The code is buggy and barely tested. It is also mostly boilerplate.
(This includes MCObjectDisassembler, which is the interface to that
functionality)
Following an IRC discussion with Jim Grosbach, it seems sensible to just
nuke the whole lot of functionality, and dig it up from VCS if
necessary (I hope not!).
All of this stuff appears to have been added in a huge patch dump (look
at the timeframe surrounding e.g. r182628) where almost every patch
seemed to be untested and not reviewed before being committed.
Post-review responses to the patches were never addressed. I don't think
any of it would have passed pre-commit review.
I doubt anyone is depending on this, since this code appears to be
extremely buggy. In limited testing that Michael Spencer and I did, we
couldn't find a single real-world object file that wouldn't crash the
CFG reconstruction stuff. The symbolizer stuff has O(n^2) behavior and
so is not much use to anyone anyway. It seemed simpler to remove them as
a whole. Most of this code is boilerplate, which is the only way it was
able to scrape by 60% coverage.
HEADSUP: Modules folks, some files I nuked were referenced from
include/llvm/module.modulemap; I just deleted the references. Hopefully
that is the right fix (one was a FIXME though!).
llvm-svn: 216983
This allows streams that only use BLOCKINFO for debugging purposes to omit
the block entirely. As long as another stream is available with the correct
BLOCKINFO, the first stream can still be analyzed and dumped.
As part of this commit, BitstreamReader gets a move constructor and move
assignment operator, as well as a takeBlockInfo method.
llvm-svn: 216826
MachOObjectFile in lib/Object currently has no support for parsing the rebase,
binding, and export information from the LC_DYLD_INFO load command in final
linked mach-o images. This patch adds support for parsing the exports trie data
structure. It also adds an option to llvm-objdump to dump that export info.
I did the exports parsing first because it is the hardest. The information is
encoded in a trie structure, but the standard ObjectFile way to inspect content
is through iterators. So I needed to make an iterator that would do a
non-recursive walk through the trie and maintain the concatenation of edges
needed for the current string prefix.
I plan to add similar support in MachOObjectFile and llvm-objdump to
parse/display the rebasing and binding info too.
llvm-svn: 216808
The attached patch simplifies a few interfaces that don't need to take
ownership of a buffer.
For example, both parseAssembly and parseBitcodeFile will parse the
entire buffer before returning. There is no need to take ownership.
Using a MemoryBufferRef makes it obvious in the type signature that
there is no ownership transfer.
llvm-svn: 216488
The memory management in BugPoint is fairly convoluted, so this just unwraps
one layer by changing the return type of functions that always return
owned Modules.
llvm-svn: 216464
Take a StringRef instead of a "const char *".
Take a "std::error_code &" instead of a "std::string &" for error.
A create static method would be even better, but this patch is already a bit too
big.
llvm-svn: 216393
The switch statement would never fire due to the preceding break statement. Also, the switch statement has a default label with no case labels. Simplified the code, and allow it to execute.
llvm-svn: 216346
There are two parts to this. First, the plugin needs to tell gold the comdat by
setting comdat_key.
What gets things a bit more complicated is that gold only seems
symbols. In particular, if A is an alias to B, it only sees the symbols
A and B. It can then ask us to keep symbol A but drop symbol B. What
we have to do instead is to create an internal version of B and make A
an alias to that.
At some point some of this logic should be moved to lib/Linker so that
we don't map a Constant to an internal version just to have lib/Linker
map that again to the destination module.
The reason for implementing this in tools/gold for now is simplicity.
With it in place it should be possible to update clang to use comdats
for constructors and destructors on ELF without breaking the LTO
bootstrap. Once that is done I intend to come back and improve the
interface lib/Linker exposes.
llvm-svn: 216302
This commit expands llvm-cov's functionality by adding support for a new code coverage
tool that uses LLVM's coverage mapping format and clang's instrumentation based profiling.
The gcov compatible tool can be invoked by supplying the 'gcov' command as the first argument,
or by modifying the tool's name to end with 'gcov'.
Differential Revision: http://reviews.llvm.org/D4445
llvm-svn: 216300
AtomicExpandLoadLinked is currently rather ARM-specific. This patch is the first of
a group that aim at making it more target-independent. See
http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-August/075873.html
for details
The command line option is "atomic-expand"
llvm-svn: 216231
There is a fundamental difference between how the gold API and lib/LTO view
the LTO process.
