This is a different approach from D98993 that should achieve most of the
same benefit. The two changes are:
1. Sort the list of associated child sections by section name
2. Do not consider associated sections to have children themselves
This fixes the main issue, which was that we sometimes considered an
.xdata section to have a child .pdata section. That lead to slow links
and larger binaries (less xdata folding).
Otherwise, this should be NFC: we go back to ignoring .debug/.gljmp and
other metadata sections rather than only looking at pdata/xdata. We
discovered that we do care about other associated sections, like ASan
global registration metadata.
chmod tries to be very helpful on some platforms and prevent naive mistakes, by warning the user. This results in the following error during the test:
```chmod: ...resolution-err.ll.tmp.resolution.txt: new permissions are r--rw-rw-, not r--r--r--```
To fix the test, call chmod with u.
Differential Revision: https://reviews.llvm.org/D100417
arm64_32 uses 32-bit GOT loads, so we should accept those
instructions in `ARM64Common::relaxGotLoad()` too.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D100229
It doesn't make sense to take just the base filename for archives when we emit
the full path for object files. (LLD-ELF emits the full path too.)
This will also make it easier to write a proper test for {D100147}.
Reviewed By: #lld-macho, oontvoo
Differential Revision: https://reviews.llvm.org/D100357
This could probably have been part of D99633, but I split it up to make
things a bit more reviewable. I also fixed some bugs in the implementation that
were masked through integer underflows when operating in 64-bit mode.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D99823
From what I can tell, it's pretty similar to arm64. The two main differences
are:
1. No 64-bit relocations
2. Stub code writes to 32-bit registers instead of 64-bit
Plus of course the various on-disk structures like `segment_command` are using
the 32-bit instead of the 64-bit variants.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D99822
Swift builds seem to use it. All it requires is emitting the
corresponding paths as STABS.
Fixes llvm.org/PR49385.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D100076
The test is loosely based off LLD-ELF's `thinlto.ll`. However, I
found that test questionable because the the -save_temps behavior it
checks for is identical regardless of whether we are running in single-
or multi-threaded mode. I tried writing a test based on `--time-trace`
but couldn't get it to run deterministically... so I've opted to just
skip checking that behavior for now.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D99356
If either `time-trace-granularity` or `time-trace-file` is specified, then don't make users specify `-time-trace`.
It seems silly that I have to type all three options, eg, `-time-trace -time-trace-file=- -time-trace-granularity=...`.
Differential Revision: https://reviews.llvm.org/D100011
We had been giving them a string index of zero, which actually corresponds to a
string with a single space due to {D89639}.
This was far from obvious in the old test because llvm-nm doesn't quote the
symbol names, making the empty string look identical to a string of a single
space. `dsymutil -s` quotes its strings, so I've changed the test accordingly.
Fixes llvm.org/PR48714. Thanks @clayborg for the tips!
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D100003
I noticed two problems with the previous implementation:
* N_ALT_ENTRY symbols weren't being handled correctly -- they should
determine the size of the previous symbol, even though they don't
cause a new section to be created
* The last symbol in a section had its size calculated wrongly;
the first subsection's size was used instead of the last one
I decided to take the opportunity to refactor things as well, mainly to
realize my observation
[here](https://reviews.llvm.org/D98837#inline-931511) that we could
avoid doing a binary search to match symbols with subsections. I think
the resulting code is a bit simpler too.
N Min Max Median Avg Stddev
x 20 4.31 4.43 4.37 4.3775 0.034162922
+ 20 4.32 4.43 4.38 4.3755 0.02799906
No difference proven at 95.0% confidence
Reviewed By: #lld-macho, alexshap
Differential Revision: https://reviews.llvm.org/D99972
"stub" is a bit too overloaded... we were using it to refer to
TAPI files, but it's also the name for the PLT trampolines in Mach-O.
Going ahead, let's just use "TAPI" or ".tbd" to refer to TAPI stuff.
Reviewed By: #lld-macho, oontvoo
Differential Revision: https://reviews.llvm.org/D99807
From the PowerPC ELFv2 ABI section 4.2.3. Global Offset Table.
```
The GOT consists of an 8-byte header that contains the TOC base (the first TOC
base when multiple TOCs are present), followed by an array of 8-byte addresses.
