This addresses a fixme in InstSimplify about using decomposeBitTest. This also fixes InstSimplify to handle ugt and ult compares too.
I've modified the interface a little to return only the APInt version of the mask that InstSimplify needs. InstCombine now has a small wrapper routine to create a Constant out of it. I've also dropped the returning of 0 since InstSimplify doesn't need that. So InstCombine creates a zero constant itself.
I also had to make decomposeBitTest support vectors since InstSimplify needs that.
As InstSimplify can't use something from the Transforms library, I've moved the CmpInstAnalysis code to the Analysis library.
Differential Revision: https://reviews.llvm.org/D36593
llvm-svn: 310869
On some targets, the penalty of executing runtime unrolling checks
and then not the unrolled loop can be significantly detrimental to
performance. This results in the need to be more conservative with
the unroll count, keeping a trip count of 2 reduces the overhead as
well as increasing the chance of the unrolled body being executed. But
being conservative leaves performance gains on the table.
This patch enables the unrolling of the remainder loop introduced by
runtime unrolling. This can help reduce the overhead of misunrolled
loops because the cost of non-taken branches is much less than the
cost of the backedge that would normally be executed in the remainder
loop. This allows larger unroll factors to be used without suffering
performance loses with smaller iteration counts.
Differential Revision: https://reviews.llvm.org/D36309
llvm-svn: 310824
This make it consistent with STATISTIC which it will often appears near.
While there move one DEBUG_COUNTER instance out of an anonymous namespace. It's already declaring a static variable so the namespace is unnecessary.
llvm-svn: 310637
To the best of my knowledge -metarenamer is used in two cases:
1) obfuscate names, when e.g. they contain informations that
can't be shared.
2) Improve clarity of the textual IR for testcases.
One of the usecases if getting the output of `opt` and passing it
to the lli interpreter to run the test. If metarenamer renames
@main, lli can't find an entry point.
llvm-svn: 309657
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
Summary:
It is possible for some passes to materialize a call to a libcall (ex: ldexp, exp2, etc),
but these passes will not mark the call as a gc-leaf-function. All libcalls are
actually gc-leaf-functions, so we change llvm::callsGCLeafFunction() to tell us that
available libcalls are equivalent to gc-leaf-function calls.
Reviewers: sanjoy, anna, reames
Reviewed By: anna
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35840
llvm-svn: 309291
Summary:
Until a more advanced version of importing can be implemented for
aliases (one that imports an alias as an available_externally definition
of the aliasee), skip the narrow subset of cases that was possible but
came at a cost: aliases of linkonce_odr functions could be imported
because the linkonce_odr function could be safely duplicated from the
source module. This came/comes at the cost of not being able to 'home'
imported linkonce functions (they had to be emitted linkonce_odr in all
the destination modules (even if they weren't used by an alias) rather
than as available_externally - causing extra object size).
Tangentially, this also was the only reason ThinLTO would emit multiple
CUs in to the resulting DWARF - which happens to be a problem for
Fission (there's a fix for this in GDB but not released yet, etc).
(actually it's not the only reason - but I'm sending a patch to fix the
other reason shortly)
There's no reason to believe this particularly narrow alias importing
was especially/meaningfully important, only that it was /possible/ to
implement in this way. When a more general solution is done, it should
still satisfy the DWARF concerns above, since the import will still be
available_externally, and thus not create extra CUs.
Since now all aliases are treated the same, I removed/simplified some
test cases since they were testing corner cases where there are no
longer any corners.
Reviewers: tejohnson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D35875
llvm-svn: 309278
Summary:
This changes SimplifyLibCalls to use the new OptimizationRemarkEmitter
API.
In fact, as SimplifyLibCalls is only ever called via InstCombine,
(as far as I can tell) the OptimizationRemarkEmitter is added there,
and then passed through to SimplifyLibCalls later.
I have avoided changing any remark text.
This closes PR33787
Patch by Sam Elliott!
Reviewers: anemet, davide
Reviewed By: anemet
Subscribers: davide, mehdi_amini, eraman, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D35608
llvm-svn: 309158
Separated out the profitability from the safety analysis for multiexit
loop unrolling. Currently, this is an NFC because profitability is true
only if the unroll-runtime-multi-exit is set to true (off-by-default).
This is to ease adding the profitability heuristic up for review at
D35380.
llvm-svn: 308753
If OpValue is non-null, we only consider operations similar to OpValue
when intersecting.
Differential Revision: https://reviews.llvm.org/D35292
llvm-svn: 308428
Summary:
When simplifying unconditional branches from empty blocks, we pre-test if the
BB belongs to a set of loop headers and keep the block to prevent passes from
destroying canonical loop structure. However, the current algorithm fails if
the destination of the branch is a loop header. Especially when such a loop's
latch block is folded into loop header it results in additional backedges and
LoopSimplify turns it into a nested loop which prevent later optimizations
from being applied (e.g., loop unrolling and loop interleaving).
This patch augments the existing algorithm by further checking if the
destination of the branch belongs to a set of loop headers and defer
eliminating it if yes to LateSimplifyCFG.
Fixes PR33605: https://bugs.llvm.org/show_bug.cgi?id=33605
Reviewers: efriedma, mcrosier, pacxx, hsung, davidxl
Reviewed By: efriedma
Subscribers: ashutosh.nema, gberry, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35411
llvm-svn: 308422
Summary:
When we runtime unroll with multiple exit blocks, we also need to update the
immediate dominators of the immediate successors of the exit blocks.
Reviewers: reames, mkuper, mzolotukhin, apilipenko
Reviewed by: mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35304
llvm-svn: 307909
Refactored the code and separated out a function
`canSafelyUnrollMultiExitLoop` to reduce redundant checks and make it
easier to add profitability heuristics later.
Added tests to runtime unrolling to make sure that unrolling for
multi-exit loops is not done unless the option
-unroll-runtime-multi-exit is true.
llvm-svn: 307843
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
The loop structure for the outer loop does not contain the epilog
preheader when we try to unroll inner loop with multiple exits and
epilog code is generated. For now, we just bail out in such cases.
Added a test case that shows the problem. Without this bailout, we would
trip on assert saying LCSSA form is incorrect for outer loop.
llvm-svn: 307676
Summary:
As metioned in https://reviews.llvm.org/D34576, checkings in
`collectConstantCandidates` can be replaced by using
`llvm::canReplaceOperandWithVariable`.
The only special case is that `collectConstantCandidates` return false for
all `IntrinsicInst` but it is safe for us to collect constant candidates from
`IntrinsicInst`.
Reviewers: pirama, efriedma, srhines
Reviewed By: efriedma
Subscribers: llvm-commits, javed.absar
Differential Revision: https://reviews.llvm.org/D34921
llvm-svn: 307587
When unrolling under multiple exits which is under off-by-default option,
the assert that checks for VMap entry in loop exit values is too strong.
(assert if VMap entry did not exist, the value should be a
constant). However, values derived from
constants or from values outside loop, does not have a VMap entry too.
Removed the assert and added a testcase showcasing the property for
non-constant values.
llvm-svn: 307542
The patch was reverted due to a bug. The bug was that if the IV is the 2nd operand of the icmp
instruction, then the "Pred" variable gets swapped and differs from the instruction's predicate.
In this patch we use the original predicate to do the transformation.
Also added a test case that exercises this situation.
Differentian Revision: https://reviews.llvm.org/D35107
llvm-svn: 307477
With the NFC refactoring in rL307417 (git SHA 987dd01), all the logic
is in place to support multiple exit/exiting blocks when prolog
remainder is generated.
This patch removed the assert that multiple exit blocks unrolling is only
supported when epilog remainder is generated.
Also, added test runs and checks with PROLOG prefix in
runtime-loop-multiple-exits.ll test cases.
llvm-svn: 307435
Summary:
This is an addon to the change rl304488 cloning fixes. (Originally rl304226 reverted rl304228 and reapplied rl304488 https://reviews.llvm.org/D33655)
rl304488 works great when DILocalVariables that comes from the inlined function has a 'unique-ed' type, but,
in the case when the variable type is distinct we will create a second DILocalVariable in the scope of the original function that was inlined.
Consider cloning of the following function:
```
define private void @f() !dbg !5 {
%1 = alloca i32, !dbg !11
call void @llvm.dbg.declare(metadata i32* %1, metadata !14, metadata !12), !dbg !18
ret void, !dbg !18
}
!14 = !DILocalVariable(name: "inlined", scope: !15, file: !6, line: 5, type: !17) ; came from an inlined function
!15 = distinct !DISubprogram(name: "inlined", linkageName: "inlined", scope: null, file: !6, line: 8, type: !7, isLocal: true, isDefinition: true, scopeLine: 9, isOptimized: false, unit: !0, variables: !16)
!16 = !{!14}
!17 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "some_struct", size: 32, align: 32)
```
Without this fix, when function 'f' is cloned, we will create another DILocalVariable for "inlined", due to its type being distinct.