The gold API talks about a particular symbol in a particular file. The lib/LTO
API talks about a symbol in the merged module.
The merged module is then defined in terms of the IR semantics. In particular,
a linkonce_odr GV is only copied if it is used, since it is valid to drop
unused linkonce_odr GVs.
In the testcase in pr19901 both properties collide. What happens is that gold
asks us to keep a particular linkonce_odr symbol, but the IR linker doesn't
copy it to the merged module and we never have a chance to ask lib/LTO to keep
it.
This patch fixes it by having a more direct implementation of the gold API. If
it asks us to keep a symbol, we change the linkage so it is not linkonce. If it
says we can drop a symbol, we do so. All of this before we even send the module
to lib/Linker.
Since now we don't have to produce LTO_SYMBOL_SCOPE_DEFAULT_CAN_BE_HIDDEN,
during symbol resolution we can use a temporary LLVMContext and do lazy
module loading. This allows us to keep the minimum possible amount of
allocated memory around. This should also allow as much parallelism as
we want, since there is no shared context.
llvm-svn: 216215
Implement `uselistorder` and `uselistorder_bb` assembly directives,
which allow the use-list order to be recovered when round-tripping to
assembly.
This is the bulk of PR20515.
llvm-svn: 216025
Owning the buffer is somewhat inflexible. Some Binaries have sub Binaries
(like Archive) and we had to create dummy buffers just to handle that. It is
also a bad fit for IRObjectFile where the Module wants to own the buffer too.
Keeping this ownership would make supporting IR inside native objects
particularly painful.
This patch focuses in lib/Object. If something elsewhere used to own an Binary,
now it also owns a MemoryBuffer.
This patch introduces a few new types.
* MemoryBufferRef. This is just a pair of StringRefs for the data and name.
This is to MemoryBuffer as StringRef is to std::string.
* OwningBinary. A combination of Binary and a MemoryBuffer. This is needed
for convenience functions that take a filename and return both the
buffer and the Binary using that buffer.
The C api now uses OwningBinary to avoid any change in semantics. I will start
a new thread to see if we want to change it and how.
llvm-svn: 216002
* Use StringRef instead of std::string&
* Return a std::unique_ptr<Module> instead of taking an optional module to write
to (was not really used).
* Use current comment style.
* Use current naming convention.
llvm-svn: 215989
Call `verifyModule()` after parsing and after every transformation.
Also convert some `DEBUG(dbgs())` to `errs()` to increase visibility
into what's going on.
llvm-svn: 215951
file with -macho, the Mach-O specific object file parser option.
After some discussion I chose to do this implementation contained in the logic
of llvm-objdump’s MachODump.cpp using a second disassembler for thumb when
needed and with updates mostly contained in the MachOObjectFile class.
llvm-svn: 215931
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
ARM bots (& others, I think, now that I look) were failing because we
were using incorrect printf-style format specifiers. They were wrong
on almost any platform, actually, just mostly harmlessly so.
llvm-svn: 215196
be deleted. This will be reapplied as soon as possible and before
the 3.6 branch date at any rate.
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reverts commits r215111, 215115, 215116, 215117, 215136.
llvm-svn: 215154
I am sure we will be finding bits and pieces of dead code for years to
come, but this is a good start.
Thanks to Lang Hames for making MCJIT a good replacement!
llvm-svn: 215111
Also make the disassembler created with the Mach-O parser (the -m option)
pick up the Target specific attributes specified with -mattr option.
llvm-svn: 215032
mode.
This will cause -verify mode to report failure when RuntimeDyld encounters an
internal error (e.g. overflows in relocation computations). Previously we had
let these errors slip past unreported.
llvm-svn: 214925
This is mostly a cleanup, but it changes a fairly old behavior.
Every "real" LTO user was already disabling the silly internalize pass
and creating the internalize pass itself. The difference with this
patch is for "opt -std-link-opts" and the C api.
Now to get a usable behavior out of opt one doesn't need the funny
looking command line:
opt -internalize -disable-internalize -internalize-public-api-list=foo,bar -std-link-opts
llvm-svn: 214919
Updated `verify-uselistorder` to more than double the number of use-list
orders it checks.
