Discovered in SYCL, the field annotations were always cast to an i8*,
which is an invalid bitcast for a pointer type with an address space.
This patch makes sure that we create an intrinsic that takes a pointer
to the correct address-space and properly do our casts.
Differential Revision: https://reviews.llvm.org/D109003
8ace121305 introduced a regression for code that explicitly ignores the
-Wframe-larger-than= warning. Make sure we don't generate the
warn-stack-size attribute for that case.
Differential Revision: https://reviews.llvm.org/D108686
The purpose of __attribute__((disable_sanitizer_instrumentation)) is to
prevent all kinds of sanitizer instrumentation applied to a certain
function, Objective-C method, or global variable.
The no_sanitize(...) attribute drops instrumentation checks, but may
still insert code preventing false positive reports. In some cases
though (e.g. when building Linux kernel with -fsanitize=kernel-memory
or -fsanitize=thread) the users may want to avoid any kind of
instrumentation.
Differential Revision: https://reviews.llvm.org/D108029
Removed AArch64 usage of the getMaxVScale interface, replacing it with
the vscale_range(min, max) IR Attribute.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D106277
@kpn pointed out that the global variable initialization functions didn't
have the "strictfp" metadata set correctly, and @rjmccall said that there
was buggy code in SetFPModel and StartFunction, this patch is to solve
those problems. When Sema creates a FunctionDecl, it sets the
FunctionDeclBits.UsesFPIntrin to "true" if the lexical FP settings
(i.e. a combination of command line options and #pragma float_control
settings) correspond to ConstrainedFP mode. That bit is used when CodeGen
starts codegen for a llvm function, and it translates into the
"strictfp" function attribute. See bugs.llvm.org/show_bug.cgi?id=44571
Reviewed By: Aaron Ballman
Differential Revision: https://reviews.llvm.org/D102343
In preparation for dropping support for it. I've replaced it with
a proper type where the correct type was obvious and left an
explicit getPointerElementType() where it wasn't.
Fix suggested by Yuanfang Chen:
Non-distinct debuginfo is attached to the function due to the undecorated declaration. Later, when seeing the function definition and `nodebug` attribute, the non-distinct debuginfo should be cleared.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D104777
We really ought to support no_sanitize("coverage") in line with other
sanitizers. This came up again in discussions on the Linux-kernel
mailing lists, because we currently do workarounds using objtool to
remove coverage instrumentation. Since that support is only on x86, to
continue support coverage instrumentation on other architectures, we
must support selectively disabling coverage instrumentation via function
attributes.
Unfortunately, for SanitizeCoverage, it has not been implemented as a
sanitizer via fsanitize= and associated options in Sanitizers.def, but
rolls its own option fsanitize-coverage. This meant that we never got
"automatic" no_sanitize attribute support.
Implement no_sanitize attribute support by special-casing the string
"coverage" in the NoSanitizeAttr implementation. To keep the feature as
unintrusive to existing IR generation as possible, define a new negative
function attribute NoSanitizeCoverage to propagate the information
through to the instrumentation pass.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=49035
Reviewed By: vitalybuka, morehouse
Differential Revision: https://reviews.llvm.org/D102772
This patch is the Part-1 (FE Clang) implementation of HW Exception handling.
This new feature adds the support of Hardware Exception for Microsoft Windows
SEH (Structured Exception Handling).
This is the first step of this project; only X86_64 target is enabled in this patch.
Compiler options:
For clang-cl.exe, the option is -EHa, the same as MSVC.
For clang.exe, the extra option is -fasync-exceptions,
plus -triple x86_64-windows -fexceptions and -fcxx-exceptions as usual.
NOTE:: Without the -EHa or -fasync-exceptions, this patch is a NO-DIFF change.
The rules for C code:
For C-code, one way (MSVC approach) to achieve SEH -EHa semantic is to follow
three rules:
* First, no exception can move in or out of _try region., i.e., no "potential
faulty instruction can be moved across _try boundary.
* Second, the order of exceptions for instructions 'directly' under a _try
must be preserved (not applied to those in callees).