```
define private void @f.1() !dbg !23 {
%1 = alloca i32, !dbg !26
call void @llvm.dbg.declare(metadata i32* %1, metadata !28, metadata !12), !dbg !30
ret void, !dbg !30
}
!14 = !DILocalVariable(name: "inlined", scope: !15, file: !6, line: 5, type: !17)
!15 = distinct !DISubprogram(name: "inlined", linkageName: "inlined", scope: null, file: !6, line: 8, type: !7, isLocal: true, isDefinition: true, scopeLine: 9, isOptimized: false, unit: !0, variables: !16)
!16 = !{!14}
!17 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "some_struct", size: 32, align: 32)
;
!28 = !DILocalVariable(name: "inlined", scope: !15, file: !6, line: 5, type: !29) ; OOPS second DILocalVariable
!29 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "some_struct", size: 32, align: 32)
```
Now we have two DILocalVariable for "inlined" within the same scope. This result in assert in AsmPrinter/DwarfDebug.h:131: void llvm::DbgVariable::addMMIEntry(const llvm::DbgVariable &): Assertion `V.Var == Var && "conflicting variable"' failed.
(Full example: See: https://bugs.llvm.org/show_bug.cgi?id=33492)
In this change we prevent duplication of types so that when a metadata for DILocalVariable is cloned it will get uniqued to the same metadate node as an original variable.
Reviewers: loladiro, dblaikie, aprantl, echristo
Reviewed By: loladiro
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D35106
llvm-svn: 307418
Minor refactoring to use the preexisting loop exit that's already
calculated. We do not need to recompute the loop exit in ConnectProlog.
Apart from avoiding redundant computation, this is required for
supporting multiple loop exits when Prolog remainder loops are generated.
llvm-svn: 307417
Adds loop expansions for known-size and unknown-sized memcpy calls, allowing the
target to provide the operand types through TTI callbacks. The default values
for the TTI callbacks use int8 operand types and matches the existing behaviour
if they aren't overridden by the target.
Differential revision: https://reviews.llvm.org/D32536
llvm-svn: 307346
Summary:
`Instruction::Switch`: only first operand can be set to a non-constant value.
`Instruction::InsertValue` both the first and the second operand can be set to a non-constant value.
`Instruction::Alloca` return true for non-static allocation.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: srhines, pirama, llvm-commits
Differential Revision: https://reviews.llvm.org/D34905
llvm-svn: 307294
Going through the Constant methods requires redetermining that the Constant is a ConstantInt and then calling isZero/isOne/isMinusOne.
llvm-svn: 307292
Currently, we do not support multiple exiting blocks to the
latch exit block. However, this bailout wasn't triggered when we had a
unique exit block (which is the latch exit), with multiple exiting
blocks to that unique exit.
Moved the bailout so that it's triggered in both cases and added
testcase.
llvm-svn: 307291
Summary: In this code we got to Dom by following the predecessor link of BB. So it stands to reason that BB should also show up as a successor of Dom's terminator right? There isn't a way to have the CFG connect in only one direction is there?
Reviewers: jmolloy, davide, mcrosier
Reviewed By: mcrosier
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D35025
llvm-svn: 307276
It seems that the patch was reverted by mistake. Clang testing showed failure of the
MathExtras.SaturatingMultiply test, however I was unable to reproduce the issue on the
fresh code base and was able to confirm that the transformation introduced by the change
does not happen in the said test. This gives a strong confidence that the actual reason of
the failure of the initial patch was somewhere else, and that problem now seems to be
fixed. Re-submitting the change to confirm that.
llvm-svn: 307244
This adds exact flags to AShr/LShr flags where we can statically
prove it is valid using the range of induction variables. This
allows further optimisations to remove extra loads.
Differential Revision: https://reviews.llvm.org/D34207
llvm-svn: 307157
This patch seems to cause failures of test MathExtras.SaturatingMultiply on
multiple buildbots. Reverting until the reason of that is clarified.
Differential Revision: https://reviews.llvm.org/rL307126
llvm-svn: 307135
-If there is a IndVar which is known to be non-negative, and there is a value which is also non-negative,
then signed and unsigned comparisons between them produce the same result. Both of those can be
seen in the same loop. To allow other optimizations to simplify them, we turn all instructions like
%c = icmp slt i32 %iv, %b
to
%c = icmp ult i32 %iv, %b
if both %iv and %b are known to be non-negative.
Differential Revision: https://reviews.llvm.org/D34979
llvm-svn: 307126
This commit pretty much rolls back the logic added in r306495
as in the testcase provided we simplify an `icmp` looking through
a PHI that hasn't been mapped yet.
I think instsimplify shouldn't do threading over select/phis or
just looking through phis in general, but this is what we have
now. Also, add a test to prevent this from happening in case somebody
wants to modify this code again.
Briefly discussed with Kyle Butt (thanks Kyle!).
llvm-svn: 306938
With fix for use-after-free errors. We can't add the new branch and
remove the old one until we are done with the Builder constructed for
the block.
llvm-svn: 306937
Check if a single cast is preventing handling a first-order-recurrence Phi,
because the scheduling constraints it imposes on the first-order-recurrence
shuffle are infeasible; but they can be made feasible by moving the cast
downwards. Record such casts and move them when vectorizing the loop.
Differential Revision: https://reviews.llvm.org/D33058
llvm-svn: 306884
This patch appends the name of the function to the switch generated lookup
table. This will ease the visual debugging in identifying the function the table
is generated from.
Differential Revision: https://reviews.llvm.org/D34817
llvm-svn: 306867
Summary:
Runtime unrolling is done for loops with a single exit block and a
single exiting block (and this exiting block should be the latch block).
This patch adds logic to support unrolling in the presence of multiple exit
blocks (which also means multiple exiting blocks).
Currently this is under an off-by-default option and is supported when
epilog code is generated. Support in presence of prolog code will be in
a future patch (we just need to add more tests, and update comments).
This patch is essentially an implementation patch. I have not added any
heuristic (in terms of branches added or code size) to decide when
this should be enabled.
Reviewers: mkuper, sanjoy, reames, evstupac
Reviewed by: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33001
llvm-svn: 306846
In rL300494 there was an attempt to deal with excessive compile time on
invocations of getSign/ZeroExtExpr using local caching. This approach only
helps if we request the same SCEV multiple times throughout recursion. But
in the bug PR33431 we see a case where we request different values all the time,
so caching does not help and the size of the cache grows enormously.
In this patch we remove the local cache for this methods and add the recursion
depth limit instead, as we do for arithmetics. This gives us a guarantee that the
invocation sequence is limited and reasonably short.
Differential Revision: https://reviews.llvm.org/D34273
llvm-svn: 306785
Summary:
I was testing using this expansion logic in other cases besides
NVPTX, and found some runtime failures due to the lack of a check
for a zero length memcpy/memset before the loop. There is already
such a check in the memmove expansion code though.
Reviewers: hfinkel
Subscribers: jholewinski, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D34707
llvm-svn: 306541
When simplifying an instruction that has been re-mapped, it should never
simplify to an instruction in the original function. In the edge case
where we are inlining a function into itself, the existing code led to
incorrect behavior. Replace the incorrect code with an assert verifying
that we never expect simplification to produce an instruction in the old
function, unless the functions are the same.
Differential Revision: https://reviews.llvm.org/D33850
llvm-svn: 306495
BlockAddress are only valid within their function context, which does not
interact well with CodeExtractor. Detect this case and prevent it.
Differential Revision: https://reviews.llvm.org/D33839
llvm-svn: 306448
Instead of getBackEdgeTakenCount, use getExitCount on the latch exiting block
(which is proven to be the only exiting block in the loop to be unrolled).
llvm-svn: 306410
metadata out of InstCombine and into helpers.
NFC, this just exposes the logic used by InstCombine when propagating
metadata from one load instruction to another. The plan is to use this
in SROA to address PR32902.
If anyone has better ideas about how to factor this or name variables,
I'm all ears, but this seemed like a pretty good start and lets us make
progress on the PR.
This is based on a patch by Ariel Ben-Yehuda (D34285).
llvm-svn: 306267
This was reverted in r306252, but I already had the bug fixed and was
just trying to form a test case.
The original commit factored the logic for forming dedicated exits
inside of LoopSimplify into a helper that could be used elsewhere and
with an approach that required fewer intermediate data structures. See
that commit for full details including the change to the statistic, etc.
The code looked fine to me and my reviewers, but in fact didn't handle
indirectbr correctly -- it left the 'InLoopPredecessors' vector dirty.
If you have code that looks *just* right, you can end up leaking these
predecessors into a subsequent rewrite, and crash deep down when trying
to update PHI nodes for predecessors that don't exist.
