to be applied to class or protocols. This will direct IRGen
for Objective-C metadata to use the new name in various places
where class and protocol names are needed.
rdar:// 17631257
llvm-svn: 213167
ensure that querying the first declaration for its most recent declaration
checks for redeclarations from the imported module.
This works as follows:
* The 'most recent' pointer on a canonical declaration grows a pointer to the
external AST source and a generation number (space- and time-optimized for
the case where there is no external source).
* Each time the 'most recent' pointer is queried, if it has an external source,
we check whether it's up to date, and update it if not.
* The ancillary data stored on the canonical declaration is allocated lazily
to avoid filling it in for declarations that end up being non-canonical.
We'll still perform a redundant (ASTContext) allocation if someone asks for
the most recent declaration from a decl before setPreviousDecl is called,
but such cases are probably all bugs, and are now easy to find.
Some finessing is still in order here -- in particular, we use a very general
mechanism for handling the DefinitionData pointer on CXXRecordData, and a more
targeted approach would be more compact.
Also, the MayHaveOutOfDateDef mechanism should now be expunged, since it was
addressing only a corner of the full problem space here. That's not covered
by this patch.
Early performance benchmarks show that this makes no measurable difference to
Clang performance without modules enabled (and fixes a major correctness issue
with modules enabled). I'll revert if a full performance comparison shows any
problems.
llvm-svn: 209046
Drive-by fixing some incorrect types where a for loop would be improperly using ObjCInterfaceDecl::protocol_iterator. No functional changes in these cases.
llvm-svn: 203842
A return type is the declared or deduced part of the function type specified in
the declaration.
A result type is the (potentially adjusted) type of the value of an expression
that calls the function.
Rule of thumb:
* Declarations have return types and parameters.
* Expressions have result types and arguments.
llvm-svn: 200082
Fix a perennial source of confusion in the clang type system: Declarations and
function prototypes have parameters to which arguments are supplied, so calling
these 'arguments' was a stretch even in C mode, let alone C++ where default
arguments, templates and overloading make the distinction important to get
right.
Readability win across the board, especially in the casting, ADL and
overloading implementations which make a lot more sense at a glance now.
Will keep an eye on the builders and update dependent projects shortly.
No functional change.
llvm-svn: 199686
Additionally, remove the optional nature of the spelling list index when creating attributes. This is supported by table generating a Spelling enumeration when the spellings for an attribute are distinct enough to warrant it.
llvm-svn: 199378
- Remove the additions to ObjCMethodDecl & ObjCIVarDecl that were getting de/serialized and consolidate
all functionality for the checking for this warning in Sema::DiagnoseUnusedBackingIvarInAccessor
- Don't check immediately after the method body is finished, check when the @implementation is finished.
This is so we can see if the ivar was referenced by any other method, even if the method was defined after the accessor.
- Don't silence the warning if any method is called from the accessor silence it if the accessor delegates to another method via self.
rdar://15727325
llvm-svn: 198432
That's a mouthful, and not necessarily the final name. This also
reflects a semantic change where this attribute is now on the
protocol itself instead of a class. This attribute will require
that a protocol, when adopted by a class, is explicitly implemented
by the class itself (instead of walking the super class chain).
Note that this attribute is not "done". This should be considered
a WIP.
llvm-svn: 196955
don't assume that it inherits the designated initializers from the super class.
If the assumption was wrong because a new initializer was a designated one that was not marked as such,
we will emit misleading warnings for subclasses of the interface.
llvm-svn: 196476
super another initializer and when the implementation does not delegate to
another initializer via a call on 'self'.
A secondary initializer is an initializer method not marked as a designated
initializer within a class that has at least one initializer marked as a
designated initializer.
llvm-svn: 196318
designated initializers of an interface.
If the interface declaration does not have methods marked as designated
initializers then the interface inherits the designated initializers of
its super class.
llvm-svn: 196315
This is still an experimental attribute, but I wanted it in tree
for review. It may still get yanked.
This attribute can only be applied to a class @interface, not
a class extension or category. It does not change the type
system rules for Objective-C, but rather the implementation checking
for Objective-C classes that explicitly conform to a protocol.
During protocol conformance checking, clang recursively searches
up the class hierarchy for the set of methods that compose
a protocol. This attribute will cause the compiler to not consider
the methods contributed by a super class, its categories, and those
from its ancestor classes. Thus this attribute is used to force
subclasses to redeclare (and hopefully re-implement) methods if
they decide to explicitly conform to a protocol where some of those
methods may be provided by a super class.
This attribute intentionally leaves out properties, which are associated
with state. This attribute only considers methods (at least right now)
that are non-property accessors. These represent methods that "do something"
as dictated by the protocol. This may be further refined, and this
should be considered a WIP until documentation gets written or this
gets removed.
llvm-svn: 195533
This enables a micro-optimization in protocol conformance checking
to not examine the class hierarchy twice per method.