* Finally, global states (local/global/heap variables) that can be read
outside of _try region must be updated in memory (not just in register)
before the subsequent exception occurs.
The impact to C++ code:
Although SEH is a feature for C code, -EHa does have a profound effect on C++
side. When a C++ function (in the same compilation unit with option -EHa ) is
called by a SEH C function, a hardware exception occurs in C++ code can also
be handled properly by an upstream SEH _try-handler or a C++ catch(...).
As such, when that happens in the middle of an object's life scope, the dtor
must be invoked the same way as C++ Synchronous Exception during unwinding
process.
Design:
A natural way to achieve the rules above in LLVM today is to allow an EH edge
added on memory/computation instruction (previous iload/istore idea) so that
exception path is modeled in Flow graph preciously. However, tracking every
single memory instruction and potential faulty instruction can create many
Invokes, complicate flow graph and possibly result in negative performance
impact for downstream optimization and code generation. Making all
optimizations be aware of the new semantic is also substantial.
This design does not intend to model exception path at instruction level.
Instead, the proposed design tracks and reports EH state at BLOCK-level to
reduce the complexity of flow graph and minimize the performance-impact on CPP
code under -EHa option.
One key element of this design is the ability to compute State number at
block-level. Our algorithm is based on the following rationales:
A _try scope is always a SEME (Single Entry Multiple Exits) region as jumping
into a _try is not allowed. The single entry must start with a seh_try_begin()
invoke with a correct State number that is the initial state of the SEME.
Through control-flow, state number is propagated into all blocks. Side exits
marked by seh_try_end() will unwind to parent state based on existing
SEHUnwindMap[].
Note side exits can ONLY jump into parent scopes (lower state number).
Thus, when a block succeeds various states from its predecessors, the lowest
State triumphs others. If some exits flow to unreachable, propagation on those
paths terminate, not affecting remaining blocks.
For CPP code, object lifetime region is usually a SEME as SEH _try.
However there is one rare exception: jumping into a lifetime that has Dtor but
has no Ctor is warned, but allowed:
Warning: jump bypasses variable with a non-trivial destructor
In that case, the region is actually a MEME (multiple entry multiple exits).
Our solution is to inject a eha_scope_begin() invoke in the side entry block to
ensure a correct State.
Implementation:
Part-1: Clang implementation described below.
Two intrinsic are created to track CPP object scopes; eha_scope_begin() and eha_scope_end().
_scope_begin() is immediately added after ctor() is called and EHStack is pushed.
So it must be an invoke, not a call. With that it's also guaranteed an
EH-cleanup-pad is created regardless whether there exists a call in this scope.
_scope_end is added before dtor(). These two intrinsics make the computation of
Block-State possible in downstream code gen pass, even in the presence of
ctor/dtor inlining.
Two intrinsic, seh_try_begin() and seh_try_end(), are added for C-code to mark
_try boundary and to prevent from exceptions being moved across _try boundary.
All memory instructions inside a _try are considered as 'volatile' to assure
2nd and 3rd rules for C-code above. This is a little sub-optimized. But it's
acceptable as the amount of code directly under _try is very small.
Part-2 (will be in Part-2 patch): LLVM implementation described below.
For both C++ & C-code, the state of each block is computed at the same place in
BE (WinEHPreparing pass) where all other EH tables/maps are calculated.
In addition to _scope_begin & _scope_end, the computation of block state also
rely on the existing State tracking code (UnwindMap and InvokeStateMap).
For both C++ & C-code, the state of each block with potential trap instruction
is marked and reported in DAG Instruction Selection pass, the same place where
the state for -EHsc (synchronous exceptions) is done.
If the first instruction in a reported block scope can trap, a Nop is injected
before this instruction. This nop is needed to accommodate LLVM Windows EH
implementation, in which the address in IPToState table is offset by +1.
(note the purpose of that is to ensure the return address of a call is in the
same scope as the call address.
The handler for catch(...) for -EHa must handle HW exception. So it is
'adjective' flag is reset (it cannot be IsStdDotDot (0x40) that only catches
C++ exceptions).
