This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235977
After legalization, scalar SETCC has an i32 result type on AArch64.
The i1 requirement seems too conservative, replace it with an assert.
This also means that we now can run after legalization. That should also
be fine, since the ops legalizer runs again after each combine, and
all types created all have the same sizes as the (legal) inputs.
Exposed by r235917; while there, robustize its tests (bsl also uses the
register it defines).
llvm-svn: 235922
When the setcc has f64 operands, we can't build a vector setcc mask
to feed a vselect, because f64 doesn't divide v3f32 evenly.
Just bail out when that happens.
llvm-svn: 235917
Summary:
Set operation action for SINT_TO_FP and UINT_TO_FP nodes with v4i32,
v8i8, v8i16 inputs to allow promotion of v4f16 results.
Add tests for sitofp and uitofp for vec4, vec8, vec16, and i8, i16, i32,
and i64 vectors. Only missing tests are for v16i8 and v16i16 as the
shift operations are too complicated to write a proper check sequence.
The conversions from v4i64 to v4f16 do not depend on this patch - v4i64
is split and the conversion gets handled while lowering v2i64. I am
adding a test here for completeness.
Reviewers: aemerson, rengolin, ab, jmolloy, srhines
Subscribers: rengolin, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D9166
llvm-svn: 235609
Found by code inspection, but breaking i16 at least breaks other tests.
They aren't checking this in particular though, so also add some
explicit tests for the already working types.
llvm-svn: 235148
For the most common ones (such as fadd), we already did the promotion.
Do the same thing for all the others.
Currently, we'll just crash/assert on all these operations, as
there's no hardware or libcall support whatsoever.
f16 (half) is specified as an interchange - not arithmetic - format,
and is expected to be promoted to single-precision for arithmetic
operations.
While there, teach the legalizer about promoting some of the (mostly
floating-point) operations that we never needed before.
Differential Revision: http://reviews.llvm.org/D8648
See related discussion on the thread for: http://reviews.llvm.org/D8755
llvm-svn: 234550
restrictions when choosing a type for small-memcpy inlining in
SelectionDAGBuilder.
This ensures that the loads and stores output for the memcpy won't be further
expanded during legalization, which would cause the total number of instructions
for the memcpy to exceed (often significantly) the inlining thresholds.
<rdar://problem/17829180>
llvm-svn: 234462
Instead of lowering SELECT to SELECT_CC which is further lowered later
immediately call the SELECT_CC lowering code. This is preferable
because:
- Avoids an unnecessary roundtrip through the legalization queues with
an intermediate node.
- More importantly: Lowered operations get visited last leading to SELECT_CC
getting visited with legalized operands and unlegalized ones for preexisting
SELECT_CC nodes. This does not hurt the current code (hence no testcase) but
is required for another patch I am working on.
Differential Revision: http://reviews.llvm.org/D8187
llvm-svn: 234334
extended loads.
Implement the related target lowering hook so that the optimization has a better
estimation of the cost of an extension.
rdar://problem/19267165
llvm-svn: 233753
Simplify boolean expressions using `true` and `false` with `clang-tidy`
Patch by Richard Thomson.
Reviewed By: rengolin
Differential Revision: http://reviews.llvm.org/D8525
llvm-svn: 233089
Summary: Building FP16 constant vectors caused the FP16 data to be bitcast to i64. This patch creates a BITCAST node with the correct value, and adds a test to verify correct handling.
Reviewers: mcrosier
Reviewed By: mcrosier
Subscribers: mcrosier, jmolloy, ab, srhines, llvm-commits, rengolin, aemerson
Differential Revision: http://reviews.llvm.org/D8369
llvm-svn: 232562
Optimize concat_vectors of truncated vectors, where the intermediate
type is illegal, to avoid said illegality, e.g.,
(v4i16 (concat_vectors (v2i16 (truncate (v2i64))),
(v2i16 (truncate (v2i64)))))
->
(v4i16 (truncate (v4i32 (concat_vectors (v2i32 (truncate (v2i64))),
(v2i32 (truncate (v2i64)))))))
This isn't really target-specific, and, as such, would best go in the
DAGCombiner. However, ISD::TRUNCATE legality isn't keyed on both input
and result type, so we might generate worse code when we don't know
better. On AArch64 we know it's fine for v2i64->v4i16 and v4i32->v8i8.
rdar://20022387
llvm-svn: 232459
This adds new node types for each intrinsic.
