Summary:
With D81784, lld has started debug info resolving relocations to
garbage-collected symbols as -1 (instead of relocation addend). For an
unaware consumer this generated sequences which seemingly wrap the
address space -- their first entry was 0xfffff, but all other entries
were low numbers.
Lldb stores line sequences concatenated into one large vector, sorted by
the first entry, and searched with std::lower_bound. This resulted in
the low-value entries being placed at the end of the vector, which
utterly confused the lower_bound algorithm, and caused it to not find a
match. (Previously, these sequences would be at the start of the vector,
and normally would contain addresses that are far smaller than any real
address we want to look up, so std::lower_bound was fine.)
This patch makes lldb ignore these kinds of sequences completely. It
does that by changing the construction algorithm from iterating over the
rows (as parsed by llvm), to iterating over the sequences. This is
important because the llvm parsed performs validity checks when
constructing the sequence array, whereas the row array contains raw
data.
Reviewers: JDevlieghere, MaskRay
Differential Revision: https://reviews.llvm.org/D83957
MBBs are not allowed to have non-terminator instructions after the first
terminator. Currently in some cases (see the modified test),
EmitSchedule can add DBG_VALUEs after the last terminator, for example
when referring a debug value that gets folded into a TCRETURN
instruction on ARM.
This patch updates EmitSchedule to move inserted DBG_VALUEs just before
the first terminator. I am not sure if there are terminators produce
values that can in turn be used by a DBG_VALUE. In that case, moving the
DBG_VALUE might result in referencing an undefined register. But in any
case, it seems like currently there is no way to insert a proper DBG_VALUEs
for such registers anyways.
Alternatively it might make sense to just remove those extra DBG_VALUES.
I am not too familiar with the details of debug info in the backend and
would appreciate any suggestions on how to address the issue in the best
possible way.
Reviewers: vsk, aprantl, jpaquette, efriedma, paquette
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83561
This adds option -tsan-compound-read-before-write to emit different
instrumentation for the write if the read before that write is omitted
from instrumentation. The default TSan runtime currently does not
support the different instrumentation, and the option is disabled by
default.
Alternative runtimes, such as the Kernel Concurrency Sanitizer (KCSAN)
can make use of the feature. Indeed, the initial motivation is for use
in KCSAN as it was determined that due to the Linux kernel having a
large number of unaddressed data races, it makes sense to improve
performance and reporting by distinguishing compounded operations. E.g.
the compounded instrumentation is typically emitted for compound
operations such as ++, +=, |=, etc. By emitting different reports, such
data races can easily be noticed, and also automatically bucketed
differently by CI systems.
Reviewed By: dvyukov, glider
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83867
Summary:
Currently the frame recognizers are stored in a global list (the list in the
StackFrameRecognizersManagerImpl singleton to be precise). All commands and
plugins that modify the list are just modifying that global list of recognizers
which is shared by all Target and Debugger instances.
This is clearly against the idea of LLDB being usable as a library and it also
leads to some very obscure errors as now multiple tests are sharing the used
frame recognizers. For example D83400 is currently failing as it reorders some
test_ functions which permanently changes the frame recognizers of all
debuggers/targets. As all frame recognizers are also initialized in a 'once'
guard, it's also impossible to every restore back the original frame recognizers
once they are deleted in a process.
This patch just moves the frame recognizers into the current target. This seems
the way everyone assumes the system works as for example the assert frame
recognizers is using the current target to find the function/so-name to look for
(which only works if the recognizers are stored in the target).
Reviewers: jingham, mib
Reviewed By: jingham, mib
Subscribers: MrHate, JDevlieghere
Differential Revision: https://reviews.llvm.org/D83757
```
define i32 @test(i1 %cond) {
entry:
br i1 %cond, label %exit, label %exit
exit:
%result = select i1 %cond, i32 123, i32 456
ret i32 %result
}
```
In this test, after applying transformation of replacing select with Phis,
the result will be:
```
define i32 @test(i1 %cond) {
entry:
br i1 %cond, label %exit, label %exit
exit:
%result = i32 phi [123, %exit], [123, %exit]
ret i32 %result
}
```
That is, select is transformed into an invalid Phi, which will then be
reduced to 123 and the second value will be lost. But it is worth
noting that this problem will arise only if select is in the InstCombine
worklist will be before the branch. Otherwise, InstCombine will replace
the branch condition with false and transformation will not be applied.
The fix is to check the target labels in the branch condition for equality.
Patch By: Kirill Polushin
Differential Revision: https://reviews.llvm.org/D84003
Reviewed By: mkazantsev
For now, DIEExpr is used only in two places:
1) in the debug info library unit test suite to emit
a DW_AT_str_offsets_base attribute with the DW_FORM_sec_offset
form, see dwarfgen::DIE::addStrOffsetsBaseAttribute();
2) in DwarfCompileUnit::addLocationAttribute() to generate the location
attribute for a TLS variable.
The later case used an incorrect DWARF form of DW_FORM_udata, which
implies storing an uleb128 value, not a 4/8 byte constant. The generated
result was as expected because DIEExpr::SizeOf() did not handle the used
form, but returned the size of the code pointer by default.
The patch fixes the issue by using more appropriate DWARF forms for
the problematic case and making DIEExpr::SizeOf() more straightforward.
