load/store instructions defined. Previously, we were defining load/store
instructions for each pointer size (32 and 64-bit), but now we need just one
definition.
llvm-svn: 188830
* msa SubtargetFeature
* registers
* ld.[bhwd], and st.[bhwd] instructions
Does not correctly prohibit use of both 32-bit FPU registers and MSA together.
Patch by Daniel Sanders
llvm-svn: 188313
By default, a teq instruction is inserted after integer divide. No divide-by-zero
checks are performed if option "-mnocheck-zero-division" is used.
llvm-svn: 182306
This patch removes alias definition for addiu $rs,$imm
and instead uses the TwoOperandAliasConstraint field in
the ArithLogicI instruction class.
This way all instructions that inherit ArithLogicI class
have the same macro defined.
The usage examples are added to test files.
Patch by Vladimir Medic
llvm-svn: 182048
This patch adds bnez and beqz instructions which represent alias definitions for bne and beq instructions as follows:
bnez $rs,$imm => bne $rs,$zero,$imm
beqz $rs,$imm => beq $rs,$zero,$imm
The corresponding test cases are added.
Patch by Vladimir Medic
llvm-svn: 182040
This patch adds alias for addiu instruction which enables following syntax:
addiu $rs,imm
The macro is translated as:
addiu $rs,$rs,imm
Contributer: Vladimir Medic
llvm-svn: 181729
Expand copy instructions between two accumulator registers before callee-saved
scan is done. Handle copies between integer GPR and hi/lo registers in
MipsSEInstrInfo::copyPhysReg. Delete pseudo-copy instructions that are not
needed.
llvm-svn: 180827
This patch adds support for recoded (meaning assembly-language compatible to
standard mips32) arithmetic 32-bit instructions.
Patch by Zoran Jovanovic.
llvm-svn: 179873
The new instructions have explicit register output operands and use table-gen
patterns instead of C++ code to do instruction selection.
Mips16's instructions are unaffected by this change.
llvm-svn: 178403
Mips assembler supports macros that allows the OR instruction
to have an immediate parameter. This patch adds an instruction
alias that converts this macro into a Mips ORI instruction.
Contributer: Vladimir Medic
llvm-svn: 178316
Mips assembler allows following to be used as aliased instructions:
jal $rs for jalr $rs
jal $rd,$rd for jalr $rd,$rs
This patch provides alias definitions in td files and test cases to show the usage.
Contributer: Vladimir Medic
llvm-svn: 178304
This patch uses the generated instruction info tables to
identify memory/load store instructions.
After successful matching and based on the operand type
and size, it generates additional instructions to the output.
Contributor: Vladimir Medic
llvm-svn: 177685
This patch eliminates the need to emit a constant move instruction when this
pattern is matched:
(select (setgt a, Constant), T, F)
The pattern above effectively turns into this:
(conditional-move (setlt a, Constant + 1), F, T)
llvm-svn: 176384
functions. Set AddedComplexity to determine the order in which patterns are
matched.
This simplifies selection of floating point loads/stores.
No functionality change intended.
llvm-svn: 175300
same so we put in the comment field an indicator when we think we are
emitting the 16 bit version. For the direct object emitter, the difference is
important as well as for other passes which need an accurate count of
program size. There will be other similar putbacks to this for various
instructions.
llvm-svn: 174747
and enables the instruction printer to print aliased
instructions.
Due to usage of RegisterOperands a change in common
code (utils/TableGen/AsmWriterEmitter.cpp) is required
to get the correct register value if it is a RegisterOperand.
Contributer: Vladimir Medic
llvm-svn: 174358
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Formatting fixes. Mostly long lines and
blank spaces at end of lines.
Contributer: Jack Carter
llvm-svn: 172882
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Removal of redundant code and formatting fixes.
Contributers: Jack Carter/Vladimir Medic
llvm-svn: 172842
register names in the standalone assembler llvm-mc.
Registers such as $A1 can represent either a 32 or
64 bit register based on the instruction using it.
In addition, based on the abi, $T0 can represent different
32 bit registers.
The problem is resolved by the Mips specific AsmParser
td definitions changing to work together. Many cases of
RegisterClass parameters are now RegisterOperand.
Contributer: Vladimir Medic
llvm-svn: 172284
This patch provides initial implementation of load address
macro instruction for Mips. We have implemented two kinds
of expansions with their variations depending on the size
of immediate operand:
1) load address with immediate value directly:
* la d,j => addiu d,$zero,j (for -32768 <= j <= 65535)
* la d,j => lui d,hi16(j)
ori d,d,lo16(j) (for any other 32 bit value of j)
2) load load address with register offset value
* la d,j(s) => addiu d,s,j (for -32768 <= j <= 65535)
* la d,j(s) => lui d,hi16(j) (for any other 32 bit value of j)
ori d,d,lo16(j)
addu d,d,s
This patch does not cover the case when the address is loaded
from the value of the label or function.
Contributer: Vladimir Medic
llvm-svn: 165561
macro instruction (li) in the assembler.