For instance, for addv, we have AArch64ISD::UADDV, such that:
(v4i32 (uaddv ...))
is the same as
(v4i32 (scalar_to_vector (i32 (int_aarch64_neon_uaddv ...))))
that is,
(v4i32 (INSERT_SUBREG (v4i32 (IMPLICIT_DEF)),
(i32 (int_aarch64_neon_uaddv ...)), ssub)
In a combine, we transform all such across-vector-lanes intrinsics to:
(i32 (extract_vector_elt (uaddv ...), 0))
This has one big advantage: by making the extract_element explicit, we
enable the existing patterns for lane-aware instructions to fire.
This lets us avoid needlessly going through the GPRs. Consider:
uint32x4_t test_mul(uint32x4_t a, uint32x4_t b) {
return vmulq_n_u32(a, vaddvq_u32(b));
}
We now generate:
addv.4s s1, v1
mul.4s v0, v0, v1[0]
instead of the previous:
addv.4s s1, v1
fmov w8, s1
dup.4s v1, w8
mul.4s v0, v1, v0
rdar://20044838
llvm-svn: 231840
Summary:
In PNaCl, most atomic instructions have their own @llvm.nacl.atomic.* function, each one, with a few exceptions, represents a consistent behaviour across all NaCl-supported targets. Unfortunately, the atomic RMW operations nand, [u]min, and [u]max aren't directly represented by any such @llvm.nacl.atomic.* function. This patch refines shouldExpandAtomicRMWInIR in TargetLowering so that a future `Le32TargetLowering` class can selectively inform the caller how the target desires the atomic RMW instruction to be expanded (ie via load-linked/store-conditional for ARM/AArch64, via cmpxchg for X86/others?, or not at all for Mips) if at all.
This does not represent a behavioural change and as such no tests were added.
Patch by: Richard Diamond.
Reviewers: jfb
Reviewed By: jfb
Subscribers: jfb, aemerson, t.p.northover, llvm-commits
Differential Revision: http://reviews.llvm.org/D7713
llvm-svn: 231250
As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers
ld.bfd and ld.gold currently only support a subset of the whole range of AArch64
ELF TLS relocations. Furthermore, they assume that some of the code sequences to
access thread-local variables are produced in a very specific sequence.
When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize
the instructions.
Even if that wouldn't be the case, it's good to produce the exact sequence,
as that ensures that linkers can perform optimizing relaxations.
This patch:
* implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang
would grow an -mtls-size option to allow support for both, but that's not part of this patch.
* by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold
linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation)
is added to enable generation of local dynamic code sequence, but is off by default.
* makes sure that the exact expected code sequence for local dynamic and general dynamic
accesses is produced, by making use of a new pseudo instruction. The patch also removes
two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo
SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ).
llvm-svn: 231227
a lookup, pass that in rather than use a naked call to getSubtargetImpl.
This involved passing down and around either a TargetMachine or
TargetRegisterInfo. Update all callers/definitions around the targets
and SelectionDAG.
llvm-svn: 230699
This required plumbing a TargetRegisterInfo through computeRegisterProperties
and into findRepresentativeClass which uses it for register class
iteration. This required passing a subtarget into a few target specific
initializations of TargetLowering.
llvm-svn: 230583
It was previously using the subtarget to get values for the global
offset without actually checking each function as it was generating
code. Go ahead and solidify the current behavior and make the
existing FIXMEs more prominent.
As a note the ARM backend previously had a thumb1 and non-thumb1
set of defaults. Only the former was tested so I've changed the
behavior to only use that for now.
llvm-svn: 230245
This patch adds the isProfitableToHoist API. For AArch64, we want to prevent a
fmul from being hoisted in cases where it is more profitable to form a
fmsub/fmadd.
Phabricator Review: http://reviews.llvm.org/D7299
Patch by Lawrence Hu <lawrence@codeaurora.org>
llvm-svn: 230241
Everyone except R600 was manually passing the length of a static array
at each callsite, calculated in a variety of interesting ways. Far
easier to let ArrayRef handle that.
