Summary:
The "sparc"/"sparcel" architectures appears in ArchMap (used by -B option) but not in OutputFormatMap (used by -I/-O option). Add their targets into OutputFormatMap for consistency.
Note that AFAIK there're no targets for 32-bit little-endian SPARC ("elf32-sparcel") in GNU binutils.
Reviewers: espindola, alexshap, rupprecht, jhenderson, compnerd, jakehehrlich
Reviewed By: jhenderson, compnerd, jakehehrlich
Subscribers: jyknight, emaste, arichardson, fedor.sergeev, jakehehrlich, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63238
llvm-svn: 363524
LLD test case will be fixed in a following commit.
Original commit message:
[yaml2obj] - Allow setting custom section types for implicit sections.
We were hardcoding the final section type for sections that
are usually implicit. The patch fixes that.
This also fixes a few issues in existent test cases and removes
one precompiled object.
Differential revision: https://reviews.llvm.org/D63267
llvm-svn: 363401
We were hardcoding the final section type for sections that
are usually implicit. The patch fixes that.
This also fixes a few issues in existent test cases and removes
one precompiled object.
Differential revision: https://reviews.llvm.org/D63267
llvm-svn: 363377
If dynamic table is missing, output "dynamic strtab not found'. If the index is
out of range, output "Invalid Offset<..>".
https://bugs.llvm.org/show_bug.cgi?id=40807
Reviewed by: jhenderson, grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D63084
Patch by Yuanfang Chen.
llvm-svn: 363374
Despite the fact that .strtab is non-allocatable,
there is no reason to disallow setting the custom address
for it.
The patch also adds a test case showing we can set any address
we want for other implicit sections.
Differential revision: https://reviews.llvm.org/D63137
llvm-svn: 363368
With this patch we get ability to set any flags we want
for implicit sections defined in YAML.
Differential revision: https://reviews.llvm.org/D63136
llvm-svn: 363367
Summary: Tidied up errors during command line parsing to be more consistent with the rest of llvm-objcopy errors.
Reviewers: jhenderson, rupprecht, espindola, alexshap
Reviewed By: jhenderson, rupprecht
Subscribers: emaste, arichardson, MaskRay, llvm-commits, jakehehrlich
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62973
llvm-svn: 363350
Summary: AFAIK, the "sparc" target is big endian and the target for 32-bit little-endian SPARC is denoted as "sparcel". This patch fixes the endianness of "sparc" target and adds "sparcel" target for 32-bit little-endian SPARC.
Reviewers: espindola, alexshap, rupprecht, jhenderson
Reviewed By: jhenderson
Subscribers: jyknight, emaste, arichardson, fedor.sergeev, jakehehrlich, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63251
llvm-svn: 363336
Support loading code coverage data from regular archives, thin archives,
and from MachO universal binaries which contain archives.
Testing: check-llvm, check-profile (with {A,UB}San enabled)
rdar://51538999
Differential Revision: https://reviews.llvm.org/D63232
llvm-svn: 363325
Summary:
Use llvm::fouts() as the default stream for outputing. No new stream
should be constructed to output at the same time.
https://bugs.llvm.org/show_bug.cgi?id=42140
Reviewers: jhenderson, grimar, MaskRay, phosek, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63115
Patch by Yuanfang Chen!
llvm-svn: 363198
Summary: thin-archive.test assumes the Output/<testname> structure that lit creates. Rewrite the test in a way that still tests the same thing (creating via relative path and adding via absolute path) but doesn't assume this specific lit structure, making it possible to run in a lit emulator.
Reviewers: gbreynoo
Reviewed By: gbreynoo
Subscribers: llvm-commits, bkramer
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62930
llvm-svn: 363189
Dependent libraries support for the legacy api was committed in a
broken state (see: https://reviews.llvm.org/D60274). This was missed
due to the painful nature of having to integrate the changes into a
linker in order to test. This change implements support for dependent
libraries in the legacy LTO api:
- I have removed the current api function, which returns a single
string, and added functions to access each dependent library
specifier individually.
- To reduce the testing pain, I have made the api functions as thin as
possible to maximize coverage from llvm-lto.
- When doing ThinLTO the system linker will load the modules lazily
when scanning the input files. Unfortunately, when modules are
lazily loaded there is no access to module level named metadata. To
fix this I have added api functions that allow querying the IRSymtab
for the dependent libraries. I hope to expand the api in the future
so that, eventually, all the information needed by a client linker
during scan can be retrieved from the IRSymtab.
Differential Revision: https://reviews.llvm.org/D62935
llvm-svn: 363140
For lld, pass in Config->Timestamp (which is set based on lld's
/timestamp: and /Brepro flags). Since the writeWindowsResourceCOFF()
data is only used in-memory by LLD and the obj's timestamp isn't used
for anything in the output, this doesn't change behavior.
For llvm-cvtres, add an optional /timestamp: parameter, and use the
current behavior of calling time() if the parameter is not passed in.
This doesn't really change observable behavior (unless someone passes
/timestamp: to llvm-cvtres, which wasn't possible before), but it
removes the last unqualified call to time() from llvm/lib, which seems
like a good thing.
Differential Revision: https://reviews.llvm.org/D63116
llvm-svn: 363050
-o is in the documentation, but not in the llvm-dwarfdump help text.
This patch adds it by inverting the -o and --out-file aliasing. It also
removes --out-file from the documentation, since we don't really want
people to be using this switch in practice.
Reviewed by: aprantl, JDevlieghere, dblaikie
Differential Revision: https://reviews.llvm.org/D63013
llvm-svn: 363044
Allow using both custom numeric and string values for Link field of the
dynamic and regular symbol tables.
Differential revision: https://reviews.llvm.org/D63077
llvm-svn: 363042
This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
And share some code with lld-link.
While here, also add a FIXME about PR42180 and merge r360150 to llvm-lib.
Differential Revision: https://reviews.llvm.org/D63021
llvm-svn: 363016
Summary:
When llvm-objcopy sorts sections during finalization, it only sorts based on the offset, which can cause the group section to come after the sections it contains. This causes link failures when using gold to link objects created by llvm-objcopy.
Fix this for now by copying GNU objcopy's behavior of placing SHT_GROUP sections first. In the future, we may want to remove this sorting entirely to more closely preserve the input file layout.
