There is a lot more we can do, in particular in <type_traits>, but this
removes some workarounds that were gated on checking a specific compiler
version.
Differential Revision: https://reviews.llvm.org/D108923
Previous "simplify scan_eh_tab" patch, https://reviews.llvm.org/D93190,
saves landingpad if and only if the target is not using SjLj exceptions.
However, the landingpad is used by SjLj exception handler also. This
patch changes to set landingpad for both exception handlers.
Differential Revision: https://reviews.llvm.org/D108082
I'm about to submit a change which involves re-writing most of
cxa_guard_impl.h. Running clang-format on the whole file first seems like a
good idea.
Reviewed By: ldionne, #libc_abi
Differential Revision: https://reviews.llvm.org/D108231
A libfuzzer run has discovered some inputs for which the demangler does
not terminate. When minimized, it looks like this: _Zcv1BIRT_EIS1_E
Deciphered:
_Z
cv - conversion operator
* result type
1B - "B"
I - template args begin
R - reference type <.
T_ - forward template reference | *
E - template args end | |
| |
* parameter type | |
I - template args begin | |
S1_ - substitution #1 * <'
E - template args end
The reason is: template-parameter refs in conversion operator result type
create forward-references, while substitutions are instantly resolved via
back-references. Together these can create a reference loop. It causes an
infinite loop in ReferenceType::collapse().
I see three possible ways to avoid these loops:
1. check if resolving a forward reference creates a loop and reject the
invalid input (hard to traverse AST at this point)
2. check if a substitution contains a malicious forward reference and
reject the invalid input (hard to traverse AST at this point;
substitutions are quite common: may affect performance; hard to
clearly detect loops at this point)
3. detect loops in ReferenceType::collapse() (cannot reject the input)
This patch implements (3) as seemingly the least-impact change. As a
side effect, such invalid input strings are not rejected and produce
garbage, however there are already similar guards in
`if (Printing) return;` checks.
Fixes https://llvm.org/PR51407
Differential Revision: https://reviews.llvm.org/D107712
Since we officially don't support several older compilers now, we can
drop a lot of the markup in the test suite. This helps keep the test
suite simple and makes sure that UNSUPPORTED annotations don't rot.
This is the first patch of a series that will remove annotations for
compilers that are now unsupported.
Differential Revision: https://reviews.llvm.org/D107787
_Unwind_ForcedUnwind is not mandated by the EHABI but for compatibilty
reasons adding so the interface to higher layers would be the same.
Dropping EHABI specific _Unwind_Stop_Fn definition since it is not defined by EHABI.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D89570
Building the libraries with -fPIC ensures that we can link an executable
against the static libraries with -fPIE. Furthermore, there is apparently
basically no downside to building the libraries with position independent
code, since modern toolchains are sufficiently clever.
This commit enforces that we always build the runtime libraries with -fPIC.
This is another take on D104327, which instead makes the decision of whether
to build with -fPIC or not to the build script that drives the runtimes'
build.
Fixes http://llvm.org/PR43604.
Differential Revision: https://reviews.llvm.org/D104328
This is a NFC commit to normalize how we set target properties on the
various runtime targets. A follow-up patch is going to add new properties,
and I wanted that follow-up patch to be cleaner.
Instead of using TARGET_TRIPLE, which is always set to LLVM_DEFAULT_TARGET_TRIPLE,
use that variable directly to populate the various XXXX_TARGET_TRIPLE
variables in the runtimes.
This re-applies 77396bbc98 and 5099e01568, which were reverted in
850b57c5fb because they broke the build.
Differential Revision: https://reviews.llvm.org/D106009
This configuration is interesting because GCC has a different level of
strictness for some C++ rules. In particular, it implements the older
standards more stringently than Clang, which can help find places where
we are non-conforming (especially in the test suite).
Differential Revision: https://reviews.llvm.org/D105936
When a target triple is specified in CMake via XXX_TARGET_TRIPLE, we tried
passing the --target=<...> flag to the compiler. However, not all compilers
support that flag (e.g. GCC, which is not a cross-compiler). As a result,
setting e.g. LIBCXX_TARGET_TRIPLE=<host-triple> would end up trying to
pass --target=<host-triple> to GCC, which breaks everything because the
flag isn't even supported.
This commit only adds `--target=<...>` & friends to the flags if it is
supported by the compiler.
One could argue that it's confusing to pass LIBCXX_TARGET_TRIPLE=<...>
and have it be ignored. That's correct, and one possibility would be
to assert that the requested triple is the same as the host triple when
we know the compiler is unable to cross-compile. However, note that this
is a pre-existing issue (setting the TARGET_TRIPLE variable never had an
influence on the flags passed to the compiler), and also fixing that is
starting to look like reimplementing a lot of CMake logic that is already
handled with CMAKE_CXX_COMPILER_TARGET.
Differential Revision: https://reviews.llvm.org/D106082
The feature was always defined, which means that the two test cases
guarded by it were never run.
