For -z separate-code and -z separate-loadable-segments:
When RW is present, the RX to RW transition is aligned with max-page-size.
When RW is absent, the RX to non-SHF_ALLOC transition should use max-page-size as well.
Currently, LLD does not support the complete set of ARM group relocations.
Given that I intend to start using these in the Linux kernel [0], let's add
support for these.
This implements the group processing as documented in the ELF psABI. Notably,
this means support is dropped for very far symbol references that also carry a
small component, where the immediate is rotated in such a way that only part of
it wraps to the other end of the 32-bit word. To me, it seems unlikely that
this is something anyone could be relying on, but of course I could be wrong.
[0] https://lore.kernel.org/r/20211122092816.2865873-8-ardb@kernel.org/
Reviewed By: peter.smith, MaskRay
Differential Revision: https://reviews.llvm.org/D114172
This allows --power10-stubs= and --[no-]power10-stubs to override each other
(they are position dependent in GNU ld).
Also improve --help messages and the manpage.
Note: GNU ld's default "auto" mode uses heuristics to decide whether Power10
instructions are used. Arguably it is a design mistake of R_PPC64_REL24_NOTOC
(acked by the relevant folks on a libc-alpha discussion). We don't implement
"auto", so the default --power10-stubs is the same as "yes".
The canonical term is "extract" (GNU ld documentation, Solaris's `-z *extract`
options). Avoid inventing a term and match --why-extract. (ld64 prefers "load"
but the word is overloaded too much)
Mostly MFC, except for --help messages and the header row in
--print-archive-stats output.
BaseCommand was picked when PHDRS/INSERT/etc were not implemented. Rename it to
SectionCommand to match `sectionCommands` and make it clear that the commands
are used in SECTIONS (except a special case for SymbolAssignment).
Also, improve naming of some BaseCommand variables (base -> cmd).
This partially reverts r315409: the description applies to LinkerScript, but not
to OutputSection.
The name "sectionCommands" is used in both LinkerScript::sectionCommands and
OutputSection::sectionCommands, which may lead to confusion.
"commands" in OutputSection has no ambiguity because there are no other types
of commands.
The attribute 'r' allows (or disallows for the negative case) read-only
sections, i.e. ones without the SHF_WRITE flag, to be assigned to the
memory region. Before the patch, lld could put a section in the wrong
region or fail with "error: no memory region specified for section".
Differential Revision: https://reviews.llvm.org/D113771
The current TLSDESC optimization code assumes:
```
leaq x@tlsdesc(%rip), %rax
call *x@tlscall(%rax) # adjacent
```
From https://gitlab.freedesktop.org/mesa/mesa/-/issues/5665 , it seems that the
two instructions may not be adjacent in GCC 10's output:
```
leaq x@tlsdesc(%rip), %rax
something else
call *x@tlscall(%rax)
```
This patch supports the case. While here, support non-RAX registers for
R_X86_64_GOTPC32_TLSDESC, in case the compiler generates inefficient:
```
leaq x@tlsdesc(%rip), %rcx # or %rdx, %rbx, %rdi, ...
movq %rcx, %rax
call *x@tlscall(%rax) # GNU ld/gold error for non-RAX
```
Differential Revision: https://reviews.llvm.org/D114416
Fix a null pointer dereference when .got.plt is discarded.
This also adds a test for discarding `.plt`.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D114180
When aligning the start address of an output section introduces a gap between the current dot pointer
and the new aligned address, we were already properly expanding the memory region, if available.
D74286 introduced a new behavior to also align the LMA address if an LMA region is specified.
However, this did not expand the corresponding LMA region.
Now, we also expand the LMA region if it is set.
This fixes PR52510.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D114166
Non-allocatable sections are not part of the memory image of the
program, so there is no need to find memory regions for them either
matching properties or handling explicit assignments. The early test
and return help to simplify LinkerScript::findMemoryRegion() a bit.
