Following r363007, which reverted r362998, r362996, and r362994,
reapply with adjustments for the CRLF differences encountered with
Windows. Namely, the `-b` option of `diff` is employed, and the `grep`
patterns have `$` replaced with `[[:space:]]*$`.
llvm-svn: 363069
Reverts r362998, r362996, and r362994 because the tests do not pass on
Windows due to CRLF changes. Adding back `-w` to diff is not enough, the
new grep substitution doesn't work on Windows, and fixing it is
non-trivial.
llvm-svn: 363007
Summary:
The `%diff_plist` lit substitution invokes `diff` with a non-portable
`-I` option. The intended effect can be achieved by normalizing the
inputs to `diff` beforehand. Such normalization can be done with
`grep -Ev`, which is also used by other tests.
This patch applies the change (adjusted for review comments) described
in http://lists.llvm.org/pipermail/cfe-dev/2019-April/061904.html
mechanically to the cases where the output file is piped to
`%diff_plist` via `cat`.
The changes were applied via a script, except that
`clang/test/Analysis/NewDelete-path-notes.cpp` and
`clang/test/Analysis/plist-macros-with-expansion.cpp` were each adjusted
for the line-continuation on the relevant `RUN` step.
Reviewers: NoQ, sfertile, xingxue, jasonliu, daltenty
Subscribers: xazax.hun, baloghadamsoftware, szepet, a.sidorin, mikhail.ramalho, Szelethus, donat.nagy, dkrupp, Charusso, jsji, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D62950
llvm-svn: 362996
The current argument order has "expected" and "actual" the wrong way around,
so that the diff shows the change from expected to actual, not from actual to expected.
Namely, if the expected diagnostics contains the string "foo", but the analyzer emits "bar",
we really want to see:
```
- foo
+ bar
```
not
```
- bar
+ foo
```
since adapting to most changes would require applying that diff to the expected output.
Differential Revision: https://reviews.llvm.org/D56340
llvm-svn: 350866
This patch defines a new substitution and uses it to reduce
duplication in the Clang Analyzer test cases.
Differential Revision: https://reviews.llvm.org/D52036
llvm-svn: 342365
Rename AlternateExtensive to Extensive.
In 2013, five years ago, we have switched to AlternateExtensive
diagnostics by default, and Extensive was available under unused,
undocumented flag.
This change remove the flag, renames the Alternate
diagnostic to Extensive (as it's no longer Alternate), and ports the
test.
Differential Revision: https://reviews.llvm.org/D47670
llvm-svn: 334524
The more detailed diagnostic will make identifying which object the
diagnostics refer to easier.
Differential Revision: https://reviews.llvm.org/D27740
llvm-svn: 289883
This patch adds hashes to the plist and html output to be able to identfy bugs
for suppressing false positives or diff results against a baseline. This hash
aims to be resilient for code evolution and is usable to identify bugs in two
different snapshots of the same software. One missing piece however is a
permanent unique identifier of the checker that produces the warning. Once that
issue is resolved, the hashes generated are going to change. Until that point
this feature is marked experimental, but it is suitable for early adoption.
Differential Revision: http://reviews.llvm.org/D10305
Original patch by: Bence Babati!
llvm-svn: 251011
to the plist output. This check_name field does not guaranteed to be the
same as the name of the checker in the future.
Reviewer: Anna Zaks
Differential Revision: http://reviews.llvm.org/D6841
llvm-svn: 228624
...but don't yet migrate over the existing plist tests. Some of these
would be trivial to migrate; others could use a bit of inspection first.
In any case, though, the new edge algorithm seems to have proven itself,
and we'd like more coverage (and more usage) of it going forwards.
llvm-svn: 183165
Neither the compiler nor the analyzer are doing anything with non-VarDecl
decls in the CFG, and having them there creates extra nodes in the
analyzer's path diagnostics. Simplify the CFG (and the path edges) by
simply leaving them out. We can always add interesting decls back in when
they become relevant.
Note that this only affects decls declared in a DeclStmt, and then only
those that appear within a function body.
llvm-svn: 183157
The uniqueing location is the location which is part of the hash used to determine if two reports are
the same. This is used by the CmpRuns.py script to compare two analyzer runs and determine which
warnings are new.
llvm-svn: 180166
The 2 functions were computing the same location using different logic (each one had edge case bugs that the other
one did not). Refactor them to rely on the same logic.
The location of the warning reported in text/command line output format will now match that of the plist file.
There is one change in the plist output as well. When reporting an error on a BinaryOperator, we use the location of the
operator instead of the beginning of the BinaryOperator expression. This matches our output on command line and
looks better in most cases.
llvm-svn: 180165
Fixes PR15358 and <rdar://problem/13295437>.
