Command line option injected by tablegen rule cannot be respected by
PDLL here, so add new helper function that is copy of original without
any additional flags injected. This avoids compilation failure when
compiler warnings are disabled.
Kept it as a mechanical copy.
Fixes#55716
First of all, `LLVM_TOOLS_INSTALL_DIR` put there breaks our NixOS
builds, because `LLVM_TOOLS_INSTALL_DIR` defined the same as
`CMAKE_INSTALL_BINDIR` becomes an *absolute* path, and then when
downstream projects try to install there too this breaks because our
builds always install to fresh directories for isolation's sake.
Second of all, note that `LLVM_TOOLS_INSTALL_DIR` stands out against the
other specially crafted `LLVM_CONFIG_*` variables substituted in
`llvm/cmake/modules/LLVMConfig.cmake.in`.
@beanz added it in d0e1c2a550 to fix a
dangling reference in `AddLLVM`, but I am suspicious of how this
variable doesn't follow the pattern.
Those other ones are carefully made to be build-time vs install-time
variables depending on which `LLVMConfig.cmake` is being generated, are
carefully made relative as appropriate, etc. etc. For my NixOS use-case
they are also fine because they are never used as downstream install
variables, only for reading not writing.
To avoid the problems I face, and restore symmetry, I deleted the
exported and arranged to have many `${project}_TOOLS_INSTALL_DIR`s.
`AddLLVM` now instead expects each project to define its own, and they
do so based on `CMAKE_INSTALL_BINDIR`. `LLVMConfig` still exports
`LLVM_TOOLS_BINARY_DIR` which is the location for the tools defined in
the usual way, matching the other remaining exported variables.
For the `AddLLVM` changes, I tried to copy the existing pattern of
internal vs non-internal or for LLVM vs for downstream function/macro
names, but it would good to confirm I did that correctly.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D117977
This provides a format for externally specifying the include directories
for a source file. The format of the tablegen database is exactly the
same as that for PDLL, namely it includes the absolute source file name and
the set of include directories. The database format is shared to simplify
the infra, and also because the format itself is general enough to share. Even
if we desire to expand in the future to contain the actual compilation command,
nothing there is specific enough that we would need two different formats.
As with PDLL, support for generating the database is added to our mlir_tablegen
cmake command.
Differential Revision: https://reviews.llvm.org/D125441
The compilation database acts in a similar way to the compilation database
(compile_commands.json) used by clang-tidy, i.e. it provides additional
information about the compilation of project files to help the language
server. The main piece of information provided by the PDLL compilation
database in this commit is the set of include directories used when processing
the input .pdll file. This allows for the server to properly process .pdll files
that use includes anchored by the include directories set up in the build system.
The structure of the textual form of a compilation database is a yaml file
containing documents of the following form:
```
--- !FileInfo:
filepath: <string> - Absolute file path of the file.
includes: <string> - Semi-colon delimited list of include directories.
```
This commit also adds support to cmake for automatically generating
a `pdll_compile_commands.yml` file at the top-level of the build
directory.
Differential Revision: https://reviews.llvm.org/D124076
This essentially sets up mlir-pdll to function in a similar manner to mlir-tblgen. Aside
from the boilerplate of configuring CMake and setting up a basic initial test, two new
options are added to mlir-pdll to mirror options provided by tblgen:
* -d
This option generates a dependency file (i.e. a set of build time dependencies) while
processing the input file.
* --write-if-changed
This option only writes to the output file if the data would have changed, which for
the build system prevents unnecesarry rebuilds if the file was touched but not actually
changed.
Differential Revision: https://reviews.llvm.org/D124075
This is present since the beginning, but does not seem needed by any
in-tree target right now. This seems like the kind of thing to populate
by the caller if needed.
Differential Revision: https://reviews.llvm.org/D121565
This is the original patch in my GNUInstallDirs series, now last to merge as the final piece!
It arose as a new draft of D28234. I initially did the unorthodox thing of pushing to that when I wasn't the original author, but since I ended up
- Using `GNUInstallDirs`, rather than mimicking it, as the original author was hesitant to do but others requested.