Differential Revision: https://reviews.llvm.org/D113768
This brings back the original version of D81359.
I have found several use cases now.
* Unlike GNU ld, LLD's relocation processing is one pass. If we decide to
optimize(relax) R_X86_64_{,REX_}GOTPCRELX, we will suppress GOT generation and
cannot undo the decision later. Optimizing R_X86_64_REX_GOTPCRELX can usually
make it easy to hit `relocation R_X86_64_REX_GOTPCRELX out of range` because
the distance to GOT is usually shorter. Without --no-relax, the user has to
recompile with `-Wa,-mrelax-relocations=no`.
* The option would help during my investigationg of the root cause of https://git.kernel.org/linus/09e43968db40c33a73e9ddbfd937f46d5c334924
* There is need for relaxation for AArch64 & RISC-V. Implementing this for
x86-64 improves consistency with little target-specific cost (two-line
X86_64.cpp change).
Reviewed By: alexander-shaposhnikov
Differential Revision: https://reviews.llvm.org/D113615
This change implements support for R_ARM_THM_JUMP8 relocation in
addition to R_ARM_THM_JUMP11 which is already supported by LLD.
Differential Revision: https://reviews.llvm.org/D21225
An orphan section should be placed in the same memory region as its
anchor section if the latter specifies the memory region explicitly.
If there is no explicit assignment for the anchor section in the linker
script, its memory region is selected by matching attributes, and the
same should be done for the orphan section.
Before the patch, some scripts that were handled smoothly in GNU ld
caused an "error: no memory region specified for section" in lld.
Differential Revision: https://reviews.llvm.org/D112925
PR52408 reported an sh_info=0 instance. I have seen sh_info=0
independently before.
sh_info>=num_sections is probably very rare. Just use one diagnostic for
the two types of errors.
Delete invalid-relocations.test which is covered by invalid/bad-reloc-target.test
Differential Revision: https://reviews.llvm.org/D113466
This diff makes several amendments to the local file caching mechanism
which was migrated from ThinLTO to Support in
rGe678c51177102845c93529d457b020f969125373 in response to follow-up
discussion on that commit.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D113080
This reverts commit 5cbec88cbf.
Vitaly said that 2faac77f26 actually works.
Sanitizer's armv7-linux-androideabi24 configuration has other issues which haven't been identified yet, but that's unrelated to the empty symbol name issue.
The "symbol 'foo' has no type" diagnostic tries to inform that copy
relocation/canonical PLT entry cannot be used, but the diagnostic is often
incorrect and confusing.
The hint does not pull its weight:
* adding -Wl,-z,notext often won't work (relocation types other than `symbolRel`, e.g. `R_AARCH64_LDST32_ABS_LO12_NC`)
* for pure (no assembly) C/C++ projects, the "-fPIC" hint is sufficient
Many diagnostics use `getErrorPlace` or `getErrorLocation` to report a location.
In the presence of line table debug information, `getErrorPlace` uses a source
file location and ignores the object file location. However, the object file
location is sometimes more useful.
This patch changes "undefined symbol" and "out of range" diagnostics to report
both object/source file locations. Other diagnostics can use similar format if
needed.
The key idea is to let `InputSectionBase::getLocation` report the object file
location and use `getSrcMsg` for source file/line information. `getSrcMsg`
doesn't leverage `STT_FILE` information yet, but I think the temporary lack of
the functionality is ok.
For the ARM "branch and link relocation" diagnostic, I arbitrarily place the
source file location at the end of the line. The diagnostic is not very common
so its formatting doesn't need to be pretty.
Differential Revision: https://reviews.llvm.org/D112518
For `InputSection` `.foo`, its `InputBaseSection::{areRelocsRela,firstRelocation,numRelocation}` basically
encode the information of `.rel[a].foo`. However, one uint32_t (the relocation section index)
suffices. See the implementation of `relsOrRelas`.
This change decreases sizeof(InputSection) from 184 to 176 on 64-bit Linux.
