This is needed to support fortran assumed rank arrays which
have runtime rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF TAG
DW_TAG_generic_subrange is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89218
Fix an out-of-bounds shift in emitLegacyZExt by using a slightly more
complicated dwarf expression to create the zext mask.
This addresses a UBSan diagnostic seen when compiling compiler-rt
(llvm.org/PR47927).
rdar://70307714
Differential Revision: https://reviews.llvm.org/D89838
This patch enables emitting DWARF `DW_OP_implicit_value` opcode when
tuning debug information for LLDB (`-debugger-tune=lldb`).
This will also propagate to Darwin platforms, since they use LLDB tuning
as a default.
rdar://67406059
Differential Revision: https://reviews.llvm.org/D90001
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Testing reveals that lldb and gdb have some problems with supporting
DW_OP_convert - gdb with Split DWARF tries to resolve the CU-relative
DIE offset relative to the skeleton DIE. lldb tries to treat the offset
as absolute, which judging by the llvm-dsymutil support for
DW_OP_convert, I guess works OK in MachO? (though probably llvm-dsymutil
is producing invalid DWARF by resolving the relative reference to an
absolute one?).
Specifically this disables DW_OP_convert usage in DWARFv5 if:
* Tuning for GDB and using Split DWARF
* Tuning for LLDB and not targeting MachO
LLVM rejects DWARF operator DW_OP_over. This DWARF operator is needed
for Flang to support assumed rank array.
Summary:
Currently LLVM rejects DWARF operator DW_OP_over. Below error is
produced when llvm finds this operator.
[..]
invalid expression
!DIExpression(151, 20, 16, 48, 30, 35, 80, 34, 6)
warning: ignoring invalid debug info in over.ll
[..]
There were some parts missing in support of this operator, which are
now completed.
Testing
-added a unit testcase
-check-debuginfo
-check-llvm
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89208
When given the -experimental-debug-variable-locations option (via -Xclang
or to llc), have SelectionDAG generate DBG_INSTR_REF instructions instead
of DBG_VALUE. For now, this only happens in a limited circumstance: when
the value referred to is not a PHI and is defined in the current block.
Other situations introduce interesting problems, addresed in later patches.
Practically, this patch hooks into InstrEmitter and if it can find a
defining instruction for a value, gives it an instruction number, and
points the DBG_INSTR_REF at that <instr, operand> pair.
Differential Revision: https://reviews.llvm.org/D85747
This patch adds support for DWARF attribute DW_AT_rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF attribute
DW_AT_rank is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89141
It's not possible to do this in complete generality - a CU using a
sec_offset DW_AT_ranges has no way of knowing where its rnglists
contribution starts, so should not attempt to parse any full rnglist
table/header to do so. And even using FORM_rnglistx there's no need to
parse the header - the offset can be computed using the CU's DWARF
format (32 or 64) to compute offset entry sizes, and then the list
parsed at that offset without ever trying to find a rnglist contribution
header immediately prior to the rnglists_base.
This allows LiveDebugValues to insert the proper DBG_VALUEs in live
out blocks if a spill is inserted before the use of a
register. Previously, this would see the register use as the last
DBG_VALUE, even though the stack slot should be treated as the live
out value.
This avoids an lldb test regression when D52010 is re-applied.
Until then, this one line fix removes the assert fail with basic block sections
with debug info. Bug tracking this: #47549
This fix does not generate loc list or DW_AT_const_value if the argument is
mentioned in a different section than the start of the function.
Temporarily fixes bugzilla : https://bugs.llvm.org/show_bug.cgi?id=47549
Differential Revision: https://reviews.llvm.org/D87787
Flag DIEs that have DW_CHILDREN_yes set in their abbreviation but don't
actually have any children.
rdar://59809554
Differential revision: https://reviews.llvm.org/D88048
This rewrites big parts of the fast register allocator. The basic
strategy of doing block-local allocation hasn't changed but I tweaked
several details:
Track register state on register units instead of physical
registers. This simplifies and speeds up handling of register aliases.
Process basic blocks in reverse order: Definitions are known to end
register livetimes when walking backwards (contrary when walking
forward then uses may or may not be a kill so we need heuristics).
Check register mask operands (calls) instead of conservatively
assuming everything is clobbered. Enhance heuristics to detect
killing uses: In case of a small number of defs/uses check if they are
all in the same basic block and if so the last one is a killing use.
Enhance heuristic for copy-coalescing through hinting: We check the
first k defs of a register for COPYs rather than relying on there just
being a single definition. When testing this on the full llvm
test-suite including SPEC externals I measured:
average 5.1% reduction in code size for X86, 4.9% reduction in code on
aarch64. (ranging between 0% and 20% depending on the test) 0.5%
faster compiletime (some analysis suggests the pass is slightly slower
than before, but we more than make up for it because later passes are
faster with the reduced instruction count)
Also adds a few testcases that were broken without this patch, in
particular bug 47278.
Patch mostly by Matthias Braun
This is needed to support assumed size array of fortran which can have missing upperBound/count
, contrary to current DISubrange support.
