The generated sequence with whilelo is unintuitive, but it's the best
I could come up with given the limited number of SVE instructions that
interact with scalar registers. The other sequence I was considering
was something like dup+cmpne, but an extra scalar instruction seems
better than an extra vector instruction.
Differential Revision: https://reviews.llvm.org/D71160
Summary:
This change is in preparation to reuse these test for the Attributor.
It mainly is to remove UB, make it clear what is tested, and use
"modern" run lines.
Reviewers: fhahn, efriedma, mssimpso, davide
Subscribers: bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69747
Summary:
Same as D60846 and D69571 but with a fix for the problem encountered
after them. Both times it was a missing context adjustment in the
handling of PHI nodes.
The reproducers created from the bugs that caused the old commits to be
reverted are included.
Reviewers: nikic, nlopes, mkazantsev, spatel, dlrobertson, uabelho, hakzsam, hans
Subscribers: hiraditya, bollu, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71181
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
A second try after reverted D71072.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71149
Summary:
This is found during https://reviews.llvm.org/D70758
All the other record forms are having suffix o at the end.
ANDIo8 and ANDISo8 are the only two that put o before 8.
This patch rename them to be consistent with others.
Reviewers: #powerpc, hfinkel, nemanjai, lei, steven.zhang, echristo, jhibbits, joerg
Reviewed By: jhibbits
Subscribers: wuzish, hiraditya, kbarton, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70928
Summary:
This adds the family of `vshlq_n` and `vshrq_n` ACLE intrinsics, which
shift every lane of a vector left or right by a compile-time
immediate. They mostly work by expanding to the IR `shl`, `lshr` and
`ashr` operations, with their second operand being a vector splat of
the immediate.
There's a fiddly special case, though. ACLE specifies that the
immediate in `vshrq_n` can take values up to //and including// the bit
size of the vector lane. But LLVM IR thinks that shifting right by the
full size of the lane is UB, and feels free to replace the `lshr` with
an `undef` half way through the optimization pipeline. Hence, to keep
this legal in source code, I have to detect it at codegen time.
Logical (unsigned) right shifts by the element size are handled by
simply emitting the zero vector; arithmetic ones are converted into a
shift of one bit less, which will always give the same output.
In order to do that check, I also had to enhance the tablegen
MveEmitter so that it can cope with converting a builtin function's
operand into a bare integer to pass to a code-generating subfunction.
Previously the only bare integers it knew how to handle were flags
generated from within `arm_mve.td`.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71065
When committing dba420bc05, I missed that a darwin-specific change had
been recently introduced into llvm-cxxfilt, which my change ignored and
consequently broke the darwin build bot. This change fixes this issue as
well as improving naming/commenting of things related to this point so
that people are less likely to run into the same issue as I did.
CodeGenPrepare::placeDebugValues moves variable location intrinsics to be
immediately after the Value they refer to. This makes tracking of locations
very easy; but it changes the order in which assignments appear to the
debugger, from the source programs order to the order in which the
optimised program computes values. This then leads to PR43986 and PR38754,
where variable locations that were in a conditional block are made
unconditional, which is highly misleading.
This patch adjusts placeDbgValues to only re-order variable location
intrinsics if they use a Value before it is defined, significantly reducing
the damage that it does. This is still not 100% safe, but the rest of
CodeGenPrepare needs polishing to correctly update debug info when
optimisations are performed to fully fix this.
This will probably break downstream debuginfo tests -- if the
instruction-stream position of variable location changes isn't the focus of
the test, an easy fix should be to manually apply placeDbgValues' behaviour
to the failing tests, moving dbg.value intrinsics next to SSA variable
definitions thus:
%foo = inst1
%bar = ...
%baz = ...
void call @llvm.dbg.value(metadata i32 %foo, ...
to
%foo = inst1
void call @llvm.dbg.value(metadata i32 %foo, ...
%bar = ...
%baz = ...
This should return your test to exercising whatever it was testing before.
Differential Revision: https://reviews.llvm.org/D58453
Mostly this adds testing for certain aliases in more explicit ways.
There are also a few tidy-ups, and additions of missing testing, where
the feature was either not tested at all, or not tested explicitly and
sufficiently.
