We were not checking that attributes that are supposed to be specific to
dummy arguments were not being used for local entities. I added the checks
along with tests for them.
After implementing these new checks, I found that one of the tests in
separate-mp02.f90 was erroneous, and I fixed it.
Differential Revision: https://reviews.llvm.org/D101126
When generating output for `-fdebug-dump-symbols`, make sure that
BuildRuntimeDerivedTypeTables is also run. This change is needed in
order to make the implementation of `-fdebug-dump-symbols` in
`flang-new` consistent with `f18`. It also allows us to port more tests
to use the new driver whenever it is enabled.
Differential Revision: https://reviews.llvm.org/D100649
This patch updates the final test that can be shared between the old and
the new Flang drivers and that has not been ported yet. %f18 (always
expanded as `f18`) is replaced with %flang_fc1 (expanded as either `f18`
or `flang-new -fc1`, depending on `FLANG_BUILD_NEW_DRIVER`).
This test should've been updated in https://reviews.llvm.org/D100309,
but I missed it then. That's because this test contains non-ascii
characters and `grep -I %f18` (as well as other grep-like tools) skips
it because it's interpreted as a data/binary file. In fact, it's just a
text file with non-ascii chars.
Since this is an obvious omission from D100309 (reviewed, accepted and
merged), I'm sending this without a review to reduce the noise on
Phabricator.
The single source file reduction.cpp is a little large in
terms of both source lines and generated text bytes, so
split SUM, PRODUCT, FINDLOC, and MAXLOC/MAXVAL/MINLOC/MINVAL
off into their own C++ source files that share a set of
implementation function templates now in a common header.
Differential Revision: https://reviews.llvm.org/D101111
Switching from `%f18` to `%flang_fc1` in LIT tests added in
https://reviews.llvm.org/D91159. This way these tests are run with the
new driver, `flang-new`, when enabled (i.e. when
`FLANG_BUILD_NEW_DRIVER` is set).
Differential Revision: https://reviews.llvm.org/D101078
Andrezj W. @ Arm discovered that the runtime derived type table
building code in semantics was detecting fatal errors in the tests
that the f18 driver wasn't printing. This patch fixes f18 so that
these messages are printed; however, the messages were not valid user
errors, and the rest of this patch fixes them up.
There were two sources of the bogus errors. One was that the runtime
derived type information table builder was calculating the shapes of
allocatable and pointer array components in derived types, and then
complaining that they weren't constant or LEN parameter values, which
of course they couldn't be since they have to have deferred shapes
and those bounds were expressions like LBOUND(component,dim=1).
The second was that f18 was forwarding the actual LEN type parameter
expressions of a type instantiation too far into the uses of those
parameters in various expressions in the declarations of components;
when an actual LEN type parameter is not a constant value, it needs
to remain a "bare" type parameter inquiry so that it will be lowered
to a descriptor inquiry and acquire a captured expression value.
Fixing this up properly involved: moving some code into new utility
function templates in Evaluate/tools.h, tweaking the rewriting of
conversions in expression folding to elide needless integer kind
conversions of type parameter inquiries, making type parameter
inquiry folding *not* replace bare LEN type parameters with
non-constant actual parameter values, and cleaning up some
altered test results.
Differential Revision: https://reviews.llvm.org/D101001
This patch adds semantic checks for the General Restrictions of the
Allocate Directive.
Since the requires directive is not yet implemented in Flang, the
restriction:
```
allocate directives that appear in a target region must
specify an allocator clause unless a requires directive with the
dynamic_allocators clause is present in the same compilation unit
```
will need to be updated at a later time.
A different patch will be made with the Fortran specific restrictions of
this directive.
I have used the code from https://reviews.llvm.org/D89395 for the
CheckObjectListStructure function.
