Summary:
The -mcpu=mips16 option caused the Integrated Assembler to crash because
it couldn't figure out the architecture revision number to write to the
.MIPS.abiflags section. This CPU definition has been removed because, like
microMIPS, MIPS16 is an ASE to a base architecture.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13656
llvm-svn: 250407
Summary:
The P5600 is an out-of-order, superscalar implementation of the MIPS32R5
architecture.
The scheduler has a few missing details (see the 'Tricky Instructions'
section and some quirks of the P5600 are deliberately omitted due to
implementation difficulty and low chance of significant benefit (e.g. the
predicate on P5600WriteEitherALU). However, testing on SingleSource is
showing significant performance benefits on some apps (seven in the 10-30%
range) and only one significant regression (12%) when
-pre-RA-sched=linearize is given. Without -pre-RA-sched=linearize the
results are more variable. Some do even better (up to 55% improvement) but
increased numbers of copies are slowing others down (up to 12%).
Overall, the scheduler as it currently stands is a 2.4% win with
-pre-RA-sched=linearize and a 2.7% win without -pre-RA-sched=linearize.
I'm sure we can improve on this further.
For completeness, the FPGA this was tested on shows some failures with and
without the P5600 scheduler. These appear to be scheduling related since
the two test runs have fairly different sets of failing tests even after
accounting for other factors (e.g. spurious connection failures) however
it's not P5600 specific since we also get some for the generic scheduler.
Reviewers: vkalintiris
Subscribers: mpf, llvm-commits, atrick, vkalintiris
Differential Revision: http://reviews.llvm.org/D12193
llvm-svn: 248725
Summary:
Added support for the following instructions:
CACHEE, LBE, LBUE, LHE, LHUE, LWE, LLE, LWLE, LWRE, PREFE,
SBE, SHE, SWE, SCE, SWLE, SWRE, TLBINV, TLBINVF
This required adding some infrastructure for the EVA ASE.
Patch by Scott Egerton.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11139
llvm-svn: 247669
Summary: This will enable the IAS to reject floating point instructions if soft-float is enabled.
Reviewers: dsanders, echristo
Reviewed By: dsanders
Subscribers: jfb, llvm-commits, mpf
Differential Revision: http://reviews.llvm.org/D9053
llvm-svn: 236713
Summary:
These ISA's didn't add any instructions so they are almost identical to
Mips32r2 and Mips64r2. Even the ELF e_flags are the same, However the ISA
revision in .MIPS.abiflags is 3 or 5 respectively instead of 2.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: tomatabacu, llvm-commits, atanasyan
Differential Revision: http://reviews.llvm.org/D7381
llvm-svn: 229695
than on MipsSubtargetInfo.
This required a bit of massaging in the MC level to handle this since
MC is a) largely a collection of disparate classes with no hierarchy,
and b) there's no overarching equivalent to the TargetMachine, instead
only the subtarget via MCSubtargetInfo (which is the base class of
TargetSubtargetInfo).
We're now storing the ABI in both the TargetMachine level and in the
MC level because the AsmParser and the TargetStreamer both need to
know what ABI we have to parse assembly and emit objects. The target
streamer has a pointer to the one in the asm parser and is updated
when the asm parser is created. This is fragile as the FIXME comment
notes, but shouldn't be a problem in practice since we always
create an asm parser before attempting to emit object code via the
assembler. The TargetMachine now contains the ABI so that the DataLayout
can be constructed dependent upon ABI.
All testcases have been updated to use the -target-abi command line
flag so that we can set the ABI without using a subtarget feature.
Should be no change visible externally here.
llvm-svn: 227102
Summary:
No functional change yet, it's just an object replacement for an enum.
It will allow us to gather ABI information in a single place so that we can
start testing for properties of the ABI's instead of the ABI itself.
For example we will eventually be able to use:
ABI.MinStackAlignmentInBytes()
instead of:
(isABI_N32() || isABI_N64()) ? 16 : 8
which is clearer and more maintainable.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3341
llvm-svn: 220568
Also added the testcase that should have been in r215194.
This behaviour has surprised me a few times now. The problem is that the
generated MipsSubtarget::ParseSubtargetFeatures() contains code like this:
if ((Bits & Mips::FeatureABICalls) != 0) IsABICalls = true;
so '-abicalls' means 'leave it at the default' and '+abicalls' means 'set it to
true'. In this case, (and the similar -modd-spreg case) I'd like the code to be
IsABICalls = (Bits & Mips::FeatureABICalls) != 0;
or possibly:
if ((Bits & Mips::FeatureABICalls) != 0)
IsABICalls = true;
else
IsABICalls = false;
and preferably arrange for 'Bits & Mips::FeatureABICalls' to be true by default
(on some triples).
llvm-svn: 215211
This patch implements the main rules for -mno-abicalls such as reserving $gp,
and emitting the correct .option directive.
Patch by Matheus Almeida and Toma Tabacu
Differential Revision: http://reviews.llvm.org/D4231
llvm-svn: 215194
Summary:
When -mno-odd-spreg is in effect, 32-bit floating point values are not
permitted in odd FPU registers. The option also prohibits 32-bit and 64-bit
floating point comparison results from being written to odd registers.