We have identified three possible expansions depending on
the size of immediate operand:
1) for 0 ≤ j ≤ 65535.
li d,j =>
ori d,$zero,j
2) for −32768 ≤ j < 0.
li d,j =>
addiu d,$zero,j
3) for any other value of j that is representable as a 32-bit integer.
li d,j =>
lui d,hi16(j)
ori d,d,lo16(j)
All of the above have been implemented in ths patch.
Contributer: Vladimir Medic
llvm-svn: 165199
use load/store fragments defined in TargetSelectionDAG.td in place of them.
Unaligned loads/stores are either expanded or lowered to target-specific nodes,
so instruction selection should see only aligned load/store nodes.
No changes in functionality.
llvm-svn: 163960
The assembler can alias one instruction into another based
on the operands. For example the jump instruction "J" takes
and immediate operand, but if the operand is a register the
assembler will change it into a jump register "JR" instruction.
These changes are in the instruction td file.
Test cases included
Contributer: Vladimir Medic
llvm-svn: 163368
were using a class defined for 32 bit instructions and
thus the instruction was for addiu instead of daddiu.
This was corrected by adding the instruction opcode as a
field in the base class to be filled in by the defs.
llvm-svn: 161359
This pass no longer requires that the global pointer value be saved to the
stack or register since it uses bal instruction to compute branch distance.
llvm-svn: 160601
Call instructions are no longer required to be variadic, and
variable_ops should only be used for instructions that encode a variable
number of arguments, like the ARM stm/ldm instructions.
llvm-svn: 160189
It takes advantage of r159299 which introduces relocation support for N64.
elf-dump needed to be upgraded to support N64 relocations as well.
This passes make check.
Jack
llvm-svn: 159302
instruction encodings can be excluded during mips16 processing.
This revision fixes the issue raised by Jim Grosbach.
bool hasStandardEncoding() const { return !inMips16Mode(); }
When micromips is added it will be
bool StandardEncoding() const { return !inMips16Mode()&& !inMicroMipsMode(); }
No additional testing is needed other than to assure that there is no regression
from this patch.
Patch by Reed Kotler.
llvm-svn: 157234
them as machine instructions. Directives ".set noat" and ".set at" are now
emitted only at the beginning and end of a function except in the case where
they are emitted to enclose .cpload with an immediate operand that doesn't fit
in 16-bit field or unaligned load/stores.
Also, make the following changes:
- Remove function isUnalignedLoadStore and use a switch-case statement to
determine whether an instruction is an unaligned load or store.
- Define helper function CreateMCInst which generates an instance of an MCInst
from an opcode and a list of operands.
llvm-svn: 153552
reserving a physical register ($gp or $28) for that purpose.
This will completely eliminate loads that restore the value of $gp after every
function call, if the register allocator assigns a callee-saved register, or
eliminate unnecessary loads if it assigns a temporary register.
example:
.cpload $25 // set $gp.
...
.cprestore 16 // store $gp to stack slot 16($sp).
...
jalr $25 // function call. clobbers $gp.
lw $gp, 16($sp) // not emitted if callee-saved reg is chosen.
...
lw $2, 4($gp)
...
jalr $25 // function call.
lw $gp, 16($sp) // not emitted if $gp is not live after this instruction.
...
llvm-svn: 151402
versions derive from them.
- JALR64 is not needed since N64 does not emit jal.
- Add template parameter to BranchLink that sets the rt field.
- Fix the set of temporary registers for O32 and N64.
llvm-svn: 147518
instruction supported by mips32r2, and add a pattern which replaces bswap with
a ROTR and WSBH pair.
WSBW is removed since it is not an instruction the current architectures
support.
llvm-svn: 147015
- Modify lowering of global TLS address nodes.
- Modify isel of ThreadPointer.
- Wrap target global TLS address nodes that are operands of loads with WrapperPIC.
- Remove Mips-specific DAG nodes TlsGd, TprelHi and TprelLo, which can be
substituted with other existing nodes.
llvm-svn: 146175
- lower unaligned loads/stores.
- encode the size operand of instructions INS and EXT.
- emit relocation information needed for JAL (jump-and-link).
llvm-svn: 145113
"With this patch we can now generate runnable Mips code through LLVM
direct object emission. We have run numerous simple programs, both C
and C++ and with -O0 and -O3 from the output. The code is not production
ready, but quite useful for experimentation." Patch and message by
Jack Carter
llvm-svn: 144414
-Fix binary codes and rename operands in .td files so that automatically
generated function MipsCodeEmitter::getBinaryCodeForInstr gives correct
encoding for instructions.
-Define new class FMem for instructions that access memory.
-Define new class FFRGPR for instructions that move data between GPR and
FPU general and control registers.
-Define custom encoder methods for memory operands, and also for size
operands of ext and ins instructions.
-Only static relocation model is currently implemented.
Patch by Sasa Stankovic
llvm-svn: 142378
Robert Wilhelm