- Every time it verifies an order, it then reverses the order and
verifies again.
- It now verifies the initial order, before running any shuffles.
Changed the default to `-num-shuffles=1`, since this is already four
checks, and after r214584 shuffling is guaranteed to make a new order.
This is part of PR5680.
llvm-svn: 214596
`shuffleUseLists()` is only used in `verify-uselistorder`, so move it
there to avoid bloating other executables. As a drive-by, update some
of the header docs.
This is part of PR5680.
llvm-svn: 214592
"Create a default symver on Linux like ELF OSes."
Fails the build under Debian with ld.gold:
/usr/bin/ld.gold: --default-symver: unknown option
llvm-svn: 214482
Turns out `parseBitcodeFile()` does *not* take ownership of the buffer.
This was already clear in the header docs, but I obviously didn't read
them (having noticed that it gets stored in a `unique_ptr<>`).
llvm-svn: 214313
use in -verify mode.
This patch adds three hidden command line options to llvm-rtdyld:
-target-addr-start <start-addr> : Specify the start of the virtual address
space on the phony target.
-target-addr-end <end-addr> : Specify the end of the virtual address space
on the phony target.
-target-section-sep <sep> : Specify the separation (in bytes) between the
end of one section and the start of the next.
These options automatically default to sane values for the target platform. In
particular, they allow narrow (e.g. 32-bit, 16-bit) targets to be tested from
wider (e.g. 64-bit, 32-bit) hosts without overflowing pointers.
The section separation option defaults to zero, but can be set to a large number
(e.g. 1 << 32) to force large separations between sections in order to
stress-test large-code-model code.
llvm-svn: 214255
Predict and serialize use-list order in bitcode. This makes the option
`-preserve-bc-use-list-order` work *most* of the time, but this is still
experimental.
- Builds a full value-table up front in the writer, sets up a list of
use-list orders to write out, and discards the table. This is a
simpler first step than determining the order from the various
overlapping IDs of values on-the-fly.
- The shuffles stored in the use-list order list have an unnecessarily
large memory footprint.
- `blockaddress` expressions cause functions to be materialized
out-of-order. For now I've ignored this problem, so use-list orders
will be wrong for constants used by functions that have block
addresses taken. There are a couple of ways to fix this, but I
don't have a concrete plan yet.
- When materializing functions lazily, the use-lists for constants
will not be correct. This use case is out of scope: what should the
use-list order be, if it's incomplete?
This is part of PR5680.
llvm-svn: 214125
Ugh. Turns out not even transformation passes link in how to read IR.
I sincerely believe the buildbots will finally agree with my system
after this though. (I don't really understand why all of this has been
working on my system, but not on all the buildbots.)
Create a new tool called llvm-uselistorder to use for verifying use-list
order. For now, just dump everything from the (now defunct)
-verify-use-list-order pass into the tool.
This might be a better way to test use-list order anyway.
Part of PR5680.
llvm-svn: 213957
StringMap doesn't guarantee any particular iteration order,
this is suboptimal when comparing llvm-vtabledump's output for two
object files.
llvm-svn: 213921
The -print-file-name option in llvm-nm is to precede each symbol
with the object file it came from. While code for the parsing of this
option and its aliases existed there was no code to implement it.
llvm-svn: 213906
This tool's job is to dump the vtables inside object files. It is
currently limited to MS ABI vf- and vb-tables but it will eventually
support Itanium-style v-tables as well.
Differential Revision: http://reviews.llvm.org/D4584
llvm-svn: 213903
This patch introduces a 'stub_addr' builtin that can be used to find the address
of the stub for a given (<file>, <section>, <symbol>) tuple. This address can be
used both to verify the contents of stubs (by loading from the returned address)
and to verify references to stubs (by comparing against the returned address).
Example (1) - Verifying stub contents:
Load 8 bytes (assuming a 64-bit target) from the stub for 'x' in the __text
section of f.o, and compare that value against the addres of 'x'.
