Commit Graph

501 Commits

Author SHA1 Message Date
Jakob Stoklund Olesen 38a0b94dce When a physreg is live-in and live through a basic block, make sure its live
range covers the entire block.

The live range can't be terminated at a random instruction.

llvm-svn: 130619
2011-04-30 19:12:33 +00:00
Chris Lattner 0ab5e2cded Fix a ton of comment typos found by codespell. Patch by
Luis Felipe Strano Moraes!

llvm-svn: 129558
2011-04-15 05:18:47 +00:00
Jakob Stoklund Olesen f8beafe207 Don't add live ranges for sub-registers when clobbering a physical register.
Both coalescing and register allocation already check aliases for interference,
so these extra segments are only slowing us down.

This speeds up both linear scan and the greedy register allocator.

llvm-svn: 129283
2011-04-11 18:08:10 +00:00
Jakob Stoklund Olesen 64beb47783 Recompute hasPHIKill flags when shrinking live intervals.
PHI values may be deleted, causing the flags to be wrong. This fixes PR9616.

llvm-svn: 129092
2011-04-07 18:43:14 +00:00
Jakob Stoklund Olesen 2e85396509 Allow coalescing with reserved physregs in certain cases:
When a virtual register has a single value that is defined as a copy of a
reserved register, permit that copy to be joined. These virtual register are
usually copies of the stack pointer:

  %vreg75<def> = COPY %ESP; GR32:%vreg75
  MOV32mr %vreg75, 1, %noreg, 0, %noreg, %vreg74<kill>
  MOV32mi %vreg75, 1, %noreg, 8, %noreg, 0
  MOV32mi %vreg75<kill>, 1, %noreg, 4, %noreg, 0
  CALLpcrel32 ...

Coalescing these virtual registers early decreases register pressure.
Previously, they were coalesced by RALinScan::attemptTrivialCoalescing after
register allocation was completed.

The lower register pressure causes the mcinst-lowering-cmp0.ll test case to fail
because it depends on linear scan spilling a particular register.

I am deleting 2008-08-05-SpillerBug.ll because it is counting the number of
instructions emitted, and its revision history shows the 'correct' count being
edited many times.

llvm-svn: 128845
2011-04-04 21:00:03 +00:00
NAKAMURA Takumi 41f32c7127 lib/CodeGen/LiveIntervalAnalysis.cpp: [PR9590] Don't use std::pow(float,float) here.
We don't expect the real "powf()" on some hosts (and powf() would be available on other hosts).
For consistency, std::pow(double,double) may be called instead.
Or, precision issue might attack us, to see unstable regalloc and stack coloring.

llvm-svn: 128629
2011-03-31 12:11:33 +00:00
Jakob Stoklund Olesen fdc09941f2 Accept instructions that read undefined values.
This is not supposed to happen, but I have seen the x86 rematter getting
confused when rematerializing partial redefs.

llvm-svn: 127857
2011-03-18 03:06:04 +00:00
Jakob Stoklund Olesen 8630840c30 Dead code elimination may separate the live interval into multiple connected components.
I have convinced myself that it can only happen when a phi value dies. When it
happens, allocate new virtual registers for the components.

llvm-svn: 127827
2011-03-17 20:37:07 +00:00
Jakob Stoklund Olesen 557a82c099 Clarify debugging output.
llvm-svn: 127771
2011-03-16 22:56:08 +00:00
Jakob Stoklund Olesen c6cc485051 Make SpillIs an optional pointer. Avoid creating a bunch of temporary SmallVectors.
llvm-svn: 127388
2011-03-10 01:21:58 +00:00
Jakob Stoklund Olesen 71c380f6c7 Let shrinkToUses optionally return a list of now dead machine instructions.
llvm-svn: 127192
2011-03-07 23:29:10 +00:00
Jakob Stoklund Olesen ac32d8a691 Handle the special case of registers begin redefined by early-clobber defs.
In this case, the value need to be available at the load index instead of the
normal use index.

llvm-svn: 127167
2011-03-07 18:56:16 +00:00
Jakob Stoklund Olesen d58c8d12ab Fix PHI handling in LiveIntervals::shrinkToUses().
We need to wait until we meet a PHIDef in its defining block before resurrecting
PHIKills in the predecessors.

This should unbreak the llvm-gcc-build-x86_64-darwin10-x-mingw32-x-armeabi bot.

llvm-svn: 126905
2011-03-03 00:20:51 +00:00
Nick Lewycky 68faa2dbbe Quiet a compiler warning about unused variable 'ExtVNI'.
llvm-svn: 126815
2011-03-02 01:43:30 +00:00
Jakob Stoklund Olesen f3c6e9211c Simplify LiveIntervals::shrinkToUses() a bit by using the new extendInBlock().
llvm-svn: 126806
2011-03-02 00:33:03 +00:00
Jakob Stoklund Olesen 81eb18df34 Fix typo.
llvm-svn: 126805
2011-03-02 00:33:01 +00:00
Jakob Stoklund Olesen 1dd377d8c8 Move more fragments of spill weight calculation into CalcSpillWeights.h
Simplify the spill weight calculation a bit by bypassing
getApproximateInstructionCount() and using LiveInterval::getSize() directly.
This changes the computed spill weights, but only by a constant factor in each
function. It should not affect how spill weights compare against each other, and
so it shouldn't affect code generation.