- Converting all the packages, not just LLVM, effecting many more projects than LLVM itself.
I figured it was time to make a new revision.
I have used this patch series (and many back-ports) as the basis of https://github.com/NixOS/nixpkgs/pull/111487 for my distro (NixOS), which was merged last spring (2021). It looked like people were generally on board in D28234, but I make note of this here in case extra motivation is useful.
---
As pointed out in the original issue, a central tension is that LLVM already has some partial support for these sorts of things. Variables like `COMPILER_RT_INSTALL_PATH` have already been dealt with. Variables like `LLVM_LIBDIR_SUFFIX` however, will require further work, so that we may use `CMAKE_INSTALL_LIBDIR`.
These remaining items will be addressed in further patches. What is here is now rote and so we should get it out of the way before dealing more intricately with the remainder.
Reviewed By: #libunwind, #libc, #libc_abi, compnerd
Differential Revision: https://reviews.llvm.org/D99484
This is the original patch in my GNUInstallDirs series, now last to merge as the final piece!
It arose as a new draft of D28234. I initially did the unorthodox thing of pushing to that when I wasn't the original author, but since I ended up
- Using `GNUInstallDirs`, rather than mimicking it, as the original author was hesitant to do but others requested.
- Converting all the packages, not just LLVM, effecting many more projects than LLVM itself.
I figured it was time to make a new revision.
I have used this patch series (and many back-ports) as the basis of https://github.com/NixOS/nixpkgs/pull/111487 for my distro (NixOS), which was merged last spring (2021). It looked like people were generally on board in D28234, but I make note of this here in case extra motivation is useful.
---
As pointed out in the original issue, a central tension is that LLVM already has some partial support for these sorts of things. Variables like `COMPILER_RT_INSTALL_PATH` have already been dealt with. Variables like `LLVM_LIBDIR_SUFFIX` however, will require further work, so that we may use `CMAKE_INSTALL_LIBDIR`.
These remaining items will be addressed in further patches. What is here is now rote and so we should get it out of the way before dealing more intricately with the remainder.
Reviewed By: #libunwind, #libc, #libc_abi, compnerd
Differential Revision: https://reviews.llvm.org/D99484
* Incorporates a reworked version of D106419 (which I have closed but has comments on it).
* Extends the standalone example to include a minimal CAPI (for registering its dialect) and a test which, from out of tree, creates an aggregate dylib and links a little sample program against it. This will likely only work today in *static* MLIR builds (until the TypeID fiasco is finally put to bed). It should work on all platforms, though (including Windows - albeit I haven't tried this exact incarnation there).
* This is the biggest pre-requisite to being able to build out of tree MLIR Python-based projects from an installed MLIR/LLVM.
* I am rather nauseated by the CMake shenanigans I had to endure to get this working. The primary complexity, above and beyond the previous patch is because (with no reason given), it is impossible to export target properties that contain generator expressions... because, of course it isn't. In this case, the primary reason we use generator expressions on the individual embedded libraries is to support arbitrary ordering. Since that need doesn't apply to out of tree (which import everything via FindPackage at the outset), we fall back to a more imperative way of doing the same thing if we detect that the target was imported. Gross, but I don't expect it to need a lot of maintenance.
* There should be a relatively straight-forward path from here to rebase libMLIR.so on top of this facility and also make it include the CAPI.
Differential Revision: https://reviews.llvm.org/D111504
* Implements all of the discussed features:
- Links against common CAPI libraries that are self contained.
- Stops using the 'python/' directory at the root for everything, opening the namespace up for multiple projects to embed the MLIR python API.
- Separates declaration of sources (py and C++) needed to build the extension from building, allowing external projects to build custom assemblies from core parts of the API.
- Makes the core python API relocatable (i.e. it could be embedded as something like 'npcomp.ir', 'npcomp.dialects', etc). Still a bit more to do to make it truly isolated but the main structural reset is done.