Example:
subroutine sub (array1, array2)
integer :: array1 (*)
integer :: array2 (4:9, 10:*)
array1(7:8) = 9
array2(5, 10) = 10
end subroutine
Now the validation check is relaxed for fortran.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D87500
This seems to have caused incorrect register allocation in some cases,
breaking tests in the Zig standard library (PR47278).
As discussed on the bug, revert back to green for now.
> Record internal state based on register units. This is often more
> efficient as there are typically fewer register units to update
> compared to iterating over all the aliases of a register.
>
> Original patch by Matthias Braun, but I've been rebasing and fixing it
> for almost 2 years and fixed a few bugs causing intermediate failures
> to make this patch independent of the changes in
> https://reviews.llvm.org/D52010.
This reverts commit 66251f7e1d, and
follow-ups 931a68f26b
and 0671a4c508. It also adjust some
test expectations.
The patch fixes emitting flags and the debug_line_offset field in
the header, as well as the reference to the macro string for
a pre-standard GNU .debug_macro extension.
Differential Revision: https://reviews.llvm.org/D87024
The patch fixes emitting the unit length field in the header of
the table and offsets to the entry pool. Note that while the patch
changes the common method to emit offsets, in fact, nothing is changed
for Apple accelerator tables, because we do not yet support DWARF64 for
those targets.
Differential Revision: https://reviews.llvm.org/D87023
The patch fixes emitting the header of the table. The content is
independent of the DWARF format.
Differential Revision: https://reviews.llvm.org/D87022
The transition is done by using methods of AsmPrinter which
automatically emit values in compliance with the selected DWARF format.
Differential Revision: https://reviews.llvm.org/D87013
The patch fixes calculating the size of the table and emitting
the fields which depend on the DWARF format by using methods that
choose appropriate sizes automatically.
Differential Revision: https://reviews.llvm.org/D87012
The patch fixes emitting the offset to the type DIE. All other fields
are already fixed in previous patches.
Differential Revision: https://reviews.llvm.org/D87021
These two fixes are better to go together because llvm-dwarfdump is
unable to dump a table when another one is malformed.
Differential Revision: https://reviews.llvm.org/D87018
The patch uses a common method to determine the appropriate form for
the value of the attribute.
Differential Revision: https://reviews.llvm.org/D87016
The patch also adds a method to choose an appropriate DWARF form
to represent section offsets according to the version and the format
of producing debug info.
Differential Revision: https://reviews.llvm.org/D87014
The patch adds a switch to enable emitting debug info in the 64-bit
DWARF format. Most emitter for sections will be updated in the subsequent
patches, whereas for .debug_line and .debug_frame the emitters are in
the MC library, which is already updated.
For now, the switch is enabled only for 64-bit ELF targets.
Differential Revision: https://reviews.llvm.org/D87011
As stated in section 6.1.1.2, DWARFv5, p. 142,
| The last entry for each name is followed by a zero byte that
| terminates the list. There may be gaps between the lists.
The patch changes emitting a 4-byte zero value to a 1-byte one, which
effectively removes the gap between entry lists, and thus saves
approximately 3 bytes per name; the calculation is not exact because
the total size of the table is aligned to 4.
Differential Revision: https://reviews.llvm.org/D86927
Almost NFC (see end).
The backwards scan in validThroughout significantly contributed to compile time
for a pathological case, causing the 'X86 Assembly Printer' pass to account for
roughly 70% of the run time. This patch guards the loop against running
unnecessarily, bringing the pass contribution down to 4%.
Almost NFC: There is a hack in validThroughout which promotes single constant
value DBG_VALUEs in the prologue to be live throughout the function. We're more
likely to hit this code path with this patch applied. Similarly to the parent
patches there is a small coverage change reported in the order of 10s of bytes.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86153
With the changes introduced in D86151 we can now check for single locations
which span multiple blocks for inlined scopes and blocks.
D86151 introduced the InstructionOrdering parameter, replacing a scan through
MBB instructions. The functionality to compare instruction positions across
blocks was add there, and this patch just removes the exit checks that were
previously (but no longer) required.
CTMark shows a geomean binary size reduction of 2.2% for RelWithDebInfo builds.
llvm-locstats (using D85636) shows a very small variable location coverage
change in 5 of 10 binaries, but just like in D86151 it is only in the order of
10s of bytes.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D86152
With this patch we're now accounting for two more cases which should be
considered 'valid throughout': First, where RangeEnd is ScopeEnd. Second, where
RangeEnd comes before ScopeEnd when including meta instructions, but are both
preceded by the same non-meta instruction.
CTMark shows a geomean binary size reduction of 1.5% for RelWithDebInfo builds.
`llvm-locstats` (using D85636) shows a very small variable location coverage
change in 2 of 10 binaries, but it is in the order of 10s of bytes which lines
up with my expectations.
I've added a test which checks both of these new cases. The first check in the
test isn't strictly necessary for this patch. But I'm not sure that it is
explicitly tested anywhere else, and is useful for the final patch in the
series.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86151
Fangrui Song