Reviewed by: MaskRay, rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D71116
Summary:
This patch adds intrinsics for the following MVE instructions:
* VCADD, VHCADD
* VCMUL
* VCMLA
Each of the above 3 groups has a corresponding new LLVM IR intrinsic.
Reviewers: simon_tatham, MarkMurrayARM, ostannard, dmgreen
Reviewed By: MarkMurrayARM
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71190
With the extra optimisations we have done, these should now be fine to
enable by default. Which is what this patch does.
Differential Revision: https://reviews.llvm.org/D70968
This attempts to teach the cost model in Arm that code such as:
%s = shl i32 %a, 3
%a = and i32 %s, %b
Can under Arm or Thumb2 become:
and r0, r1, r2, lsl #3
So the cost of the shift can essentially be free. To do this without
trying to artificially adjust the cost of the "and" instruction, it
needs to get the users of the shl and check if they are a type of
instruction that the shift can be folded into. And so it needs to have
access to the actual instruction in getArithmeticInstrCost, which if
available is added as an extra parameter much like getCastInstrCost.
We otherwise limit it to shifts with a single user, which should
hopefully handle most of the cases. The list of instruction that the
shift can be folded into include ADC, ADD, AND, BIC, CMP, EOR, MVN, ORR,
ORN, RSB, SBC and SUB. This translates to Add, Sub, And, Or, Xor and
ICmp.
Differential Revision: https://reviews.llvm.org/D70966
This adds some extra cost model tests for shifts, and does some minor
adjustments to some Neon code to make it clear as to what it applies to.
Both NFC.
Summary:
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes situations in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: ormris, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D70431
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes a case in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
This caused "Too many bits for uint64_t" asserts when building Chromium. See
https://crbug.com/1031978#c2 for a reproducer. I'll follow up on the
llvm-commits thread with a creduced version.
> ARMCodeGenPrepare has already been generalized and renamed to
> TypePromotion. We've had it enabled and tested downstream for a
> while, so enable it by default.
>
> Differential Revision: https://reviews.llvm.org/D70998
This is another transform suggested in PR44153:
https://bugs.llvm.org/show_bug.cgi?id=44153
The backend for some targets already manages to get
this if it converts copysign to bitwise logic.
Summary:
The patch removes OffsetToFirstDefinition in the 'scope bytes total'
statistic computation. Thus it unifies the way the scope and the coverage
buckets are computed. The rationals behind that are the following:
1. OffsetToFirstDefinition was used to calculate the variable's life range.
However, there is no simple way to do it accurately, so the scope calculated
this way might be misleading. See D69027 for more details on the subject.
2. Both 'scope bytes total' and coverage buckets seem to be intended
to represent the same data in different ways. Otherwise, the statistics
might be controversial and confusing.
Note that the approach gives up a thorough evaluation of debug information
completeness (i.e. coverage buckets by themselves doesn't tell how good
the debug information is). Only changes in coverage over time make
a 'physical' sense.
Reviewers: djtodoro, aprantl, vsk, dblaikie, avl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70548
MVE doesn't have the range of shuffle instructions available in Neon. We
also cannot use the trick of cutting a difficult vector shuffle in half
to simplify things. Instead we need to be more careful about how we
lower shuffles.
This patch adds an extra combine that attempts to find "whole lane"
vmovs when lowering shuffles of smaller types. This helps us make some
shuffles a lot simpler, generating single lane movs for the parts that
can make use of it, falling back to the original shuffle for the rest.
Differential Revision: https://reviews.llvm.org/D69509
Alas, using half the available vector registers in a single instruction
is just too much for the register allocator to handle. The mve-vldst4.ll
test here fails when these instructions are enabled at present. This
patch disables the generation of VLD4 and VST4 by adding a
mve-max-interleave-factor option, which we currently default to 2.
Differential Revision: https://reviews.llvm.org/D71109
Currently we fail to pick the right insertion point when
PreviousLastPart of a first-order-recurrence is a PHI node not in the
LoopVectorBody. This can happen when PreviousLastPart is produce in a
predicated block. In that case, we should pick the insertion point in
the BB the PHI is in.
Fixes PR44020.