There should be no functional change, but out of tree targets may have
to tweak their calls as with these examples.
llvm-svn: 230118
This adds a safe interface to the machine independent InputArg struct
for accessing the index of the original (IR-level) argument. When a
non-native return type is lowered, we generate the hidden
machine-level sret argument on-the-fly. Before this fix, we were
representing this argument as OrigArgIndex == 0, which is an outright
lie. In particular this crashed in the AArch64 backend where we
actually try to access the type of the original argument.
Now we use a sentinel value for machine arguments that have no
original argument index. AArch64, ARM, Mips, and PPC now check for this
case before accessing the original argument.
Fixes <rdar://19792160> Null pointer assertion in AArch64TargetLowering
llvm-svn: 229413
Canonicalize access to function attributes to use the simpler API.
getAttributes().getAttribute(AttributeSet::FunctionIndex, Kind)
=> getFnAttribute(Kind)
getAttributes().hasAttribute(AttributeSet::FunctionIndex, Kind)
=> hasFnAttribute(Kind)
llvm-svn: 229218
While various DAG combines try to guarantee that a vector SETCC
operation will have the same output size as input, there's nothing
intrinsic to either creation or LegalizeTypes that actually guarantees
it, so the function needs to be ready to handle a mismatch.
Fortunately this is easy enough, just extend or truncate the naturally
compared result.
I couldn't reproduce the failure in other backends that I know have
SIMD, so it's probably only an issue for these two due to shared
heritage.
Should fix PR21645.
llvm-svn: 228518
from a conditional branch fed by an add/sub/mul-with-overflow node.
We previously used the SDLoc of the overflow node, for no good reason.
In some cases, this led to the Bcc and B terminators having different
source orders, and DBG_VALUEs being inserted between them.
The real issue is with the code that can't handle DBG_VALUEs between
terminators: the few places affected by this will be fixed soon.
In the meantime, fixing the SDLoc is a positive change no matter what.
No tests, as I have no idea how to get .loc emitted for branches?
rdar://19347133
llvm-svn: 228463
Original patch by Luke Iannini. Minor improvements and test added by
Erik de Castro Lopo.
Differential Revision: http://reviews.llvm.org/D6877
From: Erik de Castro Lopo <erikd@mega-nerd.com>
llvm-svn: 226473
type (in addition to the memory type).
The *LoadExt* legalization handling used to only have one type, the
memory type. This forced users to assume that as long as the extload
for the memory type was declared legal, and the result type was legal,
the whole extload was legal.
However, this isn't always the case. For instance, on X86, with AVX,
this is legal:
v4i32 load, zext from v4i8
but this isn't:
v4i64 load, zext from v4i8
Whereas v4i64 is (arguably) legal, even without AVX2.
Note that the same thing was done a while ago for truncstores (r46140),
but I assume no one needed it yet for extloads, so here we go.
Calls to getLoadExtAction were changed to add the value type, found
manually in the surrounding code.
Calls to setLoadExtAction were mechanically changed, by wrapping the
call in a loop, to match previous behavior. The loop iterates over
the MVT subrange corresponding to the memory type (FP vectors, etc...).
I also pulled neighboring setTruncStoreActions into some of the loops;
those shouldn't make a difference, as the additional types are illegal.
(e.g., i128->i1 truncstores on PPC.)
No functional change intended.
Differential Revision: http://reviews.llvm.org/D6532
llvm-svn: 225421
Weak externals are resolved statically, so we can actually generate the tail
call on PE/COFF targets without breaking the requirements. It is questionable
whether we want to propagate the current behaviour for MachO as the requirements
are part of the ARM ELF specifications, and it seems that prior to the SVN
r215890, we would have tail'ed the call. For now, be conservative and only
permit it on PE/COFF where the call will always be fully resolved.
llvm-svn: 225119
In the large code model we have to first get the address of the GOT entry, load
the address of the constant, and then load the constant itself.
To avoid these loads and the GOT entry alltogether this commit changes the way
how FP constants are materialized in the large code model. The constats are now
materialized in a GPR and then bitconverted/moved into the FPR.
Reviewed by Tim Northover
Fixes rdar://problem/16572564.
llvm-svn: 223941
r208210 introduced an optimization that improves the vector select
codegen by doing the setcc on vectors directly.
This is a problem they the setcc operands are i1s, because the
optimization would create vectors of i1, which aren't legal.
Part of PR21549.
Differential Revision: http://reviews.llvm.org/D6308
llvm-svn: 223075
Daniel Jasper