llvm-svn: 125530
2011-02-14 23:15:38 +00:00
Jakob Stoklund Olesen b1b76adbd9 Move calcLiveBlockInfo() and the BlockInfo struct into SplitAnalysis.
No functional changes intended.

llvm-svn: 125231
2011-02-09 22:50:26 +00:00
Jakob Stoklund Olesen f2b16dc847 Add LiveIntervals::addKillFlags() to recompute kill flags after register allocation.
This is a lot easier than trying to get kill flags right during live range
splitting and rematerialization.

llvm-svn: 125113
2011-02-08 21:13:03 +00:00
Jakob Stoklund Olesen 55fc1d0b3e Add LiveIntervals::shrinkToUses().
After uses of a live range are removed, recompute the live range to only cover
the remaining uses. This is necessary after rematerializing the value before
some (but not all) uses.

llvm-svn: 125058
2011-02-08 00:03:05 +00:00
Jakob Stoklund Olesen e8ac8e93a1 Apparently, it is possible for a block with a landing pad successor to have no calls.
In that case we simply ignore the landing pad and split live ranges before the
first terminator.

llvm-svn: 124907
2011-02-04 23:11:13 +00:00
Jakob Stoklund Olesen 096bd8837f Add LiveIntervals::getLastSplitPoint().
A live range cannot be split everywhere in a basic block. A split must go before
the first terminator, and if the variable is live into a landing pad, the split
must happen before the call that can throw.

llvm-svn: 124894
2011-02-04 19:33:11 +00:00
Jakob Stoklund Olesen 2fb5b31578 Simplify a bunch of isVirtualRegister() and isPhysicalRegister() logic.
These functions not longer assert when passed 0, but simply return false instead.

No functional change intended.

llvm-svn: 123155
2011-01-10 02:58:51 +00:00
Jakob Stoklund Olesen 1331a15b0c Replace TargetRegisterInfo::printReg with a PrintReg class that also works without a TRI instance.
Print virtual registers numbered from 0 instead of the arbitrary
FirstVirtualRegister. The first virtual register is printed as %vreg0.
TRI::NoRegister is printed as %noreg.

llvm-svn: 123107
2011-01-09 03:05:53 +00:00
Jakob Stoklund Olesen 9beef41f2c Fix emergency spilling in LiveIntervals::spillPhysRegAroundRegDefsUses.
Always spill the full representative register at any point where any subregister
is live.

This fixes PR8620 which caused the old logic to get confused and not spill
anything at all.

The fundamental problem here is that the coalescer is too aggressive about
physical register coalescing. It sometimes makes it impossible to allocate
registers without these emergency spills.

llvm-svn: 119375
2010-11-16 19:55:14 +00:00
Jakob Stoklund Olesen e2b8858611 Fix PR8612 in the standard spiller, take two.
The live range of a register defined by an early clobber starts at the use slot,
not the def slot.

Except when it is an early clobber tied to a use operand. Then it starts at the
def slot like a standard def.

llvm-svn: 119305
2010-11-16 00:40:59 +00:00
Jakob Stoklund Olesen 97154f67d9 Revert "Fix PR8612 in the standard spiller as well."
This reverts r119183 which borke the buildbots.

llvm-svn: 119270
2010-11-15 21:51:51 +00:00
Jakob Stoklund Olesen 97825bcbfd Fix PR8612 in the standard spiller as well.
The live range of a register defined by an early clobber starts at the use slot,
not the def slot.

llvm-svn: 119183
2010-11-15 20:55:53 +00:00
Andrew Trick 89eb6a8b94 RABasic is nearly functionally complete. There are a few remaining
benchmarks hitting an assertion.
Adds LiveIntervalUnion::collectInterferingVRegs.
Fixes "late spilling" by checking for any unspillable live vregs among
all physReg aliases.

llvm-svn: 118701
2010-11-10 19:18:47 +00:00
Jakob Stoklund Olesen b7050233fb Teach MachineBasicBlock::print() to annotate instructions and blocks with
SlotIndexes when available.

llvm-svn: 117392
2010-10-26 20:21:46 +00:00
Owen Anderson 8ac477ffb5 Begin adding static dependence information to passes, which will allow us to
perform initialization without static constructors AND without explicit initialization
by the client.  For the moment, passes are required to initialize both their
(potential) dependencies and any passes they preserve.  I hope to be able to relax
the latter requirement in the future.

llvm-svn: 116334
2010-10-12 19:48:12 +00:00
Jakob Stoklund Olesen 57feeed92f Replace FindLiveRangeContaining() with getVNInfoAt() in LiveIntervalAnalysis.
This helps hiding the LiveRange class which really should be private.