Suppress push/popTerminate() scope (from noexcept/noTHrow) so that HW
exceptions can be passed through.
Original llvm-dev [RFC] discussions can be found in these two threads below:
https://lists.llvm.org/pipermail/llvm-dev/2020-March/140541.htmlhttps://lists.llvm.org/pipermail/llvm-dev/2020-April/141338.html
Differential Revision: https://reviews.llvm.org/D80344/new/
Currently Clang does not add mustprogress to inifinite loops with a
known constant condition, matching C11 behavior. The forward progress
guarantee in C++11 and later should allow us to add mustprogress to any
loop (http://eel.is/c++draft/intro.progress#1).
This allows us to simplify the code dealing with adding mustprogress a
bit.
Reviewed By: aaron.ballman, lebedev.ri
Differential Revision: https://reviews.llvm.org/D96418
Such attributes can either be unset, or set to "true" or "false" (as string).
throughout the codebase, this led to inelegant checks ranging from
if (Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
to
if (Fn->hasAttribute("no-jump-tables") && Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
Introduce a getValueAsBool that normalize the check, with the following
behavior:
no attributes or attribute set to "false" => return false
attribute set to "true" => return true
Differential Revision: https://reviews.llvm.org/D99299
The first one is the real parameters of the coroutine function, the
other one just for copying parameters to the coroutine frame.
Considering the following c++ code:
```
struct coro {
...
};
coro foo(struct test & t) {
...
co_await suspend_always();
...
co_await suspend_always();
...
co_await suspend_always();
}
int main(int argc, char *argv[]) {
auto c = foo(...);
c.handle.resume();
...
}
```
Function foo is the standard coroutine function, and it has only
one parameter named t (ignoring this at first),
when we use the llvm code to compile this function, we can get the
following ir:
```
!2921 = distinct !DISubprogram(name: "foo", linkageName:
"_ZN6Object3fooE4test", scope: !2211, file: !45, li\
ne: 48, type: !2329, scopeLine: 48, flags: DIFlagPrototyped |
DIFlagAllCallsDescribed, spFlags: DISPFlagDefi\
nition | DISPFlagOptimized, unit: !44, declaration: !2328,
retainedNodes: !2922)
!2924 = !DILocalVariable(name: "t", arg: 2, scope: !2921, file: !45,
line: 48, type: !838)
...
!2926 = !DILocalVariable(name: "t", scope: !2921, type: !838, flags:
DIFlagArtificial)
```
We can find there are two `the same` DIVariable named t in the same
dwarf scope for foo.resume.
And when we try to use llvm-dwarfdump to dump the dwarf info of this
elf, we get the following output:
```
0x00006684: DW_TAG_subprogram
DW_AT_low_pc (0x00000000004013a0)
DW_AT_high_pc (0x00000000004013a8)
DW_AT_frame_base (DW_OP_reg7 RSP)
DW_AT_object_pointer (0x0000669c)
DW_AT_GNU_all_call_sites (true)
DW_AT_specification (0x00005b5c "_ZN6Object3fooE4test")
0x000066a5: DW_TAG_formal_parameter
DW_AT_name ("t")
DW_AT_decl_file ("/disk1/yifeng.dongyifeng/my_code/llvm/build/bin/coro-debug-1.cpp")
DW_AT_decl_line (48)
DW_AT_type (0x00004146 "test")
0x000066ba: DW_TAG_variable
DW_AT_name ("t")
DW_AT_type (0x00004146 "test")
DW_AT_artificial (true)
```
The elf also has two 't' in the same scope.
But unluckily, it might let the debugger
confused. And failed to print parameters for O0 or above.
This patch will make coroutine parameters and move
parameters use the same DIVar and try to fix the problems
that I mentioned before.
Test Plan: check-clang
Reviewed By: aprantl, jmorse
Differential Revision: https://reviews.llvm.org/D97533
tl;dr Correct implementation of Corouintes requires having lifetime intrinsics available.