Along the way, shorten path diagnostics that say "Variable 'x'" to just
be "'x'". By the context, it is obvious that we have a variable,
and so this just consumes text space.
llvm-svn: 176115
This required more changes than I originally expected:
- ObjCIvarRegion implements "canPrintPretty" et al
- DereferenceChecker indicates the null pointer source is an ivar
- bugreporter::trackNullOrUndefValue() uses an alternate algorithm
to compute the location region to track by scouring the ExplodedGraph.
This allows us to get the actual MemRegion for variables, ivars,
fields, etc. We only hand construct a VarRegion for C++ references.
- ExplodedGraph no longer drops nodes for expressions that are marked
'lvalue'. This is to facilitate the logic in the previous bullet.
This may lead to a slight increase in size in the ExplodedGraph,
which I have not measured, but it is likely not to be a big deal.
I have validated each of the changed plist output.
Fixes <rdar://problem/12114812>
llvm-svn: 175988
This fixes a few cases where we'd emit path notes like this:
+---+
1| v
p = malloc(len);
^ |2
+---+
In general this should make path notes more consistent and more correct,
especially in cases where the leak happens on the false branch of an if
that jumps directly to the end of the function. There are a couple places
where the leak is reported farther away from the cause; these are usually
cases where there are several levels of nested braces before the end of
the function. This still matches our current behavior for when there /is/
a statement after all the braces, though.
llvm-svn: 168070
This allows us to properly remove dead bindings at the end of the top-level
stack frame, using the ReturnStmt, if there is one, to keep the return value
live. This in turn removes the need for a check::EndPath callback in leak
checkers.
This does cause some changes in the path notes for leak checkers. Previously,
a leak would be reported at the location of the closing brace in a function.
Now, it gets reported at the last statement. This matches the way leaks are
currently reported for inlined functions, but is less than ideal for both.
llvm-svn: 168066
path notes for cases where a value may be assumed to be null, etc.
Instead of having redundant diagnostics, do a pass over the generated
PathDiagnostic pieces and remove notes from TrackConstraintBRVisitor
that are already covered by ConditionBRVisitor, whose notes tend
to be better.
Fixes <rdar://problem/12252783>
llvm-svn: 166728
CmpRuns.py can be used to compare issues from different analyzer runs.
Since it uses the issue line number to unique 2 issues, adding a new
line to the beginning of a file makes all issues in the file reported as
new.
The hash will be an opaque value which could be used (along with the
function name) by CmpRuns to identify the same issues. This way, we only
fail to identify the same issue from two runs if the function it appears
in changes (not perfect, but much better than nothing).
llvm-svn: 158180
we use the same Expr* as the one being currently visited. This is preparation for transitioning to having
ProgramPoints refer to CFGStmts.
This required a bit of trickery. We wish to keep the old Expr* bindings in the Environment intact,
as plenty of logic relies on it and there is no reason to change it, but we sometimes want the Stmt* for
the ProgramPoint to be different than the Expr* being used for bindings. This requires adding an extra
argument for some functions (e.g., evalLocation). This looks a bit strange for some clients, but
it will look a lot cleaner when were start using CFGStmt* in the appropriate places.
As some fallout, the diagnostics arrows are a bit difference, since some of the node locations have changed.
I have audited these, and they look reasonable.
llvm-svn: 154214
Essentially, a bug centers around a story for various symbols and regions. We should only include
the path diagnostic events that relate to those symbols and regions.
The pruning is done by associating a set of interesting symbols and regions with a BugReporter, which
can be modified at BugReport creation or by BugReporterVisitors.
This patch reduces the diagnostics emitted in several of our test cases. I've vetted these as
having desired behavior. The only regression is a missing null check diagnostic for the return
value of realloc() in test/Analysis/malloc-plist.c. This will require some investigation to fix,
and I have added a FIXME to the test case.
llvm-svn: 152361
- Get rid of PathDiagnosticLocation(SourceRange r,..) constructor by providing a bunch of create methods.
- The PathDiagnosticLocation(SourceLocation L,..), which is used by crate methods, will eventually become private.
- Test difference is in the case when the report starts at the beginning of the function. We used to represent that point as a range of the very first token in the first statement. Now, it's just a single location representing the first character of the first statement.
llvm-svn: 139932
- The closing brace is always a single location, not a range.
- The test case previously had a location key 57:1 followed by a range [57:1 - 57:1].
llvm-svn: 139832
- It adds LocationContext to the PathDiagnosticLocation object and uses it to lookup the enclosing statement with a valid location.
- So far, the LocationContext is only available when the object is constructed from the ExplodedNode.
- Already found some subtle bugs(in plist-output-alternate.m) where the intermediate diagnostic steps were not previously shown.
llvm-svn: 139703
Remove TransferFuncs from ExprEngine and AnalysisConsumer.
Demote RetainReleaseChecker to a regular checker, and give it the name osx.cocoa.RetainCount (class name change coming shortly). Update tests accordingly.
llvm-svn: 138998
Hubert Tong