The maximum resident set size linking a large application (1.2G output) decreases by 0.39%.
Differential Revision: https://reviews.llvm.org/D112513
The hack is irrelevant for two reasons:
* binutils 2.24 is quite old and cannot handle R_X86_64_REX_GOTPCRELX from 2016 onwards anyway
* `canMergeToProgbits` allows combining SHT_INIT_ARRAY/SHT_FINI_ARRAY into SHT_PROGBITS
For a function call (using the default `-fplt`), GCC `-mcmodel=large` generates an assembly modifier which
leads to an R_X86_64_PLTOFF64 relocation. In real world,
http://git.ageinghacker.net/jitter (used by GNU poke) uses `-mcmodel=large`.
R_X86_64_PLTOFF64's formula is (if preemptible) `L - GOT + A` or (if non-preemptible) `S - GOT + A`
where `GOT` is (confusingly) the address of `.got.plt`
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D112386
Taken from Chih-Mao Chen's D100835.
RelExpr has 64 bits now and needs the extension to support new members
(`R_PLT_GOTPLT` for `R_X86_64_PLTOFF64` support).
Note: RelExpr needs to have at least a member >=64 to prevent
-Wtautological-constant-out-of-range-compare for `if (expr >= 64)`.
Reviewed By: arichardson, peter.smith
Differential Revision: https://reviews.llvm.org/D112385
GNU ld doesn't support `--no-pic-executable`.
`-p` has been removed from likely the only use case (Linux kernel) for over 2.5 years: https://git.kernel.org/linus/091bb549f7722723b284f63ac665e2aedcf9dec9
`--no-add-needed` was the pre-binutils-2.23 spelling for `--no-copy-dt-needed-entries`.
The legacy alias is irrelevant in 2021.
If segments are defined in a linker script, placing an orphan section
before the found closest-rank section can result in adding it in a
previous segment and changing flags of that segment. This happens if
the orphan section has a lower sort rank than the found section. To
avoid that, the patch forces orphan sections to be moved after the
found section if segments are explicitly defined.
Differential Revision: https://reviews.llvm.org/D111717
We would like to move ThinLTO’s battle-tested file caching mechanism to
the LLVM Support library so that we can use it elsewhere in LLVM.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D111371
We would like to move ThinLTO’s battle-tested file caching mechanism to
the LLVM Support library so that we can use it elsewhere in LLVM.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D111371
I think D79300 has fixed the D51892 (`__i686.get_pc_thunk.bx`) issue, so
we can bring back rL330869.
D79300 says `would error undefined symbol instead of the more relevant discarded section`
but it doesn't reproduce now.
This avoids a quirk in `isUndefWeak()`.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D111365
Most architectures use .got instead of .got.plt, so switching the default can
minimize customization.
This fixes an issue for SPARC V9 which uses .got .
AVR, AMDGPU, and MSP430 don't seem to use _GLOBAL_OFFSET_TABLE_.
(As I mentioned in https://reviews.llvm.org/D62609#1534158 ,
the condition for using bti c for executable can be loosened.)
In two cases the address of a PLT may escape:
* canonical PLT entry for a STT_FUNC
* non-preemptible STT_GNU_IFUNC which is converted to STT_FUNC
The first case can be detected with `needsPltAddr`.
The second case is not straightforward to detect because for the Relocations.cpp
created `directSym`, it's difficult to know whether the associated `sym` has
exercised the `!needsPlt(expr)` code path. Just use the conservative `isInIplt`
condition. A non-preemptible ifunc not referenced by non-GOT-generating
non-PLT-generating relocations will have an unneeded `bti c`, but the cost is acceptable.
The second case fixes a bug as well: a -shared link may have non-preemptible ifunc.
Before the patch we did not emit `bti c` and could be wrong if the PLT address escaped.
