Summary:
This change adds two new parameters to the statepoint intrinsic, `i64 id`
and `i32 num_patch_bytes`. `id` gets propagated to the ID field
in the generated StackMap section. If the `num_patch_bytes` is
non-zero then the statepoint is lowered to `num_patch_bytes` bytes of
nops instead of a call (the spill and reload code remains unchanged).
A non-zero `num_patch_bytes` is useful in situations where a language
runtime requires complete control over how a call is lowered.
This change brings statepoints one step closer to patchpoints. With
some additional work (that is not part of this patch) it should be
possible to get rid of `TargetOpcode::STATEPOINT` altogether.
PlaceSafepoints generates `statepoint` wrappers with `id` set to
`0xABCDEF00` (the old default value for the ID reported in the stackmap)
and `num_patch_bytes` set to `0`. This can be made more sophisticated
later.
Reviewers: reames, pgavlin, swaroop.sridhar, AndyAyers
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9546
llvm-svn: 237214
Responding to review feedback from http://reviews.llvm.org/D9585
1) Remove a variable shadow by converting the outer loop to a range for loop. We never really used the 'i' variable which was being shadowed.
2) Reduce DominatorTree recalculations by passing the DT to SplitEdge.
llvm-svn: 237212
checking and make the cache faster and smaller.
I had thought that using an APInt here would be useful, but I think
I was just wrong. Notably, we don't have to do any fancy overflow
checking, we can just bound the values as quite small and do the math in
a higher precision integer. I've switched to a signed integer so that
UBSan will even point out if we ever have integer overflow. I've added
various asserts to try to catch things as well and hoisted the overflow
checks so that we just leave the too-large offsets out of the SCEV-GEP
cache. This makes the value in the cache quite a bit smaller which is
probably worthwhile.
No functionality changed here (for trip counts under 1 billion).
llvm-svn: 237209
Summary:
If the branch that leads to the PHI node and the Select instruction
depend on correlated conditions, we might be able to directly use the
corresponding value from the Select instruction as the incoming value
for the PHI node, allowing later removal of the select instruction.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9051
llvm-svn: 237201
When relocating a pointer, we need to determine a base pointer for the derived pointer being relocated. We have limited support for handling a pointer extracted from a vector; the current code only handled the case where the entire vector was known to contain base pointers. This patch extends the reasoning to handle chains of insertelements where the indices are constants. This case turns out to be fairly common in vectorized code. We can now handle vectors which contains mixtures of base and derived pointers provided the insertelements use constant indices.
Note that this doesn't solve the general problem. To handle variable indexed insertelements, we'd need to scalarize and introduce conditional branching based on the index. Alternatively, we could eagerly scalarize, but the code structure doesn't currently make either fix easy. The patch also doesn't handle shufflevector or other vector manipulation for much the same reasons. I plan to defer this work until I have a motivating test case.
Differential Revision: http://reviews.llvm.org/D9676
llvm-svn: 237200
The pass doesn't actually modify the module outside of the function being processed. The only confusing piece is that it both inserts calls and then inlines the resulting calls. Given that, it definitely invalidates module level analysis results, but many FunctionPasses do that.
Differential Revision: http://reviews.llvm.org/D9590
llvm-svn: 237185
Switch from using a LoopPass to using a FunctionPass for the internal helper analysis pass. The next step is going to be to make this a true analysis pass which is required by the PlaceSafepoints pass itself.
p.s. The interesting semantic part here is that we're changing the iteration order over the loops. It shouldn't matter, but that's the reason to separate this into it's own distinct patch.
Differential Revision: http://reviews.llvm.org/D9588
llvm-svn: 237180
The old code computed dominators for every loop. This was terribly slow with no good reason. Just use the standard infrastructure for analysis passes.
Differential Revision: http://reviews.llvm.org/D9586
llvm-svn: 237176
As a step towards getting rid of internal pass manager hack entirely, remove the need for loop simplify to run in the inner pass manager. The new code does produce slightly different loop structures, so this isn't technically NFC.
Differential Revision: http://reviews.llvm.org/D9585
llvm-svn: 237172
We already had a method to iterate over all the incoming values of a PHI. This just changes all eligible code to use it.
Ineligible code included anything which cared about the index, or was also trying to get the i'th incoming BB.
llvm-svn: 237169
Summary:
This patch reimplements heuristic that tries to estimate optimization beneftis
from complete loop unrolling.
In this patch I kept the minimal changes - e.g. I removed code handling
branches and folding compares. That's a promising area, but now there
are too many questions to discuss before we can enable it.
Test Plan: Tests are included in the patch.
Reviewers: hfinkel, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8816
llvm-svn: 237156
Summary:
This patch is to rename some variables to CamelCase in gc_relocate
related functions. There is no functionality change.
Patch by Chen Li!
Reviewers: reames, AndyAyers, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9681
llvm-svn: 237069
This fixes another miscompile introduced by r235232: when there was a
dependency on the memcpy destination other than the memset, we would
ignore it, because we only looked at the source dependency.
It was a mistake to use SrcDepInfo. Instead, just use DepInfo.
llvm-svn: 237066
runOnCountable() allowed the caller to call on a loop without a
predictable backedge-taken count. Change the code so that only loops
with computable backdge-count can call this function, in order to catch
abuses.
llvm-svn: 237044
Summary:
In RewriteStatepointsForGC pass, we create a gc_relocate intrinsic for
each relocated pointer, and the gc_relocate has the same type with the
pointer. During the creation of gc_relocate intrinsic, llvm requires to
mangle its type. However, llvm does not support mangling of all possible
types. RewriteStatepointsForGC will hit an assertion failure when it
tries to create a gc_relocate for pointer to vector of pointers because
mangling for vector of pointers is not supported.
This patch changes the way RewriteStatepointsForGC pass creates
gc_relocate. For each relocated pointer, we erase the type of pointers
and create an unified gc_relocate of type i8 addrspace(1)*. Then a
bitcast is inserted to convert the gc_relocate to the correct type. In
this way, gc_relocate does not need to deal with different types of
pointers and the unsupported type mangling is no longer a problem. This
change would also ease further merge when LLVM erases types of pointers
and introduces an unified pointer type.
Some minor changes are also introduced to gc_relocate related part in
InstCombineCalls, CodeGenPrepare, and Verifier accordingly.
Patch by Chen Li!
Reviewers: reames, AndyAyers, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9592
llvm-svn: 237009
The QPX single-precision load/store intrinsics have implied
truncation/extension from/to the declared value type of <4 x double> to the
memory type of <4 x float>. When we can prove the alignment of the pointer
argument, and thus replace the intrinsic with a regular load or store, we need
to load or store the correct data type (<4 x float>) instead of (<4 x double>).
llvm-svn: 236973
Second attempt; instead of using a named local variable, passing
arguments directly to `createSanitizerCtorAndInitFunctions` worked
on Windows.
