Add a column to the table of convenience variables with the equivalent
API to get to the current debugger, target, process, etc.
We often get asked to make convenience variables available outside of
the interactive interpreter. After explaining why that's not possible, a
common complaint is that it's hard to find out how to get to these
variables in a non-interactive context, for example how to get to the
current frame when given a thread. This patch aims to alleviate that by
including the APIs to navigate between these instances in the table.
Differential revision: https://reviews.llvm.org/D97778
A few cleanups suggested in another patch review's comments:
1. Use llvm:unique_function for storing & invoking callbacks from
Editline to IOHandler
2. Change return type of one of the callback setters from bool to void,
since it's return value was never used
3. Moved the callback setters inline & made them nonstatic, since that's
more consistent with other setter definitions
4. Removed the baton parameter since we no longer need it anymore
Differential revision: https://reviews.llvm.org/D50299
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
fix attempt http://reviews.llvm.org/rGbbdb4c8c9bcef0e didn't work
The problem is that the test tries to look up
llvm_orc_registerJITLoaderGDBWrapper from the llvm-jitlink.exe
executable, but the symbol wasn't exported. Just manually export it
for now. There's a FIXME with a suggestion for a real fix.
immediate build failure when Cross Unwinding enabled.
Follow up patch will cleanup some Macros handling.
Differential Revision: https://reviews.llvm.org/D97762
This is a preview of allocator support for target memory that depends on the
offload runtime API which allocates memory as described below.
llvm_omp_target_alloc_host(size_t size, int device_num);
-- Returns non-migratable memory owned by host.
-- Memory is accessible by host and device(s).
llvm_omp_target_alloc_shared(size_t size, int device_num);
-- Returns migratable memory owned by host and device.
-- Memory is accessible by host and device.
llvm_omp_target_alloc_device(size_t size, int device_num);
-- Returns memory owned by device.
-- Memory is only accessible by device.
New memory space and predefined allocator names are
-- llvm_omp_target_host_mem_space
-- llvm_omp_target_shared_mem_space
-- llvm_omp_target_device_mem_space
-- llvm_omp_target_host_mem_alloc
-- llvm_omp_target_shared_mem_alloc
-- llvm_omp_target_device_mem_alloc
Differential Revision: https://reviews.llvm.org/D96669
Implements part of P0898R3 Standard Library Concepts
Reworks D74351 to use requires-clauses over SFINAE and so that it more
closely follows the wording.
Co-authored by: Michael Schellenberger Costa <mschellenbergercosta@googlemail.com>
(Michael did all the heavy lifting and I came in to polish it for
submission, since Michael is focussing on `std::format` now.)
Reviewed By: ldionne, #libc
Differential Revision: https://reviews.llvm.org/D96657
This merges more AMDGPU ABI lowering code into the generic call
lowering. Start cleaning up by factoring away more of the pack/unpack
logic into the buildCopy{To|From}Parts functions. These could use more
improvement, and the SelectionDAG versions are significantly more
complex, and we'll eventually have to emulate all of those cases too.
This is mostly NFC, but does result in some minor instruction
reordering. It also removes some of the limitations with mismatched
sizes the old code had. However, similarly to the merge on the input,
this is forcing gfx6/gfx7 to use the gfx8+ ABI (which is what we
actually want, but SelectionDAG is stuck using the weird emergent
ABI).
This also changes the load/store size for stack passed EVTs for
AArch64, which makes it consistent with the DAG behavior.
This is a follow-up to 188b0747c1. This
is a very narrow fix to a more general problem. LLDB should be better
at distinguishing between implict and memory location descriptions.
rdar://74902042
ClangdServer already gets notified of every change, so it makes sense for it to
be the source of truth.
This is a step towards having ClangdServer expose a FS that includes dirty
buffers: D94554
Related changes:
- version is now optional for ClangdServer, to preserve our existing fuzziness
in this area (missing version ==> autoincrement)
- ClangdServer::format{File,Range} are now more regular ClangdServer functions
that don't need the code passed in. While here, combine into one function.
- incremental content update logic is moved from DraftStore to
ClangdLSPServer, with most of the implementation in SourceCode.cpp.