GNU ld doesn't handle the case: `relocation R_AARCH64_ADR_PREL_PG_HI21 against STT_GNU_IFUNC symbol 'ifunc2' isn't handled by elf64_aarch64_final_link_relocate` (https://sourceware.org/bugzilla/show_bug.cgi?id=28370)
For -shared, if BTI is enabled but PAC is disabled, the PLT entry size increases
from 16 to 24 because we have to select the PLT scheme early, but the cost is
acceptable.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D110217
Currenlty PseudoProbeInserter is a pass conditioned on a target switch. It works well with a single clang invocation. It doesn't work so well when the backend is called separately (i.e, through the linker or llc), where user has always to pass -pseudo-probe-for-profiling explictly. I'm making the pass a default pass that requires no command line arg to trigger, but will be actually run depending on whether the CU comes with `llvm.pseudo_probe_desc` metadata.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D110209
Similar to D69607 but for archive member extraction unrelated to GC. This patch adds --why-extract=.
Prior art:
GNU ld -M prints
```
Archive member included to satisfy reference by file (symbol)
a.a(a.o) main.o (a)
b.a(b.o) (b())
```
-M is mainly for input section/symbol assignment <-> output section mapping
(often huge output) and the information may appear ad-hoc.
Apple ld64
```
__Z1bv forced load of b.a(b.o)
_a forced load of a.a(a.o)
```
It doesn't say the reference file.
Arm's proprietary linker
```
Selecting member vsnprintf.o(c_wfu.l) to define vsnprintf.
...
Loading member vsnprintf.o from c_wfu.l.
definition: vsnprintf
reference : _printf_a
```
---
--why-extract= gives the user the full data (which is much shorter than GNU ld
-Map). It is easy to track a chain of references to one archive member with a
one-liner, e.g.
```
% ld.lld main.o a_b.a b_c.a c.a -o /dev/null --why-extract=- | tee stdout
reference extracted symbol
main.o a_b.a(a_b.o) a
a_b.a(a_b.o) b_c.a(b_c.o) b()
b_c.a(b_c.o) c.a(c.o) c()
% ruby -ane 'BEGIN{p={}}; p[$F[1]]=[$F[0],$F[2]] if $.>1; END{x="c.a(c.o)"; while y=p[x]; puts "#{y[0]} extracts #{x} to resolve #{y[1]}"; x=y[0] end}' stdout
b_c.a(b_c.o) extracts c.a(c.o) to resolve c()
a_b.a(a_b.o) extracts b_c.a(b_c.o) to resolve b()
main.o extracts a_b.a(a_b.o) to resolve a
```
Archive member extraction happens before --gc-sections, so this may not be a live path
under --gc-sections, but I think it is a good approximation in practice.
* Specifying a file avoids output interleaving with --verbose.
* Required `=` prevents accidental overwrite of an input if the user forgets `=`. (Most of compiler drivers' long options accept `=` but not ` `)
Differential Revision: https://reviews.llvm.org/D109572
When enable CSPGO for ThinLTO, there are profile cfg mismatch warnings that will cause lld-link errors (with /WX)
due to source changes (e.g. `#if` code runs for profile generation but not for profile use)
To disable it we have to use an internal "/mllvm:-no-pgo-warn-mismatch" option.
In contrast clang uses option ”-Wno-backend-plugin“ to avoid such warnings and gcc has an explicit "-Wno-coverage-mismatch" option.
Add "lto-pgo-warn-mismatch" option to lld COFF/ELF to help turn on/off the profile mismatch warnings explicitly when build with ThinLTO and CSPGO.
Differential Revision: https://reviews.llvm.org/D104431
When enable CSPGO for ThinLTO, there are profile cfg mismatch warnings that will cause lld-link errors (with /WX).
To disable it we have to use an internal "/mllvm:-no-pgo-warn-mismatch" option.
In contrast clang uses option ”-Wno-backend-plugin“ to avoid such warnings and gcc has an explicit "-Wno-coverage-mismatch" option.