I've added an assert that makes the bug much more obvious, and then
changed the code to reliably clear the vector so we don't get this bug
again in some other form as the code changes.
I've also added a test case that *does* manage to catch this while also
giving some nice positive coverage in the face of indirectbr.
The real code that found this came out of what I think is CPython's
interpreter loop, but any code with really "creative" interpreter loops
mixing indirectbr and other exit paths could manage to tickle the bug.
I was hard to reduce the original test case because in addition to
having a particular pattern of IR, the whole thing depends on the order
of the predecessors which is in turn depends on use list order. The test
case added here was designed so that in multiple different predecessor
orderings it should always end up going down the same path and tripping
the same bug. I hope. At least, it tripped it for me without
manipulating the use list order which is better than anything bugpoint
could do...
llvm-svn: 306257
I want to use the same logic as LoopSimplify to form dedicated exits in
another pass (SimpleLoopUnswitch) so I wanted to factor it out here.
I also noticed that there is a pretty significantly more efficient way
to implement this than the way the code in LoopSimplify worked. We don't
need to actually retain the set of unique exit blocks, we can just
rewrite them as we find them and use only a set to deduplicate.
This did require changing one part of LoopSimplify to not re-use the
unique set of exits, but it only used it to check that there was
a single unique exit. That part of the code is about to walk the exiting
blocks anyways, so it seemed better to rewrite it to use those exiting
blocks to compute this property on-demand.
I also had to ditch a statistic, but it doesn't seem terribly valuable.
Differential Revision: https://reviews.llvm.org/D34049
llvm-svn: 306081
Summary:
This allows strlen to be moved out of the loop in case its argument is
not modified in the loop in LICM.
Reviewers: hfinkel, davide, sanjoy, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34323
llvm-svn: 305641
This is a fix for PR33292 that shows a case of extremely long compilation
of a single .c file with clang, with most time spent within SCEV.
We have a mechanism of limiting recursion depth for getAddExpr to avoid
long analysis in SCEV. However, there are calls from getAddExpr to getMulExpr
and back that do not propagate the info about depth. As result of this, a chain
getAddExpr -> ... .> getAddExpr -> getMulExpr -> getAddExpr -> ... -> getAddExpr
can be extremely long, with every segment of getAddExpr's being up to max depth long.
This leads either to long compilation or crash by stack overflow. We face this situation while
analyzing big SCEVs in the test of PR33292.
This patch applies the same limit on max expression depth for getAddExpr and getMulExpr.
Differential Revision: https://reviews.llvm.org/D33984
llvm-svn: 305463
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Summary:
This problem stems from the fact that instructions are allocated using new
in LLVM, i.e. there is no relationship that can be derived by just looking
at the pointer value.
This interface dispatches to appropriate dominance check given 2 instructions,
i.e. in case the instructions are in the same basic block, ordered basicblock
(with instruction numbering and caching) are used. Otherwise, dominator tree
is used.
This is a preparation patch for https://reviews.llvm.org/D32720
Reviewers: dberlin, hfinkel, davide
Subscribers: davide, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33380
llvm-svn: 304764
This was rL304226, reverted in 304228 due to a clang assertion failure
on the build bots. That problem should have been addressed by clang
commit rL304470.
llvm-svn: 304488
Summary:
Sort OpsToRename before iterating to make iteration order deterministic.
Thanks to Daniel Berlin for the sorting logic.
Reviewers: dberlin, RKSimon, efriedma, davide
Reviewed By: dberlin, davide
Subscribers: sanjoy, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D33265
llvm-svn: 304447
This patch does an inline expansion of memcmp.
It changes the memcmp library call into an inline expansion when the size is
known at compile time and is under a target specified threshold.
This expansion is implemented in CodeGenPrepare and expands into straight line
code. The target specifies a maximum load size and the expansion works by using
this size to load the two sources, compare, and exit early if a difference is
found. It also has a special case when the memcmp result is used in a compare
to zero equality.
Differential Revision: https://reviews.llvm.org/D28637
llvm-svn: 304313
Summary:
In rL302576, DISubprograms gained the constraint that a !dbg attachments to functions must
have a 1:1 mapping to DISubprograms. As part of that change, the function cloning support
was adjusted to attempt to enforce this invariant during cloning. However, there
were several problems with the implementation. Part of these were fixed in rL304079.
However, there was a more fundamental problem with these changes, namely that it
bypasses the matadata value map, causing the cloned metadata to be a mix of metadata
pointing to the new suprogram (where manual code was added to fix those up) and the
old suprogram (where this was not the case). This mismatch could cause a number of
different assertion failures in the DWARF emitter. Some of these are given at
https://github.com/JuliaLang/julia/issues/22069, but some others have been observed
as well. Attempt to rectify this by partially reverting the manual DI metadata fixup,
and instead using the standard value map approach. To retain the desired semantics
of not duplicating the compilation unit and inlined subprograms, explicitly freeze
these in the value map.
Reviewers: dblaikie, aprantl, GorNishanov, echristo
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33655
llvm-svn: 304226
Summary:
I believe https://reviews.llvm.org/rL302576 introduced two bugs:
1) it produces duplicate distinct variables for every: dbg.value describing the same variable.
To fix the problme I switched form getDistinct() to get() in DebugLoc.cpp: auto reparentVar = [&](DILocalVariable *Var) {
return DILocalVariable::getDistinct(
2) It passes NewFunction plain name as a linkagename parameter to Subprogram constructor. Breaks assert in:
|| DeclLinkageName.empty()) || LinkageName == DeclLinkageName) && "decl has a linkage name and it is different"' failed.
#9 0x00007f5010261b75 llvm::DwarfUnit::applySubprogramDefinitionAttributes(llvm::DISubprogram const*, llvm::DIE&) /home/gor/llvm/lib/CodeGen/AsmPrinter/DwarfUnit.cpp:1173:3
#
(Edit: reproducer added)
Here how https://reviews.llvm.org/rL302576 broke coroutine debug info.
Coroutine body of the original function is split into several parts by cloning and removing unneeded code.
All parts describe the original function and variables present in the original function.
For a simple case, prior to Split, original function has these two blocks:
```
PostSpill: ; preds = %AllocaSpillBB
call void @llvm.dbg.value(metadata i32 %x, i64 0, metadata !14, metadata !15), !dbg !13
store i32 %x, i32* %x.addr, align 4
...
and
sw.epilog: ; preds = %sw.bb
%x.addr.reload.addr = getelementptr inbounds %f.Frame, %f.Frame* %FramePtr, i32 0, i32 4, !dbg !20
%4 = load i32, i32* %x.addr.reload.addr, align 4, !dbg !20
call void @llvm.dbg.value(metadata i32 %4, i64 0, metadata !14, metadata !15), !dbg !13!14 = !DILocalVariable(name: "x", arg: 1, scope: !6, file: !7, line: 55, type: !11)
```
Note that in two blocks different expression represent the same original user variable X.
Before rL302576, for every cloned function there was exactly one cloned DILocalVariable(name: "x" as in:
```
define i8* @f(i32 %x) #0 !dbg !6 {
...
!6 = distinct !DISubprogram(name: "f", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55, flags: DIFlagPrototyped,
...
!14 = !DILocalVariable(name: "x", arg: 1, scope: !6, file: !7, line: 55, type: !11)
define internal fastcc void @f.resume(%f.Frame* %FramePtr) #0 !dbg !25 {
...
!25 = distinct !DISubprogram(name: "f", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55, flags: DIFlagPrototyped, isOptimized: false, unit: !0, variables: !2)
!28 = !DILocalVariable(name: "x", arg: 1, scope: !25, file: !7, line: 55, type: !11)
```
After rL302576, for every cloned function there were as many DILocalVariable(name: "x" as there were "call void @llvm.dbg.value" for that variable.
This was causing asserts in VerifyDebugInfo and AssemblyPrinter.
Example:
```
!27 = distinct !DISubprogram(name: "f", linkageName: "f.resume", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55,
!29 = distinct !DILocalVariable(name: "x", arg: 1, scope: !27, file: !7, line: 55, type: !11)
!39 = distinct !DILocalVariable(name: "x", arg: 1, scope: !27, file: !7, line: 55, type: !11)
!41 = distinct !DILocalVariable(name: "x", arg: 1, scope: !27, file: !7, line: 55, type: !11)
```
Second problem:
Prior to rL302576, all clones were described by DISubprogram referring to original function.
```
define i8* @f(i32 %x) #0 !dbg !6 {
...
!6 = distinct !DISubprogram(name: "f", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55, flags: DIFlagPrototyped,
define internal fastcc void @f.resume(%f.Frame* %FramePtr) #0 !dbg !25 {
...
!25 = distinct !DISubprogram(name: "f", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55, flags: DIFlagPrototyped,
```
After rL302576, DISubprogram for clones is of two minds, plain name refers to the original name, linkageName refers to plain name of the clone.