Co-authored-by: Isaac Perry <isaac.perry@arm.com>
Reviewed By: clementval, kiranchandramohan
Differential Revision: https://reviews.llvm.org/D91159
We were erroneously not taking into account the constant values of LEN type
parameters of parameterized derived types when checking for argument
compatibility. The required checks are identical to those for assignment
compatibility. Since argument compatibility is checked in .../lib/Evaluate and
assignment compatibility is checked in .../lib/Semantics, I moved the common
code into .../lib/Evaluate/tools.cpp and changed the assignment compatibility
checking code to call it.
After implementing these new checks, tests in resolve53.f90 were failing
because the tests were erroneous. I fixed these tests and added new tests
to call03.f90 to test argument passing of parameterized derived types more
completely.
Differential Revision: https://reviews.llvm.org/D100989
This patch adds `-fget-definition` to `flang-new`. The semantics of this
option are identical in both drivers. The error message in the
"throwaway" driver is updated so that it matches the one from
`flang-new` (which is auto-generated and cannot be changed easily).
Tests are updated accordingly. A dedicated test for error handling was
added: get-definition.f90 (for the sake of simplicity,
getdefinition01.f90 no longer tests for errors).
The `ParseFrontendArgs` function is updated so that it can return
errors. This change is required in order to report invalid values
following `-fget-definition`.
The actual implementation of `GetDefinitionAction::ExecuteAction()` was
extracted from f18.cpp (i.e. the bit that deals with
`-fget-definition`).
Depends on: https://reviews.llvm.org/D100556
Differential Revision: https://reviews.llvm.org/D100558
We were erroneously emitting error messages for assignments of derived types
where the associated objects were instantiated with non-constant LEN type
parameters.
I fixed this by adding the member function MightBeAssignmentCompatibleWith() to
the class DerivedTypeSpec and calling it to determine whether it's possible
that objects of parameterized derived types can be assigned to each other. Its
implementation first compares the uninstantiated values of the types. If they
are equal, it then compares the values of the constant instantiated type
parameters.
I added tests to assign04.f90 to exercise this new code.
Differential Revision: https://reviews.llvm.org/D100868
Define APIs for, and implement, these three more recently-introduced
standard reduction transformational intrinsic functions to the runtime.
Differential Revision: https://reviews.llvm.org/D100863
This is just a small update that makes sure that errors arising from
parsing command-line options are captured more visibly. Also, all
parsing methods will now consistently return either a bool ("may fail")
or void ("never fails").
An instance of `InputKind` coming from `-x` is added to
`FrontendOptions` rather then being returned from `ParseFrontendArgs`.
It's currently not used, but we will require it shortly. In particular,
once code-generation is available we will use it to differentiate
between LLVM IR and Fortran input. `FrontendOptions` is a very suitable
place to keep it.
This changes don't affect the error reporting in the driver. In this
respect these are non-functional-changes. However, it will simplify
things in the forthcoming patches in which we may need a better error
tracking/recovery mechanism.
Differential Revision: https://reviews.llvm.org/D100556
This is similar to https://reviews.llvm.org/D100309, i.e. `%f18` is
replaced with `%flang_new`.
resolve105.f90 wasn't in tree when D100309 was worked on, so it's
updated here instead.
label14.f90 requires `-fsyntax-only`. I didn't notice that when
submitting D100309, hence updating it now instead. `-fsyntax-only` is
required to prevent `%f18` from calling an external compiler (which then
fails and returns a non-zero exit code).
Differential Revision: https://reviews.llvm.org/D100655
This patch updates most of the remaining regression tests (~400) to use
`flang-new` rather then `f18` when `FLANG_BUILD_NEW_DRIVER` is set.
This allows us to share more Flang regression tests between `f18` and
`flang-new`. A handful of tests have not been ported yet - these are
currently either failing or not supported by the new driver.
Summary of changes:
* RUN lines in tests are updated to use `%flang_fc1` instead of `%f18`
* option spellings in tests are updated to forms accepted by both `f18` and
`flang-new`
* variables in Bash scripts are renamed (e.g. F18 --> FLANG_FC1)
The updated tests will now be run with the new driver, `flang-new`,
whenever it is enabled (i.e when `FLANG_BUILD_NEW_DRIVER` is set).