Add this "lto-pgo-warn-mismatch" option to lld to help turn on/off the profile mismatch warnings explicitly when build with ThinLTO and CSPGO.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D104431
This patch enables compressed input sections on big-endian targets by
checking the target endianness and selecting an appropriate `Chdr`
structure.
Fixes PR51369
Differential Revision: https://reviews.llvm.org/D107635
Copy relocation on a non-default version symbol is unsupported and can crash at
runtime. Fortunately there is a one-line fix which works for most cases:
ensure `getSymbolsAt` unconditionally returns `ss`.
If two non-default version symbols are defined at the same place and both
are copy relocated, our implementation will copy relocated them into different
addresses. The pointer inequality is very unlikely an issue. In GNU ld, copy
relocating version aliases seems to create more pointer inequality problems than
us.
(
In glibc, sys_errlist@GLIBC_2.2.5 sys_errlist@GLIBC_2.3 sys_errlist@GLIBC_2.4
are defined at the same place, but it is unlikely they are all copy relocated in
one executable. Even if so, the variables are read-only and pointer inequality
should not be a problem.
)
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107535
Currently version script patterns are ignored for .symver produced
non-default version (single @) symbols. This makes such symbols
not localizable by `local:`, e.g.
```
.symver foo3_v1,foo3@v1
.globl foo_v1
foo3_v1:
ld.lld --version-script=a.ver -shared a.o
```
This patch adds the support:
* Move `config->versionDefinitions[VER_NDX_LOCAL].patterns` to `config->versionDefinitions[versionId].localPatterns`
* Rename `config->versionDefinitions[versionId].patterns` to `config->versionDefinitions[versionId].nonLocalPatterns`
* Allow `findAllByVersion` to find non-default version symbols when `includeNonDefault` is true. (Note: `symtab` keys do not have `@@`)
* Make each pattern check both the unversioned `pat.name` and the versioned `${pat.name}@${v.name}`
* `localPatterns` can localize `${pat.name}@${v.name}`. `nonLocalPatterns` can prevent localization by assigning `verdefIndex` (before `parseSymbolVersion`).
---
If a user notices new `undefined symbol` errors with a version script containing
`local: *;`, the issue is likely due to a missing `global:` pattern.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107234
Due to an assembler design flaw (IMO), `.symver foo,foo@v1` produces two symbols `foo` and `foo@v1` if `foo` is defined.
* `v1 {};` produces both `foo` and `foo@v1`, but GNU ld only produces `foo@v1`
* `v1 { foo; };` produces both `foo@@v1` and `foo@v1`, but GNU ld only produces `foo@v1`
* `v2 { foo; };` produces both `foo@@v2` and `foo@v1`, matching GNU ld. (Tested by symver.s)
This patch implements the GNU ld behavior by reusing the symbol redirection mechanism
in D92259. The new test symver-non-default.s checks the first two cases.
Without the patch, the second case will produce `foo@v1` and `foo@@v1` which
looks weird and makes foo unnecessarily default versioned.
Note: `.symver foo,foo@v1,remove` exists but the unfortunate `foo` will not go
away anytime soon.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107235
Currently version script patterns are ignored for .symver produced
non-default version (single @) symbols. This makes such symbols
not localizable by `local:`, e.g.
```
.symver foo3_v1,foo3@v1
.globl foo_v1
foo3_v1:
ld.lld --version-script=a.ver -shared a.o
# In a.out, foo3@v1 is incorrectly exported.
```
This patch adds the support:
* Move `config->versionDefinitions[VER_NDX_LOCAL].patterns` to `config->versionDefinitions[versionId].localPatterns`
* Rename `config->versionDefinitions[versionId].patterns` to `config->versionDefinitions[versionId].nonLocalPatterns`
* Allow `findAllByVersion` to find non-default version symbols when `includeNonDefault` is true. (Note: `symtab` keys do not have `@@`)
* Make each pattern check both the unversioned `pat.name` and the versioned `${pat.name}@${v.name}`
* `localPatterns` can localize `${pat.name}@${v.name}`. `nonLocalPatterns` can prevent localization by assigning `verdefIndex` (before `parseSymbolVersion`).