```
!27 = distinct !DISubprogram(name: "f", linkageName: "f.resume", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55,
```
I think the assumption in AsmPrinter is that both name and linkageName should refer to the same entity. It asserts here when they are not:
```
|| DeclLinkageName.empty()) || LinkageName == DeclLinkageName) && "decl has a linkage name and it is different"' failed.
#9 0x00007f5010261b75 llvm::DwarfUnit::applySubprogramDefinitionAttributes(llvm::DISubprogram const*, llvm::DIE&) /home/gor/llvm/lib/CodeGen/AsmPrinter/DwarfUnit.cpp:1173:3
```
After this fix, behavior (with respect to coroutines) reverts to exactly as it was before and therefore making them debuggable again, or even more importantly, compilable, with "-g"
Reviewers: dblaikie, echristo, aprantl
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33614
llvm-svn: 304079
This patch provides an initial prototype for a pass that sinks instructions based on GVN information, similar to GVNHoist. It is not yet ready for commiting but I've uploaded it to gather some initial thoughts.
This pass attempts to sink instructions into successors, reducing static
instruction count and enabling if-conversion.
We use a variant of global value numbering to decide what can be sunk.
Consider:
[ %a1 = add i32 %b, 1 ] [ %c1 = add i32 %d, 1 ]
[ %a2 = xor i32 %a1, 1 ] [ %c2 = xor i32 %c1, 1 ]
\ /
[ %e = phi i32 %a2, %c2 ]
[ add i32 %e, 4 ]
GVN would number %a1 and %c1 differently because they compute different
results - the VN of an instruction is a function of its opcode and the
transitive closure of its operands. This is the key property for hoisting
and CSE.
What we want when sinking however is for a numbering that is a function of
the *uses* of an instruction, which allows us to answer the question "if I
replace %a1 with %c1, will it contribute in an equivalent way to all
successive instructions?". The (new) PostValueTable class in GVN provides this
mapping.
This pass has some shown really impressive improvements especially for codesize already on internal benchmarks, so I have high hopes it can replace all the sinking logic in SimplifyCFG.
Differential revision: https://reviews.llvm.org/D24805
llvm-svn: 303850
This continues the changes started when computeSignBit was replaced with this new version of computeKnowBits.
Differential Revision: https://reviews.llvm.org/D33431
llvm-svn: 303773
Summary:
Before this change, AttributeLists stored a pair of index and
AttributeSet. This is memory efficient if most arguments do not have
attributes. However, it requires doing a search over the pairs to test
an argument or function attribute. Profiling shows that this loop was
0.76% of the time in 'opt -O2' of sqlite3.c, because LLVM constantly
tests values for nullability.
This was worth about 2.5% of mid-level optimization cycles on the
sqlite3 amalgamation. Here are the full perf results:
https://reviews.llvm.org/P7995
Here are just the before and after cycle counts:
```
$ perf stat -r 5 ./opt_before -O2 sqlite3.bc -o /dev/null
13,274,181,184 cycles # 3.047 GHz ( +- 0.28% )
$ perf stat -r 5 ./opt_after -O2 sqlite3.bc -o /dev/null
12,906,927,263 cycles # 3.043 GHz ( +- 0.51% )
```
This patch *does not* change the indices used to query attributes, as
requested by reviewers. Tracking whether an index is usable for array
indexing is a huge pain that affects many of the internal APIs, so it
would be good to come back later and do a cleanup to remove this
internal adjustment.
Reviewers: pete, chandlerc
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D32819
llvm-svn: 303654
This patch builds over https://reviews.llvm.org/rL303349 and replaces
the use of the condition only if it is safe to do so.
We should not blindly RAUW the condition if experimental.guard or assume
is a use of that
condition. This is because LVI may have used the guard/assume to
identify the
value of the condition, and RUAWing will fold the guard/assume and uses
before the guards/assumes.
Reviewers: sanjoy, reames, trentxintong, mkazantsev
Reviewed by: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33257
llvm-svn: 303633
Summary:
With instrumentation profiling, when updating the VP metadata after
an inline, VP metadata on the inlined copy was inadvertantly having
all counts zeroed out. This was causing indirect calls from code inlined
during the call step to be marked as cold in the ThinLTO summaries and
not imported.
The CallerBFI needs to be passed down so that the CallSiteCount can be
computed from the profile summary info. With Sample PGO this was working
since the count is extracted from the branch weight metadata on the
call being inlined (even before we stopped looking at metadata for
non-sample PGO in r302844 this largely wasn't working for instrumentation
PGO since only promoted indirect calls would be getting inlined and have
the metadata).
Added an instrumentation PGO test and renamed the sample PGO test.
Reviewers: danielcdh, eraman
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D33389
llvm-svn: 303574
Summary: This allows pthread_self to be pulled out of a loop by LICM.
Reviewers: hfinkel, arsenm, davide
Reviewed By: davide
Subscribers: davide, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D32782
llvm-svn: 303495
Refactor the strlen optimization code to work for both strlen and wcslen.
This especially helps with programs in the wild where people pass
L"string"s to const std::wstring& function parameters and the wstring
constructor gets inlined.
This also fixes a lingerind API problem/bug in getConstantStringInfo()
where zeroinitializers would always give you an empty string (without a
length) back regardless of the actual length of the initializer which
did not work well in the TrimAtNul==false causing the PR mentioned
below.
Note that the fixed getConstantStringInfo() needed fixes to SelectionDAG
memcpy lowering and may lead to some cases for out-of-bounds
zeroinitializer accesses not getting optimized anymore. So some code
with UB may produce out of bound memory reads now instead of just
producing zeros.
The refactoring "accidentally" fixes http://llvm.org/PR32124
Differential Revision: https://reviews.llvm.org/D32839
llvm-svn: 303461
Summary:
Implements PR889
Removing the virtual table pointer from Value saves 1% of RSS when doing
LTO of llc on Linux. The impact on time was positive, but too noisy to
conclusively say that performance improved. Here is a link to the
spreadsheet with the original data:
https://docs.google.com/spreadsheets/d/1F4FHir0qYnV0MEp2sYYp_BuvnJgWlWPhWOwZ6LbW7W4/edit?usp=sharing
This change makes it invalid to directly delete a Value, User, or
Instruction pointer. Instead, such code can be rewritten to a null check
and a call Value::deleteValue(). Value objects tend to have their
lifetimes managed through iplist, so for the most part, this isn't a big
deal. However, there are some places where LLVM deletes values, and
those places had to be migrated to deleteValue. I have also created
llvm::unique_value, which has a custom deleter, so it can be used in
place of std::unique_ptr<Value>.
I had to add the "DerivedUser" Deleter escape hatch for MemorySSA, which
derives from User outside of lib/IR. Code in IR cannot include MemorySSA
headers or call the MemoryAccess object destructors without introducing
a circular dependency, so we need some level of indirection.
Unfortunately, no class derived from User may have any virtual methods,
because adding a virtual method would break User::getHungOffOperands(),
which assumes that it can find the use list immediately prior to the
User object. I've added a static_assert to the appropriate OperandTraits
templates to help people avoid this trap.
Reviewers: chandlerc, mehdi_amini, pete, dberlin, george.burgess.iv
Reviewed By: chandlerc
Subscribers: krytarowski, eraman, george.burgess.iv, mzolotukhin, Prazek, nlewycky, hans, inglorion, pcc, tejohnson, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D31261
llvm-svn: 303362
There's no need (& a bit incorrect) to mask off the high bits of the
register reference when describing a simple bool value.
Reviewers: aprantl
Differential Revision: https://reviews.llvm.org/D31062
llvm-svn: 303117
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
This pass uses a new target hook to decide whether or not to expand a particular
intrinsic to the shuffevector sequence.
Differential Revision: https://reviews.llvm.org/D32245
llvm-svn: 302631
This change is required because the notion of count is different for
sample profiling and getProfileCount will need to determine the
underlying profile type.
Differential revision: https://reviews.llvm.org/D33012
llvm-svn: 302597
Summary:
This fixes the immediate crash caused by introducing an incorrect inttoptr
before attempting the conversion. There may still be a legality
check missing somewhere earlier for non-integral pointers, but this change
seems necessary in any case.
Reviewers: sanjoy, dberlin
Reviewed By: dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32623
llvm-svn: 302587
As recently discussed on llvm-dev [1], this patch makes it illegal for
two Functions to point to the same DISubprogram and updates
FunctionCloner to also clone the debug info of a function to conform
to the new requirement. To simplify the implementation it also factors
out the creation of inlineAt locations from the Inliner into a
general-purpose utility in DILocation.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
<rdar://problem/31926379>
Differential Revision: https://reviews.llvm.org/D32975
This reapplies r302469 with a fix for a bot failure (reparentDebugInfo
now checks for the case the orig and new function are identical).
llvm-svn: 302576
Summary:
Since I will post patch with some changes to
replaceDominatedUsesWith, it would be good to avoid
duplicating code again.
