Mostly by converting uses of GetErrorStream to AppendError,
so that the call to SetStatus is implicit.
Some remain where it isn't certain that you'll have a message
to set, or you want the output to be on stdout.
One place in CommandObjectWatchpoint previously didn't set
the status to failed at all. However it's pretty obvious
that it should do so.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104697
We should *never* use static local variables in this file as this makes
unittesting the plugin code impossible (and this whole 'testing' thing has
turned out to be rather useful so far).
TestExitDuringExpression test_exit_before_one_thread_no_unwind fails
sporadically on both Arm and AArch64 linux buildbots. This seems like
manifesting itself on a fully loaded machine. I have not found a reliable
timeout value so marking it skip for now.
Those tests are all failing for older Clang versions. This is adding the
respective test decorators for the passing Clang versions to get the recently
revived matrix bot green.
A few times tests have been flaky, presumably by crashed of lldb-vscode
itself. They can be caught by looking at the DAP logs, so I'm dumping
them when the session ends.
When the number of shared libs is massive, there could be hundreds of
thousands of short lived progress events sent to the IDE, which makes it
irresponsive while it's processing all this data. As these small jobs
take less than a second to process, the user doesn't even see them,
because the IDE only display the progress of long operations. So it's
better not to send these events.
I'm fixing that by sending only the events that are taking longer than 5
seconds to process.
In a specific run, I got the number of events from ~500k to 100, because
there was only 1 big lib to parse.
I've tried this on several small and massive targets, and it seems to
work fine.
Differential Revision: https://reviews.llvm.org/D101128
A few users recently were trying to set environment values when using lldb-vscode and were unsure of the format of the "env" launch configuration setting. Clarify the exact format as when users add the "env" launch config setting, they can see this help string in the IDE.
Differential Revision: https://reviews.llvm.org/D104578
LLDB supports having globbing regexes in the process launch arguments that will
be resolved using the user's shell. This requires that we pass the launch args
to the shell and then read back the expanded arguments using LLDB's argdumper
utility.
As the shell will not just expand the globbing regexes but all special
characters, we need to escape all non-globbing charcters such as $, &, <, >,
etc. as those otherwise are interpreted and removed in the step where we expand
the globbing characters. Also because the special characters are shell-specific,
LLDB needs to maintain a list of all the characters that need to be escaped for
each specific shell.
This patch adds the list of special characters that need to be escaped for
`zsh`. Without this patch on systems where `zsh` is the user's shell (like on
all macOS systems) having any of these special characters in your arguments or
path to the binary will cause the process launch to fail. E.g., `lldb -- ./calc
1<2` is failing without this patch. The same happens if the absolute path to
`calc` is in a directory that contains for example parentheses or other special
characters.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D104627
Without DW_CC_pass_by_* attributes that Clang 7 started to emit in this test
we don't properly read back the return value of the `get_*` functions and just
read bogus memory.
See also the TestReturnValue.py test.
Rust's v0 name mangling scheme [1] is easy to disambiguate from other
name mangling schemes because symbols always start with `_R`. The llvm
Demangle library supports demangling the Rust v0 scheme. Use it to
demangle Rust symbols.
Added unit tests that check simple symbols. Ran LLDB built with this
patch to debug some Rust programs compiled with the v0 name mangling
scheme. Confirmed symbol names were demangled as expected.
Note: enabling the new name mangling scheme requires a nightly
toolchain:
```
$ cat main.rs
fn main() {
println!("Hello world!");
}
$ $(rustup which --toolchain nightly rustc) -Z symbol-mangling-version=v0 main.rs -g
$ /home/asm/hacking/llvm/build/bin/lldb ./main --one-line 'b main.rs:2'
(lldb) target create "./main"
Current executable set to '/home/asm/hacking/llvm/rust/main' (x86_64).