This fixes https://bugs.llvm.org/show_bug.cgi?id=42052.
Reviewers: jakehehrlich, jhenderson, MaskRay, espindola, alexshap
Reviewed By: MaskRay
Subscribers: phuongtrang148993, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62620
llvm-svn: 362973
The ELF gABI requires the tag values of DT_REL, DT_RELA and DT_JMPREL to be
treated as virtual addresses. They were treated as offsets. Fixes PR41832.
Differential Revision: https://reviews.llvm.org/D62972
llvm-svn: 362969
Bottleneck Analysis is one of the many views available in llvm-mca. Therefore,
it should be enabled when flag -all-views is passed in input to the tool.
llvm-svn: 362964
This is a follow-up for D62809.
Content and Size fields should be optional as was discussed in comments
of the D62809's thread. With that, we can describe a specific string table and
symbol table sections in a more correct way and also show appropriate errors.
The patch adds lots of test cases where the behavior is described in details.
Differential revision: https://reviews.llvm.org/D62957
llvm-svn: 362931
We have a code in buildSectionIndex() that adds implicit sections:
// Add special sections after input sections, if necessary.
for (StringRef Name : implicitSectionNames())
if (SN2I.addName(Name, SecNo)) {
// Account for this section, since it wasn't in the Doc
++SecNo;
DotShStrtab.add(Name);
}
The problem arises when .dynsym is specified explicitly and no
DynamicSymbols is used. In that case, we do not add
.dynstr implicitly and will assert later when will try to set Link
for .dynsym.
Seems, in this case, reasonable behavior is to allow Link field to be zero.
This is what this patch does.
Differential revision: https://reviews.llvm.org/D63001
llvm-svn: 362929
Summary:
Recompute and update offset/size fields so that we can implement llvm-objcopy options like --only-section.
This patch is the first step and focuses on supporting load commands that covered by existing tests: executable files and
dynamic libraries are not supported.
Reviewers: alexshap, rupprecht, jhenderson
Reviewed By: alexshap, rupprecht
Subscribers: compnerd, jakehehrlich, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62652
llvm-svn: 362863
Summary:
This fixes the bugzilla id,41862 to support dealing with checking
stop address against start address to support this not being a
proper object to check the disasembly against like gnu objdump
currently does.
Reviewers: jakehehrlich, rupprecht, echristo, jhenderson, grimar
Reviewed By: jhenderson
Subscribers: MaskRay, smeenai, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61969
Patch by Nicholas Krause!
llvm-svn: 362847
Displays the architecture names of an input file.
Unknown architectures are represented by unknown(cputype,cpusubtype).
Patch by Anusha Basana <anusha.basana@gmail.com>
Differential Revision: https://reviews.llvm.org/D62753
llvm-svn: 362840
This implements the functionality described in
https://lld.llvm.org/Partitions.html. It works as follows:
- Reads the section headers using the ELF header at file offset 0;
- If extracting a loadable partition:
- Finds the section containing the required partition ELF header by looking it up in the section table;
- Reads the ELF and program headers from the section.
- If extracting the main partition:
- Reads the ELF and program headers from file offset 0.
- Filters the section table according to which sections are in the program headers that it read:
- If ParentSegment != nullptr or section is not SHF_ALLOC, then it goes in.
- Sections containing partition ELF headers or program headers are excluded as there are no headers for these in ordinary ELF files.
Differential Revision: https://reviews.llvm.org/D62364
llvm-svn: 362818
lib.exe doesn't allow creating .lib files with object files that have
differing machine types. Update llvm-lib to match.
The motivation is to make it possible to infer the machine type of a
.lib file in lld, so that it can warn when e.g. a 32-bit .lib file is
passed to a 64-bit link (PR38965).
Fixes PR38782.
Differential Revision: https://reviews.llvm.org/D62913
llvm-svn: 362798
This is https://bugs.llvm.org/show_bug.cgi?id=42122.
If an object file has a size less than program header's file [offset + size]
(i.e. if we have overflow), llvm-objcopy crashes instead of reporting a
error.
The patch fixes this issue.
Differential revision: https://reviews.llvm.org/D62898
llvm-svn: 362778
This patch implements the "CREATE_THIN" MRI script command, allowing thin archives to be created via MRI scripts.
Differential Revision: https://reviews.llvm.org/D62919
llvm-svn: 362704
We have a few sections that can be added implicitly to the output:
".dynsym", ".dynstr", ".symtab", ".strtab" and ".shstrtab".
Problem appears when such section is listed explicitly in YAML.
In that case it's content is written twice:
first time during writing of regular sections listed in the document
and second time during special handling.
Because of that their file offsets can become unexpectedly broken:
(yaml file for sample below lists .dynsym explicitly before .text.foo)
Before patch:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .dynsym DYNSYM 0000000000000100 00000250
0000000000000030 0000000000000018 A 6 0 8
[ 2] .text.foo PROGBITS 0000000000000200 00000200
0000000000000000 0000000000000000 AX 0 0 0
After patch:
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .dynsym DYNSYM 0000000000000100 00000200
0000000000000030 0000000000000018 A 6 0 8
[ 2] .text.foo PROGBITS 0000000000000200 00000230
0000000000000000 0000000000000000 AX 0 0 0
This patch reorganizes our code and fixes the issue described.
Differential revision: https://reviews.llvm.org/D62809
llvm-svn: 362602
In glibc, DT_PPC_GOT indicates that PowerPC32 Secure PLT ABI is used.
I plan to use it in D62464.
DT_PPC_OPT currently indicates if a TLSDESC inspired TLS optimization is
enabled.
Reviewed By: grimar, jhenderson, rupprecht
Differential Revision: https://reviews.llvm.org/D62851
llvm-svn: 362569
Arm Architecture v8.5a introduces Branch Target Identification (BTI). When
enabled all indirect branches must target a bti instruction of the
appropriate form. As PLT sequences may sometimes be the target of an
indirect branch and PLT[0] always is, a static linker may need to generate
PLT sequences that contain "bti c" as the first instruction. In effect:
bti c
adrp x16, page offset to .got.plt
...
Instead of:
adrp x16, page offset to .got.plt
...