Reviewers: davide, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32798
llvm-svn: 302575
Use variadic templates instead of relying on <cstdarg> + sentinel.
This enforces better type checking and makes code more readable.
Differential Revision: https://reviews.llvm.org/D32541
llvm-svn: 302571
This caused PR32977.
Original commit message:
> Make it illegal for two Functions to point to the same DISubprogram
>
> As recently discussed on llvm-dev [1], this patch makes it illegal for
> two Functions to point to the same DISubprogram and updates
> FunctionCloner to also clone the debug info of a function to conform
> to the new requirement. To simplify the implementation it also factors
> out the creation of inlineAt locations from the Inliner into a
> general-purpose utility in DILocation.
>
> [1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
> <rdar://problem/31926379>
>
> Differential Revision: https://reviews.llvm.org/D32975
llvm-svn: 302533
- This change allows targets to opt-in to using them instead of the log2
shufflevector algorithm.
- The SLP and Loop vectorizers have the common code to do shuffle reductions
factored out into LoopUtils, and now have a unified interface for generating
reductions regardless of the preference of the target. LoopUtils now uses TTI
to determine what kind of reductions the target wants to handle.
- For CodeGen, basic legalization support is added.
Differential Revision: https://reviews.llvm.org/D30086
llvm-svn: 302514
As recently discussed on llvm-dev [1], this patch makes it illegal for
two Functions to point to the same DISubprogram and updates
FunctionCloner to also clone the debug info of a function to conform
to the new requirement. To simplify the implementation it also factors
out the creation of inlineAt locations from the Inliner into a
general-purpose utility in DILocation.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
<rdar://problem/31926379>
Differential Revision: https://reviews.llvm.org/D32975
llvm-svn: 302469
Previously SimplifyCFG used getSetSize which returns an APInt that is 1 bit wider than the ConstantRange's bit width. In the reasonably common case that the ConstantRange is 64-bits wide, this requires returning a 65-bit APInt. APInt's can only store 64-bits without a memory allocation so this is inefficient.
The new method takes the 8 as an input and tells if the range contains more than that many elements without requiring any wider math.
llvm-svn: 302385
wcslen is part of the C99 and C++98 standards.
- This introduces the function to TargetLibraryInfo.
- Also set attributes for wcslen in llvm::inferLibFuncAttributes().
Differential Revision: https://reviews.llvm.org/D32837
llvm-svn: 302278
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
llvm-svn: 302060
Summary:
Cloning basic blocks in the loop for runtime loop unroller depends on loop being
in rotated form (i.e. loop latch target is the exit block).
Assert that this is true, so that callers of runtime loop unroller pass in
canonical loops.
The single caller of this function has that check recently added:
https://reviews.llvm.org/rL301239
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32801
llvm-svn: 302058
The method is called "get *Param* Alignment", and is only used for
return values exactly once, so it should take argument indices, not
attribute indices.
Avoids confusing code like:
IsSwiftError = CS->paramHasAttr(ArgIdx, Attribute::SwiftError);
Alignment = CS->getParamAlignment(ArgIdx + 1);
Add getRetAlignment to handle the one case in Value.cpp that wants the
return value alignment.
This is a potentially breaking change for out-of-tree backends that do
their own call lowering.
llvm-svn: 301682
This is a follow up to the fix in r298360 to improve the handling of debug
values when redundant LEAs are removed. The fix in r298360 effectively
discarded the debug values. This patch now attempts to preserve the debug
values by using the DWARF DW_OP_stack_value operation via prependDIExpr.
Moved functions appendOffset and prependDIExpr from Local.cpp to
DebugInfoMetadata.cpp and made them available as static member functions of
DIExpression.
Differential Revision: https://reviews.llvm.org/D31604
llvm-svn: 301630
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
This is a second re-land of r298158. This time, this feature is
limited to -fdata-sections builds.
llvm-svn: 301587
This patch introduces a new KnownBits struct that wraps the two APInt used by computeKnownBits. This allows us to treat them as more of a unit.
Initially I've just altered the signatures of computeKnownBits and InstCombine's simplifyDemandedBits to pass a KnownBits reference instead of two separate APInt references. I'll do similar to the SelectionDAG version of computeKnownBits/simplifyDemandedBits as a separate patch.
I've added a constructor that allows initializing both APInts to the same bit width with a starting value of 0. This reduces the repeated pattern of initializing both APInts. Once place default constructed the APInts so I added a default constructor for those cases.
Going forward I would like to add more methods that will work on the pairs. For example trunc, zext, and sext occur on both APInts together in several places. We should probably add a clear method that can be used to clear both pieces. Maybe a method to check for conflicting information. A method to return (Zero|One) so we don't write it out everywhere. Maybe a method for (Zero|One).isAllOnesValue() to determine if all bits are known. I'm sure there are many other methods we can come up with.
Differential Revision: https://reviews.llvm.org/D32376
llvm-svn: 301432
Commits were:
"Use WeakVH instead of WeakTrackingVH in AliasSetTracker's UnkownInsts"
"Add a new WeakVH value handle; NFC"
"Rename WeakVH to WeakTrackingVH; NFC"
The changes assumed pointers are 8 byte aligned on all architectures.
llvm-svn: 301429
Summary:
I plan to use WeakVH to mean "nulls itself out on deletion, but does
not track RAUW" in a subsequent commit.
Reviewers: dblaikie, davide
Reviewed By: davide
Subscribers: arsenm, mehdi_amini, mcrosier, mzolotukhin, jfb, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D32266
llvm-svn: 301424
This patch uses various APInt methods to reduce temporary APInt creation.
This should be all of the unrelated cleanups that got buried in D32376(creating a KnownBits struct) as well as some pointed out by Simon during the review of that. Plus a few improvements to use counting instead of masking.
I've left out any places where we do something like (KnownZero & KnownOne) != 0 as I plan to add a helper method to KnownBits to ask that question and didn't want to thrash that code an additional time.
Differential Revision: https://reviews.llvm.org/D32495
llvm-svn: 301338
One of the fast-math optimizations is to replace calls to standard double
functions with their float equivalents, e.g. exp -> expf. However, this can
cause infinite loops for the following:
float expf(float val) { return (float) exp((double) val); }
A similar inline declaration exists in the MinGW-w64 math.h header file which
when compiled with -O2/3 and fast-math generates infinite loops.
So this fix checks that the calling function to the standard double function
that is being replaced does not match the float equivalent.
Differential Revision: https://reviews.llvm.org/D31806
llvm-svn: 301304
The current Loop Unroll implementation works with loops having a
single latch that contains a conditional branch to a block outside
the loop (the other successor is, by defition of latch, the header).
If this precondition doesn't hold, avoid unrolling the loop as
the code is not ready to handle such circumstances.
Differential Revision: https://reviews.llvm.org/D32261
llvm-svn: 301239
When the location description of a source variable involves arithmetic
on the value itself, it needs to be marked with DW_OP_stack_value since it
is not describing the variable's location, but rather its value.
This is a follow-up to r297971 and fixes the source testcase quoted in
the comment in debuginfo-dce.ll.
rdar://problem/30725338
This reapplies r301093 without modifications.
llvm-svn: 301210
Summary:
Instead of keeping a variable indicating whether there are early exits
in the loop. We keep all the early exits. This improves LICM's ability to
move instructions out of the loop based on is-guaranteed-to-execute.
I am going to update compilation time as well soon.
Reviewers: hfinkel, sanjoy, efriedma, mkuper
Reviewed By: hfinkel
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D32433
llvm-svn: 301196
When the location description of a source variable involves arithmetic
on the value itself, it needs to be marked with DW_OP_stack_value since it
is not describing the variable's location, but rather its value.
This is a follow-up to r297971 and fixes the source testcase quoted in
the comment in debuginfo-dce.ll.
rdar://problem/30725338
llvm-svn: 301093
Currently we choose PostBB as the single successor of QFB, but its possible that QTB's single successor is QFB which would make QFB the correct choice.
Differential Revision: https://reviews.llvm.org/D32323
llvm-svn: 300992
CodeExtractor looks up the dominator node corresponding to return blocks
when splitting them. If one of these blocks is unreachable, there's no
node in the Dom and CodeExtractor crashes because it doesn't check
for domtree node validity.
In theory, we could add just a check for skipping null DTNodes in
`splitReturnBlock` but the fix I propose here is slightly different. To the
best of my knowledge, unreachable blocks are irrelevant for the algorithm,
therefore we can just skip them when building the candidate set in the
constructor.
Differential Revision: https://reviews.llvm.org/D32335
llvm-svn: 300946
getSignBit is a static function that creates an APInt with only the sign bit set. getSignMask seems like a better name to convey its functionality. In fact several places use it and then store in an APInt named SignMask.