Reviewers: hsaito, fhahn, Ayal, dorit
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D71071
Generate types for global variables with "weak" attribute.
Keep allocation scope the same for both weak and non-weak
globals as ELF symbol table can determine whether a global
symbol is weak or not.
Differential Revision: https://reviews.llvm.org/D71162
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
Summary:
This patch fixes an issue where the PPC MI peephole optimization pass incorrectly remove a vector swap.
Specifically, the pass can combine a splat/swap to a splat/copy. It uses `TargetRegisterInfo::lookThruCopyLike` to determine that the operands to the splat are the same. However, the current logic only compares the operands based on register numbers. In the case where the splat operands are ultimately feed from the same physical register, the pass can incorrectly remove a swap if the feed register for one of the operands has been clobbered.
This patch adds a check to ensure that the registers feeding are both virtual registers or the operands to the splat or swap are both the same register.
Here is an example in pseudo-MIR of what happens in the test cased added in this patch:
Before PPC MI peephole optimization:
```
%arg = XVADDDP %0, %1
$f1 = COPY %arg.sub_64
call double rint(double)
%res.first = COPY $f1
%vec.res.first = SUBREG_TO_REG 1, %res.first, %subreg.sub_64
%arg.swapped = XXPERMDI %arg, %arg, 2
$f1 = COPY %arg.swapped.sub_64
call double rint(double)
%res.second = COPY $f1
%vec.res.second = SUBREG_TO_REG 1, %res.second, %subreg.sub_64
%vec.res.splat = XXPERMDI %vec.res.first, %vec.res.second, 0
%vec.res = XXPERMDI %vec.res.splat, %vec.res.splat, 2
; %vec.res == [ %vec.res.second[0], %vec.res.first[0] ]
```
After optimization:
```
; ...
%vec.res.splat = XXPERMDI %vec.res.first, %vec.res.second, 0
; lookThruCopyLike(%vec.res.first) == lookThruCopyLike(%vec.res.second) == $f1
; so the pass replaces the swap with a copy:
%vec.res = COPY %vec.res.splat
; %vec.res == [ %vec.res.first[0], %vec.res.second[0] ]
```
As best as I can tell, this has occurred since r288152, which added support for lowering certain vector operations to direct moves in the form of a splat.
Committed for vddvss (Colin Samples). Thanks Colin for the patch!
Differential Revision: https://reviews.llvm.org/D69497
The xor'ing behaviour is only used for msvc/crt environments, when we're targeting
macho the guard load code doesn't know about the xor in the epilog. Disable xor'ing
when targeting win32-macho to be consistent.
Differential Revision: https://reviews.llvm.org/D71095
D53794 introduced code to perform the FP_TO_UINT expansion via FP_TO_SINT in a way that would never expose floating-point exceptions in the intermediate steps. Unfortunately, I just noticed there is still a way this can happen. As discussed in D53794, the compiler now generates this sequence:
// Sel = Src < 0x8000000000000000
// Val = select Sel, Src, Src - 0x8000000000000000
// Ofs = select Sel, 0, 0x8000000000000000
// Result = fp_to_sint(Val) ^ Ofs
The problem is with the Src - 0x8000000000000000 expression. As I mentioned in the original review, that expression can never overflow or underflow if the original value is in range for FP_TO_UINT. But I missed that we can get an Inexact exception in the case where Src is a very small positive value. (In this case the result of the sub is ignored, but that doesn't help.)
Instead, I'd suggest to use the following sequence:
// Sel = Src < 0x8000000000000000
// FltOfs = select Sel, 0, 0x8000000000000000
// IntOfs = select Sel, 0, 0x8000000000000000
// Result = fp_to_sint(Val - FltOfs) ^ IntOfs
In the case where the value is already in range of FP_TO_SINT, we now simply compute Val - 0, which now definitely cannot trap (unless Val is a NaN in which case we'd want to trap anyway).
In the case where the value is not in range of FP_TO_SINT, but still in range of FP_TO_UINT, the sub can never be inexact, as Val is between 2^(n-1) and (2^n)-1, i.e. always has the 2^(n-1) bit set, and the sub is always simply clearing that bit.