Differential Revision: https://reviews.llvm.org/D106062
add_lit_testsuite() takes Lit parameters passed to it and adds them
to the parameters used globally when running all test suites. That
means that a target like `check-all`, which ends up calling Lit on
the whole monorepo, will see the test parameters for all the individual
project's test suites.
So, for example, it would see `--param std=c++03` (from libc++abi), and
`--param std=c++03` (from libc++), and `--param whatever` (from another
project being tested at the same time). While always unclean, that works
when the parameters all agree. However, if the parameters share the same
name but have different values, only one of those two values will be used
and it will be incredibly confusing to understand why one of the test
suites is being run with the incorrect parameter value.
For that reason, this commit moves away from using add_lit_testsuite()'s
PARAM functionality, and serializes the parameter values for the runtimes
in the generated config.py file instead, which is local to the specific
test suite.
Differential Revision: https://reviews.llvm.org/D105991
This commit reverts 5099e01568 and 77396bbc98, which broke the build
in various ways. I'm reverting until I can investigate, since that
change appears to be way more subtle than it seemed.
This is a second attempt at D101497, which landed as
9a9bc76c0e but had to be reverted in
8cf7ddbdd4.
This issue was that in the case that `COMPILER_RT_INSTALL_PATH` is
empty, expressions like "${COMPILER_RT_INSTALL_PATH}/bin" evaluated to
"/bin" not "bin" as intended and as was originally.
One solution is to make `COMPILER_RT_INSTALL_PATH` always non-empty,
defaulting it to `CMAKE_INSTALL_PREFIX`. D99636 adopted that approach.
But, I think it is more ergonomic to allow those project-specific paths
to be relative the global ones. Also, making install paths absolute by
default inhibits the proper behavior of functions like
`GNUInstallDirs_get_absolute_install_dir` which make relative install
paths absolute in a more complicated way.
Given all this, I will define a function like the one asked for in
https://gitlab.kitware.com/cmake/cmake/-/issues/19568 (and needed for a
similar use-case).
---
Original message:
Instead of using `COMPILER_RT_INSTALL_PATH` through the CMake for
complier-rt, just use it to define variables for the subdirs which
themselves are used.
This preserves compatibility, but later on we might consider getting rid
of `COMPILER_RT_INSTALL_PATH` and just changing the defaults for the
subdir variables directly.
---
There was a seaming bug where the (non-Apple) per-target libdir was
`${target}` not `lib/${target}`. I suspect that has to do with the docs
on `COMPILER_RT_INSTALL_PATH` saying was the library dir when that's no
longer true, so I just went ahead and fixed it, allowing me to define
fewer and more sensible variables.
That last part should be the only behavior changes; everything else
should be a pure refactoring.
---
I added some documentation of these variables too. In particular, I
wanted to highlight the gotcha where `-DSomeCachePath=...` without the
`:PATH` will lead CMake to make the path absolute. See [1] for
discussion of the problem, and [2] for the brief official documentation
they added as a result.
[1]: https://cmake.org/pipermail/cmake/2015-March/060204.html
[2]: https://cmake.org/cmake/help/latest/manual/cmake.1.html#options
In 38b2dec37e the problem was somewhat
misidentified and so `:STRING` was used, but `:PATH` is better as it
sets the correct type from the get-go.
---
D99484 is the main thrust of the `GnuInstallDirs` work. Once this lands,
it should be feasible to follow both of these up with a simple patch for
compiler-rt analogous to the one for libcxx.
Reviewed By: phosek, #libc_abi, #libunwind
Differential Revision: https://reviews.llvm.org/D105765
This is necessary for from-scratch configurations to support the 32-bit
mode of the test suite.
Differential Revision: https://reviews.llvm.org/D105435
Now that Lit supports regular expressions inside XFAIL & friends, it is
much easier to write Lit annotations based on the triple.
Differential Revision: https://reviews.llvm.org/D104747
Before this patch, Lit parameters that were set as a result of CMake
options were not made available to from-scratch configs. This patch
serializes those parameters into the generated lit config file so that
they are available to all configs.
Differential Revision: https://reviews.llvm.org/D105047
Summary:
This patch enables calculating relative addresses with the DW_EH_PE_datarel encoding using a 'base' for AIX. After setting registers for jumping to the user code in gxx_personality_v0(), 'base' is cached in exception_header member catchTemp for use in __cxa_call_unexpected if ttypeIndex is less than 0 (exception spec).
Reviewed by: MaskRay, sfertile, compnerd, libc++abi
Differential Revision: https://reviews.llvm.org/D101298
Also, fix the last issue that prevented GCC 11 from passing the test
suite. Thanks to everyone else who fixed issues.
Differential Revision: https://reviews.llvm.org/D104315
Summary:
A -Wunused-parameter warning was introduced by patch rG7f0244afa828 [libc++abi] NFC: adding a new parameter base to functions for calculating… (authored by xingxue). The unused parameter base will be used in a follow-on patch D101298. This patch is to avoid the warning before D101298 is landed.