As part of this change, remove the default arguments from lookupInstanceMethod()
and lookupClassMethod(). It was becoming very redundant. For clients
needing the default arguments, have them use the full API instead of
these convenience methods.
llvm-svn: 195532
can't accidentally be allocated the wrong way (missing prefix data for decls
from AST files, for instance) and simplifies the CreateDeserialized functions a
little. An extra DeclContext* parameter to the not-from-AST-file operator new
allows us to ensure that we don't accidentally call the wrong one when
deserializing (when we don't have a DeclContext), allows some extra checks, and
prepares for some planned modules-related changes to Decl allocation.
No functionality change intended.
llvm-svn: 195426
After implementing this patch, a few concerns about the language
feature itself emerged in my head that I had previously not considered.
I want to resolve those design concerns first before having
a half-designed language feature in the tree.
llvm-svn: 195328
The idea is to allow a class to stipulate that its methods (and those
of its parents) cannot be used for protocol conformance in a subclass.
A subclass is then explicitly required to re-implement those methods
of they are present in the class marked with this attribute.
Currently the attribute can only be applied to an @interface, and
not a category or class extension. This is by design. Unlike
protocol conformance, where a category can add explicit conformance
of a protocol to class, this anti-conformance really needs to be
observed uniformly by all clients of the class. That's because
the absence of the attribute implies more permissive checking of
protocol conformance.
This unfortunately required changing method lookup in ObjCInterfaceDecl
to take an optional protocol parameter. This should not slow down
method lookup in most cases, and is just used for protocol conformance.
llvm-svn: 195323
migrate to 'copy attribute if Object
class implements NSCopying otherwise
assume implied 'strong'. Remove
lifetime qualifier on property as it has
moved to property's attribute. Added TODO
comment for future work by poking into
setter implementation.
llvm-svn: 186037
Check for invalid decls in ObjCMethodDecl::getNextRedeclaration(); otherwise if we start from an invalid redeclaration
of an @implementation we would move to the @interface and not reach the original declaration again.
Fixes rdar://14024851
llvm-svn: 182951
protocols that declare the same property of incompatible
types, issue a warning when class implementation synthesizes
the property. // rdar://13075400
llvm-svn: 182316
patch -n r180198.
When reporting on missing property accessor implementation in
categories, do not report when they are declared in primary class,
class's protocol, or one of it super classes or in of the other
categories. // rdar://13713098
llvm-svn: 180580
categories, do not report when they are declared in primary class,
class's protocol, or one of it super classes. This is because,
its class is going to implement them. // rdar://13713098
llvm-svn: 180198
When we are in a implementation, we check the global method pool whether there were category
methods with the same selector. If there were none (common case) we don't need to do lookups for
overridden methods again.
Note that for an interface method (if we don't encounter its implementation), it is considered that
it overrides methods that were declared before it, not for category methods introduced after it.
This is tradeoff in favor of performance, since it is expensive to do lookups in case there was a
category, and moving the global method pool to ASTContext (so we can check it) would increase complexity.
rdar://13508196
llvm-svn: 179654
This reverts commit r179436.
Due to caching, it was possible that we could miss overridden methods that
were introduced by categories later on.
Along with reverting the commit I also included a test case that would have caught this.
llvm-svn: 179547
Use an newly introduce ASTContext::getBaseObjCCategoriesAfterInterface() which caches its
results instead of re-calculating the categories multiple times.
llvm-svn: 179436
When using modules we should not ignore overridden methods from
categories that are hidden because the module is not visible.
This will give more consistent results (when imports change) and it's more
correct since the methods are indeed overridden even if they are not "visible"
for lookup purposes.
rdar://13350796
llvm-svn: 178374
is issused for on overriding 'readwrite'
property which is not auto-synthesized.
Buttom line is that if hueristics determine
that there will be a user implemented setter,
no warning will be issued. // rdar://13388503
llvm-svn: 177662
in the course of property synthesis deterministic (ordered
by their type size), instead of having hashtable order
(as it is currently). // rdar://13192366
llvm-svn: 175100
visible.
The basic problem here is that a given translation unit can use
forward declarations to form pointers to a given type, say,
class X;
X *x;
and then import a module that includes a definition of X:
import XDef;
We will then fail when attempting to access a member of X, e.g.,
x->method()
because the AST reader did not know to look for a default of a class
named X within the new module.
This implementation is a bit of a C-centric hack, because the only
definitions that can have this property are enums, structs, unions,
Objective-C classes, and Objective-C protocols, and all of those are
either visible at the top-level or can't be defined later. Hence, we
can use the out-of-date-ness of the name and the identifier-update
mechanism to force the update.
In C++, we will not be so lucky, and will need a more advanced
solution, because the definitions could be in namespaces defined in
two different modules, e.g.,
// module 1
namespace N { struct X; }
// module 2
namespace N { struct X { /* ... */ }; }
One possible implementation here is for C++ to extend the information
associated with each identifier table to include the declaration IDs
of any definitions associated with that name, regardless of
context. We would have to eagerly load those definitions.
llvm-svn: 174794
consider (sub)module visibility.