Reviewers: kcc, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8780
llvm-svn: 236951
Clang regressions were caused by more stringent assertion checking
introduced by this change. Small fix needed to clang has been committed
in r236751.
llvm-svn: 236752
Summary:
One step further getting aggregate loads and store being optimized
properly. This will only handle struct with one element at this point.
Test Plan: Added unit tests for the new supported cases.
Reviewers: chandlerc, joker-eph, joker.eph, majnemer
Reviewed By: majnemer
Subscribers: pete, llvm-commits
Differential Revision: http://reviews.llvm.org/D8339
Patch by Amaury Sechet.
From: Amaury Sechet <amaury@fb.com>
llvm-svn: 236695
Summary:
This gives frontend more precise control over collected coverage
information. User can still override these options by passing
-mllvm flags.
No functionality change.
Test Plan: regression test suite.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9539
llvm-svn: 236687
If we have recognized that a conditional is constant at a particular location in the code (while trying to decide if we can simplify a conditional branch), we can eagerly replace that condition with a constant if it's definition is post dominated by the branch in question.
In practice, this ends up being a compile time savings at most. JumpThreading would have visited each using branch anyways. CVP would have visited the cmp itself again. Unless LVI gives up early, we shouldn't gain any addition power by doing this transformation early. What we do gain is simplicity and compile time.
Differential Revision: http://reviews.llvm.org/D9312
llvm-svn: 236684
Renames the original CreateGCStatepoint to CreateGCStatepointCall, and
moves invoke creating functionality from PlaceSafepoints.cpp to
IRBuilder.cpp.
This changes the labels generated for PlaceSafepoints/invokes.ll so use
a regex there to make the basic block labels more resilient.
llvm-svn: 236672
This makes use of the new API which can remove attributes from a set given a builder.
This is much faster than creating a temporary set and reduces llc time by about 0.3% which was all spent creating temporary attributes sets on the context.
llvm-svn: 236668
Summary:
This helper function creates a ctor function, which calls sanitizer's
init function with given arguments. This constructor is then expected
to be added to module's ctors. The patch helps unifying how sanitizer
constructor functions are created, and how init functions are called
across all sanitizers.
Reviewers: kcc, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8777
llvm-svn: 236627
The patch disabled unrolling in loop vectorization pass when VF==1 on x86 architecture,
by setting MaxInterleaveFactor to 1. Unrolling in loop vectorization pass may introduce
the cost of overflow check, memory boundary check and extra prologue/epilogue code when
regular unroller will unroll the loop another time. Disable it when VF==1 remove the
unnecessary cost on x86. The same can be done for other platforms after verifying
interleaving/memory bound checking to be not perf critical on those platforms.
Differential Revision: http://reviews.llvm.org/D9515
llvm-svn: 236613
I folded the check for the flag -verify-dom-info into the only caller
where I think it is supposed to be checked: verifyAnalysis. (The idea
of the flag is to enable this expensive verification in
verifyPreservedAnalysis.)
I'm assuming that when manually scheduling the verification pass
with -passes=verify<domtree>, we do want to perform the verification.
llvm-svn: 236575
COMDAT groups which have become rendered unused because of inline are
discardable if we can prove that we've made the group empty.
This fixes PR22285.
llvm-svn: 236539
This change is the second of 3 patches to add support for specifying
the profile output from the command line via -fprofile-instr-generate=<path>,
where the specified output path/file will be overridden by the
LLVM_PROFILE_FILE environment variable.
This patch adds the necessary support to the llvm instrumenter, specifically
a new member of GCOVOptions for clang to save the specified filename, and
support for calling the new compiler-rt interface from __llvm_profile_init.
Patch by Teresa Johnson. Thanks!
llvm-svn: 236288
When optimizing demanded bits of the operands of an Add we have to
remove the nsw/nuw flags as we have no guarantee anymore that we don't
wrap. This is legal here because the top bit is not demanded. In fact
this operaion was already performed but missed in the case of an Add
with a constant on the right side. To fix this this patch refactors the
code to unify the code paths in SimplifyDemandedUseBits() handling of
Add/Sub:
- The transformation of Add->Or is removed from the simplify demand
code because the equivalent transformation exists in
InstCombiner::visitAdd()
- KnownOnes/KnownZero are not adjusted for Add x, C anymore as
computeKnownBits() already performs these computations.
- The simplification of the operands is unified. In this new version
constant on the right side of a Sub are shrunk now as I could not find
a reason why not to do so.
- The special case for clearing nsw/nuw in ShrinkDemandedConstant() is
not necessary anymore as the caller does that already.
Differential Revision: http://reviews.llvm.org/D9415
llvm-svn: 236269
The rule that turns a sub to xor if the LHS is 2^n-1 and the remaining bits
are known zero, does not use the demanded bits at all: Move it to the
normal InstCombine code path.
Differential Revision: http://reviews.llvm.org/D9417
llvm-svn: 236268
Summary:
Optimizing these well are especially interesting for IRCE since it
"clamps" values by generating this sort of pattern through SCEV
expressions.
Depends on D9352.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9353
llvm-svn: 236203
Summary:
After this change `MatchSelectPattern` recognizes the following form
of SMIN:
Y >s C ? ~Y : ~C == ~Y <s ~C ? ~Y : ~C = SMIN(~Y, ~C)
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9352
llvm-svn: 236202
Many of the callers already have the pointer type anyway, and for the
couple of callers that don't it's pretty easy to call PointerType::get
on the pointee type and address space.
This avoids LLParser from using PointerType::getElementType when parsing
GlobalAliases from IR.
llvm-svn: 236160
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
There can be various constant pointers in the IR which do not get relocated at a safepoint. One example is the address of a global variable. Another example is a pointer created via inttoptr. Note that the optimizer itself likes to create such inttoptrs when locally propagating constants through dynamically dead code.
To deal with this, we need to exclude uses of constants from contributing to the liveness of a safepoint which might reach that use. At some later date, it might be worth exploring what could be done to support the relocation of various special types of "constants", but that's future work.
Differential Revision: http://reviews.llvm.org/D9236
llvm-svn: 235821
llvm.frameescape() intrinsic is not a real call. The intrinsic can only exist in the entry block. Inserting a gc.statepoint() before llvm.frameescape() may split the entry block, and push the intrinsic out of the entry block.
Patch by: Swaroop.Sridhar@microsoft.com
Differential Revision: http://reviews.llvm.org/D8910
llvm-svn: 235820
This is a follow-on to D8833 (insertps optimization when the zero mask is not used).