At present the PLT decoding assumes the adrp will always be the first
instruction. This patch adds support for a single "bti c" to prefix it. A
test binary has been uploaded with such a PLT sequence. A forthcoming LLD
patch will make heavy use of the PLT decoding code.
Differential Revision: https://reviews.llvm.org/D62598
llvm-svn: 362523
One way of using llvm-symbolizer is to interactively within a process
write a line from a parent process to llvm-symbolizer's stdin, and then
read the output, then write the next line, read, etc. This worked as
long as all the lines were good. However, this didn't work prior to this
patch if any of the inputs were bad inputs, because the output is not
flushed after a bad input, meaning the parent process is sat waiting for
output, whilst llvm-symbolizer is sat waiting for input. This patch
flushes the output after every invocation of symbolizeInput when reading
from stdin. It also removes unnecessary flushing when llvm-symbolizer is
not reading addresses from stdin, which should give a slight performance
boost in these situations.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D62371
llvm-svn: 362511
ELF for the 64-bit Arm Architecture defines two processor-specific dynamic
tags:
DT_AARCH64_BTI_PLT 0x70000001, d_val
DT_AARCH64_PAC_PLT 0x70000003, d_val
These presence of these tags indicate that PLT sequences have been
protected using Branch Target Identification and Pointer Authentication
respectively. The presence of both indicates that the PLT sequences have
been protected with both Branch Target Identification and Pointer
Authentication.
This patch adds the tags and tests for llvm-readobj and yaml2obj.
As some of the processor specific dynamic tags overlap, this patch splits
them up, keeping their original default value if they were not previously
mentioned explicitly in a switch case.
Differential Revision: https://reviews.llvm.org/D62596
llvm-svn: 362493
ELF for the 64-bit Arm Architecture defines a processor specific property
type GNU_PROPERTY_AARCH64_FEATURE_1_AND as GNU_PROPERTY_LOPROC. This
property works in a similar way to the existing X86 processor specific
property GNU_PROPERTY_GNU_X86_FEATURE_1_AND.
Two feature bits are defined for GNU_PROPERTY_AARCH64_FEATURE_1_AND:
- GNU_PROPERTY_AARCH64_FEATURE_1_BTI 0x1
- GNU_PROPERTY_AARCH64_FEATURE_1_PAC 0x2
This patch defines the property, feature bits and implements support for
printing in llvm-readobj.
Differential Revision: https://reviews.llvm.org/D62595
llvm-svn: 362490
Includes a fix for an introduced build failure due to a post c++11 use of std::mismatch.
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362484
This reverts commit r362407. It broke compilation of
llvm/lib/Object/ArchiveWriter.cpp:
error: type 'llvm::sys::path::const_iterator' does not provide a call
operator
llvm-svn: 362413
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362407
Remove the test checking error message for 'is a directory'. It does
not seem to serve any real purpose, and it relies on matching platform
error strings which are unpredictable and makes the test fragile.
Furthermore, it fails on NetBSD where read() works on directories,
and therefore does not return EISDIR at all.
Fixes r362141.
Differential Revision: https://reviews.llvm.org/D62773
llvm-svn: 362404
gnu-sections.test currently use relocs.obj.elf-x86_64 and
relocs.obj.elf-i386 precompiled objects as an inputs.
These inputs actually initially were introduced to test the
dump of relocations and have almost nothing common with dumping
sections.
Patch converts the test to use yaml2obj. That allows to remove
relocs.obj.elf-i386 binary.
(relocs.obj.elf-x86_64 is still used by another test and can't be removed atm).
Differential revision: https://reviews.llvm.org/D62659
llvm-svn: 362377
rL362089 introduced a set of yaml based reloc-types-*.test test cases
(instead of huge reloc-types.test that used a lot of precompiled binaries)
These test cases checks LLVM-styled dumping of the relocations.
gnu-relocations.test was a test case to check GNU styled relocations dumping.
It did that only for elf-x86 and elf-x86_64 targets. It did not test all of the
relocations though.
Now, after rL362089, it does not make sence to keep it.
This patch updates reloc-types-elf-i386.test and reloc-types-elf-x64.test tests
with llvm-readelf calls to check GNU styled output in one place.
It removes gnu-relocations.test completely.
One of intentions of doing this is also to get rid of relocs.obj.elf-i386 and
relocs.obj.elf-x86_64 precompiled objects completely (they are used in other tests still).
Differential revision: https://reviews.llvm.org/D62655
llvm-svn: 362374
Summary:
The tests for r362121 ran dsymutil against a test binary every time.
This caused problems on lld-x86_64-ubuntu-fast as dsymutil required
a lipo tool be available to process those binaries.
This change rewrites the new test cases in macho-disassemble-g-dsym
to use bespoke test binaries (exe and dwarf) simplifying the test's
runtime dependencies.
The changes to tools/llvm-objdump/MachODump.cpp are unchanged from
r362121
Reviewers: pete, lhames, JDevlieghere
Reviewed By: pete
Subscribers: smeenai, aprantl, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62694
llvm-svn: 362141
Summary:
Commonly programmers use llvm-objdump to disassemble Mach-O target
binaries with Mach-O dSYMS. While llvm-objdump allows programmers to
disassemble Universal binaries, it previously did not recognize
Universal dSYM files. This change updates llvm-objdump to support
passing in Universal files via the -dsym option. Now, when
disassembling a Mach-O file either as a stand alone file or as an entry
in a Universal binariy, llvm-objdump will search through a Universal
dSYM for a Mach-O matching the architecture flag of the file being
disassembled.
Reviewers: pete, lhames
Reviewed By: pete
Subscribers: rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62642
llvm-svn: 362121
This change rewrites and splits reloc-types.test
to use yaml2obj instead of precompiled binaries.
That allowed to remove 7 precompiled objects from the inputs.
I took the existent objects, used obj2yaml on them, simplified the result and
used yaml2obj in the test case with the result.
Notes:
* I converted, but did not remove relocs.obj.elf-i386, relocs.obj.elf-x86_64 or relocs.obj.elf-mips objects
because found they are used in other tests.
* I was unable to convert relocs.obj.elf-ppc64, because obj2yaml hangs on this file for me.
