Indicates in the TargetLowering interface that conversions from CC logic to
bitwise logic are allowed. Adds tests that show the benefit when optimization
opportunities are detected. Also adds tests that show that when the optimization
is not applied correct code is generated (but opportunities for other
optimizations remain).
Differential Revision: https://reviews.llvm.org/D59596
Patch by Luís Marques.
llvm-svn: 356740
AtomicCmpSwapWithSuccess is legalised into an AtomicCmpSwap plus a comparison.
This requires an extension of the value which, by default, is a
zero-extension. When we later lower AtomicCmpSwap into a PseudoCmpXchg32 and then expanded in
RISCVExpandPseudoInsts.cpp, the lr.w instruction does a sign-extension.
This mismatch of extensions causes the comparison to fail when the compared
value is negative. This change overrides TargetLowering::getExtendForAtomicOps
for RISC-V so it does a sign-extension instead.
Differential Revision: https://reviews.llvm.org/D58829
Patch by Ferran Pallarès Roca.
llvm-svn: 355869
This requires a little extra work due tothe fact i32 is not a legal type. When
call lowering happens post-legalisation (e.g. when an intrinsic was inserted
during legalisation). A bitcast from f32 to i32 can't be introduced. This is
similar to the challenges with RV32D. To handle this, we introduce
target-specific DAG nodes that perform bitcast+anyext for f32->i64 and
trunc+bitcast for i64->f32.
Differential Revision: https://reviews.llvm.org/D53235
llvm-svn: 352807
Follow the same custom legalisation strategy as used in D57085 for
variable-length shifts (see that patch summary for more discussion). Although
we may lose out on some late-stage DAG combines, I think this custom
legalisation strategy is ultimately easier to reason about.
There are some codegen changes in rv64m-exhaustive-w-insts.ll but they are all
neutral in terms of the number of instructions.
Differential Revision: https://reviews.llvm.org/D57096
llvm-svn: 352171
The previous DAG combiner-based approach had an issue with infinite loops
between the target-dependent and target-independent combiner logic (see
PR40333). Although this was worked around in rL351806, the combiner-based
approach is still potentially brittle and can fail to select the 32-bit shift
variant when profitable to do so, as demonstrated in the pr40333.ll test case.
This patch instead introduces target-specific SelectionDAG nodes for
SHLW/SRLW/SRAW and custom-lowers variable i32 shifts to them. pr40333.ll is a
good example of how this approach can improve codegen.
This adds DAG combine that does SimplifyDemandedBits on the operands (only
lower 32-bits of first operand and lower 5 bits of second operand are read).
This seems better than implementing SimplifyDemandedBitsForTargetNode as there
is no guarantee that would be called (and it's not for e.g. the anyext return
test cases). Also implements ComputeNumSignBitsForTargetNode.
There are codegen changes in atomic-rmw.ll and atomic-cmpxchg.ll but the new
instruction sequences are semantically equivalent.
Differential Revision: https://reviews.llvm.org/D57085
llvm-svn: 352169
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
DAGTypeLegalizer::PromoteSetCCOperands currently prefers to zero-extend
operands when it is able to do so. For some targets this is more expensive
than a sign-extension, which is also a valid choice. Introduce the
isSExtCheaperThanZExt hook and use it in the new SExtOrZExtPromotedInteger
helper. On RISC-V, we prefer sign-extension for FromTy == MVT::i32 and ToTy ==
MVT::i64, as it can be performed using a single instruction.
Differential Revision: https://reviews.llvm.org/D52978
llvm-svn: 347977
Utilise a similar ('late') lowering strategy to D47882. The changes to
AtomicExpandPass allow this strategy to be utilised by other targets which
implement shouldExpandAtomicCmpXchgInIR.
All cmpxchg are lowered as 'strong' currently and failure ordering is ignored.
This is conservative but correct.
Differential Revision: https://reviews.llvm.org/D48131
llvm-svn: 347914
r343712 performed this optimisation during instruction selection. As Eli
Friedman pointed out in post-commit review, implementing this as a DAGCombine
might allow opportunities for further optimisations.
llvm-svn: 343741
Introduce a new RISCVExpandPseudoInsts pass to expand atomic
pseudo-instructions after register allocation. This is necessary in order to
ensure that register spills aren't introduced between LL and SC, thus breaking
the forward progress guarantee for the operation. AArch64 does something
similar for CmpXchg (though only at O0), and Mips is moving towards this
approach (see D31287). See also [this mailing list
post](http://lists.llvm.org/pipermail/llvm-dev/2016-May/099490.html) from
James Knight, which summarises the issues with lowering to ll/sc in IR or
pre-RA.
See the [accompanying RFC
thread](http://lists.llvm.org/pipermail/llvm-dev/2018-June/123993.html) for an
overview of the lowering strategy.
Differential Revision: https://reviews.llvm.org/D47882
llvm-svn: 342534
This function is not virtual, it is private and it is not called anywhere. No
regression is introduced by removing it.
I think we can safely remove it.
Differential Revision: https://reviews.llvm.org/D50836
llvm-svn: 340024
- Save/restore only registers that are used.