Coroutine functions are functions that can be suspended and resumed latter. To do so, data that need to stay alive after suspension must be put on the heap (i.e. the coroutine frame).
The optimizer is responsible for analyzing each AllocaInst and figure out whether it should be put on the stack or the frame.
In most cases, for data that we are unable to accurately analyze lifetime, we can just conservatively put them on the heap.
Unfortunately, there exists a few cases where certain data MUST be put on the stack, not on the heap. Without lifetime intrinsics, we are unable to correctly analyze those data's lifetime.
To dig into more details, there exists cases where at certain code points, the current coroutine frame may have already been destroyed. Hence no frame access would be allowed beyond that point.
The following is a common code pattern called "Symmetric Transfer" in coroutine:
```
auto tmp = await_suspend();
__builtin_coro_resume(tmp.address());
return;
```
In the above code example, `await_suspend()` returns a new coroutine handle, which we will obtain the address and then resume that coroutine. This essentially "transfered" from the current coroutine to a different coroutine.
During the call to `await_suspend()`, the current coroutine may be destroyed, which should be fine because we are not accessing any data afterwards.
However when LLVM is emitting IR for the above code, it needs to emit an AllocaInst for `tmp`. It will then call the `address` function on tmp. `address` function is a member function of coroutine, and there is no way for the LLVM optimizer to know that it does not capture the `tmp` pointer. So when the optimizer looks at it, it has to conservatively assume that `tmp` may escape and hence put it on the heap. Furthermore, in some cases `address` call would be inlined, which will generate a bunch of store/load instructions that move the `tmp` pointer around. Those stores will also make the compiler to think that `tmp` might escape.
To summarize, it's really difficult for the mid-end to figure out that the `tmp` data is short-lived.
I made some attempt in D98638, but it appears to be way too complex and is basically doing the same thing as inserting lifetime intrinsics in coroutines.
Also, for reference, we already force emitting lifetime intrinsics in O0 for AlwaysInliner: https://github.com/llvm/llvm-project/blob/main/llvm/lib/Passes/PassBuilder.cpp#L1893
Differential Revision: https://reviews.llvm.org/D99227
This attribute represents the minimum and maximum values vscale can
take. For now this attribute is not hooked up to anything during
codegen, this will be added in the future when such codegen is
considered stable.
Additionally hook up the -msve-vector-bits=<x> clang option to emit this
attribute.
Differential Revision: https://reviews.llvm.org/D98030
08196e0b2e exposed LowerExpectIntrinsic's
internal implementation detail in the form of
LikelyBranchWeight/UnlikelyBranchWeight options to the outside.
While this isn't incorrect from the results viewpoint,
this is suboptimal from the layering viewpoint,
and causes confusion - should transforms also use those weights,
or should they use something else, D98898?
So go back to status quo by making LikelyBranchWeight/UnlikelyBranchWeight
internal again, and fixing all the code that used it directly,
which currently is only clang codegen, thankfully,
to emit proper @llvm.expect intrinsics instead.
Upon reviewing D98898 i've come to realization that these are
implementation detail of LowerExpectIntrinsicPass,
and they should not be exposed to outside of it.
This reverts commit ee8b53815d.
This makes the settings available for use in other passes by housing
them within the Support lib, but NFC otherwise.
See D98898 for the proposed usage in SimplifyCFG
(where this change was originally included).
Differential Revision: https://reviews.llvm.org/D98945
This removes some (but not all) uses of type-less CreateGEP()
and CreateInBoundsGEP() APIs, which are incompatible with opaque
pointers.
There are a still a number of tricky uses left, as well as many
more variation APIs for CreateGEP.
These are incompatible with opaque pointers. This is in preparation
of dropping this API on the IRBuilder side as well.
Instead explicitly pass the loaded type.
Initial support for using the OpenMPIRBuilder by clang to generate loops using the OpenMPIRBuilder. This initial support is intentionally limited to:
* Only the worksharing-loop directive.
* Recognizes only the nowait clause.
* No loop nests with more than one loop.
* Untested with templates, exceptions.