* I was unable to convert relocs.obj.macho-arm, relocs.obj.macho-i386 and relocs.obj.macho-x86_64
because the output produced by obj2yaml does not seem to be correct.
* Because of the above I did not remove the script for creating all
of those objects: test\tools\llvm-readobj\Inputs\relocs.py
Differential revision: https://reviews.llvm.org/D62594
llvm-svn: 362089
It is now possible after D61937 was landed and was discussed
in it's review comments. It is not consistent with GNU, which
does not output .dynamic section content in this case for
no visible reason.
Differential revision: https://reviews.llvm.org/D62179
llvm-svn: 361943
This removes 2 precompiled objects from the test case and replaces
them with a single YAML. That allowed to simplify and clean up the test,
remove excessive checks.
Differential revision: https://reviews.llvm.org/D62529
llvm-svn: 361932
This diff starts the implementation of llvm-lipo
which is supposed to be a drop-in replacement for the well-known tool lipo.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D61927
llvm-svn: 361896
Summary:
This patch implement parsing symbol table for xcoffobjfile and
output as yaml format. Parsing auxiliary entries of a symbol
will be in a separate patch.
The XCOFF object file (aix_xcoff.o) used in the test comes from
-bash-4.2$ cat test.c
extern int i;
extern int TestforXcoff;
int main()
{
i++;
TestforXcoff--;
}
Patch by DiggerLin
Reviewers: sfertile, hubert.reinterpretcast, MaskRay, daltenty
Differential Revision: https://reviews.llvm.org/D61532
llvm-svn: 361832
They were failing on 32-bit Windows. In the cases where I've changed
test expectations, I've checked that they match the output of GNU
readelf.
llvm-svn: 361807
This is a follow-up to https://reviews.llvm.org/D60411, but for llvm-as.
New output:
OVERVIEW: llvm .ll -> .bc assembler
USAGE: llvm-as [options] <input .llvm file>
OPTIONS:
Generic Options:
-help - Display available options (-help-hidden for more)
-help-list - Display list of available options (-help-list-hidden for more)
-version - Display the version of this program
llvm-as Options:
-data-layout=<layout-string> - data layout string to use
-disable-output - Disable output
-f - Enable binary output on terminals
-module-hash - Emit module hash
-o=<filename> - Override output filename
Differential Revision: https://reviews.llvm.org/D60603
llvm-svn: 361750
This fixes a problem where back-pressure increases caused by register
dependencies were not correctly notified if execution was also delayed by memory
dependencies.
llvm-svn: 361740
This copies the Sandy Bridge zero idiom support to later CPUs. Adding the AVX2 and AVX512F/VL instructions as appropriate.
Differential Revision: https://reviews.llvm.org/D62360
llvm-svn: 361690
This adds `-parent-recurse-depth` which limits the number of parent DIEs
being dumped.
Differential revision: https://reviews.llvm.org/D62359
llvm-svn: 361671
GNU readelf tool prints slightly different dynamic table "header" and
surrounds dynamic tag names by brackets. This patch implements the same
formatting for GNU-style output of the `llvm-readobj`.
LLVM
```
DynamicSection [ (13 entries)
Tag Type Name/Value
0x00000006 SYMTAB 0x168
...
]
```
GNU
```
Dynamic section at offset 0x1d0 contains 13 entries:
Tag Type Name/Value
0x00000006 (SYMTAB) 0x168
...
```
Differential Revision: https://reviews.llvm.org/D62256
llvm-svn: 361633
It is now possible after D61937 was landed and was discussed
in it's review comments. It is not consistent with GNU, which
does not output .dynamic section content in this case for
no visible reason.
Differential revision: https://reviews.llvm.org/D62179
llvm-svn: 361630
r361479 added tests that did --implicit-check-not=main, but a user found
that they failed on his machine, due to it having 'main' in a file path
printed earlier in the output. This test fixes this issue by making the
check pattern more explicit.
llvm-svn: 361621
Summary:
https://bugs.llvm.org/show_bug.cgi?id=41353
I'm new to LLVM and C++ so please do not hesitate to iterate with me on this fix.
Patch by Mike Pozulp!
Reviewers: rupprecht, zbrid, grimar, jhenderson
Reviewed By: rupprecht, jhenderson
Subscribers: jhenderson, chrisjackson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61117
llvm-svn: 361595
llvm/test/tools/llvm-objdump/X86/elf-disassemble-symbol-labels-rel.test
uses --implicit-check-not to verify that certain patterns do not occur
in llvm-objdump's output, except in places where they are explicitly
checked. Unfortunately, the patterns are generic enough that they may
be part of the file name which is also output by llvm-objdump. This
change matches the line with the filename explicitly so that the
implicit patterns are not applied to it.
llvm-svn: 361563
This change renames a number of the disassembly tests to standardise
disasm/diassemble/disassembly to disassemble. Requested in
https://reviews.llvm.org/D62255.
llvm-svn: 361491
This is the third commit in a series of patches to improve test coverage
of llvm-objdump. In this patch I have added a number of tests testing
various aspects of disassembly.
Reviewed by: MaskRay, grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D62255
llvm-svn: 361489
This patch focuses on adding additional testing for the --source switch.
For reference, the source-interleave-x86_64.ll test file has been split
into two parts - the input (shared with the other tests) and the test
itself.
Reviewed by: MaskRay, rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D61996
llvm-svn: 361479
This fixes PR41886: llvm-objdump -d -r -j .text doesn't show inline relocations of .text
While here, switch to stable_sort() because we don't want to change the order of relocations applied to the same location. gABI says consecutive relocation records are composed together and their order matters. In practise it is difficult to see relocations applied to the same location not consecutive, we just have to keep the relative order of relocations with the same offset.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D62253
llvm-svn: 361395
This patch brings various error messages into line with each other, by
removing trailing full stops, and making the first letter lower-case.
This addresses https://bugs.llvm.org/show_bug.cgi?id=40859.
Reviewed by: jhenderson, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D62072
Patch by Alex Brachet
llvm-svn: 361384
This adds proper handling of the NONAME-keyword, which makes llvm-dlltool
generate an import using the ordinal instead of the name.
Patch by by Jannik Vogel, test added by Stefan Schmidt.
