expressions, to improve source-location information, clarify the
actual receiver of the message, and pave the way for proper C++
support. The ObjCMessageExpr node represents four different kinds of
message sends in a single AST node:
1) Send to a object instance described by an expression (e.g., [x method:5])
2) Send to a class described by the class name (e.g., [NSString method:5])
3) Send to a superclass class (e.g, [super method:5] in class method)
4) Send to a superclass instance (e.g., [super method:5] in instance method)
Previously these four cases where tangled together. Now, they have
more distinct representations. Specific changes:
1) Unchanged; the object instance is represented by an Expr*.
2) Previously stored the ObjCInterfaceDecl* referring to the class
receiving the message. Now stores a TypeSourceInfo* so that we know
how the class was spelled. This both maintains typedef information
and opens the door for more complicated C++ types (e.g., dependent
types). There was an alternative, unused representation of these
sends by naming the class via an IdentifierInfo *. In practice, we
either had an ObjCInterfaceDecl *, from which we would get the
IdentifierInfo *, or we fell into the case below...
3) Previously represented by a class message whose IdentifierInfo *
referred to "super". Sema and CodeGen would use isStr("super") to
determine if they had a send to super. Now represented as a
"class super" send, where we have both the location of the "super"
keyword and the ObjCInterfaceDecl* of the superclass we're
targetting (statically).
4) Previously represented by an instance message whose receiver is a
an ObjCSuperExpr, which Sema and CodeGen would check for via
isa<ObjCSuperExpr>(). Now represented as an "instance super" send,
where we have both the location of the "super" keyword and the
ObjCInterfaceDecl* of the superclass we're targetting
(statically). Note that ObjCSuperExpr only has one remaining use in
the AST, which is for "super.prop" references.
The new representation of ObjCMessageExpr is 2 pointers smaller than
the old one, since it combines more storage. It also eliminates a leak
when we loaded message-send expressions from a precompiled header. The
representation also feels much cleaner to me; comments welcome!
This patch attempts to maintain the same semantics we previously had
with Objective-C message sends. In several places, there are massive
changes that boil down to simply replacing a nested-if structure such
as:
if (message has a receiver expression) {
// instance message
if (isa<ObjCSuperExpr>(...)) {
// send to super
} else {
// send to an object
}
} else {
// class message
if (name->isStr("super")) {
// class send to super
} else {
// send to class
}
}
with a switch
switch (E->getReceiverKind()) {
case ObjCMessageExpr::SuperInstance: ...
case ObjCMessageExpr::Instance: ...
case ObjCMessageExpr::SuperClass: ...
case ObjCMessageExpr::Class:...
}
There are quite a few places (particularly in the checkers) where
send-to-super is effectively ignored. I've placed FIXMEs in most of
them, and attempted to address send-to-super in a reasonable way. This
could use some review.
llvm-svn: 101972
This introduces FunctionType::ExtInfo to hold the calling convention and the
noreturn attribute. The next patch will extend it to include the regparm
attribute and fix the bug.
llvm-svn: 99920
- This fixes many many more places than the test case, but my feeling is we need to audit alignment systematically so I'm not inclined to try hard to test the individual fixes in this patch. If this bothers you, patches welcome!
PR6240.
llvm-svn: 95648
follows (as conservatively as possible) gcc's current behavior: attributes
written on return types that don't apply there are applied to the function
instead, etc. Only parse CC attributes as type attributes, not as decl attributes;
don't accepet noreturn as a decl attribute on ValueDecls, either (it still
needs to apply to other decls, like blocks). Consistently consume CC/noreturn
information throughout codegen; enforce this by removing their default values
in CodeGenTypes::getFunctionInfo().
llvm-svn: 95436
- Don't use GlobalAliases with non-0 GEPs (GNU runtime) - this was unsupported and LLVM will be generating errors if you do it soon. This also simplifies the code generated by the GNU runtime a bit.
- Make GetSelector() return a constant (GNU runtime), not a load of a store of a constant.