There is a slight complication in the case where Val is a constant, so we know at compile time whether Sel is true or false. In that scenario, the old code would automatically optimize the sub away, while this no longer happens with the new code. Instead, I've added extra code to check for this case and then just fall back to FP_TO_SINT directly. (This seems to catch even slightly more cases.)
Original version of the patch by Ulrich Weigand. X86 changes added by Craig Topper
Differential Revision: https://reviews.llvm.org/D67105
Summary:
musttail calls should not require allocating extra stack for arguments.
Updates to arguments passed in memory should happen in place before the
epilogue.
This bug was mostly a missed optimization, unless inalloca was used and
store to push conversion fired.
If a reserved call frame was used for an inalloca musttail call, the
call setup and teardown instructions would be deleted, and SP
adjustments would be inserted in the prologue and epilogue. You can see
these are removed from several test cases in this change.
In the case where the stack frame was not reserved, i.e. call frame
optimization fires and turns argument stores into pushes, then the
imbalanced call frame setup instructions created for inalloca calls
become a problem. They remain in the instruction stream, resulting in a
call setup that allocates zero bytes (expected for inalloca), and a call
teardown that deallocates the inalloca pack. This deallocation was
unbalanced, leading to subsequent crashes.
Reviewers: hans
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71097
Summary:
Sample profile loader of AutoFDO tries to replay previous inlining using context sensitive profile. The replay only repeats inlining if the call site block is hot. As a result it punts inlining of small functions, some of which can be beneficial for size, and will still be inlined by CSGCC inliner later. The oscillation between sample profile loader's inlining and regular CGSSC inlining cause unnecessary loss of context-sensitive profile. It doesn't have much impact for inline decision itself, but it negatively affects post-inline profile quality as CGSCC inliner have to scale counts which is not as accurate as the original context sensitive profile, and bad post-inline profile can misguide code layout.
This change added regular Inline Cost calculation for sample profile loader, so we can inline small functions upfront under switch -sample-profile-inline-size. In addition -sample-profile-cold-inline-threshold is added so we can tune the separate size threshold - currently the default is chosen to be the same as regular inliner's cold call-site threshold.
Reviewers: wmi, davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70750
This is a follow-up to D70607 where we made any
extract element on SLM more costly than default. But that is
pessimistic for extract from element 0 because that corresponds
to x86 movd/movq instructions. These generally have >1 cycle
latency, but they are probably implemented as single uop
instructions.
Note that no vectorization tests are affected by this change.
Also, no targets besides SLM are affected because those are
falling through to the default cost of 1 anyway. But this will
become visible/important if we add more specializations via cost
tables.
Differential Revision: https://reviews.llvm.org/D71023
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71072
Current tail duplication integrated in bb layout is designed to increase the fallthrough from a BB's predecessor to its successor, but we have observed cases that duplication doesn't increase fallthrough, or it brings too much size overhead.
To overcome these two issues in function canTailDuplicateUnplacedPreds I add two checks:
make sure there is at least one duplication in current work set.
the number of duplication should not exceed the number of successors.
The modification in hasBetterLayoutPredecessor fixes a bug that potential predecessor must be at the bottom of a chain.
Differential Revision: https://reviews.llvm.org/D64376
SUMMARY:
in the patch https://reviews.llvm.org/D66969 . we need a test case to verify the out text section of the xcoffobject file is correct or not.
but we do not have llvm disassembly tools to dump the xcoffobjectfile . since we commit the patch https://reviews.llvm.org/D70255, we have tools for it. we create this test case for it.
Reviewers: daltenty,hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D70719
Summary:
When trying to calculate the offsets for the jump table entries
we fail to take into account the block alignment, which could be
greater than 4 bytes. This led to cases where the jump table
offset was too big to fit in a byte.
Reviewers: t.p.northover, sdesmalen, ostannard
Reviewed By: ostannard
Subscribers: ostannard, kristof.beyls, hiraditya, llvm-commits
Committed on behalf of David Sherwood (david-arm)
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70533
This introduce a new helper which is used to parse the SHT_GNU_versym section.
LLVM/GNU styles implementations now use it to share the logic.
Differential revision: https://reviews.llvm.org/D71054
Eli Friedman