DraftStore is now fairly trivial, and will probably ultimately be
*replaced* by the dirty FS stuff.
Differential Revision: https://reviews.llvm.org/D97738
Windows is in the unique position of having two drivers, clang-cl and normal GNU clang, depending on whether a GNU or MSVC target is used. The current implementation with the USE_TOOLCHAIN argument assumes that when CMAKE_SYSTEM_NAME is set to Windows that clang-cl should be used, which is the incorrect choice when targeting a GNU environment.
This patch solves this problem by adding an optional TARGET_TRIPLE argument to llvm_ExternalProject_Add, which sets the various CMAKE_<LANG>_COMPILER_TARGET variables. Additionally, if the triple is detected as an MSVC environment, clang-cl and similar MSVC specific tools will be used instead of the GNU tools.
This fixes two bugs in `WebAssemblyExceptionInfo` grouping, created by
D97247. These two bugs are not easy to split into two different CLs,
because tests that fail for one also tend to fail for the other.
- In D97247, when fixing `ExceptionInfo` grouping by taking out
the unwind destination' exception from the unwind src's exception, we
just iterated the BBs in the function order, but this was incorrect;
this changes it to dominator tree preorder. Please refer to the
comments in the code for the reason and an example.
- After this subexception-taking-out fix, there still can be remaining
BBs we have to take out. When Exception B is taken out of Exception A
(because EHPad B is the unwind destination of EHPad A), there can
still be BBs within Exception A that are reachable from Exception B,
which also should be taken out. Please refer to the comments in the
code for more detailed explanation on why this can happen. To make
this possible, this splits `WebAssemblyException::addBlock` into two
parts: adding to a set and adding to a vector. We need to iterate on
BBs within a `WebAssemblyException` to fix this, so we add BBs to sets
first. But we add BBs to vectors later after we fix all incorrectness
because deleting BBs from vectors is expensive. I considered removing
the vector from `WebAssemblyException`, but it was not easy because
this class has to maintain a similar interface with `MachineLoop` to
be wrapped into a single interface `SortRegion`, which is used in
CFGSort.
Other misc. drive-by fixes:
- Make `WebAssemblyExceptionInfo` do not even run when wasm EH is not
used or the function doesn't have any EH pads, not to waste time
- Add `LLVM_DEBUG` lines for easy debugging
- Fix `preds` comments in cfg-stackify-eh.ll
- Fix `__cxa_throw`'s signature in cfg-stackify-eh.ll
Fixes https://github.com/emscripten-core/emscripten/issues/13554.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D97677
Even when MemorySSA-based LICM is used, an AST is still populated
for scalar promotion. As the AST has quadratic complexity, a lot
of time is spent in this step despite the existing access count
limit. This patch optimizes the identification of promotable stores.
The idea here is pretty simple: We're only interested in must-alias
mod sets of loop invariant pointers. As such, only populate the AST
with loop-invariant loads and stores (anything else is definitely
not promotable) and then discard any sets which alias with any of
the remaining, definitely non-promotable accesses.
If we promoted something, check whether this has made some other
accesses loop invariant and thus possible promotion candidates.
This is much faster in practice, because we need to perform AA
queries for O(NumPromotable^2 + NumPromotable*NumNonPromotable)
instead of O(NumTotal^2), and NumPromotable tends to be small.
Additionally, promotable accesses have loop invariant pointers,
for which AA is cheaper.
This has a signicant positive compile-time impact. We save ~1.8%
geomean on CTMark at O3, with 6% on lencod in particular and 25%
on individual files.
Conceptually, this change is NFC, but may not be so in practice,
because the AST is only an approximation, and can produce
different results depending on the order in which accesses are
added. However, there is at least no impact on the number of promotions
(licm.NumPromoted) in test-suite O3 configuration with this change.
Differential Revision: https://reviews.llvm.org/D89264
Andrei Matei reported a llvm11 core dump for his bpf program
https://bugs.llvm.org/show_bug.cgi?id=48578
The core dump happens in LiveVariables analysis phase.