Although this patch touches many files, vast majority of the changes are
automatic:
```
grep -IEZlr "%f18" flang/test/ | xargs -0 -l sed -i 's/%f18/%flang_fc1/g
```
Differential Revision: https://reviews.llvm.org/D100309
An empty NAME= should mean that there is no C binding, not the
binding that would result from BIND(C) without a NAME=.
See 18.10.2p2.
Differential Revision: https://reviews.llvm.org/D100494
Two sites in io-api.cpp pass the wrong Boolean flag value to
signify that a new anonymous unit is a formatted file.
Differential Revision: https://reviews.llvm.org/D100419
Debug the input path for READ statements with END= labels;
don't emit errors when the program can handle them.
BeginReadingRecord() member functions have been made
"bool" for more convenient handling of error cases,
and some code in IoErrorHandler has been cleaned up.
Differential Revision: https://reviews.llvm.org/D100421
An OPEN statement that affects an already connected unit
without changing its external file is required to have
STATUS="OLD" or default STATUS=. The code was eliciting
spurious runtime errors in situations where an OPEN statement
pertained to an existing unit number but did not need to have
STATUS="OLD'.
Differential Revision: https://reviews.llvm.org/D100352
We were not instantiating procedure pointer components. If the instantiation
contained errors, we were not reporting them. This resulted in internal errors
in later processing.
I fixed this by adding code in .../lib/Semantics/type.cpp in
InstantiateComponent() to handle a component with ProcEntityDetails. I also
added several tests for various good and bad instantiations of procedure
pointer components.
Differential Revision: https://reviews.llvm.org/D100341
`%flang-new` was introduced in the early days of the new driver to make
a clear distinction between the tests for the current and the new
driver. We have since introduced `%flang` (compiler driver) and
`%flang_fc1` (frontend driver) as the long term solution. This has allowed
us to share tests between `flang-new` and `f18`. This patch replaces
all uses of `%flang-new` with `%flang` and `%flang_fc1`.
Some tests are reformatted so that all tests look uniform and are easier
to follow. Where possible, `! REQUIRES: new-flang-driver` is deleted so
that more tests can be shared with `f18`. To facilitate this,
`f{no-}implicit-none` are introduced in `f18` with semantics identical
to `flang-new`.
Two tests are deleted rather than updated:
* flang/test/Frontend/print-preprocess-C-file.f90
* flang/test/Frontend/print-preprocessed-file.f90
Instead, there is plenty of preprocessor tests in
flang/test/Preprocessing/.
Differential Revision: https://reviews.llvm.org/D100174
With the typo ($S instead of %s), the driver was expecting
input from stdin. In such cases, it prints:
```
Enter Fortran source
Use EOF character (^D) to end file
```
This was piped to FileCheck. Together with the available `CHECK-NOT`
statement, this was sufficient for the test to pass (incorrectly).
This patch makes sure that the provided input file is used instead of
stdin.
Differential Revision: https://reviews.llvm.org/D100301
F18 is using the type codes for C's "least" int types to encode
the various kinds of Fortran's LOGICAL intrinsic type; update
the IsLogical() predicate accordingly. (This member function
isn't yet used anywhere, so this patch is nearly an NFC.)
Differential Revision: https://reviews.llvm.org/D100323
With clang 11 on macos we were getting this warning:
```
flang/runtime/random.cpp:61:30: error: non-constant-expression cannot be narrowed from type 'unsigned long long' to 'runtime::GeneratedWord' (aka 'unsigned int') in initializer list [-Wc++11-narrowing]
GeneratedWord word{(generator() - generator.min()) & rangeMask};
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flang/runtime/random.cpp:99:5: note: in instantiation of function template specialization 'runtime::Generate<double, 53>' requested here
Generate<CppTypeFor<TypeCategory::Real, 8>, 53>(harvest);
^
```
Changing the type of `rangeMask` fixes it.
Differential Revision: https://reviews.llvm.org/D100320
F18 supports the standard intrinsic function SELECTED_REAL_KIND
but not its synonym in the standard module IEEE_ARITHMETIC
named IEEE_SELECTED_REAL_KIND until this patch.