- Recognise @selector() expressions as valid static initialisers (as GCC does).
- Add methods to GCObjCRuntime to emit selectors as constants (needed for using @selector() expressions as constants. These need implementing for the Mac runtimes - I couldn't figure out how to do this, they seem to require a load.
- Store an ObjCMethodDecl in an ObjCSelectorExpr so that we can get at the type information for the selector. This is needed for generating typed selectors from @selector() expressions (as GCC does). Ideally, this information should be stored in the Selector, but that would be an invasive change. We should eventually add checks for common uses of @selector() expressions. Possibly adding an attribute that can be applied to method args providing the types of a selector so, for example, you'd do something like this:
- (id)performSelector: __attribute__((selector_types(id, SEL, id)))(SEL)
withObject: (id)object;
Then, any @selector() expressions passed to the method will be check to ensure that it conforms to this signature. We do this at run time on the GNU runtime already, but it would be nice to do it at compile time on all runtimes.
- Made @selector() expressions emit type info if available and the runtime supports it.
Someone more familiar with the Mac runtime needs to implement the GetConstantSelector() function in CGObjCMac. This currently just assert()s.
llvm-svn: 95189
to InterfaceDecl, as it is unrelated to any property and
holds the InterfaceDecl needed for accessing class getter/setter
methods using the dot-syntax.
llvm-svn: 79371
The idea is to segregate Objective-C "object" pointers from general C pointers (utilizing the recently added ObjCObjectPointerType). The fun starts in Sema::GetTypeForDeclarator(), where "SomeInterface *" is now represented by a single AST node (rather than a PointerType whose Pointee is an ObjCInterfaceType). Since a significant amount of code assumed ObjC object pointers where based on C pointers/structs, this patch is very tedious. It should also explain why it is hard to accomplish this in smaller, self-contained patches.
This patch does most of the "heavy lifting" related to moving from PointerType->ObjCObjectPointerType. It doesn't include all potential "cleanups". The good news is additional cleanups can be done later (some are noted in the code). This patch is so large that I didn't want to include any changes that are purely aesthetic.
By making the ObjC types truly built-in, they are much easier to work with (and require fewer "hacks"). For example, there is no need for ASTContext::isObjCIdStructType() or ASTContext::isObjCClassStructType()! We believe this change (and the follow-up cleanups) will pay dividends over time.
Given the amount of code change, I do expect some fallout from this change (though it does pass all of the clang tests). If you notice any problems, please let us know asap! Thanks.
llvm-svn: 75314
The implementations of these methods can Use Decl::getASTContext() to get the ASTContext.
This commit touches a lot of files since call sites for these methods are everywhere.
I used pre-tokenized "carbon.h" and "cocoa.h" headers to do some timings, and there was no real time difference between before the commit and after it.
llvm-svn: 74501
lazy PCH deserialization. Propagate that argument wherever it needs to
be. No functionality change, except that I've tightened up a few PCH
tests in preparation.
llvm-svn: 69406
Changed GenerateConstantString() to take an ObjCStringLiteral (instead of a std::string). While this isn't strictly necessary, it seems cleaner and allows us to cache to "containsNonAscii" if necessary (to avoid checking in both Sema and CodeGen).
llvm-svn: 68114
- Lift CGFunctionInfo creation up to callers of EmitCall.
- Move isVariadic bit out of CGFunctionInfo, take as argument to
GetFunctionType instead.
No functionality change.
llvm-svn: 63550
that every declaration lives inside a DeclContext.
Moved several things that don't have names but were ScopedDecls (and,
therefore, NamedDecls) to inherit from Decl rather than NamedDecl,
including ObjCImplementationDecl and LinkageSpecDecl. Now, we don't
store empty DeclarationNames for these things, nor do we try to insert
them into DeclContext's lookup structure.