#4 0x00007fce54356bb0 __restore_rt
#5 0x00007fce4d51785e llvm::LiveVariables::HandleVirtRegUse(unsigned int,
llvm::MachineBasicBlock*, llvm::MachineInstr&)
#6 0x00007fce4d519abe llvm::LiveVariables::runOnInstr(llvm::MachineInstr&,
llvm::SmallVectorImpl<unsigned int>&)
#7 0x00007fce4d519ec6 llvm::LiveVariables::runOnBlock(llvm::MachineBasicBlock*, unsigned int)
#8 0x00007fce4d51a4bf llvm::LiveVariables::runOnMachineFunction(llvm::MachineFunction&)
The bug can be reproduced with llvm12 and latest trunk as well.
Futher analysis shows that there is a bug in BPF peephole
TRUNC elimination optimization, which tries to remove
unnecessary TRUNC operations (a <<= 32; a >>= 32).
Specifically, the compiler did wrong transformation for the
following patterns:
%1 = LDW ...
%2 = SLL_ri %1, 32
%3 = SRL_ri %2, 32
... %3 ...
%4 = SRA_ri %2, 32
... %4 ...
The current transformation did not check how many uses of %2
and did transformation like
%1 = LDW ...
... %1 ...
%4 = SRL_ri %2, 32
... %4 ...
and pseudo register %2 is used by not defined and
caused LiveVariables analysis core dump.
To fix the issue, when traversing back from SRL_ri to SLL_ri,
check to ensure SLL_ri has only one use. Otherwise, don't
do transformation.
Differential Revision: https://reviews.llvm.org/D97792
This reverts diff D97610 (commit 0223ab035c) and adds a one-line fix to verify that a `MemoryBufferRef` has sufficient length before reading a 4-byte magic number.
Differential Revision: https://reviews.llvm.org/D97757
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
Some variables are unused after D97383 landed. We should generate one symbol for one attrUse.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D97794
Normally, the run.py wrapper script runs the child processes in
a clean environment, with only the environment variables available
that are passed via the --env parameter.
However, the COMSPEC and TEMP variables are kind of necessary when
running some tests; COMSPEC is necessary for finding the interpreter
when executing commands via std::system().
Before f1a96de1bc, tests were executed
via an intermediate shell which implicitly readded the COMSPEC variable.
The TEMP variable allows temp files to be placed in a sensible
location; if unset, they're placed in the default temp fallback of
C:\Windows instead.
Differential Revision: https://reviews.llvm.org/D97452
On windows, going ahead and actually trying to create the directory
doesn't return an error code that maps to
std::errc::not_a_directory in this case.
This fixes two cases of
TEST_CHECK(ErrorIs(ec, std::errc::not_a_directory))
in filesystems/fs.op.funcs/fs.op.create_directories/create_directories.pass.cpp
for windows (in testcases added in 59c72a7012).
Differential Revision: https://reviews.llvm.org/D97090
Instead of converting the 0 into a ZR reg during lowering, do that with
tablegen by matching the zero immediate. This when combined with other
optimizations is more likely to use ZR and helps keep the DAG more
easily optimizable. It should not otherwise effect code generation.
When a large "irregular" (e.g. i96) integer call argument is converted to
indirect, 64-bit parts are stored to the stack. The full stack space
(e.g. i128) was not allocated prior to this patch, but rather just the exact
space of the original type. This caused neighboring values on the stack to be
overwritten.
Thanks to Josh Stone for reporting this.
Review: Ulrich Weigand
Fixes https://bugs.llvm.org/show_bug.cgi?id=49322
Differential Revision: https://reviews.llvm.org/D97514
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
Make OMod explicit instead of implied by HasModifiers in the
operand list. Requires explicitly setting HasOMod=1 for
irregular OMod usage in instruction V_CVT_{U,I}*
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D97587
Change-Id: I230e1476f529e816eec60e242531f23a99e3839f
If the destructor is trivial (_LIBCPP_HAS_TRIVIAL_CONDVAR_DESTRUCTION,
the constructor always is), the compiler warns about the
std::condition_variable being unused.
Add a cast to void to silence the warning about the object being unused.
