UNIX03 conformance requires utilities to flush stdout before exiting and raise
an error if writing fails. Flushing already happens on a call to exit
and thus automatically on a return from main. Write failure is then
detected by LLVM's default SIGPIPE handler. The handler already exits with
a non-zero code, but conformance additionally requires an error message.
First reapply attempt I hadn't noticed the test had changed, hopefully this
goes better.
UNIX03 conformance requires utilities to flush stdout before exiting and raise
an error if writing fails. Flushing already happens on a call to exit
and thus automatically on a return from main. Write failure is then
detected by LLVM's default SIGPIPE handler. The handler already exits with
a non-zero code, but conformance additionally requires an error message.
This has been superseded by the llvm/Support/VCSRevision.h header. So
far as I can tell, nothing in the CMake build sets LLVM_VERSION_INFO. It
was always undefined, and the ifdefs using it were dead. However, CMake
is very flexible, so it's possible that I missed some ways to set this
variable. One could, for example, probably pass -DLLVM_VERSION_INFO=x on
the command line and get that through to configure_file, or set the
variable in an obscure way (`set(${proj}_VERSION_INFO "x")`). I'm
reasonably confident that isn't happening, but I'd like a second
opinion.
Update the Bazel and gn builds accordingly.
Differential Revision: https://reviews.llvm.org/D126977
This patch adds an llvm-driver multicall tool that can combine multiple
LLVM-based tools. The build infrastructure is enabled for a tool by
adding the GENERATE_DRIVER option to the add_llvm_executable CMake
call, and changing the tool's main function to a canonicalized
tool_name_main format (i.e. llvm_ar_main, clang_main, etc...).
As currently implemented llvm-driver contains dsymutil, llvm-ar,
llvm-cxxfilt, llvm-objcopy, and clang (if clang is included in the
build).
llvm-driver can be enabled from builds by setting
LLVM_TOOL_LLVM_DRIVER_BUILD=On.
There are several limitations in the current implementation, which can
be addressed in subsequent patches:
(1) the multicall binary cannot currently properly handle
multi-dispatch tools. This means symlinking llvm-ranlib to llvm-driver
will not properly result in llvm-ar's main being called.
(2) the multicall binary cannot be comprised of tools containing
conflicting cl::opt options as the global cl::opt option list cannot
contain duplicates.
These limitations can be addressed in subsequent patches.
Differential revision: https://reviews.llvm.org/D109977
In some instances its advantageous to calculate edit distances without worrying about casing.
Currently to achieve this both strings need to be converted to the same case first, then edit distance can be calculated.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D126159
The function promises to canonicalize the path, but neglected to do so
for the root component.
For example, calling remove_dots("/tmp/foo.c", Style::windows_backslash)
resulted in "/tmp\foo.c". Now it produces "\tmp\foo.c".
Also fix FIXME in the corresponding test.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D126412
Paths that start with `\\?\` are absolute paths, and aren't expected
to be used with wildcard expressions.
Previously, the `?` at the start of the path triggered the condition
for a potential wildcard, which caused the path to be split and
reassembled. In builds with `LLVM_WINDOWS_PREFER_FORWARD_SLASH=ON`,
this caused a path like e.g. `\\?\D:\tmp\hello.cpp` to be reassembled
into `\\?\D:\tmp/hello.cpp` which isn't a valid path (as such
absolute paths must use backslashes consistently).
This fixes https://github.com/mstorsjo/llvm-mingw/issues/280.
I'm not sure if there's any straightforward way to add a test
for this case, unfortunately.
Differential Revision: https://reviews.llvm.org/D126675
There are a few places where we use report_fatal_error when the input is broken.
Currently, this function always crashes LLVM with an abort signal, which
then triggers the backtrace printing code.
I think this is excessive, as wrong input shouldn't give a link to
LLVM's github issue URL and tell users to file a bug report.
We shouldn't print a stack trace either.
This patch changes report_fatal_error so it uses exit() rather than
abort() when its argument GenCrashDiag=false.
Reviewed by: nikic, MaskRay, RKSimon
Differential Revision: https://reviews.llvm.org/D126550
Currently added versions are from v1.0 to v1.5, other versions
can be added as needed.
This change also adds documentation about SPIR-V target support
in LLVM.
