is ready to implement wrapper for runtime value profile data.
(The new code need better source location -- but not changed in this patch to
minimize diffs. )
llvm-svn: 254057
Simon Pilgrim