Differential Revision: https://reviews.llvm.org/D100066
Add APIs, initial non-coarray implementations, and unit
tests for the intrinsic subroutines for pseudo-random
number generation.
Differential Revision: https://reviews.llvm.org/D100064
For pernicious test cases with explicit non-constant actual
type parameter expressions in components, e.g.:
type :: t(k)
integer, kind :: k
type(t(k+1)), pointer :: p
end type
we should detect the infinite recursion and complain rather
than looping until the stack overflows.
Differential Revision: https://reviews.llvm.org/D100065
Check for two or more symbols that define a data object or entry point
with the same interoperable BIND(C) name.
Differential Revision: https://reviews.llvm.org/D100067
Call static functions using the class name (fir::NameUniquer).
Add function for mangling derivedTypes.
All the name mangling functions that are ultimately called are
tested in unittests/Optimizer/InternalNamesTest.cpp.
Differential Revision: https://reviews.llvm.org/D99967
This patch adds two debugging options in the new Flang driver
(flang-new):
*fdebug-unparse-no-sema
*fdebug-dump-parse-tree-no-sema
Each of these options combines two options from the "throwaway" driver
(left: f18, right: flang-new):
* `-fdebug-uparse -fdebug-no-semantics` --> `-fdebug-unparse-no-sema`
* `-fdebug-dump-parse-tree -fdebug-no-semantics` -->
`-fdebug-dump-parse-tree-no-sema`
There are no plans to implement `-fdebug-no-semantics` in the new
driver. Such option would be too powerful. Also, it would only make
sense when combined with specific frontend actions (`-fdebug-unparse`
and `-fdebug-dump-parse-tree`). Instead, this patch adds 2 specialised
options listed above. Each of these is implemented through a dedicated
FrontendAction (also added).
The new frontend actions are implemented in terms of a new abstract base
action: `PrescanAndSemaAction`. This new base class was required so that
we can have finer control over what steps within the frontend are
executed:
* `PrescanAction`: run the _prescanner_
* `PrescanAndSemaAction`: run the _prescanner_ and the _parser_ (new
in this patch)
* `PrescanAndSemaAction`: run the _prescanner_, _parser_ and run the
_semantic checks_
This patch introduces `PrescanAndParseAction::BeginSourceFileAction`.
Apart from the semantic checks removed at the end, it is similar to
`PrescanAndSemaAction::BeginSourceFileAction`.
Differential Revision: https://reviews.llvm.org/D99645
The -fdebug-dump-provenance flag is meant to be used with
needProvenanceRangeToCharBlockMappings set to true. This way, extra
mapping is generated that allows e.g. IDEs to retrieve symbol's scope
(offset into cooked character stream) based on symbol's source code
location. This patch makes sure that this option is set when using
-fdebug-dump-provenance.
With this patch, the implementation of -fdebug-dump-provenance in
`flang-new -fc1` becomes consistent with `f18`. The corresponding LIT
test is updated so that it can be shared with `f18`. I refined it a bit
so that:
* it becomes a frontend-only test
* it's stricter about the expected output
Differential Revision: https://reviews.llvm.org/D98847
This patch adds support for the `-cpp` and `-nocpp` flags. The
implemented semantics match f18 (i.e. the "throwaway" driver), but are
different to gfortran. In Flang the preprocessor is always run. Instead,
`-cpp/-nocpp` are used to control whether predefined and command-line
preprocessor macro definitions are enabled or not. In practice this is
sufficient to model gfortran`s `-cpp/-nocpp`.
In the absence of `-cpp/-nocpp`, the driver will use the extension of
the input file to decide whether to include the standard macro
predefinitions. gfortran's documentation [1] was used to decide which
file extension to use for this.
The logic mentioned above was added in FrontendAction::BeginSourceFile.
That's relatively late in the driver set-up, but this roughly where the
name of the input file becomes available. The logic for deciding between
fixed and free form works in a similar way and was also moved to
FrontendAction::BeginSourceFile for consistency (and to reduce
code-duplication).