(lldb) b main.rs:2
Breakpoint 1: where = main`main::main + 4 at main.rs:2:5, address = 0x00000000000076a4
(lldb) r
Process 948449 launched: '/home/asm/hacking/llvm/rust/main' (x86_64)
warning: (x86_64) /lib64/libgcc_s.so.1 No LZMA support found for reading .gnu_debugdata section
Process 948449 stopped
* thread #1, name = 'main', stop reason = breakpoint 1.1
frame #0: 0x000055555555b6a4 main`main::main at main.rs:2:5
1 fn main() {
-> 2 println!("Hello world!");
3 }
(lldb) bt
error: need to add support for DW_TAG_base_type '()' encoded with DW_ATE = 0x7, bit_size = 0
* thread #1, name = 'main', stop reason = breakpoint 1.1
* frame #0: 0x000055555555b6a4 main`main::main at main.rs:2:5
frame #1: 0x000055555555b78b main`<fn() as core::ops::function::FnOnce<()>>::call_once((null)=(main`main::main at main.rs:1), (null)=<unavailable>) at function.rs:227:5
frame #2: 0x000055555555b66e main`std::sys_common::backtrace::__rust_begin_short_backtrace::<fn(), ()>(f=(main`main::main at main.rs:1)) at backtrace.rs:125:18
frame #3: 0x000055555555b851 main`std::rt::lang_start::<()>::{closure#0} at rt.rs:49:18
frame #4: 0x000055555556c9f9 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] core::ops::function::impls::_$LT$impl$u20$core..ops..function..FnOnce$LT$A$GT$$u20$for$u20$$RF$F$GT$::call_once::h04259e4a34d07c2f at function.rs:259:13
frame #5: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panicking::try::do_call::hb8da45704d5cfbbf at panicking.rs:401:40
frame #6: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panicking::try::h4beadc19a78fec52 at panicking.rs:365:19
frame #7: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panic::catch_unwind::hc58016cd36ba81a4 at panic.rs:433:14
frame #8: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a at rt.rs:34:21
frame #9: 0x000055555555b830 main`std::rt::lang_start::<()>(main=(main`main::main at main.rs:1), argc=1, argv=0x00007fffffffcb18) at rt.rs:48:5
frame #10: 0x000055555555b6fc main`main + 28
frame #11: 0x00007ffff73f2493 libc.so.6`__libc_start_main + 243
frame #12: 0x000055555555b59e main`_start + 46
(lldb)
```
[1]: https://github.com/rust-lang/rust/issues/60705
Reviewed By: clayborg, teemperor
Differential Revision: https://reviews.llvm.org/D104054
HostInfoBase has a deleted dtor/ctor so there is no need to do the same for
all the classes inheriting from it.
Reviewed By: DavidSpickett, JDevlieghere
Differential Revision: https://reviews.llvm.org/D104221
The intention is now that AppendError/SetError/AppendRawError only
be called with some message to show. This enforces that.
For SetError with a Status and a fallback string first assert
that the Status is a failure Status. Then it calls SetError(StringRef)
which checks the message is valid. (which could be the fallback
or the Status')
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D104525
Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.
debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.
Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.
rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387
Add support for extracting basic data from NetBSD/i386 core dumps.
FPU registers are not supported at the moment.
Differential Revision: https://reviews.llvm.org/D101091
This adds a basic SB API for creating and stopping traces.
Note: This doesn't add any APIs for inspecting individual instructions. That'd be a more complicated change and it might be better to enhande the dump functionality to output the data in binary format. I'll leave that for a later diff.
This also enhances the existing tests so that they test the same flow using both the command interface and the SB API.
I also did some cleanup of legacy code.
Differential Revision: https://reviews.llvm.org/D103500
When the number of shared libs is massive, there could be hundreds of
thousands of short lived progress events sent to the IDE, which makes it
irresponsive while it's processing all this data. As these small jobs
take less than a second to process, the user doesn't even see them,
because the IDE only display the progress of long operations. So it's
better not to send these events.
I'm fixing that by sending only the events that are taking longer than 5
seconds to process.
In a specific run, I got the number of events from ~500k to 100, because
there was only 1 big lib to parse.
I've tried this on several small and massive targets, and it seems to
work fine.
Differential Revision: https://reviews.llvm.org/D101128
This is part 2, covering the commands source.
Some uses remain where it's tricky to see what the
logic is or they are not used with AppendError.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104448
Since https://reviews.llvm.org/D103701 AppendError<...>
sets this for you.
This change includes all of the non-command uses.
Some uses remain where it's either tricky to reason about
the logic, or they aren't paired with AppendError calls.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104379
The idea is now that AppendError<...> will set eReturnStatusFailed
for you so you don't have to call SetStatus again.
Previously if the error message was empty, the status wouldn't
be set.
I don't think there are any sitautions where the message is in
fact empty but it potentially could be depending on where
we get the string from.
So let's set the status up front then return early if the message is empty.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104380
Clang 5 and Clang 6 can no longer parse newer versions of libc++. As we can't
specify the specific libc++ version in the decorator, let's only allow Clang
versions that can parse all currently available libc++ versions.
when dealing with -gmodules debug info.
This fixes the bot failures on Darwin.
A recent clang change (presumably https://reviews.llvm.org/D104291)
introduced a bug where .pcm files would identify themselves as
DW_LANG_C_plus_plus, but the .o that references them would identify as
DW_LANG_C_plus_plus_14. While that bug needs to be fixed, too, it
shows that the current strict comparison also isn't meaningful.
rdar://79423225
This test is using -gpubnames which is only available since Clang 8. The
original Clang 7 requirement was based on the availability of
-accel-tables=Dwarf (which the test initially used before being changed to
-gpubnames in commit 15a6df52ef ).
`vwprintw` is (in theory) using the `arargs.h` va_list while `vw_printw` is
using the `stdarg.h` va_list. It seems these days they can be used
interchangeably but `vwprintw` is marked as deprecated.
Instead dial it up explicitly.
This test started failing recently and I'm not sure why. It also
doesn't make sense to me the replacing "run" with "process launch -X 1 --"
should make any difference - run is an alias for the latter. But
it does pass with the change, and unless we are testing for the exact
run alias, it's better to ask for what we want explicitly.