# rtdyld-check: *{8}(stub_addr(f.o, __text, x) = x
Example (2) - Verifying references to stubs:
Decode the immediate of the instruction at label 'l', and verify that it's
equal to the offset from the next instruction's PC to the stub for 'y' in the
__text section of f.o (i.e. it's the correct PC-rel difference).
# rtdyld-check: decode_operand(l, 4) = stub_addr(f.o, __text, y) - next_pc(l)
l:
movq y@GOTPCREL(%rip), %rax
Since stub inspection requires cooperation with RuntimeDyldImpl this patch
pimpl-ifies RuntimeDyldChecker. Its implementation is moved in to a new class,
RuntimeDyldCheckerImpl, that has access to the definition of RuntimeDyldImpl.
llvm-svn: 213698
createBinary documented that it destroyed the parameter in error cases,
though by observation it does not. By passing the unique_ptr by value
rather than lvalue reference, callers are now explicit about passing
ownership and the function implements the documented contract. Remove
the explicit documentation, since now the behavior cannot be anything
other than what was documented, so it's redundant.
Also drops a unique_ptr::release in llvm-nm that was always run on a
null unique_ptr anyway.
llvm-svn: 213557
Summary: This patch introduces two new iterator ranges and updates existing code to use it. No functional change intended.
Test Plan: All tests (make check-all) still pass.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4481
llvm-svn: 213474
Until now, attempting to create an alias of a required option would
complain if the user supplied the alias, because the required option
didn't have a value. Similarly, if you said the alias was required,
then using the base option would complain that the alias wasn't
supplied. Lastly, if you put required on both, *neither* option would
work.
By changning alias to overload addOccurrence and setting cl::Required
on the original option, we can get this to behave in a more useful
way. I've also added a test and updated a user that was getting this
wrong.
llvm-svn: 212986
The size of the uninitialized sections, like BSS, can exceed the size of
the object file.
Do not attempt to grab the contents of such sections.
llvm-svn: 212953
the specified section. This is same functionality as darwin’s nm(1) "-s" flag.
There is one FIXME in the code and I’m all ears to anyone that can help me
with that. This option takes exactly two strings and should be allowed
anywhere on the command line. Such that "llvm-nm -s __TEXT __text foo.o"
would work. But that does not as the CommandLine Library does not have a
way to make this work as far as I can tell. For now the "-s __TEXT __text"
has to be last on the command line.
llvm-svn: 212842
This will allow the "-s" flag to implemented in the future as it
is in darwin’s nm(1) to list symbols only in the specified section.
Given a LGTM by Shankar Easwaran who originally implemented
the support for lvm-nm’s -print-armap and archive map symbols.
llvm-svn: 212576
Use 0 for the invalid buffer instead of -1/~0 and switch to unsigned
representation to enable more idiomatic usage.
Also introduce a trivial SourceMgr::getMainFileID() instead of hard-coding 0/1
to identify the main file.
llvm-svn: 212398
There were two issues here:
1. At the very least, scattered relocations cannot use the same code to
determine the corresponding symbol being referred to. For some reason we
pretend there is no symbol, even when one actually exists in the symtab, so to
match this behaviour getRelocationSymbol should simply return symbols_end for
scattered relocations.
2. Printing "-" when we can't get a symbol (including the scattered case, but
not exclusively), isn't that helpful. In both cases there *is* interesting
information in that field, so we should print it. As hex will do.
Small part of rdar://problem/17553104
llvm-svn: 212332
We want to encourage users of the C++ LTO API to reuse memory buffers instead
of repeatedly opening and reading the same file contents.
This reverts commit r212305 and implements a tidier scheme.
llvm-svn: 212308
On at least my machine, ar does not register an all symbols read hook (which
previously triggered target initialization), but it does register a claim
files hook, which depends on the targets being initialized.
Differential Revision: http://reviews.llvm.org/D4372
llvm-svn: 212303
This rename makes it easier to identify the specific overload being called
in each particular case and makes future refactorings easier.
Differential Revision: http://reviews.llvm.org/D4370
llvm-svn: 212302
symbol’s name. On darwin the -j flag is used (often in combinations
with other flags) to produce a complete list of symbol names which
than can then be reorder and used with ld(1)’s -order_file.
llvm-svn: 212294
This should allow llvm-ar to be used instead of gnu ar + plugin in a LTO
build. I will add a release note about it once I finish a LTO bootstrap with it.
llvm-svn: 212287
Now that we have a lib/MC/MCAnalysis, the dependency was there just because
of two helper classes. Move the two over to MC.