In this patch, we check for the case where the zmask is used, but both input vectors
to the insertps intrinsic are the same operand or the zmask overrides the destination
lane. This lets us replace the 2nd shuffle input operand with the zero vector.
Differential Revision: http://reviews.llvm.org/D9257
llvm-svn: 235810
When using bit tests for hole checks, we call AddPredecessorToBlock to give the
phi node a value from the bit test block. This would break if we've
previously called removePredecessor on the default destination because the
switch is fully covered.
Test case by Mark Lacey.
llvm-svn: 235771
(reverted in r235533)
Original commit message:
"Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)"
The remapping done in ValueMapper for LTO was insufficient as the types
weren't correctly mapped (though I was using the post-mapped operands,
some of those operands might not have been mapped yet so the type
wouldn't be post-mapped yet). Instead use the pre-mapped type and
explicitly map all the types.
llvm-svn: 235651
Move isDereferenceablePointer function to Analysis. This function recursively tracks dereferencability over a chain of values like other functions in ValueTracking.
This refactoring is motivated by further changes to support dereferenceable_or_null attribute (http://reviews.llvm.org/D8650). isDereferenceablePointer will be extended to perform context-sensitive analysis and IR is not a good place to have such functionality.
Patch by: Artur Pilipenko <apilipenko@azulsystems.com>
Differential Revision: reviews.llvm.org/D9075
llvm-svn: 235611
This patch refactors the definition of common utility function "isInductionPHI" to LoopUtils.cpp.
This fixes compilation error when configured with -DBUILD_SHARED_LIBS=ON
llvm-svn: 235577
Only clear out the NSW/NUW flags if we are optimizing 'add'/'sub' while
taking advantage that the sign bit is not set. We do this optimization
to further shrink the mask but shrinking the mask isn't NSW/NUW
preserving in this case.
llvm-svn: 235558
An nsw/nuw operation relies on the values feeding into it to not
overflow if 'poison' is not to be produced. This means that
optimizations which make modifications to the bottom of a chain (like
SimplifyDemandedBits) must strip out nsw/nuw if they cannot ensure that
they will be preserved.
This fixes PR23309.
llvm-svn: 235544
This reverts commit r235458.
It looks like this might be breaking something LTO-ish. Looking into it
& will recommit with a fix/test case/etc once I've got more to go on.
llvm-svn: 235533
Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)
llvm-svn: 235458
https://llvm.org/bugs/show_bug.cgi?id=23163.
Gep merging sometimes behaves like a reverse CSE/LICM optimization,
which has negative impact on performance. In this patch we restrict
gep merging to happen only when the indexes to be merged are both consts,
which ensures such merge is always beneficial.
The patch makes gep merging only happen in very restrictive cases.
It is possible that some analysis/optimization passes rely on the merged
geps to get better result, and we havn't notice them yet. We will be ready
to further improve it once we see the cases.
Differential Revision: http://reviews.llvm.org/D8911
llvm-svn: 235455
https://llvm.org/bugs/show_bug.cgi?id=23163.
Gep merging sometimes behaves like a reverse CSE/LICM optimizations,
which has negative impact on performance. In this patch we restrict
gep merging to happen only when the indexes to be merged are both consts,
which ensures such merge is always beneficial.
The patch makes gep merging only happen in very restrictive cases.
It is possible that some analysis/optimization passes rely on the merged
geps to get better result, and we havn't notice them yet. We will be ready
to further improve it once we see the cases.
Differential Revision: http://reviews.llvm.org/D9007
llvm-svn: 235451
MemIntrinsic::getDest() looks through pointer casts, and using it
directly when building the new GEP+memset results in stuff like:
%0 = getelementptr i64* %p, i32 16
%1 = bitcast i64* %0 to i8*
call ..memset(i8* %1, ...)
instead of the correct:
%0 = bitcast i64* %p to i8*
%1 = getelementptr i8* %0, i32 16
call ..memset(i8* %1, ...)
Instead, use getRawDest, which just gives you the i8* value.
While there, use the memcpy's dest, as it's live anyway.
In most cases, when the optimization triggers, the memset and memcpy
sizes are the same, so the built memset is 0-sized and eliminated.
The problem occurs when they're different.
Fixes a regression caused by r235232: PR23300.
llvm-svn: 235419
Summary:
This lets us use range based for loops.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9169
llvm-svn: 235416
Summary:
After we rewrite a candidate, the instructions used by the old form may
become unused. This patch cleans up these unused instructions so that we
needn't run DCE after SLSR.
Test Plan: removed -dce in all the SLSR tests
Reviewers: broune, meheff
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9101
llvm-svn: 235410
Summary: so that we needn't run DCE after this pass.
Test Plan: removed -dce from the commandline in split-gep.ll and split-gep-and-gvn.ll
Reviewers: meheff
Subscribers: llvm-commits, HaoLiu, hfinkel, jholewinski
Differential Revision: http://reviews.llvm.org/D9096
llvm-svn: 235409
Summary:
MemorySSA uses this algorithm as well, and this enables us to reuse the code in both places.
There are no actual algorithm or datastructure changes in here, just code movement.
Reviewers: qcolombet, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9118
llvm-svn: 235406
Remove early returns for when `getVariable()` is null, and just assert
that it never happens. The Verifier already confirms that there's a
valid variable on these intrinsics, so we should assume the debug info
isn't broken. I also updated a check for a `!dbg` attachment, which the
Verifier similarly guarantees.
llvm-svn: 235400
This commit fixes the code which adds lifetime markers in InlineFunction to skip
zero-sized allocas instead of asserting on them.
rdar://problem/20531155
llvm-svn: 235312
This patch refactors reduction identification code out of LoopVectorizer and
exposes them as common utilities.
No functional change.
Review: http://reviews.llvm.org/D9046
llvm-svn: 235284
Harden r235258 to support any integer bitwidth. The quick glance at
the reference made me think only i32 and i64 were valid types, but
they're not special, so any overload is legal.
Thanks to David Majnemer for noticing!
llvm-svn: 235261
Followup to r235232, which caused PR23278.
We can't assume the memset and memcpy sizes have the same type, as
nothing in the language reference prevents that.
Instead, zext both to i64 if they disagree.
While there, robustify tests by using i8 %c rather than i8 0 for the
memset character.
llvm-svn: 235258
Stop using `DIDescriptor` and its subclasses in the `DebugInfoFinder`
API, as well as the rest of the API hanging around in `DebugInfo.h`.
llvm-svn: 235240
A common idiom in some code is to do the following:
memset(dst, 0, dst_size);
memcpy(dst, src, src_size);
Some of the memset is redundant; instead, we can do:
memcpy(dst, src, src_size);
memset(dst + src_size, 0,
dst_size <= src_size ? 0 : dst_size - src_size);
Original patch by: Joel Jones
Differential Revision: http://reviews.llvm.org/D498
llvm-svn: 235232
Summary:
An alternative is to use a worklist approach. However, that approach
would break the traversing order so that we couldn't lookup SeenExprs
efficiently. I don't see a clear winner here, so I picked the easier approach.