This is an NFC cleanup.
Many of the API's that returned BreakpointOptions always returned valid ones.
Internally the BreakpointLocations usually have null BreakpointOptions, since they
use their owner's options until an option is set specifically on the location.
So the original code used pointers & unique_ptr everywhere for consistency.
But that made the code hard to reason about from the outside.
This patch changes the code so that everywhere an API is guaranteed to
return a non-null BreakpointOption, it returns it as a reference to make
that clear.
It also changes the Breakpoint to hold a BreakpointOption
member where it previously had a UP. Since we were always filling the UP
in the Breakpoint constructor, having the UP wasn't helping anything.
Differential Revision: https://reviews.llvm.org/D104162
This patch builds on D100521 and other related patches to add support
for unwinding stack on AArch64 systems with pointer authentication
feature enabled.
We override FixCodeAddress and FixDataAddress function in ABISysV_arm64
class. We now try to calculate and set code and data masks after reading
data_mask and code_mask registers exposed by AArch64 targets running Linux.
This patch utilizes core file linux-aarch64-pac.core for testing that
LLDB can successfully unwind stack frames in the presence of signed
return address after masking off ignored bits.
This patch also includes a AArch64 Linux native test case to demonstrate
successful back trace calculation in presence of pointer authentication
feature.
Differential Revision: https://reviews.llvm.org/D99944
DWARF doesn't describe templates itself but only actual template instantiations.
Because of that LLDB has to infer the parameters of the class template
declarations from the actual instantiations when creating the internal Clang AST
from debug info
Because there is no dedicated DIE for the class template, LLDB also creates the
`ClassTemplateDecl` implicitly when parsing a template instantiation. To avoid
creating one ClassTemplateDecls for every instantiation,
`TypeSystemClang::CreateClassTemplateDecl` will check if there is already a
`ClassTemplateDecl` in the requested `DeclContext` and will reuse a found
fitting declaration.
The logic that checks if a found class template fits to an instantiation is
currently just comparing the name of the template. So right now we map
`template<typename T> struct S;` to an instantiation with the values `S<1, 2,
3>` even though they clearly don't belong together.
This causes crashes later on when for example the Itanium mangler's
`TemplateArgManglingInfo::needExactType` method tries to find fitting the class
template parameter that fits to an instantiation value. In the example above it
will try to find the parameter for the value `2` but will just trigger a
boundary check when retrieving the parameter with index 1 from the class
template.
There are two ways we can end up with an instantiation that doesn't fit to a
class template with the same name:
1. We have two TUs with two templates that have the same name and internal
linkage.
2. A forward declared template instantiation is emitted by GCC and Clang
without an empty list of parameter values.
This patch makes the check for whether a class template declaration can be
reused more sophisticated by also comparing whether the parameter values can fit
to the found class template. If we can't find a fitting class template we
justcreate a second class template with the fitting parameters.
Fixes rdar://76592821
Reviewed By: kastiglione
Differential Revision: https://reviews.llvm.org/D100662
libstdc++ since version 11 has a conditional compilation based on
[[no_unique_address]] availability whether one element is either
inherited or put there as a field with [[no_unique_address]].
The code comment is by teemperor.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104283
One nice feature of the os_signpost API is that format string
substitutions happen in the consumer, not the logging
application. LLVM's current Signpost class doesn't take advantage of
this though and instead always uses a static "Begin/End %s" format
string.
This patch uses variadic macros to allow the API to be used as
intended. Unfortunately, the primary use-case I had in mind (the
LLDB_SCOPED_TIMER() macro) does not get much better from this, because
__PRETTY_FUNCTION__ is *not* a macro, but a static string, so
signposts created by LLDB_SCOPED_TIMER() still use a static "%s"
format string. At least LLDB_SCOPED_TIMERF() works as intended.
This reapplies the previously reverted patch with additional include
order fixes for non-modular builds of LLDB.
Differential Revision: https://reviews.llvm.org/D103575
One nice feature of the os_signpost API is that format string
substitutions happen in the consumer, not the logging
application. LLVM's current Signpost class doesn't take advantage of
this though and instead always uses a static "Begin/End %s" format
string.
This patch uses variadic macros to allow the API to be used as
intended. Unfortunately, the primary use-case I had in mind (the
LLDB_SCOPED_TIMER() macro) does not get much better from this, because
__PRETTY_FUNCTION__ is *not* a macro, but a static string, so
signposts created by LLDB_SCOPED_TIMER() still use a static "%s"
format string. At least LLDB_SCOPED_TIMERF() works as intended.
This reapplies the previsously reverted patch with additional MachO.h
macro #undefs.
Differential Revision: https://reviews.llvm.org/D103575
This documents the behaviour of the different SBType functions with notes for
the language-specific behaviour for C/C++/Objective-C. All of this reflects the
current behaviour of LLDB (even though that also means some functions behave
kinda weird but at least they are now documented to be weird)
Reviewed By: #lldb, mib
Differential Revision: https://reviews.llvm.org/D103454
Raphael Isemann