This will allow IRObjectFile to parse inline assembly.
llvm-svn: 212248
The new library is 150KB on a Release+Asserts build, so it is quiet a bit of
code that regular users of MC don't need to link with now.
llvm-svn: 212209
to select the slice out of a Mach-O universal file. This also includes
support for -arch all, selecting the host architecture by default from
a universal file and checking if -arch is used with a standard Mach-O
it matches that architecture.
llvm-svn: 212108
universal file. This also includes support for -arch all, selecting the host
architecture by default from a universal file and checking if -arch is used
with a standard Mach-O it matches that architecture.
llvm-svn: 212054
Make llvm-cov compatible with gcov for cases where multiple files are
specified on the command line. That is, loop over each one and report
coverage, and report errors on stderr only rather than via return
code.
llvm-svn: 211959
This patch adds a "-verify" mode to the llvm-rtdyld utility. In verify mode,
llvm-rtdyld will test supplied expressions against the linked program images
that it creates in memory. This scheme can be used to verify the correctness
of the relocation logic applied by RuntimeDyld.
The expressions to test will be read out of files passed via the -check option
(there may be more than one of these). Expressions to check are extracted from
lines of the form:
# rtdyld-check: <expression>
This system is designed to fit the llvm-lit regression test workflow. It is
format and target agnostic, and supports verification of images linked for
remote targets. The expression language is defined in
llvm/include/llvm/RuntimeDyldChecker.h . Examples can be found in
test/ExecutionEngine/RuntimeDyld.
llvm-svn: 211956
Add the new AppContainer characteristic which is import for Windows Store
(Metro) compatible applications. Add the new Control Flow Guard flag to bring
the enumeration up to date with the current values as of Windows 8.1.
llvm-svn: 211855
Any uses of tools/lto as a static lib should probably move to lib/LTO.
This was also never implemented in the configure build, so this reduces
the differences among the two.
llvm-svn: 211852
This fixes a regression that made clang -flto -Wl,--plugin-opt=-mattr=+aes not
pass the "+aes" option to the LTOCodeGenerator attributes.
llvm-svn: 211804
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
llvm-svn: 211749
This makes the buffer ownership on error conditions very natural. The buffer
is only moved out of the argument if an object is constructed that now
owns the buffer.
llvm-svn: 211546
This allows us to just use a std::unique_ptr to store the pointer to the buffer.
The flip side is that they have to support releasing the buffer back to the
caller.
Overall this looks like a more efficient and less brittle api.
llvm-svn: 211542
to match llvm-size and other UNIX systems for their nm(1).
Tweak test cases that used llvm-nm with standard input to add a "-" to
indicate that and add a test case to check the default of a.out for llvm-nm.
llvm-svn: 211529
the tool is given multiple files. Also fix the same issue with Mach-O
universal files. And fix the newline spacing to separate the output
in these cases.
llvm-svn: 211405
Back in r128440 tools/LTO started exporting the disassembler interface. It
was never clear why, but whatever the reason I am pretty sure it doesn't hold
for tools/gold.
llvm-svn: 211325
This fixes the processing of --plugin-opt=-jump-table-type=arity.
Nice properties:
* We call InitTargetOptionsFromCodeGenFlags once.
* We call parseCodeGenDebugOptions once.
* It works :-)
llvm-svn: 211322
fat files) to print “ (for architecture XYZ)” for fat files with more than
one architecture to be like what the darwin tools do for fat files.
Also clean up the Mach-O printing of archive membernames in llvm-nm to use
the darwin form of "libx.a(foo.o)".
llvm-svn: 211316
The tools/lto API is not the best choice for implementing a gold plugin. Among
other issues:
* It is an stable ABI. Old errors stay and we have to be really careful
before adding new features.
* It has to support two fairly different linkers: gold and ld64.
* We end up with a plugin that depends on a shared lib, something quiet
unusual in LLVM land.
* It hides LLVM. For some features in the gold plugin it would be really
nice to be able to just get a Module or a GlobalValue.
This change is intended to be a very direct translation from the C API. It
will just enable other fixes and cleanups.