Along with two minor improvements:
1. preserves ScalarEvolution by forgetting instructions replaced
2. removes dead code locally avoiding the need of running DCE afterwards
Test Plan: add to slsr-add.ll a test that requires multiple iterations
Reviewers: broune, dberlin, atrick, meheff
Reviewed By: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9058
llvm-svn: 235151
Summary:
This fixes a left-over efficiency issue in D8950.
As Andrew and Daniel suggested, we can store the candidates in a stack
and pop the top element when it does not dominate the current
instruction. This reduces the worst-case time complexity to O(n).
Test Plan: a new test in nary-add.ll that exercises this optimization.
Reviewers: broune, dberlin, meheff, atrick
Reviewed By: atrick
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D9055
llvm-svn: 235129
This is very similar to D8486 / r232852 (vperm2). If we treat insertps intrinsics
as shufflevectors, we can optimize them better.
I've left all but the full zero case of the zero mask variants out of this patch.
I don't think those can be converted into a single shuffle in all cases, but I'd
be happy to be proven wrong as I was for vperm2f128.
Either way, we'd need to support whatever sequence we come up with for those cases
in the backend before converting them here.
Differential Revision: http://reviews.llvm.org/D8833
llvm-svn: 235124
Remove 'inlinedAt:' from MDLocalVariable. Besides saving some memory
(variables with it seem to be single largest `Metadata` contributer to
memory usage right now in -g -flto builds), this stops optimization and
backend passes from having to change local variables.
The 'inlinedAt:' field was used by the backend in two ways:
1. To tell the backend whether and into what a variable was inlined.
2. To create a unique id for each inlined variable.
Instead, rely on the 'inlinedAt:' field of the intrinsic's `!dbg`
attachment, and change the DWARF backend to use a typedef called
`InlinedVariable` which is `std::pair<MDLocalVariable*, MDLocation*>`.
This `DebugLoc` is already passed reliably through the backend (as
verified by r234021).
This commit removes the check from r234021, but I added a new check
(that will survive) in r235048, and changed the `DIBuilder` API in
r235041 to require a `!dbg` attachment whose 'scope:` is in the same
`MDSubprogram` as the variable's.
If this breaks your out-of-tree testcases, perhaps the script I used
(mdlocalvariable-drop-inlinedat.sh) will help; I'll attach it to PR22778
in a moment.
llvm-svn: 235050
Change `DIBuilder::insertDeclare()` and `insertDbgValueIntrinsic()` to
take an `MDLocation*`/`DebugLoc` parameter which it attaches to the
created intrinsic. Assert at creation time that the `scope:` field's
subprogram matches the variable's. There's a matching `clang` commit to
use the API.
The context for this is PR22778, which is removing the `inlinedAt:`
field from `MDLocalVariable`, instead deferring to the `!dbg` location
attached to the debug info intrinsic. The best way to ensure we always
have a `!dbg` attachment is to require one at creation time. I'll be
adding verifier checks next, but this API change is the best way to
shake out frontend bugs.
Note: I added an `llvm_unreachable()` in `bindings/go` and passed in
`nullptr` for the `DebugLoc`. The `llgo` folks will eventually need to
pass a valid `DebugLoc` here.
llvm-svn: 235041
Summary:
With this patch, SLSR may rewrite
S1: X = B + i * S
S2: Y = B + i' * S
to
S2: Y = X + (i' - i) * S
A secondary improvement: if (i' - i) is a power of 2, emit Y as X + (S << log(i' - i)). (S << log(i' -i)) is in a canonical form and thus more likely GVN'ed than (i' - i) * S.
Test Plan: slsr-add.ll
Reviewers: hfinkel, sanjoy, meheff, broune, eliben
Reviewed By: eliben
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8983
llvm-svn: 235019
Summary:
This transformation reassociates a n-ary add so that the add can partially reuse
existing instructions. For example, this pass can simplify
void foo(int a, int b) {
bar(a + b);
bar((a + 2) + b);
}
to
void foo(int a, int b) {
int t = a + b;
bar(t);
bar(t + 2);
}
saving one add instruction.
Fixes PR22357 (https://llvm.org/bugs/show_bug.cgi?id=22357).
Test Plan: nary-add.ll
Reviewers: broune, dberlin, hfinkel, meheff, sanjoy, atrick
Reviewed By: sanjoy, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8950
llvm-svn: 234855
Change `DICompileUnit::replaceSubprograms()` and
`DICompileUnit::replaceGlobalVariables()` to match the `MDCompileUnit`
equivalents that they're wrapping.
llvm-svn: 234852
Gut the `DIDescriptor` wrappers around `MDLocalScope` subclasses. Note
that `DILexicalBlock` wraps `MDLexicalBlockBase`, not `MDLexicalBlock`.
llvm-svn: 234850
Summary:
Runtime unrolling of loops needs to emit an expression to compute the
loop's runtime trip-count. Avoid runtime unrolling if this computation
will be expensive.
Depends on D8993.
Reviewers: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8994
llvm-svn: 234846
Summary:
Move isHighCostExpansion from IndVarSimplify to SCEVExpander. This
exposed function will be used in a subsequent change.
Reviewers: bogner, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8995
llvm-svn: 234844
Gut all the non-pointer API from the variable wrappers, except an
implicit conversion from `DIGlobalVariable` to `DIDescriptor`. Note
that if you're updating out-of-tree code, `DIVariable` wraps
`MDLocalVariable` (`MDVariable` is a common base class shared with
`MDGlobalVariable`).
llvm-svn: 234840
This is along the same lines as r234832, but for `DILocation`. Clean
out all accessors from `DILocation`. Any callers should be using
`MDLocation` directly (e.g., via `operator->()`).
llvm-svn: 234835
Completely gut `DIExpression`, turning it into a simple wrapper around
`MDExpression *`. There are two bits of magic left:
- It's constructed from `const MDExpression*` but convertible to
`MDExpression*`.
- It's default-constructed to `nullptr`.