---
If a user notices new `undefined symbol` errors with a version script containing
`local: *;`, the issue is likely due to a missing `global:` pattern.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107234
GNU ld doesn't support multiple SHF_TLS SHT_NOBITS output sections (it restores
the address after an SHF_TLS SHT_NOBITS section, so consecutive SHF_TLS
SHT_NOBITS sections will have conflicting address ranges).
That said, `threadBssOffset` implements limited support for consecutive SHF_TLS
SHT_NOBITS sections. (SHF_TLS SHT_PROGBITS following a SHF_TLS SHT_NOBITS can still be
incorrect.)
`.` in an output section description of an SHF_TLS SHT_NOBITS section is
incorrect. (https://lists.llvm.org/pipermail/llvm-dev/2021-July/151974.html)
This patch saves the end address of the previous tbss section in
`ctx->tbssAddr`, changes `dot` in the beginning of `assignOffset` so
that `.` evaluation will be correct.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107208
This is available in GNU ld 2.35 and can be seen as a shortcut for multiple
--export-dynamic-symbol, or a --dynamic-list variant without the symbolic intention.
In the long term, this option probably should be preferred over --dynamic-list.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107317
This option is a subset of -Bsymbolic-functions. It applies to STB_GLOBAL
STT_FUNC definitions.
The address of a vague linkage function (STB_WEAK STT_FUNC, e.g. an inline
function, a template instantiation) seen by a -Bsymbolic-functions linked
shared object may be different from the address seen from outside the shared
object. Such cases are uncommon. (ELF/Mach-O programs may use
`-fvisibility-inlines-hidden` to break such pointer equality. On Windows,
correct dllexport and dllimport are needed to make pointer equality work.
Windows link.exe enables /OPT:ICF by default so different inline functions may
have the same address.)
```
// a.cc -> a.o -> a.so (-Bsymbolic-functions)
inline void f() {}
void *g() { return (void *)&f; }
// b.cc -> b.o -> exe
// The address is different!
inline void f() {}
```
-Bsymbolic-non-weak-functions is a safer (C++ conforming) subset of
-Bsymbolic-functions, which can make such programs work.
Implementations usually emit a vague linkage definition in a COMDAT group. We
could detect the group (with more code) but I feel that we should just check
STB_WEAK for simplicity. A weak definition will thus serve as an escape hatch
for rare cases when users want interposition on definitions.
GNU ld feature request: https://sourceware.org/bugzilla/show_bug.cgi?id=27871
Longer write-up: https://maskray.me/blog/2021-05-16-elf-interposition-and-bsymbolic
If Linux distributions migrate to protected non-vague-linkage external linkage
functions by default, the linker option can still be handy because it allows
rapid experiment without recompilation. Protected function addresses currently
have deep issues in GNU ld.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D102570
This is somewhat of a repeat of D66658 but for sections in PT_TLS
segments. Although such sections don't need to be aligned such that
address and offset are congruent modulo the page size, they do need
to be congruent modulo the segment alignment, otherwise the
whole PT_TLS will be unaligned. We therefore use the normal calculation
to determine the section's address within the PT_LOAD rather than
bailing out early due to being SHT_NOBITS.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D106987
clang may place dynamic initializations for explicitly specialized class
template static data members in comdat.
Such in-comdat SHT_INIT_ARRAY was an abuse but we have to work around it for a while.
Change removeUnusedSyntheticSections() to actually remove empty
SyntheticSections in inputSections.
In addition to doing what removeUnusedSyntheticSections() was meant
to do, this will also make the shuffle-sections tests, which shuffles
inputSections, less sensitive to empty Synthetic Sections that
will not appear in the final image.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D106427
Change-Id: I589eaf596472161a4395fb658aea0fad73318088
Fangrui Song