Differential Revision: https://reviews.llvm.org/D124776
The arch or cpu has its default fpu features and versions such as fpuv2_sf/fpuv3_sf.
And there is also -mfpu option to specify and override fpu version and features.
For example, C860 has fpuv3_sf/fpuv3_df feature as default, when
-mfpu=fpv2 is given, fpuv3_sf/fpuv3_df is replaced with fpuv2_sf/fpuv2_df.
Most clients only used these methods because they wanted to be able to
extend or truncate to the same bit width (which is a no-op). Now that
the standard zext, sext and trunc allow this, there is no reason to use
the OrSelf versions.
The OrSelf versions additionally have the strange behaviour of allowing
extending to a *smaller* width, or truncating to a *larger* width, which
are also treated as no-ops. A small amount of client code relied on this
(ConstantRange::castOp and MicrosoftCXXNameMangler::mangleNumber) and
needed rewriting.
Differential Revision: https://reviews.llvm.org/D125557
It can happen on macOS that terminal doesn't report the "colors"
capability in the terminfo database, in which case `tigetnum` returns -1.
This doesn't mean however that the terminal doesn't supports color, it
just means that the capability is absent from the terminal description.
In that case, we should still fallback to the checking the $TERM
environment variable to see if it supports ANSI escapes codes.
Differential Revision: https://reviews.llvm.org/D125914
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Fix a couple minor details in the existing logic for calculating
saved registers and stack adjustment.
Synthesize the corresponding prologues and epilogues and print them.
(This supersedes the previous printout of one single list of stored
registers; as there's lots of minor nuance differences in how
registers are pushed/popped in various corner cases, it's better to
print the full prologue/epilogue instead of trying to condense it
into one single list.)
Print the raw values of the fields Reg, R, L (LinkRegister) and C
(Chaining) instead of only printing the derived values.
Differential Revision: https://reviews.llvm.org/D125644
https://reviews.llvm.org/D109347 added support for UINT64 json numeric
types. However, it seems that it didn't properly test uint64_t numbers
larger than the int64_t because the number parsing logic doesn't
have any special handling for these large numbers.
This diffs adds a handler for large numbers, and besides that, fixes the
parsing of signed types by checking for errno ERANGE, which is the
recommended way to check if parsing fails because of out of bounds
errors. Before this diff, strtoll was always returning a number within
the bounds of an int64_t and the bounds check it was doing was completely
superfluous.
As an interesting fact about the old implementation, when calling strtoll
with "18446744073709551615", the largest uint64_t, End was S.end(), even
though it didn't use all digits. Which means that this check can only be
used to identify if the numeric string is malformed or not.
This patch also adds additional tests for extreme cases.
Differential Revision: https://reviews.llvm.org/D125322
Checking whether two KnownBits are the same is somewhat common,
mainly in test code.
I don't think there is a lot of room for confusion with "determine
what the KnownBits for an icmp eq would be", as that has a
different result type (this is what the eq() method implements,
which returns Optional<bool>).
Differential Revision: https://reviews.llvm.org/D125692
On Apple Silicon Macs, using a Darwin thread priority of PRIO_DARWIN_BG seems to
map directly to the QoS class Background. With this priority, the thread is
confined to efficiency cores only, which makes background indexing take forever.
Introduce a new ThreadPriority "Low" that sits in the middle between Background
and Default, and maps to QoS class "Utility" on Mac. Make this new priority the
default for indexing. This makes the thread run on all cores, but still lowers
priority enough to keep the machine responsive, and not interfere with
user-initiated actions.
I didn't change the implementations for Windows and Linux; on these systems,
both ThreadPriority::Background and ThreadPriority::Low map to the same thread
priority. This could be changed as a followup (e.g. by using SCHED_BATCH for Low
on Linux).
See also https://github.com/clangd/clangd/issues/1119.
Reviewed By: sammccall, dgoldman
Differential Revision: https://reviews.llvm.org/D124715
Allow zext, sext, trunc, truncUSat and truncSSat to extend or truncate
to the same bit width, which is a no-op.
Disallowing this forced clients to use workarounds like using
zextOrTrunc (even though they never wanted truncation) or zextOrSelf
(even though they did not want its strange behaviour of allowing a
*smaller* bit width, which is also treated as a no-op).