Otherwise, it should behave quite like a raw pointer. Once I've done
the same to the rest of the `DIDescriptor` subclasses, I'll come back to
delete them entirely (and update call sites as necessary to deal with
the missing magic).
llvm-svn: 234832
Before we had real liveness, we needed to track every value that base pointer
insertion code created because these now might be live. We now just rerun
the data flow liveness algorithm (which is actually faster!) and no longer
need the associated code.
llvm-svn: 234827
As documented in PR23200 (and the FIXMEs I've added to the code here),
this logic is fairly broken: it modifies the `LLVMContext` in a way that
affects other modules and cannot be serialized to assembly/bitcode. For
now, move it over to `MDLocation::computeNewDiscriminators()` anyway.
llvm-svn: 234825
I don't see a reason to add the `copyWithNewScope()` API over to
`MDLocation` -- it seems to be a holdover from when creating locations
required knowing details of operand layout -- so change
`AddDiscriminators` to call `MDLocation::get()` directly. Should be no
functionality change here.
llvm-svn: 234824
The only difference between the two is a `dyn_cast<>` to
`GlobalVariable`. If optimizations have left anything behind when a
global gets replaced, then it doesn't seem like the debug info is dead.
I can't seem to find an optimization that would leave behind a
non-`GlobalVariable` without nulling the reference entirely, so I
haven't added a testcase (but I'll be deleting `getGlobal()` in a future
commit).
llvm-svn: 234792
Use early-return style that's preferred in LLVM and updating the naming in places I touched with other changes in the last few days. Hopefully, NFC.
llvm-svn: 234785
We use dummy calls to adjust the liveness of values over statepoints in the midst of the insertion. If there are no values which need held live, there's no point in actually inserting the holder.
llvm-svn: 234779
Since we're restructuring the CFG, we also need to make sure to update the analsis passes. While I'm touching the code, I dedicided to restructure it a bit. The code involved here was very confusing. This change moves the normalization to essentially being a pre-pass before the main insertion work and updates a few comments to actually say what is happening and *why*.
The restructuring should be covered by existing tests. I couldn't easily see how to create a test for the invalidation bug. Suggestions welcome.
llvm-svn: 234769
This is related to the issues addressed in 234651. These assertions check the properties ensured by that change at the place of use. Note that a similiar property is checked in checkBasicSSA, but without the reachability constraint. Technically, the liveness would be correct to include unreachable values, but this would be problematic for actual relocation.
llvm-svn: 234766
The check in question is attempting to help find cases where we haven't relocated a pointer at a safepoint we should have. It does this by coercing the value to null at any safepoint which doesn't relocate it.
Unfortunately, this turns out to be rather expensive in terms of memory usage and time. The number of stores inserted can grow with O(number of values x number of statepoints). On at least one example I looked at, over half of peak memory usage was coming from this check.
With this change, the check is no longer enabled by default in Asserts builds. It is enabled for expensive asserts builds and has a command line option to enable it in both Asserts and non-Asserts builds.
llvm-svn: 234761
Clean up a predicate I added in r229731, fix the relevant comment and
add a test case. The earlier version is confusing to read and was also
buggy (probably not a coincidence) till Alexey fixed it in r233881.
llvm-svn: 234701
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
llvm-svn: 234679
Rewrite `DILocation::atSameLineAs()` as `MDLocation::canDiscriminate()`
with a doxygen comment explaining its purpose. I've added a few FIXMEs
where I think this check is too weak; fixing that is tracked by PR23199.
llvm-svn: 234674
When rewriting statepoints to make relocations explicit, we need to have a conservative but consistent notion of where a particular pointer is live at a particular site. The old code just used dominance, which is correct, but decidedly more conservative then it needed to be. This patch implements a simple dataflow algorithm that's run one per function (well, twice counting fixup after base pointer insertion). There's still lots of room to make this faster, but it's fast enough for all practical purposes today.
Differential Revision: http://reviews.llvm.org/D8674
llvm-svn: 234657
After submitting 234651, I noticed I hadn't responded to a review comment by mjacob. This patch addresses that comment and fixes a Release only build problem due to an unused variable.
llvm-svn: 234653
Two related small changes:
Various dominance based queries about liveness can get confused if we're talking about unreachable blocks. To avoid reasoning about such cases, just remove them before rewriting statepoints.
Remove single entry phis (likely left behind by LCSSA) to reduce the number of live values.
Both of these are motivated by http://reviews.llvm.org/D8674 which will be submitted shortly.
Differential Revision: http://reviews.llvm.org/D8675
llvm-svn: 234651
This patch adds limited support for inserting explicit relocations when there's a vector of pointers live over the statepoint. This doesn't handle the case where the vector contains a mix of base and non-base pointers; that's future work.
The current implementation just scalarizes the vector over the gc.statepoint before doing the explicit rewrite. An alternate approach would be to plumb the vector all the way though the backend lowering, but doing that appears challenging. In particular, the size of the indirect spill slot is currently assumed to be sizeof(pointer) throughout the backend.
In practice, this is enough to allow running the SLP and Loop vectorizers before RewriteStatepointsForGC.
Differential Revision: http://reviews.llvm.org/D8671
llvm-svn: 234647
Summary:
This change moves creating calls to `llvm.uadd.with.overflow` from
InstCombine to CodeGenPrep. Combining overflow check patterns into
calls to the said intrinsic in InstCombine inhibits optimization because
it introduces an intrinsic call that not all other transforms and
analyses understand.
Depends on D8888.
Reviewers: majnemer, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8889
llvm-svn: 234638
WinEH currently turns invokes into calls. Long term, we will reconsider
this, but for now, make sure we remap the operands and clone the
successors of the new terminator.
llvm-svn: 234608
CallSite roughly behaves as a common base CallInst and InvokeInst. Bring
the behavior closer to that model by making upcasts explicit. Downcasts
remain implicit and work as before.
Following dyn_cast as a mental model checking whether a Value *V isa
CallSite now looks like this:
if (auto CS = CallSite(V)) // think dyn_cast
instead of:
if (CallSite CS = V)
This is an extra token but I think it is slightly clearer. Making the
ctor explicit has the advantage of not accidentally creating nullptr
CallSites, e.g. when you pass a Value * to a function taking a CallSite
argument.
llvm-svn: 234601
The code uses a priority queue and a worklist, which share the same
visited set, but the visited set is only updated when inserting into
the priority queue. Instead, switch to using separate visited sets
for the priority queue and worklist.
llvm-svn: 234425
(Re-apply r234361 with a fix and a testcase for PR23157)
Both run-time pointer checking and the dependence analysis are capable
of dealing with uniform addresses. I.e. it's really just an orthogonal
property of the loop that the analysis computes.
Run-time pointer checking will only try to reason about SCEVAddRec
pointers or else gives up. If the uniform pointer turns out the be a
SCEVAddRec in an outer loop, the run-time checks generated will be
correct (start and end bounds would be equal).
In case of the dependence analysis, we work again with SCEVs. When
compared against a loop-dependent address of the same underlying object,
the difference of the two SCEVs won't be constant. This will result in
returning an Unknown dependence for the pair.
