This relands D60376/rL358405, with the difference: sed 'y/\t/ /' -> tr '\t' ' '
BSD sed doesn't support escape characters for the 'y' command.
I didn't use it in rL358405 because it was not listed at
https://llvm.org/docs/GettingStarted.html#software but it
should be available.
Original description:
In GNU objdump, -w/--wide aligns instructions in the disassembly output.
This patch does the same to llvm-objdump. However, we always use the
wide format (-w/--wide is ignored), because the narrow format
(instructions are misaligned) is probably not very useful.
In llvm-readobj, we made a similar decision: always use the wide format,
accept but ignore -W/--wide.
To save some columns, we change the tab before hex bytes (controlled by
--[no-]show-raw-insn) to a space.
llvm-svn: 358474
This relands rL358418. It missed one test that should also use -macho
Note, all the other -private-header -exports-trie tests are used
together with -macho.
llvm-svn: 358472
Summary:
In GNU objdump, -w/--wide aligns instructions in the disassembly output.
This patch does the same to llvm-objdump. However, we always use the
wide format (-w/--wide is ignored), because the narrow format
(instructions are misaligned) is probably not very useful.
In llvm-readobj, we made a similar decision: always use the wide format,
accept but ignore -W/--wide.
To save some columns, we change the tab before hex bytes (controlled by
--[no-]show-raw-insn) to a space.
Reviewers: rupprecht, jhenderson, grimar
Reviewed By: jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60376
llvm-svn: 358405
The new value is taken from <mach/machine.h> in the MacOSX10.14 SDK from
Xcode 10.1. Update llvm-objdump and llvm-readobj accordingly.
Differential Revision: https://reviews.llvm.org/D58636
llvm-svn: 357945
The main disassembly loop is hard to read due to special handling of ARM
ELF data & ELF data. Split off the logic into two functions
dumpARMELFData and dumpELFData. Hoist some checks outside of the loop.
--start-address --stop-address have redundant checks and minor off-by-1
issues. Fix them.
llvm-svn: 357869
If the file does not end with a newline, it may be dropped. Fix the
splitting algorithm.
Also delete an unnecessary SourceCache lookup.
llvm-svn: 357858
* Use std::binary_search to replace some std::lower_bound
* Use llvm::upper_bound to replace some std::upper_bound
* Use format_hex and support::endian::read{16,32}
llvm-svn: 357853
Summary:
r354375 added support for most objdump groupings, but didn't add support for -j|--sections, because that wasn't possible.
r354870 added --disassembler options, but grouping still wasn't available.
r355185 supported values for grouped options.
This just puts the three of them together. This supports -j in modes like `-s -j .foo`, `-sj .foo`, `-sj=.foo`, or `-sj.foo`, and similar for `-M`.
Reviewers: ormris, jhenderson, ikudrin
Reviewed By: jhenderson, ikudrin
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59618
llvm-svn: 356697
Summary:
Before:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH 0x00000000001c2e61
```
After:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH $ORIGIN/../lib
```
Only a small problem here, I have no idea on choosing test case. I see there's a test
file(test/tools/llvm-objdump/private-headers-dynamic-section.test). But it has no DT_RPATH and DT_RUNPATH tags. Shall I replace the ELF file in the
Inputs dir by a new one?
Reviewers: jhenderson, grimar
Reviewed By: jhenderson
Subscribers: srhines, rupprecht, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58707
llvm-svn: 355001
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
The --disassembler-options, or -M, are used to customize
the disassembler and affect its output.
The two implemented options allow selecting register names on ARM:
* With -Mreg-names-raw, the disassembler uses rNN for all registers.
* With -Mreg-names-std it prints sp, lr and pc for r13, r14 and r15,
which is the default behavior of llvm-objdump.
Differential Revision: https://reviews.llvm.org/D57680
llvm-svn: 354870
- Tests that use multiple short switches now test them grouped and ungrouped.
- Ensure the output of ungrouped and grouped variants is identical
Differential Revision: https://reviews.llvm.org/D57904
llvm-svn: 354375
This is for -D -reloc combination.
With this patch, we do not skip the zero bytes that have a relocation against
them when -reloc is used. If -reloc is not used, then the behavior will be the same.
Differential revision: https://reviews.llvm.org/D58174
llvm-svn: 354319
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`. But I've seen in multiple CLs in LLVM the modernize style
was recommended and code was fixed based on the style, so I added it as
well.)
The common fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
- Use inline initialization for class member variables
- Use `= default` for empty constructors / destructors
- Use `using` in place of `typedef`
Reviewers: sbc100, tlively, aardappel
Subscribers: dschuff, sunfish, jgravelle-google, yurydelendik, kripken, MatzeB, mgorny, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57500
llvm-svn: 353075
See https://github.com/WebAssembly/tool-conventions/pull/95.
This is less typing and IMHO more readable, and it also fits with
our naming around the binary format which tends to use the short name.
e.g.
include/llvm/BinaryFormat/Wasm.h
tools/llvm-objdump/WasmDump.cpp
etc..
Differential Revision: https://reviews.llvm.org/D57611
llvm-svn: 353062
Summary:
Previously, llvm-nm would report symbols for .debug and .note sections as: '?' with an empty section name:
```
00000000 ?
00000000 ?
...
```
With this patch the output more closely resembles GNU nm:
```
00000000 N .debug_abbrev
00000000 n .note.GNU-stack
...
```
This patch calls `getSectionName` for sections that belong to symbols of type `ELF::STT_SECTION`, which returns the name of the section from the section string table.
Reviewers: Bigcheese, davide, jhenderson
Reviewed By: davide, jhenderson
Subscribers: rupprecht, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57105
llvm-svn: 352785
Seems when committed the r352366
("[llvm-objdump] - Print LMAs when dumping section headers.")
I resolved merge conflict incorrectly and removed this piece by mistake.
Bots did not catch this yet, seems they are slow today,
but the `X86/adjust-vma.test` test case fails locally for me without that.
llvm-svn: 352383
When --section-headers is used, GNU objdump prints both LMA and VMA for sections.
llvm-objdump does not do that what makes it's output be slightly inconsistent.
Patch teaches llvm-objdump to print LMA/VMA for ELF file formats.
The behavior for other formats remains unchanged.
Differential revision: https://reviews.llvm.org/D57146
llvm-svn: 352366
Fangrui Song