Differential Revision: https://reviews.llvm.org/D125556
UNIX03 conformance requires utilities to flush stdout before exiting and raise
an error if writing fails. Flushing already happens on a call to exit
and thus automatically on a return from main. Write failure is then
detected by LLVM's default SIGPIPE handler. The handler already exits with
a non-zero code, but conformance additionally requires an error message.
This commit adds 'K' to supported extension list (before 'J').
It makes "Zk*" extensions correctly placed before "Zv*" extensions.
Multi-letter "Z*" extensions are first ordered with the most closely
related alphabetical extension category ("IMAF..."). This is represented
in LLVM as `AllStdExts' variable in `llvm/lib/Support/RISCVISAInfo.cpp'.
However, it did not have 'k' making "Zk*" extensions not correctly ordered.
Reviewed By: kito-cheng
Differential Revision: https://reviews.llvm.org/D124340
While I think this is a performance improvement over the original, this actually fixes a correctness issue: For an appendable underlying stream, padToAlignment would fail if the additional padding would have caused the stream to grow since it was doing its own check on bounds. By deferring to the regular writeArray method this takes the same path as everything else, which does the correct bounds check in WritableBinaryStreamRef::checkOffsetForWrite (i.e. skips the extension check if BSF_Append is set). I had started to fix the existing bounds check in BinaryStreamWriter but deferred to this because it layered better and is more efficient/consistent.
It didn't look like this method was tested at all, so I added a unit test.
Differential Revision: https://reviews.llvm.org/D124746
This is needed for parallelizing of loading modules symbols in LLDB
(D122975). Currently LLDB can parallelize indexing symbols
when loading a module, but modules are loaded sequentially. If LLDB
index cache is enabled, this means that the cache loading is not
parallelized, even though it could. However doing that creates
a threadpool-within-threadpool situation, so the number of threads
would not be properly limited.
This change adds ThreadPoolTaskGroup as a simple type that can be
used with ThreadPool calls to put tasks into groups that can be
independently waited for (even recursively from within a task)
but still run in the same thread pool.
Differential Revision: https://reviews.llvm.org/D123225
Bugzilla #47579: if you invoke clang on Windows via a pathname in
which a quoted section closes just after a backslash, e.g.
"C:\Program Files\Whatever\"clang.exe
then cmd.exe and CreateProcess will correctly find the binary, because
when they parse the program name at the start of the command line,
they don't regard the \ before the " as having any kind of escaping
effect. This is different from the behaviour of the Windows standard C
library when it parses the rest of the command line, which would
consider that \" not to close the quoted string.
But this confuses windows::GetCommandLineArguments, because the
Windows API function GetCommandLineW() will return a command line
containing that \" sequence, and cl::TokenizeWindowsCommandLine will
tokenize the whole string according to the C library's rules. So it
will misidentify where the program name stops and the arguments start.
To fix this, I've introduced a new variant function
cl::TokenizeWindowsCommandLineFull(), intended to be applied to the
string returned from GetCommandLineW(). It parses the first word of
the command line according to CreateProcess's rules, considering \ to
never be an escaping character; thereafter, it switches over to the C
library rules for the rest of the command line.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D122914
When cl::TokenizeWindowsCommandLine received a command line with an
unterminated double-quoted string at the end, it would discard the
text within that string. That doesn't match the behavior of the
standard Windows C library, which will return the text in the unclosed
quoted string as an argv word.
Fixed, and added extra unit tests in that area.
In some cases (specifically the one in Bugzilla #47579) this could
cause TokenizeWindowsCommandLine to return a zero-length list of
arguments, leading to an array overrun at the call site in
windows::GetCommandLineArguments. Added a check there, for extra
safety: now windows::GetCommandLineArguments will return an error code
instead of failing an assertion.
(This change was written as part of https://reviews.llvm.org/D122914,
but split into a separate commit at the last minute at the code
reviewer's suggestion, because it's fixing an unrelated bug in the
same area. The rest of D122914 will follow in the next commit.)
This is the first patch of a series to upstream support for the new
subtarget.
Contributors:
Jay Foad <jay.foad@amd.com>
Konstantin Zhuravlyov <kzhuravl_dev@outlook.com>
Patch 1/N for upstreaming AMDGPU gfx11 architectures.