llvm-svn: 116244
2010-10-11 21:45:03 +00:00
Owen Anderson df7a4f2515 Now with fewer extraneous semicolons!
llvm-svn: 115996
2010-10-07 22:25:06 +00:00
Lang Hames 564956867e Removed VNInfo::isDefAccurate(). Def "accuracy" can be checked by testing whether LiveIntervals::getInstructionFromIndex(def) returns NULL.
llvm-svn: 114791
2010-09-25 12:04:16 +00:00
Jakob Stoklund Olesen bc71af341e Remove SlotIndex::PHI_BIT. It is no longer used by anything.
llvm-svn: 114779
2010-09-25 00:45:18 +00:00
Evan Cheng 16bfe5b0f5 PHI elimination shouldn't require machineloopinfo since it's used at -O0. Move the requirement to LiveIntervalAnalysis instead. Note this does not change the number of times machineloopinfo is computed.
llvm-svn: 111285
2010-08-17 21:00:37 +00:00
Jakob Stoklund Olesen 073cd8004a Remove trailing whitespace.
llvm-svn: 110944
2010-08-12 20:01:23 +00:00
Jakob Stoklund Olesen 0c18757c9d Oops. Don't normalize spill weights twice.
When the normalizeSpillWeights function was introduced, I forgot to remove this
normalization.

This change could affect register allocation. Hopefully for the better.

llvm-svn: 110119
2010-08-03 17:21:16 +00:00
Owen Anderson a57b97e7e7 Fix batch of converting RegisterPass<> to INTIALIZE_PASS().
llvm-svn: 109045
2010-07-21 22:09:45 +00:00
Jakob Stoklund Olesen 37c42a3d02 Remove many calls to TII::isMoveInstr. Targets should be producing COPY anyway.
TII::isMoveInstr is going tobe completely removed.

llvm-svn: 108507
2010-07-16 04:45:42 +00:00
Jakob Stoklund Olesen b5c899d11b Fix small bug in isMoveInstr -> COPY translation
llvm-svn: 108013
2010-07-09 20:55:49 +00:00
Jakob Stoklund Olesen bd953d1805 Change TII::foldMemoryOperand API to require the machine instruction to be
inserted in a MBB, and return an already inserted MI.

This target API change is necessary to allow foldMemoryOperand to call
storeToStackSlot and loadFromStackSlot when folding a COPY to a stack slot
reference in a target independent way.

The foldMemoryOperandImpl hook is going to change in the same way, but I'll wait
until COPY folding is actually implemented. Most targets only fold copies and
won't need to specialize this hook at all.

llvm-svn: 107991
2010-07-09 17:29:08 +00:00
Jakob Stoklund Olesen 00264624a9 Convert EXTRACT_SUBREG to COPY when emitting machine instrs.
EXTRACT_SUBREG no longer appears as a machine instruction. Use COPY instead.

Add isCopy() checks in many places using isMoveInstr() and isExtractSubreg().
The isMoveInstr hook will be removed later.

llvm-svn: 107879
2010-07-08 16:40:22 +00:00
Jakob Stoklund Olesen a1e883dcf6 Remove references to INSERT_SUBREG after de-SSA.
Fix X86InstrInfo::convertToThreeAddressWithLEA to generate COPY instead of
INSERT_SUBREG.

llvm-svn: 107878
2010-07-08 16:40:15 +00:00
Jakob Stoklund Olesen f0e551d4f4 Revert "Remove references to INSERT_SUBREG after de-SSA" r107725.
Buildbot breakage.

llvm-svn: 107744
2010-07-07 00:32:25 +00:00
Jakob Stoklund Olesen e2d3067f6b Remove references to INSERT_SUBREG after de-SSA
llvm-svn: 107732
2010-07-06 23:40:35 +00:00
Jakob Stoklund Olesen 70ee3ecd33 Convert INSERT_SUBREG to COPY in TwoAddressInstructionPass.
INSERT_SUBREG will now only appear in SSA machine instructions.

Fix the handling of partial redefs in ProcessImplicitDefs. This is now relevant
since partial redef COPY instructions appear.

llvm-svn: 107726
2010-07-06 23:26:25 +00:00
Jakob Stoklund Olesen 4c82a9e7d0 Detect and handle COPY in many places.
This code is transitional, it will soon be possible to eliminate
isExtractSubreg, isInsertSubreg, and isMoveInstr in most places.

llvm-svn: 107547
2010-07-03 00:04:37 +00:00
Benjamin Kramer a000002428 VNInfos don't need to be destructed anymore.
llvm-svn: 106943
2010-06-26 11:30:59 +00:00
Jakob Stoklund Olesen 55d738e2e1 Don't track kills in VNInfo. Use interval ends instead.
The VNInfo.kills vector was almost unused except for all the code keeping it
updated. The few places using it were easily rewritten to check for interval
ends instead.

The two new methods LiveInterval::killedAt and killedInRange are replacements.

This brings us down to 3 independent data structures tracking kills.

llvm-svn: 106905
2010-06-25 22:53:05 +00:00