Differential Revision: https://reviews.llvm.org/D62175
llvm-svn: 361367
This is a result of what I found during my work on https://bugs.llvm.org/show_bug.cgi?id=41679.
Previously LLVM readelf took the information about .dynamic section
from its PT_DYNAMIC segment only. GNU tools have a bit different logic.
They also use the information from the .dynamic section header if it is available.
This patch changes the code to improve the compatibility with the GNU Binutils.
Differential revision: https://reviews.llvm.org/D61937
llvm-svn: 361165
Summary:
the stream format is exactly the same as for ThreadList and ModuleList
streams, only the entry types are slightly different, so the changes in
this patch are just straight-forward applications of established
patterns.
Reviewers: amccarth, jhenderson, clayborg
Subscribers: markmentovai, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61885
llvm-svn: 360908
This allows the generic parts of section-filter.test to be tested on all
targets. The X86-specific parts have been moved to another test.
llvm-svn: 360904
This is the first in a set of patches I have to improve testing of
llvm-objdump. This patch targets --all-headers, --section, and
--full-contents. In the --section case, it deletes a pre-canned binary
which is only used by the one test and replaces it with yaml.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D61941
llvm-svn: 360893
When a LLVM binary such as llvm-*-fuzzer is built with libc++, it has dependency on libc++. The path to find shared libraries specified in llvm-*-fuzzer is relative. As a result, these binaries cannot be copied to an arbitrary directory and launched from there. Changes in this patch add a LIT feature to indicate that libc++ is used to build and, based on the feature exclude test cases that test by copying llvm-*-fuzzer binaries to a directory.
Reviewers: hubert.reinterpretcast, dberris, amyk, jasonliu, EricWF
Reviewed By: hubert.reinterpretcast, amyk
Subscribers: javed.absar, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61265
llvm-svn: 360672
This adds support for the arm64_32 watchOS ABI to LLVM's low level tools,
teaching them about the specific MachO choices and constants needed to
disassemble things.
llvm-svn: 360663
Previously, the test didn't work because '\' characters appeared in the
sed string, causing bogus escape characters to form in the substituted
string literal. Switching to using '%/p' causes the path to be emitted
with '/' characters instead, so that there are are no escaping issues.
Reviewed by: kzhuravl, grimar
Differential Revision: https://reviews.llvm.org/D61856
llvm-svn: 360660
Summary:
We hit undefined references building with ThinLTO when one source file
contained explicit instantiations of a template method (weak_odr) but
there were also implicit instantiations in another file (linkonce_odr),
and the latter was the prevailing copy. In this case the symbol was
marked hidden when the prevailing linkonce_odr copy was promoted to
weak_odr. It led to unsats when the resulting shared library was linked
with other code that contained a reference (expecting to be resolved due
to the explicit instantiation).
Add a CanAutoHide flag to the GV summary to allow the thin link to
identify when all copies are eligible for auto-hiding (because they were
all originally linkonce_odr global unnamed addr), and only do the
auto-hide in that case.
Most of the changes here are due to plumbing the new flag through the
bitcode and llvm assembly, and resulting test changes. I augmented the
existing auto-hide test to check for this situation.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, dexonsmith, arphaman, dang, llvm-commits, steven_wu, wmi
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59709
llvm-svn: 360466
Add support for ".hidden" ".internal" ".protected" and " 0x%02x" for
other st_other bits used by some architectures.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D61718
llvm-svn: 360439
This patch adds a number of tests to test various cases not covered by
existing tests. All of them work correctly, with no need to change
llvm-objcopy itself, although some do indicate possible areas for
improvement.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D61727
llvm-svn: 360422
Add check for, and parsing of, .dwo files to Statistics.cpp; create a new getNon
SkeletonUnitDie function for DWARFUnit.h
Reviewers: dblaikie
Differential Revision: https://review.llvm.org/D61755
llvm-svn: 360380
This patch fixes PR41523
https://bugs.llvm.org/show_bug.cgi?id=41523
Regions can now nest/overlap provided that they have different names.
Anonymous regions cannot overlap.
Region end markers must specify the region name. The only exception is for when
there is only one user-defined region; in that particular case, the region end
marker doesn't need to specify a name.
Incorrect region end markers are no longer ignored. Instead, the tool reports an
error and we exit with an error code.
Added test cases to verify the new diagnostic error messages.
Updated the llvm-mca docs to reflect this feature change.
Differential Revision: https://reviews.llvm.org/D61676
llvm-svn: 360351
Summary:
The implementation is a pretty straightforward extension of the pattern
used for (de)serializing the ModuleList stream. Since there are other
streams which use the same format (MemoryList and MemoryList64, at
least). I tried to generalize the code a bit so that adding future
streams of this type can be done with less code.
Reviewers: amccarth, jhenderson, clayborg
Subscribers: markmentovai, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61423
llvm-svn: 360350
I've started this cleanup more several times now, but got sidetracked
elsewhere, e.g. by llvm-exegesis problems. Not this time, finally!
This is mainly cleaning up the inverse throughput values,
and a few latencies/uops, based on the llvm-exegesis measured values.
Though this is not complete by any means,
there's certainly more cleanup to be done.
The performance numbers (i've only checked by RawSpeed benchmark) aren't
really surprising - overall this *slightly* (< -1%) improves perf.
llvm-svn: 360341
This restores part of r359311 that was reverted by r359830.
Rewrite the symbol types to fix several issues.
Notable difference is that the type of __init_array_start changes from
't' to 'd'.
GNU nm used to mark ELF symbols relative to .init_array as 't'
https://sourceware.org/bugzilla/show_bug.cgi?id=24505 (before 2.33)
because ".init" is the prefix. The bug was copied by r287803.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D61551
llvm-svn: 360339
The VOP3 form should always be the preferred selection, to be shrunk
later. This should only be an optimization issue, but this partially
works around a problem from clobbering VCC when SIFixSGPRCopies
rewrites an SCC defining operation directly to VCC.
3 of the testcases are regressions from failing to fold the immediate
in cases it should. These can be avoided by improving the VCC liveness
handling in SIFoldOperands. Simply increasing the threshold to
computeRegisterLiveness works, although this is common enough that VCC
liveness should probably be tracked throughout the pass. The hack of
leaving behind an implicit_def instruction to avoid breaking iterator
wastes instruction count, which inhibits finding the VCC def in long
chains of adds. Doing this however exposes different, worse looking
regressions from poor scheduling behavior. This could probably be
avoided around by forcing the shrink of the addc here, but the
scheduler should probably be fixed.