Reviewed By: foad, kzhuravl, #amdgpu
Differential Revision: https://reviews.llvm.org/D124536
This diff factors out the check "isCrash" from the static method "throwIfCrash".
This is a helper function that can be useful in debugging / analysis, in particular,
I'm planning to use it in the future patches for lld-fuzzer.
Test plan:
1/ ninja check-all
2/ export LLD_IN_TEST=5 ninja check-lld
Differential revision: https://reviews.llvm.org/D124414
llvm-gsymutil has an implementation of AddressRange and AddressRanges
classes. That implementation might be reused in other parts of llvm.
This patch moves AddressRange and AddressRanges classes into llvm/ADT.
Differential Revision: https://reviews.llvm.org/D124350
Functionality of restoreStatOnFile may be reused. Move it into
FileUtilities.cpp. Create helper class FilePermissionsApplier
to store and apply permissions.
Differential Revision: https://reviews.llvm.org/D123821
The recently announced IBM z16 processor implements the architecture
already supported as "arch14" in LLVM. This patch adds support for
"z16" as an alternate architecture name for arch14.
The patch adds SPIRV-specific MC layer implementation, SPIRV object
file support and SPIRVInstPrinter.
Differential Revision: https://reviews.llvm.org/D116462
Authors: Aleksandr Bezzubikov, Lewis Crawford, Ilia Diachkov,
Michal Paszkowski, Andrey Tretyakov, Konrad Trifunovic
Co-authored-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Co-authored-by: Ilia Diachkov <iliya.diyachkov@intel.com>
Co-authored-by: Michal Paszkowski <michal.paszkowski@outlook.com>
Co-authored-by: Andrey Tretyakov <andrey1.tretyakov@intel.com>
Co-authored-by: Konrad Trifunovic <konrad.trifunovic@intel.com>
If capturing groups are used, the regex matcher handles something
like `(.*)suffix` by first doing a maximal match of `.*`, trying to
match `suffix` afterward, and then reducing the maximal stop
position one by one until this finally succeeds. This makes the
match quadratic in the length of the line (with large constant factors).
This is particularly problematic because regexes of this form are
ubiquitous in FileCheck (something like `[[VAR:%.*]] = ...` falls
in this category), making FileCheck executions much slower than
they have any right to be.
This implements a very crude optimization that checks if suffix
starts with a fixed character, and steps back to the last occurrence
of that character, instead of stepping back by one character at a
time. This drops FileCheck time on
clang/test/CodeGen/RISCV/rvv-intrinsics/vloxseg_mask.c from
7.3 seconds to 2.7 seconds.
An obvious further improvement would be to check more than one
character (once again, this is particularly relevant for FileCheck,
because the next character is usually a space, which happens to
have many occurrences).
This should help with https://github.com/llvm/llvm-project/issues/54821.
If the `ExternalFS` has already remapped to an external path then
`RedirectingFileSystem` should not change it to the originally provided
path. This fixes the original path always being used if multiple VFS
overlays were provided and the path wasn't found in the highest (ie.
first in the chain).
For now this is accomplished through the use of a new
`ExposesExternalVFSPath` field on `vfs::Status`. This flag is true when
the `Status` has an external path that's different from its virtual
path, ie. the contained path is the external path. See the plan in
`FileManager::getFileRef` for where this is going - eventually we won't
need `IsVFSMapped` any more and all returned paths should be virtual.
Resolves rdar://90578880 and llvm-project#53306.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D123398
lib/Support/ThreadLocal.cpp has been uncompilable since rL158346 (2012-06) when
`data` became a char array. The error looks like
```
...llvm/lib/Support/Unix/ThreadLocal.inc:66:57: error: array type 'char[8]' is not assignable
void ThreadLocalImpl::setInstance(const void* d) { data = const_cast<void*>(d);}
```
This takes the AARCH64_ARCH_EXT_NAME in AArch64TargetParser.def and uses
it to generate all the "if bit is set add this feature name" code.
Which gives us a bunch that we were missing. I've updated testing
to include those and reordered them to match the order in the .def.
The final part of the test will catch any missing extensions if
we somehow manage to not generate an if block for them.
This has changed the order of cc1's "-target-feature" output so I've
updated some tests in clang to reflect that.
Reviewed By: tmatheson
Differential Revision: https://reviews.llvm.org/D123296
Kazu Hirata