This patch ensures that the typo fixit for the @try/@finally/@autoreleasepool {}
directive is shown only when we're parsing an actual statement where such
directives can actually be present.
rdar://19669565
Differential Revision: https://reviews.llvm.org/D26916
llvm-svn: 288334
This adds the access qualifier to the Pipe Type, rather than using a class
hierarchy.
It also fixes mergeTypes for Pipes, by disallowing merges. Only identical
pipe types can be merged. The test case in invalid-pipes-cl2.0.cl is added
to check that.
llvm-svn: 288332
Summary:
The fix is to make sure llvm does not pull in dlopen() in configurations where it
is not available.
Reviewers: tberghammer, beanz
Subscribers: danalbert, srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D26505
llvm-svn: 288331
Feasibility is checked late on its own but early it is hidden behind
the "PollyProcessUnprofitable" guard. This change will make sure we opt
out early if the runtime context is infeasible anyway.
llvm-svn: 288329
Summary: This patch adds a check and an error message to gnutools::Linker::ConstructJob in case the architecture is not supported. For most other operating systems, the error message is created in lib/Basic/Targets.cpp:AllocateTarget, but when construction the linker arguments for the gnutools linker a supported architecture is required.
Reviewers: rafael, joerg, echristo
Subscribers: mehdi_amini, joerg, dschuff, cfe-commits
Differential Revision: https://reviews.llvm.org/D27066
llvm-svn: 288327
Summary:
Since the function is way too big already, I tried at least to factor out the
timeout computation stuff into a separate function. I've tried to make the new
code semantically equivalent, and it also makes sense when I look at it as a done
deal.
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D27258
llvm-svn: 288326
In '[DBG] Allow to emit the RTC value at runtime' the diagnostics were printed
without a newline at the end of each diagnostic. We add such a newline to
improve readability.
llvm-svn: 288323
This allows us to remove a few uses of IRObjectFile::getSymbolGV() in
llvm-nm.
While here change host-dependent logic in llvm-nm to target-dependent
logic.
Differential Revision: https://reviews.llvm.org/D27075
llvm-svn: 288320
This class represents a symbol table built from in-memory IR. It provides
access to GlobalValues and should only be used if such access is required
(e.g. in the LTO implementation). We will eventually change IRObjectFile
to read from a bitcode symbol table rather than using ModuleSymbolTable,
so it would not be able to expose the module.
Differential Revision: https://reviews.llvm.org/D27073
llvm-svn: 288319
This is no longer the recommended way to load modules for importing, so it should not be public API.
Differential Revision: https://reviews.llvm.org/D27292
llvm-svn: 288316
The assertions were wrong; we need to call getEncodingData() on the element,
not the array. While here, simplify the skipRecord() implementation for Fixed
and Char6 arrays. This is tested by the code I added to llvm-bcanalyzer
which makes sure that we can skip any record.
Differential Revision: https://reviews.llvm.org/D27241
llvm-svn: 288315
In various places in LLD's hot loops, we have expressions of the form
"E == R_FOO || E == R_BAR || ..." (E is a RelExpr).
Some of these expressions are quite long, and even though they usually go just
a very small number of ways and so should be well predicted, they can still
occupy branch predictor resources harming other parts of the code, or they
won't be predicted well if they overflow branch predictor resources or if the
branches are too dense and the branch predictor can't track them all (the
compiler can in theory avoid this, at a cost in text size). And some of these
expressions are so large and executed so frequently that even when
well-predicted they probably still have a nontrivial cost.
This speedup should be pretty portable. The cost of these simple bit tests is
independent of:
- the target we are linking for
- the distribution of RelExpr's for a given link (which can depend on how the
input files were compiled)
- what compiler was used to compile LLD (it is just a simple bit test;
hopefully the compiler gets it right!)
- adding new target-dependent relocations (e.g. needsPlt doesn't pay any extra
cost checking R_PPC_PLT_OPD on x86-64 builds)
I did some rough measurements on clang-fsds and this patch gives over about 4%
speedup for a regular -O1 link, about 2.5% for -O3 --gc-sections and over 5%
for -O0. Sorry, I don't have my current machine set up for doing really
accurate measurements right now.
This also is just a bit cleaner. Thanks for Joerg for suggesting for
this approach.
Differential Revision: https://reviews.llvm.org/D27156
llvm-svn: 288314
- Rename currentBuffer -> getCurrentMB to start it with verb.
- Simplify containsString.
- Add llvm_unreachable at end of getCurrentMB.
llvm-svn: 288310
If LoopInfo is available during GVN, BasicAA will use it. However
MergeBlockIntoPredecessor does not update LI as it merges blocks.
This didn't use to cause problems because LI was freed before
GVN/BasicAA. Now with OptimizationRemarkEmitter, the lifetime of LI is
extended so LI needs to be kept up-to-date during GVN.
Differential Revision: https://reviews.llvm.org/D27288
llvm-svn: 288307
Summary:
it's often the case when the rules in the SpecialCaseList
are of the form hel.o*bar. That gives us a chance to build
trigram index to quickly discard 99% of inputs without
running a full regex. A similar idea was used in Google Code Search
as described in the blog post:
https://swtch.com/~rsc/regexp/regexp4.html
The check is defeated, if there's at least one regex
more complicated than that. In this case, all inputs
will go through the regex. That said, the real-world
rules are often simple or can be simplied. That considerably
speeds up compiling Chromium with CFI and UBSan.
As measured on Chromium's content_message_generator.cc:
before, CFI: 44 s
after, CFI: 23 s
after, CFI, no blacklist: 23 s (~1% slower, but 3 runs were unable to show the difference)
after, regular compilation to bitcode: 23 s
Reviewers: pcc
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D27188
llvm-svn: 288303
arguments from a declaration; despite what the standard says, this form of
deduction should not be considering exception specifications.
llvm-svn: 288301
Primarily: try to use DenseSet<StringRef> instead of
std::set<std::string>, and use pretty range algos where we can.
Small sizes were arbitrarily chosen.
llvm-svn: 288297
Support a new assembler directive, .import_global, to declare imported
global variables (i.e. those with external linkage and no
initializer). The linker turns these into wasm imports.
Patch by Jacob Gravelle
Differential Revision: https://reviews.llvm.org/D26875
llvm-svn: 288296
This patch is to implement sema and parsing for 'teams distribute parallel for simd' pragma.
Differential Revision: https://reviews.llvm.org/D27084
llvm-svn: 288294
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288293
VariableDbgInfo is per function data, so it makes sense to have it with
the function instead of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27186
llvm-svn: 288292
This is per function data so it is better kept at the function instead
of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27185
llvm-svn: 288291
Choosing a "cfi" name makes the intend a bit clearer in an assembly dump
and more importantly the assembly dumps are slightly more stable as the
numbers don't move around anymore when unrelated code calls
createTempSymbol() more or less often.
As they are temp labels the name doesn't influence the generated object
code.
Differential Revision: https://reviews.llvm.org/D27244
llvm-svn: 288290
Maintain the command line resolutions as a map to a list of resolutions
rather than a single resolution, and apply the resolutions in the order
observed. This is not only simpler but allows us to test the scenario where
the two symbols have different resolutions.
Differential Revision: https://reviews.llvm.org/D27285
llvm-svn: 288288
performed at the CodeGenModule level.
Would be NFC except we now also use a different uniquing structure so
that we don't get spurious conflicts if you ask for both an NSString
and a CFString for the same content (which is possible with builtins).
llvm-svn: 288287
Simon Pilgrim