This includes Callee saved registers and Caller saved registers
(arguments and temporaries) for integer and FP registers.
- If there is a call in the interrupt handler, save/restore all
Caller saved registers (arguments and temporaries) and all FP registers.
- Emit special return instructions depending on "interrupt"
attribute type.
Based on initial patch by Zhaoshi Zheng.
Reviewers: asb
Reviewed By: asb
Subscribers: rkruppe, the_o, MartinMosbeck, brucehoult, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D48411
llvm-svn: 338047
Fences are inserted according to table A.6 in the current draft of version 2.3
of the RISC-V Instruction Set Manual, which incorporates the memory model
changes and definitions contributed by the RISC-V Memory Consistency Model
task group.
Instruction selection failures will now occur for 8/16/32-bit atomicrmw and
cmpxchg operations when targeting RV32IA until lowering for these operations
is added in a follow-on patch.
Differential Revision: https://reviews.llvm.org/D47589
llvm-svn: 334591
I'm unable to construct a representative test case that demonstrates the
advantage, but it seems sensible to report accurate target-specific
information regardless.
llvm-svn: 330938
This has no impact on codegen for the current RISC-V unit tests or my small
benchmark set and very minor changes in a few programs in the GCC torture
suite. Based on this, I haven't been able to produce a representative test
program that demonstrates a benefit from isLegalAddressingMode. I'm committing
the patch anyway, on the basis that presenting accurate information to the
target-independent code is preferable to relying on incorrect generic
assumptions.
llvm-svn: 330932
fadd.d is required in order to force floating point registers to be used in
test code, as parameters are passed in integer registers in the soft float
ABI.
Much of this patch is concerned with support for passing f64 on RV32D with a
soft-float ABI. Similar to Mips, introduce pseudoinstructions to build an f64
out of a pair of i32 and to split an f64 to a pair of i32. BUILD_PAIR and
EXTRACT_ELEMENT can't be used, as a BITCAST to i64 would be necessary, but i64
is not a legal type.
llvm-svn: 329871
Includes support for expanding va_copy. Also adds support for using 'aligned'
registers when necessary for vararg calls, and ensure the frame pointer always
points to the bottom of the vararg spill region. This is necessary to ensure
that the saved return address and stack pointer are always available at fixed
known offsets of the frame pointer.
Differential Revision: https://reviews.llvm.org/D40805
llvm-svn: 322215
The TableGen-based calling convention definitions are inflexible, while
writing a function to implement the calling convention is very
straight-forward, and allows difficult cases to be handled more easily. With
this patch adds support for:
* Passing large scalars according to the RV32I calling convention
* Byval arguments
* Passing values on the stack when the argument registers are exhausted
The custom CC_RISCV calling convention is also used for returns.
This patch also documents the ABI lowering that a language frontend is
expected to perform. I would like to work to simplify these requirements over
time, but this will require further discussion within the LLVM community.
We add PendingArgFlags CCState, as a companion to PendingLocs.
The PendingLocs vector is used by a number of backends to handle arguments
that are split during legalisation. However CCValAssign doesn't keep track of
the original argument alignment. Therefore, add a PendingArgFlags vector which
can be used to keep track of the ISD::ArgFlagsTy for every value added to
PendingLocs.
Differential Revision: https://reviews.llvm.org/D39898
llvm-svn: 320359
Previous patches primarily ensured that codegen was possible for the standard
RISC-V instructions. However, there are a number of IR inputs that wouldn't be
appropriately lowered. This patch both adds test cases and supports lowering
for a number of these cases:
* Improved sext/zext/trunc support
* Support for setcc variants that don't map directly to RISC-V instructions
* Lowering mul, and hence support for external symbols
* addc, adde, subc, sube
* mulhs, srem, mulhu, urem, udiv, sdiv
* {srl,sra,shl}_parts
* brind
* br_jt
* bswap, ctlz, cttz, ctpop
* rotl, rotr
* BlockAddress operands
Differential Revision: https://reviews.llvm.org/D29938
llvm-svn: 318737
Although ISD::SELECT_CC is a more natural match for RISCVISD::SELECT_CC (and
ultimately the integer RISC-V conditional branch instructions), we choose to
expand ISD::SELECT_CC and lower ISD::SELECT. The appropriate compare+branch
will be created in the case where an ISD::SELECT condition value is created by
an ISD::SETCC node, which operates on XLen types. Other datatypes such as
floating point don't have conditional branch instructions, and lowering
ISD::SELECT allows more flexibility for handling these cases.
Differential Revision: https://reviews.llvm.org/D29937
llvm-svn: 318735
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Note that this is just enough for simple function call examples to generate
working code. Support for varargs etc follows in future patches.
Differential Revision: https://reviews.llvm.org/D29936
llvm-svn: 317691
This adds the minimum necessary to support codegen for simple ALU operations
on RV32. Prolog and epilog insertion, support for memory operations etc etc
follow in future patches.
Leave guessInstructionProperties=1 until https://reviews.llvm.org/D37065 is
reviewed and lands.
Differential Revision: https://reviews.llvm.org/D29933
llvm-svn: 316188
Alex Bradbury