- When building statically, installed python packages are completely self contained, suitable for direct setup and upload to PyPi, et al.
- Lets external projects assemble their own CAPI common runtime library that all extensions use. No more possibilities for TypeID issues.
- Begins modularizing the API so that external projects that just include a piece pay only for what they use.
* I also rolled in a re-organization of the native libraries that matches how I was packaging these out of tree and is a better layering (i.e. all libraries go into a nested _mlir_libs package). There is some further cleanup that I resisted since it would have required source changes that I'd rather do in a followup once everything stabilizes.
* Note that I made a somewhat odd choice in choosing to recompile all extensions for each project they are included into (as opposed to compiling once and just linking). While not leveraged yet, this will let us set definitions controlling the namespacing of the extensions so that they can be made to not conflict across projects (with preprocessor definitions).
* This will be a relatively substantial breaking change for downstreams. I will handle the npcomp migration and will coordinate with the circt folks before landing. We should stage this and make sure it isn't causing problems before landing.
* Fixed a couple of absolute imports that were causing issues.
Differential Revision: https://reviews.llvm.org/D106520
libMLIRPublicAPI.so came into existence early when the Python and C-API were being co-developed because the Python extensions need a single DSO which exports the C-API to link against. It really should never have been exported as a mondo library in the first place, which has caused no end of problems in different linking modes, etc (i.e. the CAPI tests depended on it).
This patch does a mechanical move that:
* Makes the C-API tests link directly to their respective libraries.
* Creates a libMLIRPythonCAPI as part of the Python bindings which assemble to exact DSO that they need.
This has the effect that the C-API is no longer monolithic and can be subset and used piecemeal in a modular fashion, which is necessary for downstreams to only pay for what they use. There are additional, more fundamental changes planned for how the Python API is assembled which should make it more out of tree friendly, but this minimal first step is necessary to break the fragile dependency between the C-API and Python API.
Downstream actions required:
* If using the C-API and linking against MLIRPublicAPI, you must instead link against its constituent components. As a reference, the Python API dependencies are in lib/Bindings/Python/CMakeLists.txt and approximate the full set of dependencies available.
* If you have a Python API project that was previously linking against MLIRPublicAPI (i.e. to add its own C-API DSO), you will want to `s/MLIRPublicAPI/MLIRPythonCAPI/` and all should be as it was. There are larger changes coming in this area but this part is incremental.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D106369
* Previously, we were only generating .h.inc files. We foresee the need to also generate implementations and this is a step towards that.
* Discussed in https://llvm.discourse.group/t/generating-cpp-inc-files-for-dialects/3732/2
* Deviates from the discussion above by generating a default constructor in the .cpp.inc file (and adding a tablegen bit that disables this in case if this is user provided).
* Generating the destructor started as a way to flush out the missing includes (produces a link error), but it is a strict improvement on its own that is worth doing (i.e. by emitting key methods in the .cpp file, we root vtables in one translation unit, which is a non-controversial improvement).
Differential Revision: https://reviews.llvm.org/D105070
LLVM's build system contains support for configuring a distribution, but
it can often be useful to be able to configure multiple distributions
(e.g. if you want separate distributions for the tools and the
libraries). Add this support to the build system, along with
documentation and usage examples.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D89177
This is useful for expressing specific table-gen options, like selecting
a particular dialect to print.
Use it to fix the documentation for the `pdl_interp` dialect which is now
generating the first dialect it finds in its input which is `pdl`.
Differential Revision: https://reviews.llvm.org/D100517
Add the necessary bits to CMakeLists to make it possible to configure
MLIR against installed LLVM, and build it with minimal need for LLVM
source tree. The latter is only necessary to run unittests, and if it
is missing then unittests are skipped with a warning.
This change includes the necessary changes to tests, in particular
adding some missing substitutions and defining missing variables
for lit.site.cfg.py substitution.