```
Due to the introduction of PC Relative code it is now possible to require a GOT
without having a .TOC. symbol in the object that is being linked. Since LLD uses
the .TOC. symbol to determine whether or not a GOT is required the GOT header is
not setup correctly and the 8-byte header is missing.
This patch allows the Power PC GOT setup to happen when an element is added to
the GOT instead of at the very begining. When this header is added a .TOC.
symbol is also added.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D91426
The functionality was originally added in {D95265}, but the test in that
diff only checked if `-ObjC` would cause bitcode containing ObjC class
symbols to be loaded. It neglected to test for bitcode containing
categories but no class symbols.
This diff also changes the lto-archive.ll test to use `-why_load`
instead of inspecting the output binary's symbol table. This is
motivated by the stacked diff {D99105}, which will hide irrelevant
bitcode symbols.
Reviewed By: #lld-macho, oontvoo
Differential Revision: https://reviews.llvm.org/D99215
Summary: We needed to use `Joined` instead of `Flag`. This wasn't caught
because the relevant test that was copied from LLD-ELF was still
invoking LLD-ELF instead of LLD-MachO...
Differential Revision: https://reviews.llvm.org/D99313
Pretty simple code-wise. Also threw in some refactoring:
* Put the functionStartSection under Writer instead of InStruct, since
it doesn't need to be accessed outside of Writer
* Adjusted the test to put all files under the temp dir instead of at
the top-level
* Added some CHECK-LABELs to make it clearer where the function starts
data is
Differential Revision: https://reviews.llvm.org/D99112
Don't run the 'tar' tool in a cleared environment with only the
LANG variable set, just set LANG on top of the existing environment.
If the 'tar' tool is an MSYS based tool, running it in a Windows
Container hangs if all environment variables are cleared - in
particular, the USERPROFILE variable needs to be kept intact.
This is the same issue fixed as was fixed in other places in
9de63b2e05, but contrary to running
the actual tests, running with an as-cleared-as-possible environment
here is less important.
Differential Revision: https://reviews.llvm.org/D99304
This patch renames the "Initial" member of WasmLimits to the name used
in the spec, "Minimum".
In the core WebAssembly specification, the Limits data type has one
required "min" member and one optional "max" member, indicating the
minimum required size of the corresponding table or memory, and the
maximum size, if any.
Although the WebAssembly spec does instantiate locally-defined tables
and memories with the initial size being equal to the minimum size, it
can't impose such a requirement for imports. It doesn't make sense to
require an initial size for a memory import, for example. The compiler
can only sensibly express the minimum and maximum sizes.
See
https://github.com/WebAssembly/js-types/blob/master/proposals/js-types/Overview.md#naming-of-size-limits
for a related discussion that agrees that the right name of "initial" is
"minimum" when querying the type of a table or memory from JavaScript.
(Of course it still makes sense for JS to speak in terms of an initial
size when it explicitly instantiates memories and tables.)
Differential Revision: https://reviews.llvm.org/D99186
This reverts commit 4876ba5b2d.
Third-attemp relanding D98559, new change:
- explicitly cast enum to underlying type to avoid ambiguity (workaround to clang's bug).
This reverts commit 3c21166a94.
The build is broken (clang-8 host compiler):
lld/MachO/DriverUtils.cpp:271:8: error: use of overloaded operator '<<' is ambiguous (with operand types 'llvm::raw_fd_ostream' and 'lld::macho::DependencyTracker::DepOpCode')
os << opcode;
~~ ^ ~~~~~~
This reverts commit 9670d2e4af.
Second attemp to reland D98559. New changes:
- inline functions removed from cpp file.
- updated tests to use CHECK-DAG instead of CHECK-NEXT
- fixed ambiguous "<<" operator by switching `char` to uint8_t
The only known reason why ICF should not merge otherwise identical
sections with differing associated sections has to do with exception
handling tables. It's not clear what ICF should do when there are other
kinds of associated sections. In every other case when this has come up,
debug info and CF guard metadata, we have opted to make ICF ignore the
associated sections.
For comparison, ELF doesn't do anything for comdat groups. Instead,
.eh_frame is parsed to figure out if a section has an LSDA, and if so,
ICF is disabled.