The r600 add test needs to be split out because it asserts on the
arguments in the new test during the calling convention lowering.
llvm-svn: 360293
Prior to this patch, llvm-objcopy's error messages for archives with
unsupported members only mentioned the archive name, not the member
name, making them unhelpful. This change improves it by approximately
following GNU objcopy's error message syntax of
"<archive name>(<member name>): <problem>".
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D61674
llvm-svn: 360251
This patch adds support for --prefix-alloc-sections, which adds a prefix
to every allocated section names.
It adds a prefix after renaming section names by --rename-section as GNU
objcopy does.
Fixes PR41266: https://bugs.llvm.org/show_bug.cgi?id=41266
Differential Revision: https://reviews.llvm.org/D60042
Patch by Seiya Nuta.
llvm-svn: 360233
This fixes the https://bugs.llvm.org/show_bug.cgi?id=41355.
Previously with -r we printed relocation section name instead of the target section name.
It was like this: "RELOCATION RECORDS FOR [.rel.text]"
Now it is: "RELOCATION RECORDS FOR [.text]"
Also when relocation target section has more than one relocation section,
we did not combine the output. Now we do.
Differential revision: https://reviews.llvm.org/D61312
llvm-svn: 360143
In some cases it is useful to explicitly set symbol's st_name value.
For example, I am using it in a patch for LLD to remove the broken
binary from a test case and replace it with a YAML test.
Differential revision: https://reviews.llvm.org/D61180
llvm-svn: 360137
We require d/q suffixes on the memory form of these instructions to disambiguate the memory size.
We don't require it on the register forms, but need to support parsing both with and without it.
Previously we always printed the d/q suffix on the register forms, but it's redundant and
inconsistent with gcc and objdump.
After this patch we should support the d/q for parsing, but not print it when its unneeded.
llvm-svn: 360085
Summary:
This change enables `cl::Grouping` for short options --
options with names of a single character. This is consistent with GNU
getopt behavior.
Reviewers: rnk, MaskRay
Reviewed By: MaskRay
Subscribers: thopre, cfe-commits, MaskRay, rupprecht, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D61270
llvm-svn: 359917
Patch adds support for dumping of file headers with llvm-readobj. XCOFF
object files are added to test dumping a well formed file, and dumping
both negative timestamps and negative symbol counts, both of which are
allowed in the XCOFF definition.
Differential Revision: https://reviews.llvm.org/D60878
llvm-svn: 359878
If certain switches are not specified, llvm-strip behaves as if
--strip-all were specified. This means that for testing, when we don't
want the stripping behaviour, we have to specify one of these switches,
which can be confusing. This change adds --no-strip-all to allow an
alternative way of suppressing the default stripping, in a less
confusing manner.
Reviewed by: jakehehrlich, MaskRay
Differential Revision: https://reviews.llvm.org/D61377
llvm-svn: 359781
Summary:
Triple components in `XFAIL` lines are tested against the target triple.
Various tests that are expected to fail on big-endian hosts are marked
as being `XFAIL` for big-endian targets. This patch corrects these tests
by having them test against a new `host-byteorder-big-endian` feature.
Reviewers: xingxue, sfertile, jasonliu
Reviewed By: xingxue
Subscribers: jvesely, nhaehnle, fedor.sergeev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60551
llvm-svn: 359689
This improves readability and the behavior is consistent with GNU objdump.
The new test test/tools/llvm-objdump/X86/disassemble-section-name.s
checks we print newlines before and after "Disassembly of section ...:"
Differential Revision: https://reviews.llvm.org/D61127
llvm-svn: 359668
Previously we did not report this.
Also this removes multiple lookups in the map
what cleanups the code.
Differential revision: https://reviews.llvm.org/D61322
llvm-svn: 359663
-t is --symbols in llvm-readobj but --section-details (unimplemented) in readelf.
The confusing option should not be used since we aim for improving
compatibility.
Keep just one llvm-readobj -t use case in test/tools/llvm-readobj/symbols.test
llvm-svn: 359661
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
GNU objcopy uses bfd_elf_get_default_section_type to decide the candidate section type,
which roughly translates to our [a] (I assume SEC_COMMON implies SHF_ALLOC):
(!(Sec.Flags & ELF::SHF_ALLOC) || Flags & (SectionFlag::SecContents | SectionFlag::SecLoad)))
Then, it updates the section type in bfd/elf.c:elf_fake_sections if:
if (this_hdr->sh_type == SHT_NULL)
this_hdr->sh_type = sh_type; // common case
else if (this_hdr->sh_type == SHT_NOBITS
&& sh_type == SHT_PROGBITS
&& (asect->flags & SEC_ALLOC) != 0) // uncommon case
...
this_hdr->sh_type = sh_type;
If the following condition is met the uncommon branch is executed:
if (elf_section_type (osec) == SHT_NULL
&& (osec->flags == isec->flags
|| (final_link
&& ((osec->flags ^ isec->flags)
& ~(SEC_LINK_ONCE | SEC_LINK_DUPLICATES | SEC_RELOC)) == 0)))
I suggest we just ignore this clause and follow the common case
behavior, which is done in this patch. Rationales to do so:
If --set-section-flags is a no-op (osec->flags == isec->flags)
(corresponds to the "readonly" test in set-section-flags.test), GNU
objcopy will require (Sec.Flags & ELF::SHF_ALLOC). [a] is essentially:
Flags & (SectionFlag::SecContents | SectionFlag::SecLoad)
This special case is not really useful. Non-SHF_ALLOC SHT_NOBITS
sections do not make much sense and it doesn't matter if they are
SHT_NOBITS or SHT_PROGBITS.
For all other RUN lines in set-section-flags.test, the new behavior
matches GNU objcopy, i.e. this patch improves compatibility.
Differential Revision: https://reviews.llvm.org/D60189
llvm-svn: 359639
Add overlap functionality to llvm-profdata tool to compute the similarity
between two profile files.