When compared against another uniform access, the difference would be
constant and we should return the right type of dependence
(forward/backward/etc).
The changes also adds support to query this property of the loop and
modify the vectorizer to use this.
Patch by Ashutosh Nema!
llvm-svn: 234424
Summary:
This patch adds an enum `OverflowCheckFlavor` and a function
`OptimizeOverflowCheck`. This will allow InstCombine to optimize
overflow checks without directly introducing an intermediate call to the
`llvm.$op.with.overflow` instrinsics.
This specific change is a refactoring and does not intend to change
behavior.
Reviewers: majnemer, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8888
llvm-svn: 234388
Both run-time pointer checking and the dependence analysis are capable
of dealing with uniform addresses. I.e. it's really just an orthogonal
property of the loop that the analysis computes.
Run-time pointer checking will only try to reason about SCEVAddRec
pointers or else gives up. If the uniform pointer turns out the be a
SCEVAddRec in an outer loop, the run-time checks generated will be
correct (start and end bounds would be equal).
In case of the dependence analysis, we work again with SCEVs. When
compared against a loop-dependent address of the same underlying object,
the difference of the two SCEVs won't be constant. This will result in
returning an Unknown dependence for the pair.
When compared against another uniform access, the difference would be
constant and we should return the right type of dependence
(forward/backward/etc).
The changes also adds support to query this property of the loop and
modify the vectorizer to use this.
Patch by Ashutosh Nema!
llvm-svn: 234361
Replace all uses of `DITypedArray<>` with `MDTupleTypedArrayWrapper<>`
and `MDTypeRefArray`. The APIs are completely different, but the
provided functionality is the same: treat an `MDTuple` as if it's an
array of a particular element type.
To simplify this patch a bit, I've temporarily typedef'ed
`DebugNodeArray` to `DIArray` and `MDTypeRefArray` to `DITypeArray`.
I've also temporarily conditionalized the accessors to check for null --
eventually these should be changed to asserts and the callers should
check for null themselves.
There's a tiny accompanying patch to clang.
llvm-svn: 234290
Summary:
Instead of making a local copy of `checkInterfaceFunction` for each
sanitizer, move the function in a common place.
Reviewers: kcc, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8775
llvm-svn: 234220
Remove `DIDescriptor::Verify()` and the `Verify()`s from subclasses.
They had already been gutted, and just did an `isa<>` check.
In a couple of cases I've temporarily dropped the check entirely, but
subsequent commits are going to disallow conversions to the
`DIDescriptor`s directly from `MDNode`, so the checks will come back in
another form soon enough.
llvm-svn: 234201
There's still lots of callers passing nullptr, of course - some because
they'll never be migrated (InstCombines for bitcasts - well they don't
make any sense when the pointer type is opaque anyway, for example) and
others that will need more engineering to pass Types around.
llvm-svn: 234126
InstCombine didn't realize that it needs to use DataLayout to determine
how wide pointers are. This lead to assertion failures.
This fixes PR23113.
llvm-svn: 234046
The plan here is to push the API changes out from the common components
(like Constant::getGetElementPtr and IRBuilder::CreateGEP related
functions) and just update callers to either pass the type if it's
obvious, or pass null.
Do this with LoadInst as well and anything else that comes up, then to
start porting specific uses to not pass null anymore - this may require
some refactoring in each case.
llvm-svn: 234042
This prevents us from running out of registers in the backend.
Introducing stack malloc calls prevents the backend from recognizing the
inline asm operands as stack objects. When the backend recognizes a
stack object, it doesn't need to materialize the address of the memory
in a physical register. Instead it generates a simple SP-based memory
operand. Introducing a stack malloc forces the backend to find a free
register for every memory operand. 32-bit x86 simply doesn't have enough
registers for this to succeed in most cases.
Reviewers: kcc, samsonov
Differential Revision: http://reviews.llvm.org/D8790
llvm-svn: 233979
Summary:
The old requirement on GEP candidates being in bounds is unnecessary.
For off-bound GEPs, we still have
&B[i * S] = B + (i * S) * e = B + (i * e) * S
Test Plan: slsr_offbound_gep in slsr-gep.ll
Reviewers: meheff
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8809
llvm-svn: 233949
Require the pointee type to be passed explicitly and assert that it is
correct. For now it's possible to pass nullptr here (and I've done so in
a few places in this patch) but eventually that will be disallowed once
all clients have been updated or removed. It'll be a long road to get
all the way there... but if you have the cahnce to update your callers
to pass the type explicitly without depending on a pointer's element
type, that would be a good thing to do soon and a necessary thing to do
eventually.
llvm-svn: 233938
We used to do this before refactorings around r225640.
Some clang users checked for _chk libcall availability using:
__has_builtin(__builtin___memcpy_chk)
When compiling with -fno-builtin, this is always true.
When passing -ffreestanding/-mkernel, which both imply -fno-builtin, we
end up with fortified libcalls, which isn't acceptable in a freestanding
environment which only provides their non-fortified counterparts.
Until we change clang and/or teach external users to check for availability
differently, disregard the "nobuiltin" attribute and TLI::has.
Workaround for PR23093.
llvm-svn: 233776
This pushes the use of PointerType::getElementType up into several
callers - I'll essentially just have to keep pushing that up the stack
until I can eliminate every call to it...
llvm-svn: 233604
This just didn't need to be here at all, but the assertion I tried to
add wasn't appropriate either - the circumstance isn't impossible, it's
just not important to deal with it here - the gep-rooted version of this
instcombine will handle this case, we don't need to duplicate it for the
case where the gep happens to be used in a bitcast.
llvm-svn: 233404
We make many redundant calls to isInterestingAlloca in the AddressSanitzier
pass. This is especially inefficient for allocas that have many uses. Let's
cache the results to speed up compilation.