Tested with a LTO bootstrap on linux.
llvm-svn: 211315
dynamic-no-pic is just another output type. If gnu ld gets support for MachO,
it should also add something like LDPO_DYN_NO_PIC to the plugin interface.
llvm-svn: 211305
fat files containing archives.
Also fix a bug in MachOUniversalBinary::ObjectForArch::ObjectForArch()
where it needed a >= when comparing the Index with the number of
objects in a fat file. As the index starts at 0.
llvm-svn: 211230
and the -l option for the long format. Also when the object is a Mach-O
file and the format is berkeley produce output like darwin’s default size(1)
summary berkeley derived output.
Like System V format, there are also some small changes in how and where
the file names and archive member names are printed for darwin and
Mach-O.
Like the changes to llvm-nm these are the first steps in seeing if it is
possible to make llvm-size produce the same output as darwin's size(1).
llvm-svn: 211117
While std::error_code itself seems to work OK in all platforms, there
are few annoying differences with regards to the std::errc enumeration.
This patch adds a simple llvm enumeration, which will hopefully avoid build
breakages in other platforms and surprises as we get more uses of
std::error_code.
llvm-svn: 210920
Without initializing the assembly printers a shared library build of opt is
linked with these libraries whereas for a static build these libraries are dead
code eliminated. This is unfortunate for plugins in case they want to use them,
as they neither can rely on opt to provide this functionality nor can they link
the printers in themselves as this breaks with a shared object build of opt.
This patch calls InitializeAllAsmPrinters() from opt, which increases the static
binary size from 50MB -> 52MB on my system (all backends compiled) and causes no
measurable increase in the time needed to run 'make check'.
llvm-svn: 210914
This code was never being used and any use of it would look fairly strange.
For example, it would try to map a object_error::parse_failed to
std::errc::invalid_argument.
llvm-svn: 210912
Previously there was a separate mode entirely (--hdis vs.
--disassemble). It makes a bit more sense for the immediate printing
style to be a flag for --disassmeble rather than an entirely different
thing.
llvm-svn: 210700
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
llvm-svn: 210687
Add a brief explanation of the data section layout for the unwind data that the
Windows on ARM EH models. This is simply to provide a rough idea of the layout
of the code involved in the decoding of the unwinding. Details on the involved
data structures are available in the associated support header. The bulk of it
is related to printing out the byte-code to help validate generation of WoA EH.
No functional change.
llvm-svn: 210397
This is a first step in seeing if it is possible to make llvm-nm produce
the same output as darwin's nm(1). Darwin's default format is bsd but its
-m output prints the longer Mach-O specific details. For now I added the
"-format darwin" to do this (whos name may need to change in the future).
As there are other Mach-O specific flags to nm(1) which I'm hoping to add some
how in the future. But I wanted to see if I could get the correct output for
-m flag using llvm-nm and the libObject interfaces.
I got this working but would love to hear what others think about this approach
to getting object/format specific details printed with llvm-nm.
llvm-svn: 210285
Add support to llvm-readobj to decode Windows ARM Exception Handling data. This
uses the previously added datastructures to decode the information into a format
that can be used by tests. This is a necessary step to add support for emitting
Windows on ARM exception handling information.
A fair amount of formatting inspiration is drawn from the Win64 EH printer as
well as the ARM EHABI printer. This allows for a reasonably thorough look into
the encoded data.
llvm-svn: 210192
This patch changes GlobalAlias to point to an arbitrary ConstantExpr and it is
up to MC (or the system assembler) to decide if that expression is valid or not.
This reduces our ability to diagnose invalid uses and how early we can spot
them, but it also lets us do things like
@test5 = alias inttoptr(i32 sub (i32 ptrtoint (i32* @test2 to i32),
i32 ptrtoint (i32* @bar to i32)) to i32*)
An important implication of this patch is that the notion of aliased global
doesn't exist any more. The alias has to encode the information needed to
access it in its metadata (linkage, visibility, type, etc).
Another consequence to notice is that getSection has to return a "const char *".
It could return a NullTerminatedStringRef if there was such a thing, but when
that was proposed the decision was to just uses "const char*" for that.
llvm-svn: 210062
Input YAML file might contain multiple object file definitions.