Differential Revision: https://reviews.llvm.org/D83958
Summary:
When we try to find the executable module for our target we don't check
if we already have an executable module set. This causes that when debugging
a program that dlopens another executable, LLDB will take that other executable
as the new executable of the target (which causes that future launches of the
target will launch the dlopen'd executable instead of the original executable).
This just adds a check that we only set the executable when we haven't already
found one.
Fixes rdar://63443099
Reviewers: jasonmolenda, jingham, teemperor
Reviewed By: jasonmolenda, teemperor
Subscribers: jingham, JDevlieghere
Differential Revision: https://reviews.llvm.org/D80724
I meant to do this in D83913, but missed it while updating the
feature list.
Interestingly I think this is disabling the postRA scheduler. But
it does match our default 64-bit behavior.
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D83996
We use a SmallString<512> and attempted to reserve enough space
for CPU plus Features, but that doesn't account for all the things
that get added to the string.
Reorder the string so the shortest things go first which shouldn't
exceed the small size. Finally add the feature string at the end
which might be long. This should ensure at most one heap allocation
without needing to use reserve.
I don't know if this matters much in practice, but I was looking
into something else that will require more code here and noticed
the odd reserve call.
Make explicit that freeze does not touch paddings of an aggregate.
(Relevant comment: https://reviews.llvm.org/D83752#2152550)
This implies that `v = freeze(load p); store v, q` may still leave undef bits
or poison in memory if `v` is an aggregate, but it still happens for
non-byte integers such as i1.
Differential Revision: https://reviews.llvm.org/D83927
When SCC is dead, but VCC is required then replace s_and / s_andn2
with s_mov into VCC when mask value is 0 or -1.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D83850
This causes binaries linked with this runtime to crash on startup if
dlsym uses any of the intercepted functions. (For example, that happens
when using tcmalloc as the allocator: dlsym attempts to allocate memory
with malloc, and tcmalloc uses strncmp within its implementation.)
Also revert dependent commit "[libFuzzer] Disable implicit builtin knowledge about memcmp-like functions when -fsanitize=fuzzer-no-link is given."
This reverts commit f78d9fceea and 12d1124c49.
Similar to the reason behind moving __llvm_profile_filename into a
separate file[1]. When users try to use Full LTO with BFD linker to
generate IR level PGO profile, the __llvm_profile_raw_version variable,
which is used for marking instrumentation level, generated by frontend
would somehow conflict with the weak symbol provided by profiling
runtime.
In most of the cases, BFD linkers will pick profiling runtime's weak symbol
as the real definition and thus generate the incorrect instrumentation
level metadata in the final executables.
Moving __llvm_profile_raw_version into a separate file would make
linkers not seeing the weak symbol in the archive unless the frontend
doesn't generate one.
[1] https://reviews.llvm.org/D34797
Differential Revision: https://reviews.llvm.org/D83967
Summary: This patch disables implicit builtin knowledge about memcmp-like functions when compiling the program for fuzzing, i.e., when -fsanitize=fuzzer(-no-link) is given. This allows libFuzzer to always intercept memcmp-like functions as it effectively disables optimizing calls to such functions into different forms. This is done by adding a set of flags (-fno-builtin-memcmp and others) in the clang driver. Individual -fno-builtin-* flags previously used in several libFuzzer tests are now removed, as it is now done automatically in the clang driver.
Reviewers: morehouse, hctim
Subscribers: cfe-commits, #sanitizers
Tags: #clang, #sanitizers
Differential Revision: https://reviews.llvm.org/D83987
This test is hitting https://bugs.python.org/issue22393 which results in
the lit multiprocessing pool deadlocking and the reproducer job timing
out on GreenDragon.
This patch adds the instruction definitions and MC tests for the 128-bit Binary
Integer Operation instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D83516
long double is a 64-bit double-precision type on:
- MSVC (32- and 64-bit x86)
- Android (32-bit x86)
long double is a 128-bit quad-precision type on x86_64 Android.
The assembly variants of the 80-bit builtins are correct, but some of
the builtins are implemented in C and require that long double be the
80-bit type passed via an x87 register.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D82153
Fix failure in Android bots from refactoring in
5d2be1a188 (https://crbug.com/1106482).
We need to make the UnmapFromTo available outside sanitizer_common for
calls from hwasan and asan linux handling. While here, remove
declaration of GetHighMemEnd which is no longer in sanitizer_common.
TargetProcessControl is a new API for communicating with JIT target processes.
It supports memory allocation and access, and inspection of some process
properties, e.g. the target proces triple and page size.
Centralizing these APIs allows utilities written against TargetProcessControl
to remain independent of the communication procotol with the target process
(which may be direct memory access/allocation for in-process JITing, or may
involve some form of IPC or RPC).
An initial set of TargetProcessControl-based utilities for lazy compilation is
provided by the TPCIndirectionUtils class.
An initial implementation of TargetProcessControl for in-process JITing
is provided by the SelfTargetProcessControl class.
An example program showing how the APIs can be used is provided in
llvm/examples/OrcV2Examples/LLJITWithTargetProcessControl.
SimplifyCFG was incorrectly reporting to the pass manager that it had not made
changes after folding away a PHI. This is detected in the EXPENSIVE_CHECKS
build when the function's hash changes.
Differential Revision: https://reviews.llvm.org/D83985
Pavel Labath