The `-cpp/-nocpp` flags are respected also when the input is read from
stdin. This is different to:
* gfortran (behaves as if `-cpp` was used)
* f18 (behaves as if `-nocpp` was used)
Starting with this patch, file extensions are significant and some test
files had to be renamed to reflect that. Where possible, preprocessor
tests were updated so that they can be shared between `f18` and
`flang-new`. This was implemented on top of adding new test for
`-cpp/-nocpp`.
[1] https://gcc.gnu.org/onlinedocs/gcc/Overall-Options.html
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D99292
We were not folding type parameter inquiries for the form 'var%typeParam'
where 'typeParam' was a KIND or LEN type parameter of a derived type and 'var'
was a designator of the derived type. I fixed this by adding code to the
function 'FoldOperation()' for 'TypeParamInquiry's to handle this case. I also
cleaned up the code for the case where there is no designator.
In order to make the error messages correctly refer to both the points of
declaration and instantiation, I needed to add an argument to the function
'InstantiateIntrinsicType()' for the location of the instantiation.
I also changed the formatting of 'TypeParamInquiry' to correctly format this
case. I also added tests for both KIND and LEN type parameter inquiries in
resolve104.f90.
Making these changes revealed an error in resolve89.f90 and caused one of the
error messages in assign04.f90 to be different.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D99892
Problem:
On SystemZ we need to open text files in text mode. On Windows, files opened in text mode adds a CRLF '\r\n' which may not be desirable.
Solution:
This patch adds two new flags
- OF_CRLF which indicates that CRLF translation is used.
- OF_TextWithCRLF = OF_Text | OF_CRLF indicates that the file is text and uses CRLF translation.
Developers should now use either the OF_Text or OF_TextWithCRLF for text files and OF_None for binary files. If the developer doesn't want carriage returns on Windows, they should use OF_Text, if they do want carriage returns on Windows, they should use OF_TextWithCRLF.
So this is the behaviour per platform with my patch:
z/OS:
OF_None: open in binary mode
OF_Text : open in text mode
OF_TextWithCRLF: open in text mode
Windows:
OF_None: open file with no carriage return
OF_Text: open file with no carriage return
OF_TextWithCRLF: open file with carriage return
The Major change is in llvm/lib/Support/Windows/Path.inc to only set text mode if the OF_CRLF is set.
```
if (Flags & OF_CRLF)
CrtOpenFlags |= _O_TEXT;
```
These following files are the ones that still use OF_Text which I left unchanged. I modified all these except raw_ostream.cpp in recent patches so I know these were previously in Binary mode on Windows.
./llvm/lib/Support/raw_ostream.cpp
./llvm/lib/TableGen/Main.cpp
./llvm/tools/dsymutil/DwarfLinkerForBinary.cpp
./llvm/unittests/Support/Path.cpp
./clang/lib/StaticAnalyzer/Core/HTMLDiagnostics.cpp
./clang/lib/Frontend/CompilerInstance.cpp
./clang/lib/Driver/Driver.cpp
./clang/lib/Driver/ToolChains/Clang.cpp
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99426
We were not folding type parameter inquiries for the form 'var%typeParam'
where 'typeParam' was a KIND or LEN type parameter of a derived type and 'var'
was a designator of the derived type. I fixed this by adding code to the
function 'FoldOperation()' for 'TypeParamInquiry's to handle this case. I also
cleaned up the code for the case where there is no designator.
In order to make the error messages correctly refer to both the points of
declaration and instantiation, I needed to add an argument to the function
'InstantiateIntrinsicType()' for the location of the instantiation.
I also changed the formatting of 'TypeParamInquiry' to correctly format this
case. I also added tests for both KIND and LEN type parameter inquiries in
resolve104.f90.
Making these changes revealed an error in resolve89.f90 and caused one of the
error messages in assign04.f90 to be different.
Differential Revision: https://reviews.llvm.org/D99892
Peter Steinfeld