Another issue is that the order of associated sections is not defined.
We have had issues in the past (crbug.com/1144476) where changing the
order of the .xdata/.pdata sections in the object file lead to large ICF
slowdowns.
To address these issues, I decided it would be best to explicitly
consider only .pdata and .xdata sections during ICF. This makes it easy
to ignore the object file order, and I think it makes the intention of
the code clearer.
I've also made the children() accessor return an empty list for
associated sections. This mostly only affects ICF and GC. This was the
behavior before I made this a linked list, so the behavior change should
be good. This had positive effects on chrome.dll: more .xdata sections
were merged that previously could not be merged because they were
associated with distinct .pdata sections.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D98993
This reverts commit 2554b95db5.
Relanding [lld-macho] Implement -dependency_info (D98559) with changes:
- inline functions removed from cpp file.
- updated tests to not check libSystem.tbd with other input files (because of possible indeterministic ordering)
There is a bug when initial exec is relaxed to local exec.
In the following situation:
InitExec.c
```
extern __thread unsigned TGlobal;
unsigned getConst(unsigned*);
unsigned addVal(unsigned, unsigned*);
unsigned GetAddrT() {
return addVal(getConst(&TGlobal), &TGlobal);
}
```
Def.c
```
__thread unsigned TGlobal;
unsigned getConst(unsigned* A) {
return *A + 3;
}
unsigned addVal(unsigned A, unsigned* B) {
return A + *B;
}
```
The problem is in InitExec.c but Def.c is required if you want to link the example and see the problem.
To compile everything:
```
clang -O3 -mcpu=pwr10 -c InitExec.c
clang -O3 -mcpu=pwr10 -c Def.c
ld.lld InitExec.o Def.o -o IeToLe
```
If you objdump the problem object file:
```
$ llvm-objdump -dr --mcpu=pwr10 InitExec.o
```
you will get the following assembly:
```
0000000000000000 <GetAddrT>:
0: a6 02 08 7c mflr 0
4: f0 ff c1 fb std 30, -16(1)
8: 10 00 01 f8 std 0, 16(1)
c: d1 ff 21 f8 stdu 1, -48(1)
10: 00 00 10 04 00 00 60 e4 pld 3, 0(0), 1
0000000000000010: R_PPC64_GOT_TPREL_PCREL34 TGlobal
18: 14 6a c3 7f add 30, 3, 13
0000000000000019: R_PPC64_TLS TGlobal
1c: 78 f3 c3 7f mr 3, 30
20: 01 00 00 48 bl 0x20
0000000000000020: R_PPC64_REL24_NOTOC getConst
24: 78 f3 c4 7f mr 4, 30
28: 30 00 21 38 addi 1, 1, 48
2c: 10 00 01 e8 ld 0, 16(1)
30: f0 ff c1 eb ld 30, -16(1)
34: a6 03 08 7c mtlr 0
38: 00 00 00 48 b 0x38
0000000000000038: R_PPC64_REL24_NOTOC addVal
```
The lines of interest are:
```
10: 00 00 10 04 00 00 60 e4 pld 3, 0(0), 1
0000000000000010: R_PPC64_GOT_TPREL_PCREL34 TGlobal
18: 14 6a c3 7f add 30, 3, 13
0000000000000019: R_PPC64_TLS TGlobal
1c: 78 f3 c3 7f mr 3, 30
```
Which once linked gets turned into:
```
10010210: ff ff 03 06 00 90 6d 38 paddi 3, 13, -28672, 0
10010218: 00 00 00 60 nop
1001021c: 78 f3 c3 7f mr 3, 30
```
The problem is that register 30 is never set after the optimization.
Therefore it is not correct to relax the above instructions by replacing
the add instruction with a nop.
Instead the add instruction should be replaced with a copy (mr) instruction.
If the add uses the same resgiter as input and as ouput then it is safe to
continue to replace the add with a nop.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D95262
This reverts commit c53a1322f3.
Test only passes depending on build dir having a lexicographically later name
than the source dir, and doesn't link on mac/win. See
https://reviews.llvm.org/D98559#2640265 onward.
Alex Orlov