* Semantic checking left to the existing infrastructure.
This patch introduces a new AST node, OMPCanonicalLoop, which becomes parent of any loop that has to adheres to the restrictions as specified by the OpenMP standard. These restrictions allow OMPCanonicalLoop to provide the following additional information that depends on base language semantics:
* The distance function: How many loop iterations there will be before entering the loop nest.
* The loop variable function: Conversion from a logical iteration number to the loop variable.
These allow the OpenMPIRBuilder to act solely using logical iteration numbers without needing to be concerned with iterator semantics between calling the distance function and determining what the value of the loop variable ought to be. Any OpenMP logical should be done by the OpenMPIRBuilder such that it can be reused MLIR OpenMP dialect and thus by flang.
The distance and loop variable function are implemented using lambdas (or more exactly: CapturedStmt because lambda implementation is more interviewed with the parser). It is up to the OpenMPIRBuilder how they are called which depends on what is done with the loop. By default, these are emitted as outlined functions but we might think about emitting them inline as the OpenMPRuntime does.
For compatibility with the current OpenMP implementation, even though not necessary for the OpenMPIRBuilder, OMPCanonicalLoop can still be nested within OMPLoopDirectives' CapturedStmt. Although OMPCanonicalLoop's are not currently generated when the OpenMPIRBuilder is not enabled, these can just be skipped when not using the OpenMPIRBuilder in case we don't want to make the AST dependent on the EnableOMPBuilder setting.
Loop nests with more than one loop require support by the OpenMPIRBuilder (D93268). A simple implementation of non-rectangular loop nests would add another lambda function that returns whether a loop iteration of the rectangular overapproximation is also within its non-rectangular subset.
Reviewed By: jdenny
Differential Revision: https://reviews.llvm.org/D94973
Use a WeakTrackingVH to cope with the stmt emission logic that cleans up
unreachable blocks. This invalidates the reference to the deferred
replacement placeholder. Cope with it.
Fixes PR25102 (from 2015!)
This change adds a new IR noundef attribute, which denotes when a function call argument or return val may never contain uninitialized bits.
In MemorySanitizer, this attribute enables optimizations which decrease instrumented code size by up to 17% (measured with an instrumented build of clang) . I'll introduce the change allowing msan to take advantage of this information in a separate patch.
Differential Revision: https://reviews.llvm.org/D81678
Patch takes advantage of the implicit default behavior to reduce the number of attributes, which in turns reduces compilation time.
Reviewed By: serge-sans-paille
Differential Revision: https://reviews.llvm.org/D97116
This patch responds to a comment from @vitalybuka in D96203: suggestion to
do the change incrementally, and start by modifying this file name. I modified
the file name and made the other changes that follow from that rename.
Reviewers: vitalybuka, echristo, MaskRay, jansvoboda11, aaron.ballman
Differential Revision: https://reviews.llvm.org/D96974
This change implements support for applying profile instrumentation
only to selected files or functions. The implementation uses the
sanitizer special case list format to select which files and functions
to instrument, and relies on the new noprofile IR attribute to exclude
functions from instrumentation.
Differential Revision: https://reviews.llvm.org/D94820
This change implements support for applying profile instrumentation
only to selected files or functions. The implementation uses the
sanitizer special case list format to select which files and functions
to instrument, and relies on the new noprofile IR attribute to exclude
functions from instrumentation.
Differential Revision: https://reviews.llvm.org/D94820
This is an enhancement to LLVM Source-Based Code Coverage in clang to track how
many times individual branch-generating conditions are taken (evaluate to TRUE)
and not taken (evaluate to FALSE). Individual conditions may comprise larger
boolean expressions using boolean logical operators. This functionality is
very similar to what is supported by GCOV except that it is very closely
anchored to the ASTs.
Differential Revision: https://reviews.llvm.org/D84467
UBSan was using the complete-object align rather than nv alignment
when checking the "this" pointer of a method.
Furthermore, CGF.CXXABIThisAlignment was also being set incorrectly,
due to an incorrectly negated test. The latter doesn't appear to have
had any impact, due to it not really being used anywhere.