Differential Revision: https://reviews.llvm.org/D60977
llvm-svn: 359612
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=41371.
Currently, it is possible to break the sh_link field of the dynamic relocation section
by removing the section it refers to. The patch fixes an issue and adds 2 test cases.
One of them shows that it does not seem possible to break the sh_info field.
I added an assert to verify this.
Differential revision: https://reviews.llvm.org/D60825
llvm-svn: 359552
This patch extends the `-bb` option to be able to use the group
extraction feature from the BlockExtractor.
In particular, `-bb=func:bb` is modified to support a list of basic
blocks per function: `-bb=func:bb1[;bb2...]` that will be extracted
together if at all possible (region must be single entry.)
Differential Revision: https://reviews.llvm.org/D60973
llvm-svn: 359464
In addition, fix and convert the two tests to yaml2obj based. This
allows us to delete two executables.
X86/weak.test: 'v' was not tested
X86/init-fini.test: symbol types of __bss_start _edata _end were wrong
GNU nm reports __init_array_start as 't', and __preinit_array_start as 'd'.
__init_array_start is 't' just because its section ".init_array" starts with ".init"
'd' makes more sense and allows us to drop the weird SHT_INIT_ARRAY rule.
So, change __init_array_start to 'd' instead.
llvm-svn: 359311
Summary:
llvm-{objcopy,strip} (and many other LLVM binary utilities) accept
cl::opt style -long-option as well as many short options (e.g. -p -S
-x). People who use them as replacement of GNU binutils often use the
grouped option syntax (POSIX Utility Conventions), e.g. -Sx => -S -x,
-Wd => -W -d, -sj.text => -s -j.text
There is ambiguity if a long option starts with the character used by a
short option. Drop the support for -long-option to resolve the ambiguity.
This divergence from other utilities is accepted (other utilities
continue supporting -long-option).
https://lists.llvm.org/pipermail/llvm-dev/2019-April/131786.html
Reviewers: alexshap, jakehehrlich, jhenderson, rupprecht, espindola
Reviewed By: jakehehrlich, jhenderson, rupprecht
Subscribers: grimar, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60439
llvm-svn: 359265
Adds a representation of the section header table to XCOFFObjectFile,
and implements enough to dump the section headers with llvm-obdump.
Differential Revision: https://reviews.llvm.org/D60784
llvm-svn: 359244
yaml2obj might crash on invalid input when unable to parse the YAML.
Recently a crash with a very similar nature was fixed for an empty files.
This patch revisits the fix and does it in yaml::Input instead.
It seems to be more correct way to handle such situation.
With that crash for invalid inputs is also fixed now.
Differential revision: https://reviews.llvm.org/D61059
llvm-svn: 359178
For well-known type IDs, include the name of the type.
To not duplicate the ID->name map, make llvm-readobj call this new
function as well. It has slightly different output, so this also
requires updating a few tests.
Differential Revision: https://reviews.llvm.org/D61086
llvm-svn: 359153
If two .res files contain the same resource, cvtres.exe (and hence
link.exe) reject the input with this message:
CVTRES : fatal error CVT1100: duplicate resource. type:STRING, name:101, language:0x0409
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
llvm-cvtres (and lld-link) used to silently pick one of the duplicate
resources instead. This patch makes them report an error as well.
We slightly improve on cvtres by printing the name of two .res files
containing duplicate entries as well.
Differential Revision: https://reviews.llvm.org/D61049
llvm-svn: 359083
Summary:
The opt level was not being passed down to the ThinLTO backend when
invoked via clang (for distributed ThinLTO).
This exposed an issue where the new PM was asserting if the Thin or
regular LTO backend pipelines were invoked with -O0 (not a new issue,
could be provoked by invoking in-process *LTO backends via linker using
new PM and -O0). Fix this similar to the old PM where -O0 only does the
necessary lowering of type metadata (WPD and LowerTypeTest passes) and
then quits, rather than asserting.
Reviewers: xur
Subscribers: mehdi_amini, inglorion, eraman, hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits, pcc
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61022
llvm-svn: 359025
When a Swift module built with debug info imports a library without
debug info from a textual interface, the textual interface is
necessary to reconstruct types defined in the library's interface. By
recording the Swift interface files in DWARF dsymutil can collect them
and LLDB can find them.
This patch teaches dsymutil to look for DW_TAG_imported_modules and
records all references to parseable Swift ingterfrace files and copies
them to
a.out.dSYM/Contents/Resources/<Arch>/<ModuleName>.swiftinterface
<rdar://problem/49751748>
llvm-svn: 358921
This adds an alias for llvm-symbolizer with different defaults so that
it can be used as a drop-in replacement for GNU's addr2line.
If a substring "addr2line" is found in the tool's name:
* it defaults "-i", "-f" and "-C" to OFF;
* it uses "--output-style=GNU" by default.
Differential Revision: https://reviews.llvm.org/D60067
llvm-svn: 358749
This patch addresses two differences in the output of llvm-symbolizer
and GNU's addr2line:
* llvm-symbolizer prints an empty line after the report for an address.
* With "-f -i=0", llvm-symbolizer replaces the name of an inlined
function with the name from the symbol table, i. e., the top caller
function in the inlining chain. addr2line preserves the name of the
inlined function.
Differential Revision: https://reviews.llvm.org/D60770
llvm-svn: 358747
Another attempt to land the changes in debug line header to prevent duplicate
files in Dwarf 5. I rolled back my previous commit because of a mistake in
generating the object file in a test. Meanwhile, I addressed some offline
comments and changed the implementation; the largest difference is that
MCDwarfLineTableHeader does not keep DwarfVersion but gets it as a parameter. I
also merged the patch to fix two lld tests that will strt to fail into this
patch.
Original Commit:
https://reviews.llvm.org/D59515
Original Message:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf
5) However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
llvm-svn: 358732
Summary:
This patch adds support for yaml (de)serialization of the minidump
ModuleList stream. It's a fairly straight forward-application of the
existing patterns to the ModuleList structures defined in previous
patches.