Differential Revision: https://reviews.llvm.org/D32108
llvm-svn: 300856
Summary:
See http://llvm.org/docs/LangRef.html#non-integral-pointer-type
The NewGVN test does not fail without these changes (perhaps it does
try to coerce pointers <-> integers to begin with?), but I added the
test case anyway.
Reviewers: dberlin
Subscribers: mcrosier, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D32208
llvm-svn: 300730
The DWARF specification knows 3 kinds of non-empty simple location
descriptions:
1. Register location descriptions
- describe a variable in a register
- consist of only a DW_OP_reg
2. Memory location descriptions
- describe the address of a variable
3. Implicit location descriptions
- describe the value of a variable
- end with DW_OP_stack_value & friends
The existing DwarfExpression code is pretty much ignorant of these
restrictions. This used to not matter because we only emitted very
short expressions that we happened to get right by accident. This
patch makes DwarfExpression aware of the rules defined by the DWARF
standard and now chooses the right kind of location description for
each expression being emitted.
This would have been an NFC commit (for the existing testsuite) if not
for the way that clang describes captured block variables. Based on
how the previous code in LLVM emitted locations, DW_OP_deref
operations that should have come at the end of the expression are put
at its beginning. Fixing this means changing the semantics of
DIExpression, so this patch bumps the version number of DIExpression
and implements a bitcode upgrade.
There are two major changes in this patch:
I had to fix the semantics of dbg.declare for describing function
arguments. After this patch a dbg.declare always takes the *address*
of a variable as the first argument, even if the argument is not an
alloca.
When lowering a DBG_VALUE, the decision of whether to emit a register
location description or a memory location description depends on the
MachineLocation — register machine locations may get promoted to
memory locations based on their DIExpression. (Future) optimization
passes that want to salvage implicit debug location for variables may
do so by appending a DW_OP_stack_value. For example:
DBG_VALUE, [RBP-8] --> DW_OP_fbreg -8
DBG_VALUE, RAX --> DW_OP_reg0 +0
DBG_VALUE, RAX, DIExpression(DW_OP_deref) --> DW_OP_reg0 +0
All testcases that were modified were regenerated from clang. I also
added source-based testcases for each of these to the debuginfo-tests
repository over the last week to make sure that no synchronized bugs
slip in. The debuginfo-tests compile from source and run the debugger.
https://bugs.llvm.org/show_bug.cgi?id=32382
<rdar://problem/31205000>
Differential Revision: https://reviews.llvm.org/D31439
llvm-svn: 300522
The use list is a linked list so getNumUses requires a linear scan through the whole list. hasNUses will stop scanning at N and see if that is the end.
llvm-svn: 300505
This patch is a generalization of the improvement introduced in rL296898.
Previously, we were able to peel one iteration of a loop to get rid of a Phi that becomes
an invariant on the 2nd iteration. In more general case, if a Phi becomes invariant after
N iterations, we can peel N times and turn it into invariant.
In order to do this, we for every Phi in loop's header we define the Invariant Depth value
which is calculated as follows:
Given %x = phi <Inputs from above the loop>, ..., [%y, %back.edge].
If %y is a loop invariant, then Depth(%x) = 1.
If %y is a Phi from the loop header, Depth(%x) = Depth(%y) + 1.
Otherwise, Depth(%x) is infinite.
Notice that if we peel a loop, all Phis with Depth = 1 become invariants,
and all other Phis with finite depth decrease the depth by 1.
Thus, peeling N first iterations allows us to turn all Phis with Depth <= N
into invariants.
Reviewers: reames, apilipenko, mkuper, skatkov, anna, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31613
llvm-svn: 300446
When peeling loops basing on phis becoming invariants, we make a wrong loop size check.
UP.Threshold should be compared against the total numbers of instructions after the transformation,
which is equal to 2 * LoopSize in case of peeling one iteration.
We should also check that the maximum allowed number of peeled iterations is not zero.
Reviewers: sanjoy, anna, reames, mkuper
Reviewed By: mkuper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31753
llvm-svn: 300441
Add hasParamAttribute() and use it instead of hasAttribute(ArgNo+1,
Kind) everywhere.
The fact that the AttributeList index for an argument is ArgNo+1 should
be a hidden implementation detail.
NFC
llvm-svn: 300272
For LCSSA purposes, loop BBs not dominating any of the exits aren't
interesting, as none of the values defined in these blocks can be
used outside the loop.
The way the code computed this information was by comparing each
BB of the loop with each of the exit blocks and ask the dominator tree
about their dominance relation. This is slow.
A more efficient way, implemented here, is that of starting from the
exit blocks and walking the dom upwards until we hit an header. By
transitivity, all the blocks we encounter in our path dominate an exit.
For the testcase provided in PR31851, this reduces compile time on
`opt -O2` by ~25%, going from 1m47s to 1m22s.
Thanks to Dan/MichaelZ for discussions/suggesting the approach/review.
Differential Revision: https://reviews.llvm.org/D31843
llvm-svn: 300255
Summary:
In first order recurrences where phi's are used outside the loop,
we should generate an additional vector.extract of the second last element from
the vectorized phi update.
This is because we require the phi itself (which is the value at the second last
iteration of the vector loop) and not the phi's update within the loop.
Also fix the code gen when we just unroll, but don't vectorize.
Fixes PR32396.
Reviewers: mssimpso, mkuper, anemet
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D31979
llvm-svn: 300238
This seems like a much more natural API, based on Derek Schuff's
comments on r300015. It further hides the implementation detail of
AttributeList that function attributes come last and appear at index
~0U, which is easy for the user to screw up. git diff says it saves code
as well: 97 insertions(+), 137 deletions(-)
This also makes it easier to change the implementation, which I want to
do next.
llvm-svn: 300153
and to expose a handle to represent the actual case rather than having
the iterator return a reference to itself.
All of this allows the iterator to be used with common STL facilities,
standard algorithms, etc.
Doing this exposed some missing facilities in the iterator facade that
I've fixed and required some work to the actual iterator to fully
support the necessary API.
Differential Revision: https://reviews.llvm.org/D31548
llvm-svn: 300032
Summary:
For now, it just wraps AttributeSetNode*. Eventually, it will hold
AvailableAttrs as an inline bitset, and adding and removing enum
attributes will be super cheap.
This sinks AttributeSetNode back down to lib/IR/AttributeImpl.h.
Reviewers: pete, chandlerc
Subscribers: llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D31940
llvm-svn: 300014
In the vectorization of first order recurrence, we vectorize such
that the last element in the vector will be the one extracted to pass into the
scalar remainder loop. However, this is not true when there is a phi (other
than the primary induction variable) is used outside the loop.
In such a case, we need the value from the second last iteration (i.e.
the phi value), not the last iteration (which would be the phi update).
I've added a test case for this. Also see PR32396.
A follow up patch would generate the correct code gen for such cases,
and turn this vectorization on.
Differential Revision: https://reviews.llvm.org/D31910
Reviewers: mssimpso
llvm-svn: 299985
Analysis, it has Analysis passes, and once NewGVN is made an Analysis,
this removes the cross dependency from Analysis to Transform/Utils.
NFC.
llvm-svn: 299980
Before this patch, pass AddDiscriminators always avoided to assign
discriminators to intrinsic calls. This was done mainly for two reasons:
1) We wanted to minimize the number of based discriminators used.
2) We wanted to avoid non-deterministic discriminator assignment for
different debug levels.
Unfortunately, that approach was problematic for MemIntrinsic calls.
MemIntrinsic calls can be split by SROA into loads and stores, and each new
load/store instruction would obtain the debug location from the original
intrinsic call.
If we don't assign a discriminator to MemIntrinsic calls, then we cannot
correctly set the discriminator for the newly created loads and stores.
This may have a negative impact on the basic block weight computation
performed by the SampleLoader.
This patch fixes the issue by letting MemIntrinsic calls have a discriminator.
Differential Revision: https://reviews.llvm.org/D31900
llvm-svn: 299972
From a user prospective, it forces the use of an annoying nullptr to mark the end of the vararg, and there's not type checking on the arguments.
The variadic template is an obvious solution to both issues.
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299949
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
llvm-svn: 299925
This re-lands r299875.
I introduced a bug in Clang code responsible for replacing K&R, no
prototype declarations with a real function definition with a prototype.
The bug was here:
// Collect any return attributes from the call.