Reviewed By: stephenneuendorffer
Differential Revision: https://reviews.llvm.org/D85464
Co-authored-by: Isuru Fernando <isuruf@gmail.com>
We were discussing on discord regarding the need for extension-based systems like Python to dynamically link against MLIR (or else you can only have one extension that depends on it). Currently, when I set that up, I piggy-backed off of the flag that enables build libLLVM.so and libMLIR.so and depended on libMLIR.so from the python extension if shared library building was enabled. However, this is less than ideal.
In the current setup, libMLIR.so exports both all symbols from the C++ API and the C-API. The former is a kitchen sink and the latter is curated. We should be splitting them and for things that are properly factored to depend on the C-API, they should have the option to *only* depend on the C-API, and we should build that shared library no matter what. Its presence isn't just an optimization: it is a key part of the system.
To do this right, I needed to:
* Introduce visibility macros into mlir-c/Support.h. These should work on both *nix and windows as-is.
* Create a new libMLIRPublicAPI.so with just the mlir-c object files.
* Compile the C-API with -fvisibility=hidden.
* Conditionally depend on the libMLIR.so from libMLIRPublicAPI.so if building libMLIR.so (otherwise, also links against the static libs and will produce a mondo libMLIRPublicAPI.so).
* Disable re-exporting of static library symbols that come in as transitive deps.
This gives us a dynamic linked C-API layer that is minimal and should work as-is on all platforms. Since we don't support libMLIR.so building on Windows yet (and it is not very DLL friendly), this will fall back to a mondo build of libMLIRPublicAPI.so, which has its uses (it is also the most size conscious way to go if you happen to know exactly what you need).
Sizes (release/stripped, Ubuntu 20.04):
Shared library build:
libMLIRPublicAPI.so: 121Kb
_mlir.cpython-38-x86_64-linux-gnu.so: 1.4Mb
mlir-capi-ir-test: 135Kb
libMLIR.so: 21Mb
Static build:
libMLIRPublicAPI.so: 5.5Mb (since this is a "static" build, this includes the MLIR implementation as non-exported code).
_mlir.cpython-38-x86_64-linux-gnu.so: 1.4Mb
mlir-capi-ir-test: 44Kb
Things like npcomp and circt which bring their own dialects/transforms/etc would still need the shared library build and code that links against libMLIR.so (since it is all C++ interop stuff), but hopefully things that only depend on the public C-API can just have the one narrow dep.
I spot checked everything with nm, and it looks good in terms of what is exporting/importing from each layer.
I'm not in a hurry to land this, but if it is controversial, I'll probably split off the Support.h and API visibility macro changes, since we should set that pattern regardless.
Reviewed By: mehdi_amini, benvanik
Differential Revision: https://reviews.llvm.org/D90824
Adds a TypeDef class to OpBase and backing generation code. Allows one
to define the Type, its parameters, and printer/parser methods in ODS.
Can generate the Type C++ class, accessors, storage class, per-parameter
custom allocators (for the storage constructor), and documentation.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D86904
This reverts commit e9b87f43bd.
There are issues with macros generating macros without an obvious simple fix
so I'm going to revert this and try something different.
New projects (particularly out of tree) have a tendency to hijack the existing
llvm configuration options and build targets (add_llvm_library,
add_llvm_tool). This can lead to some confusion.
1) When querying a configuration variable, do we care about how LLVM was
configured, or how these options were configured for the out of tree project?
2) LLVM has lots of defaults, which are easy to miss
(e.g. LLVM_BUILD_TOOLS=ON). These options all need to be duplicated in the
CMakeLists.txt for the project.
In addition, with LLVM Incubators coming online, we need better ways for these
incubators to do things the "LLVM way" without alot of futzing. Ideally, this
would happen in a way that eases importing into the LLVM monorepo when
projects mature.
This patch creates some generic infrastructure in llvm/cmake/modules and
refactors MLIR to use this infrastructure. This should expand to include
add_xxx_library, which is by far the most complicated bit of building a
project correctly, since it has to deal with lots of shared library
configuration bits. (MLIR currently hijacks the LLVM infrastructure for
building libMLIR.so, so this needs to get refactored anyway.)
