If content sections have lower alignment than zero-fill sections then bump the
overall segment alignment to avoid under-aligning the zero-fill sections.
llvm-svn: 370072
(-X) * (-Y) + Z --> X * Y + Z
This is a missing optimization that shows up as a potential regression in D66050,
so we should solve it first. We appear to be partly missing this fold in IR as well.
We do handle the simpler case already:
(-X) * (-Y) --> X * Y
And it might be beneficial to make the constraint less conservative (eg, if both
operands are cheap, but not necessarily cheaper), but that causes infinite looping
for the existing fmul transform.
Differential Revision: https://reviews.llvm.org/D66755
llvm-svn: 370071
Summary:
Adds support for emitting common local global symbols to an XCOFF object file.
Local commons are emitted into the .bss section with a storage class of
C_HIDEXT.
Patch by: daltenty
Reviewers: sfertile, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D66097
llvm-svn: 370070
This reverts commit b3d258fc44.
@skatkov is reporting crash in D63972#1646303
Contacted @ZhangKang, and revert the commit on behalf of him.
llvm-svn: 370069
Main difference is in the way Hi for Long shift (HiL) is made.
G_LSHR fills HiL with zeros, while G_ASHR fills HiL with sign bit value.
Differential Revision: https://reviews.llvm.org/D66589
llvm-svn: 370064
Fix typos. Use Hi and Lo prefixes for Or instead of LHS and RHS
to match names of surrounding variables.
Differential Revision: https://reviews.llvm.org/D66587
llvm-svn: 370062
Summary:
This patch adds support for scalable vectors in intrinsics, enabling
intrinsics such as the following to be defined:
declare <vscale x 4 x i32> @llvm.something.nxv4i32(<vscale x 4 x i32>)
Support for this is implemented by defining a new type descriptor for
scalable vectors and adding mangling support for scalable vector types
in the name mangling scheme used by 'any' types in intrinsic signatures.
Tests have been added for IRBuilder to test scalable vectors work as
expected when using intrinsics through this interface. This required
implementing an intrinsic that is explicitly defined with scalable
vectors, e.g. LLVMType<nxv4i32>, an SVE floating-point convert
intrinsic was used for this. The behaviour of the overloaded type
LLVMScalarOrSameVectorWidth with scalable vectors is tested using the
existing masked load intrinsic. Also added an .ll test to test the
Verifier catches a bad intrinsic argument when passing a fixed-width
predicate (mask) to the masked.load intrinsic where a scalable is
expected.
Patch by Paul Walker
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D65930
llvm-svn: 370053
Summary:
This is motivated by D63591, where we realized that there isn't a really
good way of telling whether a DataExtractor is reading actual data, or
is it just returning default values because it reached the end of the
buffer.
This patch resolves that by providing a new "Cursor" class. A Cursor
object encapsulates two things:
- the current position/offset in the DataExtractor
- an error object
Storing the error object inside the Cursor enables one to use the same
pattern as the std::{io}stream API, where one can blindly perform a
sequence of reads and only check for errors once at the end of the
operation. Similarly to the stream API, as soon as we encounter one
error, all of the subsequent operations are skipped (return default
values) too, even if the would suceed with clear error state. Unlike the
std::stream API (but in line with other llvm APIs), we force the error
state to be checked through usage of llvm::Error.
Reviewers: probinson, dblaikie, JDevlieghere, aprantl, echristo
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63713
llvm-svn: 370042
Inserting a value into Visited has the effect of terminating a search for
predecessors if that node is seen. This is legitimate for the base address, and
acts as a slight performance optimization, but the vector-building node can be
paert of a legitimate cycle so we shouldn't stop searching there.
PR43056.
llvm-svn: 370036
There is a problem with reportError we have.
Declaration says we have ArchiveName
that follows the FileName:
reportError(Error E, StringRef FileName, StringRef ArchiveName,...
Though implementation have them reversed. I cleaned it up and
removed an excessive reportError(Error E, StringRef File) version.
Rebased on top of D66418.
Differential revision: https://reviews.llvm.org/D66517
llvm-svn: 370034
This is a follow up discussed in the comments of D66583.