- if (oldAttrs.hasAttributes(llvm::AttributeList::ReturnIndex))
- newAttrs.push_back(llvm::AttributeList::get(newFn->getContext(),
- oldAttrs.getRetAttributes()));
+ newAttrs.push_back(oldAttrs.getRetAttributes());
Previously getRetAttributes() carried AttributeList::ReturnIndex in its
AttributeList. Now that we return the AttributeSetNode* directly, it no
longer carries that index, and we call this overload with a single node:
AttributeList::get(LLVMContext&, ArrayRef<AttributeSetNode*>)
That aborted with an assertion on x86_32 targets. I added an explicit
triple to the test and added CHECKs to help find issues like this in the
future sooner.
llvm-svn: 299899
LLVM makes several assumptions about address space 0. However,
alloca is presently constrained to always return this address space.
There's no real way to avoid using alloca, so without this
there is no way to opt out of these assumptions.
The problematic assumptions include:
- That the pointer size used for the stack is the same size as
the code size pointer, which is also the maximum sized pointer.
- That 0 is an invalid, non-dereferencable pointer value.
These are problems for AMDGPU because alloca is used to
implement the private address space, which uses a 32-bit
index as the pointer value. Other pointers are 64-bit
and behave more like LLVM's notion of generic address
space. By changing the address space used for allocas,
we can change our generic pointer type to be LLVM's generic
pointer type which does have similar properties.
llvm-svn: 299888
Summary:
AttributeList::get(Fn|Ret|Param)Attributes no longer creates a temporary
AttributeList just to hide the AttributeSetNode type.
I've also added a factory method to create AttributeLists from a
parallel array of AttributeSetNodes. I think this simplifies
construction of AttributeLists when rewriting function prototypes.
Previously we would test if a particular index had attributes, and
conditionally add a temporary attribute list to a vector. Now the
attribute set vector is parallel to the argument vector already that
these passes already construct.
My long term vision is to wrap AttributeSetNode* inside an AttributeSet
type that holds the enum attributes, but that will come in a follow up
change.
I haven't done any performance measurements for this change because
profiling hasn't shown that any of the affected code is hot.
Reviewers: pete, chandlerc, sanjoy, hfinkel
Reviewed By: pete
Subscribers: jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31198
llvm-svn: 299875
Summary:
While we don't want them aliasing with other pointers, there seems to
be no point in not having them clobber must-aliased'd pointers.
If some day, we split the aliasing and ordering chains, we'd make this
not aliasing but an ordering barrier (IE it doesn't affect it's
memory, but we can't hoist it above it).
Reviewers: hfinkel, george.burgess.iv
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31865
llvm-svn: 299865
In isUseTriviallyOptimizableToLiveOnEntry, pointsToConstantMemory needs to be
called on the load's pointer operand, not on the result of the load (which
might not even be a pointer).
llvm-svn: 299823
Summary:
getModRefInfo is meant to answer the question "what impact does this
instruction have on a given memory location" (not even another
instruction).
Long debate on this on IRC comes to the conclusion the answer should be "nothing special".
That is, a noalias volatile store does not affect a memory location
just by being volatile. Note: DSE and GVN and memdep currently
believe this, because memdep just goes behind AA's back after it says
"modref" right now.
see line 635 of memdep. Prior to this patch we would get modref there, then check aliasing,
and if it said noalias, we would continue.
getModRefInfo *already* has this same AA check, it just wasn't being used because volatile was
lumped in with ordering.
(I am separately testing whether this code in memdep is now dead except for the invariant load case)
Reviewers: jyknight, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31726
llvm-svn: 299741
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299699
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
This is a re-land of r298158 rebased on D31358. This time,
asan.module_ctor is put in a comdat as well to avoid quadratic
behavior in Gold.
llvm-svn: 299697
Create the constructor in the module pass.
This in needed for the GC-friendly globals change, where the constructor can be
put in a comdat in some cases, but we don't know about that in the function
pass.
This is a rebase of r298731 which was reverted due to a false alarm.
llvm-svn: 299695
Summary:
Remove all the caching the clobber walker does, and that the
caching walker does. With the patch to enable storing clobbering
access results for stores, i can find no improvement with the cache
turned on (and a number of degradations, both time and memory, from
the cost of caching. For a large program i have, we do millions of
lookups and inserts with zero hits).
I haven't tried to rename or simplify the walker otherwise yet.
(Appreciate some perf testing on this past my own testing)
Reviewers: george.burgess.iv, davide
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31576
llvm-svn: 299578
stores with some fixes.
Summary:
This enables us to cache the clobbering access for stores, despite the
fact that we can't rewrite the use-def chains themselves.
Early testing shows that, after this change, for larger testcases, it
will be a significant net positive (memory and time) to remove the
walker caching.
Reviewers: george.burgess.iv, davide
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31567
llvm-svn: 299486
Disable bypassing if one of the operands looks like a hash value. Slow
division often occurs in hashtable implementations and fast division is
never taken there because a hash value is extremely unlikely to have
enough upper bits set to zero.
A value is considered to be hash-like if it is produced by
1) XOR operation
2) Multiplication by a constant wider than the shorter type
3) PHI node with all incoming values being hash-like
Differential Revision: https://reviews.llvm.org/D28200
llvm-svn: 299329
Summary:
This enables us to cache the clobbering access for stores, despite the
fact that we can't rewrite the use-def chains themselves.
Early testing shows that, after this change, for larger testcases, it will be a significant net positive (memory and time) to remove the walker caching.
Reviewers: george.burgess.iv, davide
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31567
llvm-svn: 299322
A common way to implement nearbyint is by fiddling with the floating
point environment and calling rint. This is used at least by the BSD
libm and musl. As such, canonicalizing the latter to the former will
create infinite loops for libm and generally pessimize performance, at
least when the generic C versions are used.
This change preserves the rint in the libcall translation and also
handles the domain truncation logic, so that rint with float argument
will be reduced to rintf etc.
llvm-svn: 299247
Since there is no sdiv in SCEV, an 'udiv' is a better canonical form than an 'sdiv' as the user of induction variable
Differential Revision: https://reviews.llvm.org/D31488
llvm-svn: 299118
The first variant contains all current transformations except
transforming switches into lookup tables. The second variant
contains all current transformations.
The switch-to-lookup-table conversion results in code that is more
difficult to analyze and optimize by other passes. Most importantly,
it can inhibit Dead Code Elimination. As such it is often beneficial to
only apply this transformation very late. A common example is inlining,
which can often result in range restrictions for the switch expression.
Changes in execution time according to LNT:
SingleSource/Benchmarks/Misc/fp-convert +3.03%
MultiSource/Benchmarks/ASC_Sequoia/CrystalMk/CrystalMk -11.20%
MultiSource/Benchmarks/Olden/perimeter/perimeter -10.43%
and a couple of smaller changes. For perimeter it also results 2.6%
a smaller binary.
Differential Revision: https://reviews.llvm.org/D30333
llvm-svn: 298799
This moves it to the iterator facade utilities giving it full random
access semantics, etc. It can also now be used with standard algorithms
like std::all_of and std::any_of and range adaptors like llvm::reverse.
Also make the semantics of iterating match what every other iterator
uses and forbid decrementing past the begin iterator. This was used as
a hacky way to work around iterator invalidation. However, every
instance trying to do this failed to actually avoid touching invalid
iterators despite the clear documentation that the removed and all
subsequent iterators become invalid including the end iterator. So I've
added a return of the next iterator to removeCase and rewritten the
loops that were doing this to correctly follow the iterator pattern of
either incremneting or removing and assigning fresh values to the
iterator and the end.
In one case we were trying to go backwards to make this cleaner but it
doesn't actually work. I've made that code match the code we use
everywhere else to remove cases as we iterate. This changes the order of
cases in one test output and I moved that test to CHECK-DAG so it
wouldn't care -- the order isn't semantically meaningful anyways.
llvm-svn: 298791
Create the constructor in the module pass.
This in needed for the GC-friendly globals change, where the constructor can be
put in a comdat in some cases, but we don't know about that in the function
pass.
llvm-svn: 298731
Summary: Declarations need to be filtered out when counting functions.
Reviewers: eraman
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31336
llvm-svn: 298720
Library functions can have specific semantics that affect the behavior of
certain passes. DSE, for instance, gives special treatment to malloc-ed pointers
but not to pointers returned from an equivalently typed (but differently named)
function.
MetaRenamer ought not to alter program semantics, so library functions must
remain untouched.
Reviewers: mehdi_amini, majnemer, chandlerc, davide
Reviewed By: davide
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D31304
llvm-svn: 298659
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Summary: Inliner should update the branch_weights annotation to scale it to proper value.
Reviewers: davidxl, eraman
Reviewed By: eraman
Subscribers: zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D30767
llvm-svn: 298270
NFCI.
Summary:
This is ground work for the changes to enable coercion in NewGVN.
GVN doesn't care if they end up constant because it eliminates as it goes.
NewGVN cares.
IRBuilder and ConstantFolder deliberately present the same interface,
so we use this to our advantage to templatize our functions to make
them either constant only or not.