The bulk of this change replaces myriad hand-rolled loops over the
linked list of Objective-C categories/extensions attached to an
interface declaration with loops using one of the four new category
iterator kinds:
visible_categories_iterator: Iterates over all visible categories
and extensions, hiding any that have their "hidden" bit set. This is
by far the most commonly used iterator.
known_categories_iterator: Iterates over all categories and
extensions, ignoring the "hidden" bit. This tends to be used for
redeclaration-like traversals.
visible_extensions_iterator: Iterates over all visible extensions,
hiding any that have their "hidden" bit set.
known_extensions_iterator: Iterates over all extensions, whether
they are visible to normal name lookup or not.
The effect of this change is that any uses of the visible_ iterators
will respect module-import visibility. See the new tests for examples.
Note that the old accessors for categories and extensions are gone;
there are *Raw() forms for some of them, for those (few) areas of the
compiler that have to manipulate the linked list of categories
directly. This is generally discouraged.
Part two of <rdar://problem/10634711>.
llvm-svn: 172665
This does limit these typedefs to being sequences, but no current usage
requires them to be contiguous (we could expand this to a more general
iterator pair range concept at some point).
Also, it'd be nice if SmallVector were constructible directly from an ArrayRef
but this is a bit tricky since ArrayRef depends on SmallVectorBaseImpl for the
inverse conversion. (& generalizing over all range-like things, while nice,
would require some nontrivial SFINAE I haven't thought about yet)
llvm-svn: 170482
Currently, Objective-C does not support class properties, even though it
allows calling class methods with dot syntax.
No intended functionality change; purely optimization.
llvm-svn: 165716
methods looking for documentation on a particular base
class inherited by any method that overrides the base class.
In case of redeclaration, as when objc method is defined
in the implementation, it also looks up for documentation
in class/class extension being redeclared.
llvm-svn: 165643
Then, switch users of PropertyIfSetterOrGetter and LookupPropertyDecl
(the latter by name) over to findPropertyDecl. This actually makes
-Wreceiver-is-weak a bit stronger than it was before.
llvm-svn: 165628
This more accurately reflects its use: this flag is set when a method
matches the getter or setter name for a property in the same class,
and does not actually specify whether or not the definition of the method
will be synthesized (either implicitly or explicitly with @synthesize).
This renames the setter and backing field as well, and changes the
(soon-to-be-obsolete?) XML dump format to use 'property_accessor'
instead of 'synthesized'.
llvm-svn: 165626
ASTContext to the ObjCMethodDecl, and have the more generic
ASTContext::getOverriddenMethods() use the ObjCMethodDecl::getOverriddenMethods()
function.
llvm-svn: 165518
whether that function/method already has a body (loaded from some
other AST file), as introduced in r165137. Delay this check until
after the redeclaration chains have been wired up.
While I'm here, make the loading of method bodies lazy.
llvm-svn: 165513
Also, fix a subtle bug, which occurred due to lookupPrivateMethod
defined in DeclObjC.h not looking up the method inside parent's
categories.
Note, the code assumes that Class's parent object has the same methods
as what's in the Root class of a the hierarchy, which is a heuristic
that might not hold for hierarchies which do not descend from NSObject.
Would be great to fix this in the future.
llvm-svn: 160885
method definition that has its '{' attached to the method name without
a space.
With a method like:
-(id)meth{
.....
}
the logic in ObjCMethodDecl that determined the selector locations got
confused because it was initialized based on an end location for '{' but
that end location changed to '}' after the method was finished.
Fix this by having an immutable end location for the declarator and
for getLocEnd() get the end location from the body itself.
Fixes rdar://11659739.
llvm-svn: 158583
In addition, I've made the pointer and reference typedef 'void' rather than T*
just so they can't get misused. I would've omitted them entirely but
std::distance likes them to be there even if it doesn't use them.
This rolls back r155808 and r155869.
Review by Doug Gregor incorporating feedback from Chandler Carruth.
llvm-svn: 158104
filter_decl_iterator had a weird mismatch where both op* and op-> returned T*
making it difficult to generalize this filtering behavior into a reusable
library of any kind.
This change errs on the side of value, making op-> return T* and op* return
T&.
(reviewed by Richard Smith)
llvm-svn: 155808
ObjCInterfaceDecl::getReferencedProtocols(), because the iterators are safe to use
even if the caller did not check that the interface is a definition.
llvm-svn: 152597
has been declared in its primary class, superclass,
or in one of their protocols, no need to issue unimplemented method.
// rdar://10823023
llvm-svn: 150206
protocol, record the definition pointer in the canonical declaration
for that entity, and then propagate that definition pointer from the
canonical declaration to all other deserialized declarations. This
approach works well even when deserializing declarations that didn't
know about the original definition, which can occur with modules.
A nice bonus from this definition-deserialization approach is that we
no longer need update records when a definition is added, because the
redeclaration chains ensure that the if any declaration is loaded, the
definition will also get loaded.
llvm-svn: 148223
Fariborz Jahanian