Differential Revision: https://reviews.llvm.org/D85140
This changes mlir_check_link_libraries() to work with interface libraries.
These don't have the LINK_LIBRARIES property.
Differential Revision: https://reviews.llvm.org/D85957
Summary: * This library is special because of its dependencies so seems to have been inadvertently left out of installs.
Reviewers: antiagainst
Subscribers: mgorny, mehdi_amini, rriddle, jpienaar, shauheen, antiagainst, nicolasvasilache, arpith-jacob, mgester, lucyrfox, aartbik, liufengdb, stephenneuendorffer, Joonsoo, grosul1, frgossen, Kayjukh, jurahul, msifontes
Tags: #mlir
Differential Revision: https://reviews.llvm.org/D81693
Using LLVM components in LINK_LIBS means that the mechanisms for
replacing component dependencies with libLLVM.so break. Try to catch
this incorrect usage up front, instead of waiting until later when we
get difficult to understand runtime errors from incorrectly linked
libraries.
Differential Revision: https://reviews.llvm.org/D80103
- Exports MLIR targets to be used out-of-tree.
- mimicks `add_clang_library` and `add_flang_library`.
- Fixes libMLIR.so
After https://reviews.llvm.org/D77515 libMLIR.so was no longer containing
any object files. We originally had a cludge there that made it work with
the static initalizers and when switchting away from that to the way the
clang shlib does it, I noticed that MLIR doesn't create a `obj.{name}` target,
and doesn't export it's targets to `lib/cmake/mlir`.
This is due to MLIR using `add_llvm_library` under the hood, which adds
the target to `llvmexports`.
Differential Revision: https://reviews.llvm.org/D78773
[MLIR] Fix libMLIR.so and LLVM_LINK_LLVM_DYLIB
Primarily, this patch moves all mlir references to LLVM libraries into
either LLVM_LINK_COMPONENTS or LINK_COMPONENTS. This enables magic in
the llvm cmake files to automatically replace reference to LLVM components
with references to libLLVM.so when necessary. Among other things, this
completes fixing libMLIR.so, which has been broken for some configurations
since D77515.
Unlike previously, the pattern is now that mlir libraries should almost
always use add_mlir_library. Previously, some libraries still used
add_llvm_library. However, this confuses the export of targets for use
out of tree because libraries specified with add_llvm_library are exported
by LLVM. Instead users which don't need/can't be linked into libMLIR.so
can specify EXCLUDE_FROM_LIBMLIR
A common error mode is linking with LLVM libraries outside of LINK_COMPONENTS.
This almost always results in symbol confusion or multiply defined options
in LLVM when the same object file is included as a static library and
as part of libLLVM.so. To catch these errors more directly, there's now
mlir_check_all_link_libraries.
To simplify usage of add_mlir_library, we assume that all mlir
libraries depend on LLVMSupport, so it's not necessary to separately specify
it.
tested with:
BUILD_SHARED_LIBS=on,
BUILD_SHARED_LIBS=off + LLVM_BUILD_LLVM_DYLIB,
BUILD_SHARED_LIBS=off + LLVM_BUILD_LLVM_DYLIB + LLVM_LINK_LLVM_DYLIB.
By: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Differential Revision: https://reviews.llvm.org/D79067
[MLIR] Move from using target_link_libraries to LINK_LIBS
This allows us to correctly generate dependencies for derived targets,
such as targets which are created for object libraries.
By: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Differential Revision: https://reviews.llvm.org/D79243
Three commits have been squashed to avoid intermediate build breakage.
In cmake, dependencies on generated files require some sophistication in the build system. At build time, files are parsed to determine which headers they depend on and these dependencies are injected into the build system. This works well with ninja, but has some constraints with the makefile generator. According to the cmake documentation, this only works reliably within the same directory.
This patch expands the usage of mlir-headers to include all generated headers and adds an mlir-generic-headers target which triggers generation of dialect-independent headers. These targets are used to express dependencies on generated headers. This is mostly handled in AddMLIR.cmake and only a few CMakeLists.txt files need to change.