Differential Revision: https://reviews.llvm.org/D93072
The strictfp metadata was added to the casting AST nodes in D85960, but
we aren't using that metadata yet. This patch adds that support.
In order to avoid lots of ad-hoc passing around of the strictfp bits I
updated the IRBuilder when moving from a function that has the Expr* to a
function that lacks it. I believe we should switch to this pattern to keep
the strictfp support from being overly invasive.
For the purpose of testing that we're picking up the right metadata, I
also made my tests use a pragma to make the AST's strictfp metadata not
match the global strictfp metadata. This exposes issues that we need to
deal with in subsequent patches, and I believe this is the right method
for most all of our clang strictfp tests.
Differential Revision: https://reviews.llvm.org/D88913
Since C++11, the C++ standard has a forward progress guarantee
[intro.progress], so all such functions must have the `mustprogress`
requirement. In addition, from C11 and onwards, loops without a non-zero
constant conditional or no conditional are also required to make
progress (C11 6.8.5p6). This patch implements these attribute deductions
so they can be used by the optimization passes.
Differential Revision: https://reviews.llvm.org/D86841
The attribute has no effect on a do statement since the path of execution
will always include its substatement.
It adds a diagnostic when the attribute is used on an infinite while loop
since the codegen omits the branch here. Since the likelihood attributes
have no effect on a do statement no diagnostic will be issued for
do [[unlikely]] {...} while(0);
Differential Revision: https://reviews.llvm.org/D89899
This patch is mainly doing two things:
1. Adding support for parentheses, making the combination of target features
more diverse;
2. Making the priority of ’,‘ is higher than that of '|' by default. So I need
to make some change with PTX Builtin function.
Differential Revision: https://reviews.llvm.org/D89184
This allows using annotation in a much more contexts than it currently has.
especially when annotation with template or constexpr.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D88645
This implements the likelihood attribute for the switch statement. Based on the
discussion in D85091 and D86559 it only handles the attribute when placed on
the case labels or the default labels.
It also marks the likelihood attribute as feature complete. There are more QoI
patches in the pipeline.
Differential Revision: https://reviews.llvm.org/D89210
Bruno De Fraine discovered some issues with D85091. The branch weights
generated for `logical not` and `ternary conditional` were wrong. The
`logical and` and `logical or` differed from the code generated of
`__builtin_predict`.
Adjusted the generated code for the likelihood to match
`__builtin_predict`. The patch is based on Bruno's suggestions.
Differential Revision: https://reviews.llvm.org/D88363
Add the ability to selectively instrument a subset of functions by dividing the functions into N logical groups and then selecting a group to cover. By selecting different groups over time you could cover the entire application incrementally with lower overhead than instrumenting the entire application at once.
Differential Revision: https://reviews.llvm.org/D87953
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
This is the initial part of the implementation of the C++20 likelihood
attributes. It handles the attributes in an if statement.
Differential Revision: https://reviews.llvm.org/D85091
types.
We previously did not treat a function type as dependent if it had a
parameter pack with a non-dependent type -- such a function type depends
on the arity of the pack so is dependent even though none of the
parameter types is dependent. In order to properly handle this, we now
treat pack expansion types as always being dependent types (depending on
at least the pack arity), and always canonically being pack expansion
types, even in the unusual case when the pattern is not a dependent
type. This does mean that we can have canonical types that are pack
expansions that contain no unexpanded packs, which is unfortunate but
not inaccurate.
We also previously did not treat a typedef type as
instantiation-dependent if its canonical type was not
instantiation-dependent. That's wrong because instantiation-dependence
is a property of the type sugar, not of the type; an
instantiation-dependent type can have a non-instantiation-dependent
canonical type.
Summary:
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
Reviewers: hfinkel, xbolva00, lebedev.ri, nikic, rjmccall, spatel, jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: thopre, yamauchi, kuter, fhahn, merge_guards_bot, hiraditya, bollu, rkruppe, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71739
Erich Keane