The compile time improvements depend on the input. I did not see much
difference on benchmarks; however, I have a test case where compile time
goes from minutes to under a second.
llvm-svn: 233397
This re-adds float2int to the tree, after fixing PR23038. It turns
out the argument to APSInt() is true-if-unsigned, rather than
true-if-signed :(. Added testcase and explanatory comment.
llvm-svn: 233370
The assertion here was more expensive then it needed to be. We're only inserting allocas in the entry block, so we only need to consider ones in the entry block.
llvm-svn: 233362
Summary:
This patch enhances SLSR to handle another candidate form &B[i * S]. If
we found two candidates
S1: X = &B[i * S]
S2: Y = &B[i' * S]
and S1 dominates S2, we can replace S2 with
Y = &X[(i' - i) * S]
Test Plan:
slsr-gep.ll
X86/no-slsr.ll: verify that we do not run SLSR on GEPs that already fit into
an addressing mode
Reviewers: eliben, atrick, meheff, hfinkel
Reviewed By: hfinkel
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D7459
llvm-svn: 233286
The changes to InstCombine (& SCEV) do seem a bit silly - it doesn't make
anything obviously better to have the caller access the pointers element
type (the thing I'm trying to remove) than the GEP itself, but it's a
helpful migration step. This will allow me to more obviously lock down
GEP (& Load, etc) API usage, then fix all the code that accesses pointer
element types except the places that need to be removed (most of the
InstCombines) anyway - at which point I'll need to just remove all that
code because it won't be meaningful anymore (there will be no pointer
types, so no bitcasts to combine)
SCEV looks like it'll need some restructuring - we'll have to do a bit
more work for GEP canonicalization, since it'll depend on how it's used
if we can even manage to canonicalize it to a non-ugly GEP. I guess we
can do some fun stuff like voting (do 2 out of 3 load from the GEP with
a certain type that gives a pretty GEP? Does every typed use of the GEP
use either a specific type or a generic type (i8*, etc)?)
llvm-svn: 233131
The changes to InstCombine do seem a bit silly - it doesn't make
anything obviously better to have the caller access the pointers element
type (the thing I'm trying to remove) than the GEP itself, but it's a
helpful migration step. This will allow me to more obviously lock down
GEP (& Load, etc) API usage, then fix all the code that accesses pointer
element types except the places that need to be removed (most of the
InstCombines) anyway - at which point I'll need to just remove all that
code because it won't be meaningful anymore (there will be no pointer
types, so no bitcasts to combine)
llvm-svn: 233126
This patch tries to merge duplicate landing pads when they branch to a common shared target.
Given IR that looks like this:
lpad1:
%exn = landingpad {i8*, i32} personality i32 (...)* @__gxx_personality_v0
cleanup
br label %shared_resume
lpad2:
%exn2 = landingpad {i8*, i32} personality i32 (...)* @__gxx_personality_v0
cleanup
br label %shared_resume
shared_resume:
call void @fn()
ret void
}
We can rewrite the users of both landing pad blocks to use one of them. This will generally allow the shared_resume block to be merged with the common landing pad as well.
Without this change, tail duplication would likely kick in - creating N (2 in this case) copies of the shared_resume basic block.
Differential Revision: http://reviews.llvm.org/D8297
llvm-svn: 233125
Assert that this doesn't fire - I'll remove all of this later, but just
leaving it in for a while in case this is firing & we just don't have
test coverage.
llvm-svn: 233116
This is the IR optimizer follow-on patch for D8563: the x86 backend patch
that converts this kind of shuffle back into a vperm2.
This is also a continuation of the transform that started in D8486.
In that patch, Andrea suggested that we could convert vperm2 intrinsics that
use zero masks into a single shuffle.
This is an implementation of that suggestion.
Differential Revision: http://reviews.llvm.org/D8567
llvm-svn: 233110
This caused PR23008, compiles failing with: "Use still stuck around after Def is
destroyed: %.sroa.speculated"
Also reverting follow-up r233064.
llvm-svn: 233105
IRCE requires the induction variables it handles to not sign-overflow.
The current scheme of checking if sext({X,+,S}) == {sext(X),+,sext(S)}
fails when SCEV simplifies sext(X) too. After this change we //also//
check no-signed-wrap by looking at the flags set on the SCEVAddRecExpr.
llvm-svn: 233102
It is possible to have code that converts from integer to float, performs operations then converts back, and the result is provably the same as if integers were used.
This can come from different sources, but the most obvious is a helper function that uses floats but the arguments given at an inlined callsites are integers.
This pass considers all integers requiring a bitwidth less than or equal to the bitwidth of the mantissa of a floating point type (23 for floats, 52 for doubles) as exactly representable in floating point.
To reduce the risk of harming efficient code, the pass only attempts to perform complete removal of inttofp/fptoint operations, not just move them around.
llvm-svn: 233062
strchr("123!", C) != nullptr is a common pattern to check if C is one
of 1, 2, 3 or !. If the largest element of the string is smaller than
the target's register size we can easily create a bitfield and just
do a simple test for set membership.
int foo(char C) { return strchr("123!", C) != nullptr; } now becomes
cmpl $64, %edi ## range check
sbbb %al, %al
movabsq $0xE000200000001, %rcx
btq %rdi, %rcx ## bit test
sbbb %cl, %cl
andb %al, %cl ## and the two conditions
andb $1, %cl
movzbl %cl, %eax ## returning an int
ret
(imho the backend should expand this into a series of branches, but
that's a different story)
The code is currently limited to bit fields that fit in a register, so
usually 64 or 32 bits. Sadly, this misses anything using alpha chars
or {}. This could be fixed by just emitting a i128 bit field, but that
can generate really ugly code so we have to find a better way. To some
degree this is also recreating switch lowering logic, but we can't
simply emit a switch instruction and thus change the CFG within
instcombine.
llvm-svn: 232902
vperm2* intrinsics are just shuffles.
In a few special cases, they're not even shuffles.
Optimizing intrinsics in InstCombine is better than
handling this in the front-end for at least two reasons:
1. Optimizing custom-written SSE intrinsic code at -O0 makes vector coders
really angry (and so I have regrets about some patches from last week).
2. Doing mask conversion logic in header files is hard to write and
subsequently read.
There are a couple of TODOs in this patch to complete this optimization.
Differential Revision: http://reviews.llvm.org/D8486
llvm-svn: 232852
Don't use `DebugLoc` accessors if we're pointing at null, which will be
a problem after a WIP patch to make the `DIDescriptor` accessors more
strict. Caught by Frontend/profile-sample-use-loc-tracking.c (in
clang).
llvm-svn: 232792
Remove `DebugInfoVerifierLegacyPass` and the `-verify-di` pass.
Instead, call into the `DebugInfoVerifier` from inside
`VerifierLegacyPass::finalizeModule()`. This better matches the logic
in `verifyModule()` (used by the new PassManager), avoids requiring two
separate passes to verify the IR, and makes the API for "add a pass to
verify the IR" simple.
Note: the `-verify-debug-info` flag still works (for now, at least;
eventually it might make sense to just remove it).
llvm-svn: 232772
Each use of the byte array uses a different alias. This makes the
backend less likely to reuse previously computed byte array addresses,
improving the security of the CFI mechanism based on this pass.
Differential Revision: http://reviews.llvm.org/D8455
llvm-svn: 232770
This change also introduces a link-time optimization level of 1. This
optimization level runs only the globaldce pass as well as cleanup passes for
passes that run at -O0, specifically simplifycfg which cleans up lowerbitsets.