Differential Revision: https://reviews.llvm.org/D79242
Define MLIR_MAIN_INCLUDE_DIR, as it was not set anywhere.
Set MLIR_MAIN_SRC_DIR to the actual "source directory", and not the
"include directory" (as currently set).
Differential Revision: https://reviews.llvm.org/D77943
Previously, the tablegen() cmake command, which defines custom
commands for running tablegen, included several hardcoded paths. This
becomes unwieldy as there are more users for which these paths are
insufficient. For most targets, cmake uses include_directories() and
the INCLUDE_DIRECTORIES directory property to specify include paths.
This change picks up the INCLUDE_DIRECTORIES property and adds it
to the include path used when running tablegen. As a side effect, this
allows us to remove several hard coded paths to tablegen that are redundant
with specified include_directories().
I haven't removed the hardcoded path to CMAKE_CURRENT_SOURCE_DIR, which
seems generically useful. There are several users in clang which apparently
don't have the current directory as an include_directories(). This could
be considered separately.
The new version of this path uses list APPEND rather than list TRANSFORM,
in order to be compatible with cmake 3.4.3. If we update to cmake 3.12 then
we can use list TRANSFORM instead.
Differential Revision: https://reviews.llvm.org/D77156
Previously, the tablegen() cmake command, which defines custom
commands for running tablegen, included several hardcoded paths. This
becomes unwieldy as there are more users for which these paths are
insufficient. For most targets, cmake uses include_directories() and
the INCLUDE_DIRECTORIES directory property to specify include paths.
This change picks up the INCLUDE_DIRECTORIES property and adds it
to the include path used when running tablegen. As a side effect, this
allows us to remove several hard coded paths to tablegen that are redundant
with specified include_directories().
I haven't removed the hardcoded path to CMAKE_CURRENT_SOURCE_DIR, which
seems generically useful. There are several users in clang which apparently
don't have the current directory as an include_directories(). This could
be considered separately.
Differential Revision: https://reviews.llvm.org/D77156
Summary:
This revisions performs several cleanups to the generated dialect documentation:
* Standardizes format of attributes/operands/results sections
* Splits out operation/type/dialect documentation generation to allow for composing generated and hand-written documentation
* Add section for declarative assembly syntax and successors
* General cleanup
Differential Revision: https://reviews.llvm.org/D76573
Two MLIR examples do not link because the library path is different when using Xcode vs Makefiles.
This change adds the configuration name to the library path when building with Xcode.
i.e. LLVM_BUILD_DIR/debug/lib
Summary: This generates the class declarations for dialects using the existing 'Dialect' tablegen classes.
Differential Revision: https://reviews.llvm.org/D76185
Putting this up mainly for discussion on
how this should be done. I am interested in MLIR from
the Julia side and we currently have a strong preference
to dynamically linking against the LLVM shared library,
and would like to have a MLIR shared library.
This patch adds a new cmake function add_mlir_library()
which accumulates a list of targets to be compiled into
libMLIR.so. Note that not all libraries make sense to
be compiled into libMLIR.so. In particular, we want
to avoid libraries which primarily exist to support
certain tools (such as mlir-opt and mlir-cpu-runner).
Note that the resulting libMLIR.so depends on LLVM, but
does not contain any LLVM components. As a result, it
is necessary to link with libLLVM.so to avoid linkage
errors. So, libMLIR.so requires LLVM_BUILD_LLVM_DYLIB=on
FYI, Currently it appears that LLVM_LINK_LLVM_DYLIB is broken
because mlir-tblgen is linked against libLLVM.so and
and independent LLVM components.
Previous version of this patch broke depencies on TableGen
targets. This appears to be because it compiled all
libraries to OBJECT libraries (probably because cmake
is generating different target names). Avoiding object
libraries results in correct dependencies.
(updated by Stephen Neuendorffer)
Differential Revision: https://reviews.llvm.org/D73130
Jacques Pienaar