The serialization tests are temporarily disabled. We'll re-enable them
once we've sorted out the remaining ownership/serialiazation issues
between DeclContexts and TranslationUnion, DeclGroups, etc.
llvm-svn: 62562
are formed. In particular, a diagnostic with all its strings and ranges is now
packaged up and sent to DiagnosticClients as a DiagnosticInfo instead of as a
ton of random stuff. This has the benefit of simplifying the interface, making
it more extensible, and allowing us to do more checking for things like access
past the end of the various arrays passed in.
In addition to introducing DiagnosticInfo, this also substantially changes how
Diagnostic::Report works. Instead of being passed in all of the info required
to issue a diagnostic, Report now takes only the required info (a location and
ID) and returns a fresh DiagnosticInfo *by value*. The caller is then free to
stuff strings and ranges into the DiagnosticInfo with the << operator. When
the dtor runs on the DiagnosticInfo object (which should happen at the end of
the statement), the diagnostic is actually emitted with all of the accumulated
information. This is a somewhat tricky dance, but it means that the
accumulated DiagnosticInfo is allowed to keep pointers to other expression
temporaries without those pointers getting invalidated.
This is just the minimal change to get this stuff working, but this will allow
us to eliminate the zillions of variant "Diag" methods scattered throughout
(e.g.) sema. For example, instead of calling:
Diag(BuiltinLoc, diag::err_overload_no_match, typeNames,
SourceRange(BuiltinLoc, RParenLoc));
We will soon be able to just do:
Diag(BuiltinLoc, diag::err_overload_no_match)
<< typeNames << SourceRange(BuiltinLoc, RParenLoc));
This scales better to support arbitrary types being passed in (not just
strings) in a type-safe way. Go operator overloading?!
llvm-svn: 59502
- EmitStmt is no longer required to finish with a current insertion
point defined (i.e. it does not need to make dummy
blocks). Instead, it can clear the insertion point in the builder
which indicates that the current insertion point is unreachable.
- CodeGenFunction provides HaveInsertPoint and EnsureInsertPoint
which respectively test if there is an insert point and ensure an
insertion point exists (by making a dummy block).
- Clearly mark functions in CodeGenFunction which can be called with
no insertion point defined. Currently this is a limited set, and
EmitStmt simply EnsureInsertPoint()s before emitting subsequent IR.
Remove EmitDummyBlock, which is no longer needed. Clients who haven't
already cleared the insertion point (typically via EmitBranch) can do
so by hand.
Remove isDummyBlock, which has effectively been renamed to
HaveInsertPoint.
The main thrust of this change is that we no longer have create dummy
blocks just to destroy them a short time later in EmitBlock in the
common case that there is no unreachable code following something like
a goto.
Additionally, this means that we are not using the hokey condition in
isDummyBlock that a block without a name is a dummy block. Guess how
well that works when we never emit block names!
llvm-svn: 59089
- Add CodeGenFunction::EmitAnyExprToTemp
o Like EmitAnyExpr, but emits aggregates to a temporary location if
none is available. Seems like this should be simpler (even aside
from using first class aggregates).
- Killed CodeGenFunction::EmitCallArg (just append the pair)
- Conversion of RValues to actual call arguments is now isolated in
CodeGenFunction::EmitCall.
llvm-svn: 55970
- Change Obj-C runtime message API, drop the ObjCMessageExpr arg in
favor of just result type and selector. Necessary so it can be
reused in situations where we don't want to cons up an
ObjCMessageExpr.
- Update aggregate binary assignment to know about special property
ref lvalues.
- Add CodeGenFunction::EmitCallArg overload which takes an already
emitted rvalue.
Add CodeGenFunction::StoreComplexIntoAddr.
Disabled logic in Sema for parsing Objective-C dot-syntax that
accesses methods. This code does not search in the correct order and
the AST node has no way of properly representing its results.
Updated StmtDumper to print a bit more information about
ObjCPropertyRefExprs.
llvm-svn: 55561
- Added CodeGenFunction::EmitCall which just takes the callee, return
type, and a list of (Value*,QualType) pairs.