New option `-docnum` allows to specify an ordinal number (starting from 1)
of definition used for an object file generation.
Patch reviewed by Sean Silva.
llvm-svn: 209967
field represents ELF section header sh_info field and does not have any
sense for regular sections. Its interpretation depends on section type.
llvm-svn: 209801
Remove the use of the std::function and replace the capturing lambda with a
non-capturing one, opting to pass the user data down to the context. This is
needed as std::function is not yet available on all hosted platforms (it
requires RTTI, which breaks on Windows).
Thanks to Nico Rieck for pointing this out!
llvm-svn: 209607
Move the implementation of the Win64 EH printer from the COFFDumper into its own
class. This is in preparation for adding support to print ARM EH information.
The only real change here is in printUnwindInfo where we now lambda lift the
implicit this parameter for the resolveFunction. Also setup the printing to
handle ARM. This now has set the stage to introduce ARM EH printing.
llvm-svn: 209606
Make the use of the cache more transparent to the users. There is no reason
that the cached entries really need to be passed along. The overhead for doing
so is minimal: a single extra parameter. This requires that some standalone
functions be brought into the COFFDumper class so that they may access the
cache.
llvm-svn: 209604
Switch to use references for parameters that are guaranteed to be non-null.
Simplifies the code a slight bit in preparation for another change.
llvm-svn: 209603
Change --functions option in llvm-symbolizer tool to accept
values "none", "short" or "linkage". Update the tests and docs
accordingly.
llvm-svn: 209050
Now the only method to configure ELF section's content and size is to assign
a hexadecimal string to the `Content` field. Unfortunately this way is
completely useless when you need to declare a really large section.
To solve this problem this patch adds one more optional field `Size`
to the `RawContentSection` structure. When yaml2obj generates an ELF file
it uses the following algorithm:
1. If both `Content` and `Size` fields are missed create an empty section.
2. If only `Content` field is missed take section length from the `Size`
field and fill the section by zero.
3. If only `Size` field is missed create a section using data from
the `Content` field.
4. If both `Content` and `Size` fields are provided validate that the `Size`
value is not less than size of `Content` data. Than take section length
from the `Size`, fill beginning of the section by `Content` and the rest
by zero.
Examples
--------
* Create a section 0x10000 bytes long filled by zero
Name: .data
Type: SHT_PROGBITS
Flags: [ SHF_ALLOC ]
Size: 0x10000
* Create a section 0x10000 bytes long starting from 'CA' 'FE' 'BA' 'BE'
Name: .data
Type: SHT_PROGBITS
Flags: [ SHF_ALLOC ]
Content: CAFEBABE
Size: 0x10000
The patch reviewed by Michael Spencer.
llvm-svn: 208995
It is more appropriate than the current situation, when one flag
(AbsoluteFilePath) is relevant only if another flag is set.
This refactoring would also simplify fetching the short function name
(stored in DW_AT_name) instead of a linkage name returned currently.
No functionality change.
llvm-svn: 208921
The ELF header e_flags field in the MIPS related test cases handled
incorrectly. The obj2yaml prints too many flags. I will fix that in the
next patches.
The patch reviewed by Michael Spencer and Sean Silva.
llvm-svn: 208752
libraries before linking and executing the target objects.
This allows programs that use external calls (e.g. to libc) to be run under
llvm-rtdyld.
llvm-svn: 208739
We were using libLLVM-Major.Minor.Patch.so for the soname, but we
need the soname to stay consistent for all Major.Minor.* releases
otherwise operating system distributors will need to rebuild all
packages that link with LLVM every time there is a new point release.
This patch also reverses the compatibility symlink, so
libLLVM-Major.Minor.Patch.so is now a symlink that points
to libLLVM-Major-Minor.so.
llvm-svn: 208721
We were using libLLVM-Major.Minor.Patch.so for the soname, but we
need the soname to stay consistent for all Major.Minor.* releases
otherwise operating system distributors will need to rebuild all
packages that link with LLVM every time there is a new point release.
This patch also reverses the compatibility symlink, so
libLLVM-Major.Minor.Patch.so is now a symlink that points
to libLLVM-Major-Minor.so.
llvm-svn: 208708
Sean Silva