One thing, which may be interesting to call out explicitly is the
addition of "new" allocation functions to the helper BlobAllocator
class. The reason for this was, that there was an emerging pattern of a
need to allocate space for entities, which do not have a suitable
lifetime for use with the existing allocation functions. A typical
example of that was the "size" of various lists, which is only available
as a temporary returned by the .size() method of some container. For
these cases, one can use the new set of allocation functions, which
will take a temporary object, and store it in an allocator-managed
buffer until it is written to disk.
Reviewers: amccarth, jhenderson, clayborg, zturner
Subscribers: lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60405
llvm-svn: 358672
.rela.dyn is a section that has sh_info normally
set to zero. And Info is an optional field in the description
of the relocation section in YAML.
But currently, yaml2obj would fail to produce the object when
Info is not explicitly listed.
The patch fixes the issue.
Differential revision: https://reviews.llvm.org/D60820
llvm-svn: 358656
llvm-objcopy currently emits an error if a section to be removed is
referenced by another section. This is a reasonable thing to do, but is
different to GNU objcopy. We should allow users who know what they are
doing to have a way to produce the invalid ELF. This change adds a new
switch --allow-broken-links to both llvm-strip and llvm-objcopy to do
precisely that. The corresponding sh_link field is then set to 0 instead
of an error being emitted.
I cannot use llvm-readelf/readobj to test the link fields because they
emit an error if any sections, like the .dynsym, cannot be properly
loaded.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D60324
llvm-svn: 358649
Summary:
This change takes the full list of bfd targets that lld supports (see `ScriptParser.cpp`), including generic handling for `*-freebsd` targets (which uses the same settings but with a FreeBSD OSABI). In particular this adds mips support for `--output-target` (but not yet via `--binary-architecture`).
lld and llvm-objcopy use their own different custom data structures, so I'd prefer to check this in as-is (add support directly in llvm-objcopy, including all the test coverage) and do a separate NFC patch(s) that consolidate the two by putting this mapping into libobject.
See [[ https://bugs.llvm.org/show_bug.cgi?id=41462 | PR41462 ]].
Reviewers: jhenderson, jakehehrlich, espindola, alexshap, arichardson
Reviewed By: arichardson
Subscribers: fedor.sergeev, emaste, sdardis, krytarowski, atanasyan, llvm-commits, MaskRay, arichardson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60773
llvm-svn: 358562
This relands D60376/rL358405, with the difference: sed 'y/\t/ /' -> tr '\t' ' '
BSD sed doesn't support escape characters for the 'y' command.
I didn't use it in rL358405 because it was not listed at
https://llvm.org/docs/GettingStarted.html#software but it
should be available.
Original description:
In GNU objdump, -w/--wide aligns instructions in the disassembly output.
This patch does the same to llvm-objdump. However, we always use the
wide format (-w/--wide is ignored), because the narrow format
(instructions are misaligned) is probably not very useful.
In llvm-readobj, we made a similar decision: always use the wide format,
accept but ignore -W/--wide.
To save some columns, we change the tab before hex bytes (controlled by
--[no-]show-raw-insn) to a space.
llvm-svn: 358474
This relands rL358418. It missed one test that should also use -macho
Note, all the other -private-header -exports-trie tests are used
together with -macho.
llvm-svn: 358472
Summary:
In GNU objdump, -w/--wide aligns instructions in the disassembly output.
This patch does the same to llvm-objdump. However, we always use the
wide format (-w/--wide is ignored), because the narrow format
(instructions are misaligned) is probably not very useful.
In llvm-readobj, we made a similar decision: always use the wide format,
accept but ignore -W/--wide.
To save some columns, we change the tab before hex bytes (controlled by
--[no-]show-raw-insn) to a space.
Reviewers: rupprecht, jhenderson, grimar
Reviewed By: jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60376
llvm-svn: 358405
This is a resubmission of a previous patch that caused test failures,
with the fixes for the relevant tests included.
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
llvm-svn: 358395
Only display help from the llvm-nm category instead of all llvm options, which make it much more usable.
There's still an issue with -s, which is probably a bug in llvm::cl and worth another commit.
Differential Revision: https://reviews.llvm.org/D60411
llvm-svn: 358185
Summary:
A *lot* of instructions have this special register.
It seems this never really worked, but i finally noticed it only
because it happened to break for `CMOV16rm` instruction.
We serialized that register as "" (empty string), which is naturally
'ignored' during deserialization, so we re-create a `MCInst` with
too few operands.
And when we then happened to try to resolve variant sched class
for this mis-serialized instruction, and the variant predicate
tried to read an operand that was out of bounds since we got less operands,
we crashed.
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=41448 | PR41448 ]].
Reviewers: craig.topper, courbet
Reviewed By: courbet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60517
llvm-svn: 358153
Summary:
Make DW_LNS_copy set the discriminator register to 0, to conform to
DWARF 4 & 5: "Then it sets the discriminator register to 0, and sets the
basic_block, prologue_end and epilogue_begin registers to false."
Because all of DW_LNE_end_sequence, DN_LNS_copy, and special opcodes reset
discriminator to 0, we can move discriminator=0 to appendRowToMatrix.
Also, make DW_LNS_copy print before appending the row, as it is similar
to a address+=0,line+=0 special opcode, which prints before appending
the row.
Reviewers: dblaikie, probinson, aprantl
Reviewed By: dblaikie
Subscribers: danielcdh, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60364
llvm-svn: 358148
Many of our instructions have both a _Int form used by intrinsics and a form
used by other IR constructs. In the EVEX space the _Int versions usually cover
all the capabilities include broadcasting and rounding. While the other version
only covers simple register/register or register/load forms. For this reason
in EVEX, the non intrinsic form is usually marked isCodeGenOnly=1.
In the VEX encoding space we were less consistent, but usually the _Int version
was the isCodeGenOnly version.
This commit makes the VEX instructions match the EVEX instructions. This was
done by manually studying the AsmMatcher table so its possible I missed some
cases, but we should be closer now.
I'm thinking about using the isCodeGenOnly bit to simplify the EVEX2VEX
tablegen code that disambiguates the _Int and non _Int versions. Currently it
checks register class sizes and Record the memory operands come from. I have
some other changes I was looking into for D59266 that may break the memory check.
I had to make a few scheduler hacks to keep the _Int versions from being treated
differently than the non _Int version.
Differential Revision: https://reviews.llvm.org/D60441
llvm-svn: 358138