Differential Revision: https://reviews.llvm.org/D97540
Several contributors have been asking me how to reproduce the CI
environment locally. This is the last step towards making that work
out-of-the-box. Basically, just run `libcxx/utils/ci/run-buildbot-container`
and you're good to go.
Differential Revision: https://reviews.llvm.org/D97782
Fix regression where we aren't passing `-platform_version` to new ld64.lld after {D95204}.
Most of the changes were originally in D95204, but I backed them out due to
test failures on builds which have `CLANG_DEFAULT_LINKER=lld`. The tests are
properly updated in this diff.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D97741
This patch provides a fix for the `fdefault-*` family in f18
(Please consult `D96344` for details)
Differential Revision: https://reviews.llvm.org/D97724
Currently, it was delibrately impleneted to not handle this case, but as it has turnt out, we need this feature.
The concrete use case is
`System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa` reexports
/System/Library/Frameworks/AppKit.framework/Versions/C/AppKit , which then rexports
/System/Library/PrivateFrameworks/UIFoundation.framework/Versions/A/UIFoundation
The current implemention uses a global currentTopLevelTapi, which is not reset until it finishes loading the whole tree.
This is a problem because if the top-level is set to Cocoa, then when we get to UIFoundation, it will try to find UIFoundation in the current top level, which is Cocoa and will not find it.
The right thing should be:
- When loading a library from a TBD file, re-exports need to be looked up in the auxiliary documents within the same TBD.
- When loading from an actual dylib, no additional TBD documents need to be examined.
- In no case does a re-export mentioned in one TBD file need to be looked up in a document in an auxiliary document from a different TBD file
Differential Revision: https://reviews.llvm.org/D97438
There is a function attribute 'nomerge' in addition to 'noduplicate'
and 'convergent'. Both 'noduplicate' and 'convergent' have corresponding
intrinsic properties. This patch adds an intrinsic property for the
'nomerge' attribute.
Differential Revision: https://reviews.llvm.org/D96364
This patch enables support for lowering INSERT_VECTOR_ELT on
fixed-length vector types. The strategy follows that for scalable vector
types.
This patch also includes a quick fix to prevent the compiler infinitely
looping between lowering BUILD_VECTOR as VECTOR_SHUFFLE and back again.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97698
Browsing macro-generated symbols is confusing.
On the one hand, it seems very *useful* to be able to see the summary of
symbols that were generated.
On the other hand, some macros spew a lot of confusing symbols into the
namespace and when used repeatedly (ABSL_FLAG) can create a lot of spam
that's hard to navigate.
Design constraints:
- the macro expansion tree need not align with the AST, though it often
does in practice.
We address this by defining the nesting based on the *primary*
location of decls, rather than their ranges.
- DocumentSymbol.children[*].range should nest within DocumentSymbol.range
(This constraint is not in LSP "breadcrumbs" breaks without it)
We adjust macro ranges so they cover their "children", rather than
just the macro expansion
- LSP does not have a "macro expansion" symbolkind, nor does it allow a
symbol to have no kind. I've arbitrarily picked "null" as this is
unlikely to conflict with anything useful.
This patch makes all macros and children visible for simplicity+consistency,
though in some cases it may be better to elide the macro node.
We may consider adding heuristics for this in future (e.g. when it expands
to one decl only?) but it doesn't seem clear-cut to me.
Differential Revision: https://reviews.llvm.org/D97615
For the cases of two clobbering loads and one loaded object is fully contained
in the second `BasicAAResult::aliasGEP` returns just `PartialAlias` that
is actually more common case of partial overlap, it doesn't say anything about
actual overlapping sizes.
AA users such as GVN and DSE have no functionality to estimate aliasing of GEPs
with non-constant offsets. The change stores estimated relative offsets so they
can be used further.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93529
__builtin_isinf currently generates a floating-point compare operation
which triggers a trap when faced with a signaling NaN in StrictFP mode.
This commit uses integer operations instead to not generate any trap in
such a case.
Reviewed By: mibintc
Differential Revision: https://reviews.llvm.org/D97125
Jonas Devlieghere