Reviewers: davide
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30928
llvm-svn: 298262
When InstCombine calls into SimplifyLibCalls and it createa putChar calls, we don't infer the attributes. And since SimplifyLibCalls doesn't use InstCombine's IRBuilder the calls doesn't end up in the worklist on this iteration of InstCombine. So it gets picked up on the next iteration where it causes an IR change. This of course causes InstCombine to run another iteration.
So this patch just gets the attributes right the first time. We already did this for puts and some other libcalls.
Differential Revision: https://reviews.llvm.org/D31094
llvm-svn: 298171
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
Differential Revision: https://reviews.llvm.org/D30121
llvm-svn: 298158
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
llvm-svn: 298010
[Reapplies r297971 and punting on finding a better API for findDbgValues()]
This patch improves debug info quality in InstCombine by looking at
values that are about to be deleted, checking whether there are any
dbg.value instrinsics referring to them, and potentially encoding the
semantics of the deleted instruction into the dbg.value's
DIExpression.
In the example in the testcase (which was extracted from XNU) there is a sequence of
%4 = load %struct.entry*, %struct.entry** %next2, align 8, !dbg !41
%5 = bitcast %struct.entry* %4 to i8*, !dbg !42
%add.ptr4 = getelementptr inbounds i8, i8* %5, i64 -8, !dbg !43
%6 = bitcast i8* %add.ptr4 to %struct.entry*, !dbg !44
call void @llvm.dbg.value(metadata %struct.entry* %6, i64 0, metadata !20, metadata !21), !dbg 34
When these instructions are eliminated by instcombine one after
another, we can still salvage the otherwise dead debug info:
- Bitcasts have no effect, so have the dbg.value point to operand(0)
- Loads can be expressed via a DW_OP_deref
- Constant gep instructions can be replaced by DWARF expression arithmetic
The API introduced by this patch is not specific to instcombine and
can be useful in other places, too.
rdar://problem/30725338
Differential Revision: https://reviews.llvm.org/D30919
llvm-svn: 297994
This patch improves debug info quality in InstCombine by looking at
values that are about to be deleted, checking whether there are any
dbg.value instrinsics referring to them, and potentially encoding the
semantics of the deleted instruction into the dbg.value's
DIExpression.
In the example in the testcase (which was extracted from XNU) there is a sequence of
%4 = load %struct.entry*, %struct.entry** %next2, align 8, !dbg !41
%5 = bitcast %struct.entry* %4 to i8*, !dbg !42
%add.ptr4 = getelementptr inbounds i8, i8* %5, i64 -8, !dbg !43
%6 = bitcast i8* %add.ptr4 to %struct.entry*, !dbg !44
call void @llvm.dbg.value(metadata %struct.entry* %6, i64 0, metadata !20, metadata !21), !dbg 34
When these instructions are eliminated by instcombine one after
another, we can still salvage the otherwise dead debug info:
- Bitcasts have no effect, so have the dbg.value point to operand(0)
- Loads can be expressed via a DW_OP_deref
- Constant gep instructions can be replaced by DWARF expression arithmetic
The API introduced by this patch is not specific to instcombine and
can be useful in other places, too.
rdar://problem/30725338
Differential Revision: https://reviews.llvm.org/D30919
llvm-svn: 297971
Summary:
These are the functions used to determine when values of loads can be
extracted from stores, etc, and to perform the necessary insertions to
do this. There are no changes to the functions themselves except
reformatting, and one case where memdep was informed of a removed load
(which was pushed into the caller).
Reviewers: davide
Subscribers: mgorny, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30478
llvm-svn: 297438
This reverts commit r296488.
As noted by David Blaikie on llvm-commits, I overlooked the case of a
debug function being inlined into a nodebug function being inlined
into a debug function.
llvm-svn: 297163
Summary:
We should check if loop size allows us to peel at least one iteration
before we do so.
Patch by Max Kazantsev!
Reviewers: sanjoy, mkuper, efriedma
Reviewed By: mkuper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30632
llvm-svn: 297122
LoopInfo::getLoopFor returns nullptr if a BB is not in a loop and only
then can the loop be updated to contain the newly created BBs. Add the
missing nullptr check to SplitBlockAndInsertIfThen.
Within LLVM, the only user of this function that also passes a LoopInfo
to be updated is InnerLoopVectorizer::predicateInstructions().
As the method's name implies, the BB operataten on will always be within
a loop, but out-of-tree users may also use it differently (here: Polly).
All other uses of LoopInfo::getLoopFor in the file properly check its
return value for nullptr.
llvm-svn: 297016
Summary:
If a loop contains a Phi node which has an invariant input from back
edge, it is profitable to peel such loops (rather than unroll them) to
use the advantage that this Phi is always invariant starting from 2nd
iteration. After the 1st iteration is peeled, other optimizations can
potentially simplify calculations with this invariant.
Patch by Max Kazantsev!
Reviewers: sanjoy, apilipenko, igor-laevsky, anna, mkuper, reames
Reviewed By: mkuper
Subscribers: mkuper, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D30161
llvm-svn: 296898
Summary:
In current implementation the loop peeling happens after trip-count based partial unrolling and may
sometimes not happen at all due to it (for example, if trip count is known, but UP.Partial = false). This
is generally bad, the more than there are some situations where peeling is profitable even if the partial
unrolling is disabled.
This patch is a NFC which reorders peeling and partial unrolling application and prepares the code for
implementation of the said optimizations.
Patch by Max Kazantsev!
Reviewers: sanjoy, anna, reames, apilipenko, igor-laevsky, mkuper
Reviewed By: mkuper
Subscribers: mkuper, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D30243
llvm-svn: 296897
ValueTracking is used for more thorough analysis of operands. Based on the
analysis, either run-time checks can be simplified (e.g. check only one operand
instead of two) or the transformation can be avoided. For example, it is quite
often the case that a divisor is promoted from a shorter type and run-time
checks for it are redundant.
With additional compile-time analysis of values, two special cases naturally
arise and are addressed by the patch:
1) Both operands are known to be short enough. Then, the long division can be
simply replaced with a short one without CFG modification.
2) If a division is unsigned and the dividend is known to be short then the
long division is not needed at all. Because if the divisor is too big for
short division then the quotient is obviously zero (and the remainder is
equal to the dividend). Actually, the division is not needed when
(divisor > dividend).
Differential Revision: https://reviews.llvm.org/D29897
llvm-svn: 296832
The most important goal of the patch is to break large insertFastDiv function
into separate pieces, so that later a different fast insertion logic can be
implemented using some of these pieces.
Differential Revision: https://reviews.llvm.org/D29896
llvm-svn: 296828
The LLVM backend cannot produce any debug info for an llvm::Function
without a DISubprogram attachment. When inlining a debug-info-carrying
function into a nodebug function, there is therefore no reason to keep
any debug info intrinsic calls or debug locations on the instructions.
This fixes a problem discovered in PR32042.
rdar://problem/30679307
llvm-svn: 296488
This was suggested in D27855: have the inliner add assumptions, so we don't
lose nonnull info provided by argument attributes.
This still doesn't solve PR28430 (dyn_cast), but this gets us closer.
https://reviews.llvm.org/D29999
llvm-svn: 296366
Summary:
Depends on D29606 and D29682
Makes us pass GVN's edge.ll (we also will pass a few other testcases
they just need cleaning up).
Thoughts on the Predicate* hiearchy of classes especially welcome :)
(it's not clear to me how best to organize it, and currently, the getBlock* seems ... uglier than maybe wasting a field somewhere or something).
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29747
llvm-svn: 295889
Add updater to passes that now need it.
Move around code in MemorySSA to expose needed functions.
Summary: Mostly cleanup
Reviewers: george.burgess.iv
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30221
llvm-svn: 295887
Summary:
This lets one add aliasing stores to the updater.
(i'm next going to move the creation/etc functions to the updater)
Reviewers: george.burgess.iv
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30154
llvm-svn: 295677
Summary:
JumpThreading for guards feature has been reverted at https://reviews.llvm.org/rL295200
due to the following problem: the feature used the following algorithm for detection of
diamond patters:
1. Find a block with 2 predecessors;
2. Check that these blocks have a common single parent;
3. Check that the parent's terminator is a branch instruction.
The problem is that these checks are insufficient. They may pass for a non-diamond
construction in case if those two predecessors are actually the same block. This may
happen if parent's terminator is a br (either conditional or unconditional) to a block
that ends with "switch" instruction with exactly two branches going to one block.
This patch re-enables the JumpThreading for guards and fixes this issue by adding the
check that those found predecessors are actually different blocks. This guarantees that
parent's terminator is a conditional branch with exactly 2 different successors, which
is now ensured by assertions. It also adds two more tests for this situation (with parent's
terminator being a conditional and an unconditional branch).
Patch by Max Kazantsev!
Reviewers: anna, sanjoy, reames
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30036
llvm-svn: 295410
Craig Topper