Currently, if for example, we have both StOther and Other set in YAML document for a symbol,
then yaml2obj reports an "unknown key 'Other'" error.
It happens because 'mapOptional()' is never called for 'Other/Visibility' in this case,
leaving those unhandled.
This message does not describe the reason of the error well. This patch fixes it.
Differential revision: https://reviews.llvm.org/D66642
llvm-svn: 370032
ConstantDataVector is a specialized verison of ConstantVector
that stores data in a packed array of bits instead of as
individual pointers to other Constants. But we really shouldn't
expose that if we can void it. And we should handle regular
ConstantVector equally well.
This removes a dyn_cast to ConstantDataVector and just calls
getSplatValue directly on a Constant* if the type is a vector.
llvm-svn: 370018
Summary:
Similar to `^=` operator for IntegerState, this patch introduces a `+=` operator to "clamp" known information.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66635
llvm-svn: 370015
Summary:
During the fixpoint iteration, including the manifest stage, we should
not delete stuff as other abstract attributes might have a reference to
the value. Through the API this can now be done safely at the very end.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66779
llvm-svn: 370014
This change causes instrumented builds of Clang to have a fatal error in the
backend. https://reviews.llvm.org/D66537 has the details.
llvm-svn: 370006
Summary:
This is an alternate approach to D63396
Currently funclets reuse the same stack slots that are used in the
parent function for saving callee-saved xmm registers. If the parent
function modifies a callee-saved xmm register before an excpetion is
thrown, the catch handler will overwrite the original saved value.
This patch allocates space in funclets stack for saving callee-saved xmm
registers and uses RSP instead RBP to access memory.
Signed-off-by: Pengfei Wang <pengfei.wang@intel.com>
Reviewers: rnk, RKSimon, craig.topper, annita.zhang, LuoYuanke, andrew.w.kaylor
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66596
Signed-off-by: Pengfei Wang <pengfei.wang@intel.com>
llvm-svn: 370005
We previously called getSplatValue if the index had a vector type,
but getSplatValue returns null for non-splats. This would cause
a nullptr dereference if it wasn't a splat.
Using getUniqueInteger gives us an assert if its a vector type,
but the value isn't a splat. This is what is used in
SelectionDAGBuilder's code that expands GEPs as well.
llvm-svn: 370001
The problem these are supposed to work around can occur before the
intrinsics are lowered into the nodes. Try to directly simplify them
so they are matched before the bit assert operations can be optimized
out.
llvm-svn: 369994
The mul24 matching could interfere with SLSR and the other addressing
mode related passes. This probably is not the optimal placement, but
is an intermediate step. This should probably be moved after all the
generic IR passes, particularly LSR. Moving this after LSR seems to
help in some cases, and hurts others.
As-is in this patch, in idiv-licm, it saves 1-2 instructions inside
some of the loop bodies, but increases the number in others. Moving
this later helps these loops. In the new lsr tests in
mul24-pass-ordering, the intrinsic prevents introducing more
instructions in the loop preheader, so moving this later ends up
hurting them. This shouldn't be any worse than before the intrinsics
were introduced in r366094, and LSR should probably be smarter. I
think it's because it doesn't know the and inside the loop will be
folded away.
llvm-svn: 369991
Probably better to keep add over sub in early DAG combines.
It might make sense to push this to lowering or delay it all
the way to isel. But this was the simplest change.
llvm-svn: 369981
Summary:
Previously we skipped uses within the same BB as a def when rebuilding
SSA after SjLj transformation. For example, before transformation,
```
for.cond:
%0 = phi i32 [ %var, %for.inc ] ...
%var = ...
br label %for.inc
for.inc: ; preds = %for.cond
call i32 @setjmp(...)
br %for.cond
```
In this BB, %var should be defined in all paths from %for.inc to make %0
valid. In the input it was true; %for.inc's only predecessor was
%for.cond. But after SjLj transformation, it is possible that %for.inc
has other predecessors that are reachable without reaching %for.cond.
```
entry.split:
...
br i1 %a, label %bb.1, label %for.inc
for.cond:
%0 = phi i32 [ %var, %for.inc ] ... ; Not valid!