- Added CodeGenFunction::EmitCallArg which handles emitting code for
a call argument and turning it into an appropriate
(Value*,QualType) pair.
- Changed Objective-C runtime interface so that the actual emission
of arguments for message sends is (once again) done in the code to
emit a message send.
No intended functionality change, this is prep work for better ABI
support and for Objective-C property setter support.
llvm-svn: 55560
- Only supports simple assignment and atomic semantics are ignored.
- Not quite usable yet because the methods do not actually get added
to the class metadata.
- Added ObjCPropertyDecl::getSetterKind (one of Assign, Copy, Retain).
- Rearrange CodeGenFunction so synthesis can reuse function prolog /
epilog code.
llvm-svn: 55365
- Returns an RValue.
- Reduced to only taking the CodeGenFunction, Expr, and Receiver.
- Becomes responsible for emitting the arguments.
Add CodeGenFunction::EmitCallExprExt
- Takes optional extra arguments to insert at the head of the call.
- This allows the Obj-C runtimes to call into this and isolates the
argument and call instruction generation code to one place. Upshot
is that we now pass structures (more) correctly.
Also, fix one aspect of generating methods which take structure
arguments (for NeXT). This probably needs to be merged with the
SetFunctionAttributes code in CodeGenModule.cpp
llvm-svn: 55223
Change CodeGenFunction::EmitParmDecl to take either a ParmVarDecl or an
ImplicitParamDecl.
Drop hasAggregateLLVMType from CodeGenModule.cpp (use version in
CodeGenFunction).
Change the Objective-C method generation to use EmitParmDecl for
implicit parameters.
llvm-svn: 54838
ObjCInterfaceDecl.
Change ObjCRuntime::GenerateMessageSendSuper to take the
ObjCInterfaceDecl for the super class, instead of just its name.
Change EmitObjCMessageExpr to make the right runtime calls for super
sends in class methods (i.e. a super send with the class object as
the receiver).
llvm-svn: 54833
- This is in prep for implementation class support for the NeXT
runtime, for which the existing methods don't provide enough
information (and additionally make too many assumptions about how
things should be emitted).
llvm-svn: 54824
- Returns addr of constant for argument + '\0'.
- I couldn't think of a better name.
- Move appropriate users of GetAddrOfConstantString to this.
Rename getStringForStringLiteral to GetStringForStringLiteral.
Add GetAddrOfConstantStringFromLiteral
- This combines GetAddrOfConstantString and
GetStringForStringLiteral. This method can be, but is not yet, more
efficient.
Change GetAddrOfConstantString to not add terminating '\0'
- <rdar://problem/6140956>
llvm-svn: 54768
Changed CGObjCRuntime::GenerateConstantString interface to take
std::string instead of char* and size.
Change ObjC functions which call on GenerateConstantString to bitcast
result to appropriate type.
llvm-svn: 54659
- Kill unnecessary #includes in .cpp files. This is an automatic
sweep so some things removed are actually used, but happen to be
included by a previous header. I tried to get rid of the obvious
examples and this was the easiest way to trim the #includes in one
fell swoop.
- We now return to regularly scheduled development.
llvm-svn: 54632
- Drop {Decl.h,DeclObjC.h,IdentifierTable.h} from Expr.h
- Moved Sema::getCurMethodDecl() out of line (dependent on
ObjCMethodDecl via dyn_cast).
llvm-svn: 54629
in CGObjCGNU.cpp and once in CGObjCEtoile.cpp. Moved its definition to
CGObjC.cpp. This resolves a build error in Xcode, and also cleans things up.
llvm-svn: 49429
lib dir and move all the libraries into it. This follows the main
llvm tree, and allows the libraries to be built in parallel. The
top level now enforces that all the libs are built before Driver,
but we don't care what order the libs are built in. This speeds
up parallel builds, particularly incremental ones.
llvm-svn: 48402
Daniel Dunbar