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150316/266951.html
llvm-svn: 232769
`StripDebug` was only used by tools/opt/opt.cpp in
`AddStandardLinkPasses()`, but opt.cpp adds the same pass based on its
command-line flag before it calls `AddStandardLinkPasses()`. Stripping
debug info twice isn't very useful.
llvm-svn: 232765
When we encounter a global with a comdat, rather than iterating over
every global in the module to find globals in the same comdat, store the
members in a multimap. This effectively lowers the complexity to O(N log N),
improving performance significantly for large modules such as might be
encountered during LTO.
It looks like we used to do something like this until r219191.
No functional change.
Differential Revision: http://reviews.llvm.org/D8431
llvm-svn: 232743
Summary:
This change splits `makeICmpRegion` into `makeAllowedICmpRegion` and
`makeSatisfyingICmpRegion` with slightly different contracts. The first
one is useful for determining what values some expression //may// take,
given that a certain `icmp` evaluates to true. The second one is useful
for determining what values are guaranteed to //satisfy// a given
`icmp`.
Reviewers: nlewycky
Reviewed By: nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8345
llvm-svn: 232575
The experiments can be used to evaluate potential optimizations that remove
instrumentation (assess false negatives). Instead of completely removing
some instrumentation, you set Exp to a non-zero value (mask of optimization
experiments that want to remove instrumentation of this instruction).
If Exp is non-zero, this pass will emit special calls into runtime
(e.g. __asan_report_exp_load1 instead of __asan_report_load1). These calls
make runtime terminate the program in a special way (with a different
exit status). Then you run the new compiler on a buggy corpus, collect
the special terminations (ideally, you don't see them at all -- no false
negatives) and make the decision on the optimization.
The exact reaction to experiments in runtime is not implemented in this patch.
It will be defined and implemented in a subsequent patch.
http://reviews.llvm.org/D8198
llvm-svn: 232502
Allow unresolved nodes through the `MapMetadata()` if
`RF_NoModuleLevelChanges`, since there's no remapping to do anyway.
This fixes PR22929. I'll add a clang test as a follow-up.
llvm-svn: 232449
This change to IRCE gets it to recognize "half" range checks. Half
range checks are range checks that only either check if the index is
`slt` some positive integer ("length") or if the index is `sge` `0`.
The range solver does not try to be clever / aggressive about solving
half-range checks -- it transforms "I < L" to "0 <= I < L" and "0 <= I"
to "0 <= I < INT_SMAX". This is safe, but not always optimal.
llvm-svn: 232444
By default we want our gcov emission to stay 4.2 compatible, which
means we need to continue emit the exit block last by default. We add
an option to emit it before the body for users that need it.
llvm-svn: 232438
The problem here is the infamous one direction known safe. I was
hesitant to turn it off before b/c of the potential for regressions
without an actual bug from users hitting the problem. This is that bug ;
).
The main performance impact of having known safe in both directions is
that often times it is very difficult to find two releases without a use
in-between them since we are so conservative with determining potential
uses. The one direction known safe gets around that problem by taking
advantage of many situations where we have two retains in a row,
allowing us to avoid that problem. That being said, the one direction
known safe is unsafe. Consider the following situation:
retain(x)
retain(x)
call(x)
call(x)
release(x)
Then we know the following about the reference count of x:
// rc(x) == N (for some N).
retain(x)
// rc(x) == N+1
retain(x)
// rc(x) == N+2
call A(x)
call B(x)
// rc(x) >= 1 (since we can not release a deallocated pointer).
release(x)
// rc(x) >= 0
That is all the information that we can know statically. That means that
we know that A(x), B(x) together can release (x) at most N+1 times. Lets
say that we remove the inner retain, release pair.
// rc(x) == N (for some N).
retain(x)
// rc(x) == N+1
call A(x)
call B(x)
// rc(x) >= 1
release(x)
// rc(x) >= 0
We knew before that A(x), B(x) could release x up to N+1 times meaning
that rc(x) may be zero at the release(x). That is not safe. On the other
hand, consider the following situation where we have a must use of
release(x) that x must be kept alive for after the release(x)**. Then we
know that:
// rc(x) == N (for some N).
retain(x)
// rc(x) == N+1
retain(x)
// rc(x) == N+2
call A(x)
call B(x)
// rc(x) >= 2 (since we know that we are going to release x and that that release can not be the last use of x).
release(x)
// rc(x) >= 1 (since we can not deallocate the pointer since we have a must use after x).
…
// rc(x) >= 1
use(x)
Thus we know that statically the calls to A(x), B(x) can together only
release rc(x) N times. Thus if we remove the inner retain, release pair:
// rc(x) == N (for some N).
retain(x)
// rc(x) == N+1
call A(x)
call B(x)
// rc(x) >= 1
…
// rc(x) >= 1
use(x)
We are still safe unless in the final … there are unbalanced retains,
releases which would have caused the program to blow up anyways even
before optimization occurred. The simplest form of must use is an
additional release that has not been paired up with any retain (if we
had paired the release with a retain and removed it we would not have
the additional use). This fits nicely into the ARC framework since
basically what you do is say that given any nested releases regardless
of what is in between, the inner release is known safe. This enables us to get
back the lost performance.
<rdar://problem/19023795>
llvm-svn: 232351
Summary: This is a first step toward getting proper support for aggregate loads and stores.
Test Plan: Added unittests
Reviewers: reames, chandlerc
Reviewed By: chandlerc
Subscribers: majnemer, joker.eph, chandlerc, llvm-commits
Differential Revision: http://reviews.llvm.org/D7780
Patch by Amaury Sechet
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 232284
This involved threading the type-to-gep through a data structure, since
the code was relying on the pointer type to carry this information. I
imagine there will be a lot of this work across the project... slow
work chasing each use case, but the assertions will help keep me honest.
llvm-svn: 232277
Adding nullptr to all the IRBuilder stuff because it's the first thing
that fails to build when testing without the back-compat functions, so
I'll keep having to re-add these locally for each chunk of migration I
do. Might as well check them in to save me the churn. Eventually I'll
have to migrate these too, but I'm going breadth-first.
llvm-svn: 232270
I'm just going to migrate these in a pretty ad-hoc & incremental way -
providing the backwards compatible API for now, then locally removing
it, fixing a few callers, adding it back in and commiting those callers.
Rinse, repeat.
The assertions should ensure that if I get this wrong we'll find out
about it and not just have one giant patch to revert, recommit, revert,
recommit, etc.
llvm-svn: 232240
The linker on that platform may re-order symbols or strip dead symbols, which
will break bit set checks. Avoid this by hiding the symbols from the linker.
llvm-svn: 232235
Sanjoy Das