Reviewers: ldionne, sfertile, compnerd, libc++abi
Reviewed by: ldionne
Differential Revision: https://reviews.llvm.org/D104235
Instead, people should be using CMAKE_POSITION_INDEPENDENT_CODE to control
whether they want to use PIC or not. We should try to avoid reinventing
the wheel whenever CMake natively supports something.
This makes libc++abi consistent with libc++ and libunwind.
Differential Revision: https://reviews.llvm.org/D103973
Summary:
This NFC patch adds a new parameter base to functions invoked by scan_eh_tab() for calculating the address of the encoding with a relative value. base defaults to 0. This is in preparation for the AIX implementation which uses the DW_EH_PE_datarel encoding.
Reviewed by: MaskRay, sfertile, compnerd, libc++abi
Differential Revision: https://reviews.llvm.org/D101545
This matches the fact that we build the experimental library by default.
Otherwise, by default we'd be building the library but not testing it,
which is inconsistent.
Differential Revision: https://reviews.llvm.org/D102109
This was changed from using the header to using a forward declaration in
c4600ccf89, since older versions of the header didn't declare the
function. At this point, it's been declared for ~3.5 years, and it
should be pretty safe to assume that we can rely on the ASan interface
header to provide a declaration instead of needing to write our own.
Reviewed By: #libc_abi, ldionne
Differential Revision: https://reviews.llvm.org/D103003
Now that we're passing -D_LIBCPP_BUILDING_LIBRARY to the libc++abi
build, -D_LIBCPP_ENABLE_CXX17_REMOVED_UNEXPECTED_FUNCTIONS is redundant
(fb3a00c327/libcxx/include/exception (L120-L121)
is the only use of _LIBCPP_ENABLE_CXX17_REMOVED_UNEXPECTED_FUNCTIONS in
libc++, and that conditional also checks for _LIBCPP_BUILDING_LIBRARY).
Reviewed By: #libc_abi, phosek
Differential Revision: https://reviews.llvm.org/D102372
This fixes a long standing issue where the triple is not always set
consistently in all configurations. This change also moves the
back-deployment Lit features to using the proper target triple
instead of using something ad-hoc.
This will be necessary for using from scratch Lit configuration files
in both normal testing and back-deployment testing.
Differential Revision: https://reviews.llvm.org/D102012
When using the per-target runtime build, it may be desirable to have
different __config_site headers for each target where all targets cannot
share a single configuration.
The layout used for libc++ headers after this change is:
```
include/
c++/
v1/
<libc++ headers except for __config_site>
<target1>/
c++/
v1/
__config_site
<target2>/
c++/
v1/
__config_site
<other targets>
```
This is the most optimal layout since it avoids duplication, the only
headers that's per-target is __config_site, all other headers are
shared across targets. This also means that we no need two
-isystem flags: one for the target-agnostic headers and one for
the target specific headers.
Differential Revision: https://reviews.llvm.org/D89013
The StringView::substr now accepts a substring starting position and its
length instead of previous non-standard `from` & `to` positions.
All uses of two argument StringView::substr are in MicrosoftDemangler
and have 0 as a starting position, so no changes are necessary.
This also fixes a bug where attempting to extract a suffix with substr
(a `to` position equal to size) would return a substring without the
last character.
Fixing the issue should not introduce observable changes in the
demangler, since as currently used, a second argument to
StringView::substr is either: 1) a result of a successful call to
StringView::find and so necessarily smaller than size., or 2) in the
case of Demangler::demangleCharLiteral potentially equal to size, but
with demangler expecting more data to follow later on and failing either
way.
Reviewed By: #libc_abi, ldionne, erik.pilkington
Differential Revision: https://reviews.llvm.org/D100246
The new layout more closely matches the layout used by other compilers.
This is only used when LLVM_ENABLE_PER_TARGET_RUNTIME_DIR is enabled.
Differential Revision: https://reviews.llvm.org/D100869
These variables were introduced during early work on the runtimes build
but were obsoleted by {LIBCXX,LIBCXXABI,LIBUNWIND}_INSTALL_LIBRARY_DIR.
Differential Revision: https://reviews.llvm.org/D99697
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
Differential Revision: https://reviews.llvm.org/D97572
This path would unblock the build of libc++ library on AIX:
1. Add _AIX guard for _LIBCPP_HAS_THREAD_API_PTHREAD
2. Use uselocale to actually take the locale setting
into account.
3. extract_mtime and extract_atime mod needed for AIX. As stat
structure on AIX uses internal structure st_timespec to store
time for binary compatibility reason. So we need to convert it
back to timespec here.
4. Do not build cxa_thread_atexit.cpp for libcxxabi on AIX.
Differential Revision: https://reviews.llvm.org/D97558
Louis Dionne