%var = ...
br label %for.inc
for.inc: ; preds = %for.cond, %entry.split
call i32 @setjmp(...)
...
br %for.cond
```
In this case, we can't use %var in the `phi` instruction in %for.cond,
because %var is not defined in all paths through %for.inc (If the
control flow is %entry -> %entry.split -> %for.inc -> %for.cond, %var
has not been defined until we reach the `phi`). But the previous code
excluded users within the same BB, skipping instructions within the same
BB so they are not rewritten properly. User instructions within the same
BB also should be candidates for rewriting if they are _before_ the
original definition.
Fixes PR43097.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66729
llvm-svn: 369978
Try harder to emulate "old runtime" in the test.
To get the old behavior with the new runtime library, we need both
disable personality function wrapping and enable landing pad
instrumentation.
llvm-svn: 369977
In r369808 the failure scheme for ORC symbols was changed to make
MaterializationResponsibility objects responsible for failing the symbols
they represented. This simplifies error logic in the case where symbols are
still covered by a MaterializationResponsibility, but left a gap in error
handling: Symbols that have been emitted but are not yet ready (due to a
dependence on some unemitted symbol) are not covered by a
MaterializationResponsibility object. Under the scheme introduced in r369808
such symbols would be moved to the error state, but queries on those symbols
were never notified. This led to deadlocks when such symbols were failed.
This commit updates error logic to immediately fail queries on any symbol that
has already been emitted if one of its dependencies fails.
llvm-svn: 369976
Symbols that have not been queried will not have MaterializingInfo entries,
so remove the assert that all failed symbols should have these entries.
Also updates the loop to only remove entries that were found earlier.
llvm-svn: 369975
Summary:
Combine a test in lower-em-sjlj-longjmp-only.ll into lower-em-sjlj.ll,
because the test command is the same and I don't see any reason it
should be a separate file. Also converted tabs into spaces and fixed
indentations in lower-em-sjlj-sret.ll. (lower-em-sjlj.ll uses a
different test command (llc), so it couldn't be combined)
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66728
llvm-svn: 369974
This teaches the importer to handle INSERT_SUBREG instructions.
We were missing patterns involving INSERT_SUBREG in AArch64. It appears in
AArch64InstrInfo.td 107 times, and 14 times in AArch64InstrFormats.td.
To meaningfully import it, the GlobalISelEmitter needs to know how to infer a
super register class for a given register class.
This patch introduces the following:
- `getSuperRegForSubReg`, a function which finds the largest register class
which supports a value type and subregister index
- `inferSuperRegisterClass`, a function which finds the appropriate super
register class for an INSERT_SUBREG'
- `inferRegClassFromPattern`, a function which allows for some trivial
lookthrough into instructions
- `getRegClassFromLeaf`, a helper function which returns the register class for
a leaf `TreePatternNode`
- Support for subregister index operands in `importExplicitUseRenderer`
It also
- Updates tests in each backend which are impacted by the change
- Adds GlobalISelEmitterSubreg.td to test that we import and skip the expected
patterns
As a result of this patch, INSERT_SUBREG patterns in X86 may use the
LOW32_ADDR_ACCESS_RBP register class instead of GR32. This is correct, since the
register class contains the same registers as GR32 (except with the addition of
RBP). So, this also teaches X86 to handle that register class. This is in line
with X86ISelLowering, which treats this as a GR class.
Differential Revision: https://reviews.llvm.org/D66498
llvm-svn: 369973
This implements the DWARF 5 feature described in:
http://dwarfstd.org/ShowIssue.php?issue=141212.1
To support recognizing anonymous structs:
struct A {
struct { // Anonymous struct
int y;
};
} a
This patch adds support for the new flag in constructTypeDIE(...) and test to verify this change.
Differential Revision: https://reviews.llvm.org/D66605
llvm-svn: 369969
This should let us get rid of StringLiteral in the long term and avoid
chasing accidental StringRef globals once and for all.
This requires C++14, I godbolted it on every compiler I know we support
so I hope there won't be much fallout.
llvm-svn: 369961
Lang Hames