This option has three purposes:
* It allows support for certain MIPS implementations such as loongson-3a that
do not allow the use of odd registers for single precision arithmetic.
* When using -mfpxx, -mno-odd-spreg is the default and this allows us to
statically check that code is compliant with the O32 FPXX ABI since mtc1/mfc1
instructions to/from odd registers are guaranteed not to appear for any
reason. Once this has been established, the user can then re-enable
-modd-spreg to regain the use of all 32 single-precision registers.
* When using -mfp64 and -mno-odd-spreg together, an O32 extension named
O32 FP64A is used as the ABI. This is intended to provide almost all
functionality of an FR=1 processor but can also be executed on a FR=0 core
with the assistance of a hardware compatibility mode which emulates FR=0
behaviour on an FR=1 processor.
* Added '.module oddspreg' and '.module nooddspreg' each of which update
the .MIPS.abiflags section appropriately
* Moved setFpABI() call inside emitDirectiveModuleFP() so that the caller
doesn't have to remember to do it.
* MipsABIFlags now calculates the flags1 and flags2 member on demand rather
than trying to maintain them in the same format they will be emitted in.
There is one portion of the -mfp64 and -mno-odd-spreg combination that is not
implemented yet. Moves to/from odd-numbered double-precision registers must not
use mtc1. I will fix this in a follow-up.
Differential Revision: http://reviews.llvm.org/D4383
llvm-svn: 212717
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-3 that was available in MIPS32R2.
To limit the number of tests required, only one 32-bit and one 64-bit ISA
prior to MIPS32/MIPS64 are tested.
rdhwr has been deliberately left without an ISA annotation for now. This is
because the assembler and CodeGen disagree on when the instruction is
available. Strictly speaking, it is only available in MIPS32r2 and
MIPS64r2. However, it is emulated by a kernel trap on earlier ISA's and is
necessary for TLS so CodeGen should emit it on older ISA's too.
Depends on D3696
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3697
llvm-svn: 208690
Summary: The 'mul' line of the test is temporarily commented out because it currently matches the MIPS32 mul instead of the MIPS32r6 mul. This line will be uncommented when we disable the MIPS32 mul on MIPS32r6.
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3668
llvm-svn: 208576
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-V that was available in MIPS32R2
Most of these instructions are correctly rejected but with the wrong error
message. These have been placed in a separate test for now. It happens
because many of the MIPS V instructions have not been implemented.
Depends on D3694
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3695
llvm-svn: 208546
Summary:
DCL[ZO] are now correctly marked as being MIPS64 instructions. This has no
effect on the CodeGen tests since expansion of i64 prevented their use
anyway.
The check for MIPS16 to prevent the use of CLZ no longer prevents DCLZ as
well. This is not a functional change since DCLZ is still prohibited by
being a MIPS64 instruction (MIPS16 is only compatible with MIPS32).
No functional change
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3694
llvm-svn: 208544
Summary:
dsbh and dshd are not available on Mips32r2. No codegen test changes
required since expansion of i64 prevented the use of these instructions
anyway.
Depends on D3690
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3692
llvm-svn: 208542
Summary:
No functional change.
The minor change to the MIPS16 code is in preparation for a patch that will handle 32-bit FPIdx instructions separately to 64-bit (because they were added in different revisions)
Depends on D3677
Reviewers: rkotler, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3690
llvm-svn: 208541
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-IV that was available in MIPS32
A small number of instructions are correctly rejected but with the wrong error
message. These have been placed in a separate test for now.
Depends on D3676
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3677
llvm-svn: 208414
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-III that was available in MIPS32
A small number of instructions are correctly rejected but with the wrong error
message. These have been placed in a separate test for now.
There's some obvious InstAlias's that ought to be marked MIPS-III but arent.
This is because they are not currently tested. I intend to catch these with
a final pass through the tablegen records to find tablegen records without
ISA annotations.
Depends on D3674
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3675
llvm-svn: 208408
Summary:
Adds MIPS32r6/MIPS64r6 and checks the compatibility requirements for these
processors.
I've also included comments to describe removed and re-encoded instructions,
along with placeholder def's for the new instructions but there are no
functional changes to codegen at this point.
Reviewers: jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3622
llvm-svn: 208399
Summary:
These processors will only be available for the integrated assembler at
first (CodeGen will emit a fatal error saying they are not implemented).
The intention is to work through the existing instructions and correctly
annotate the ISA they were added in so that we have a sufficiently good
base to start MIPS64r6 development. MIPS64r6 removes/re-encodes certain
instructions and I believe it is best to define ISA's using set-union's
as far as possible rather than using set-subtraction.
Reviewers: vmedic
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D3569
llvm-svn: 208221
Summary:
One small functional change. The recently added PAUSE instruction now has
the HasStdEnc predicate which was accidentally removed by a Requires<>.
Depends on D3640
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3641
llvm-svn: 208209
Summary:
Move IsGP64bit into GPRPredicates, and IsFP64bit/NotFP64bit into FGRPredicates
No functional change (confirmed by diffing tablegen-erated files).
Depends on D3639
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3640
llvm-svn: 208201
Summary:
The overall idea is to chop the Predicates list into subsets that are
usually overridden independently. This allows subclasses to partially
override the predicates of their superclasses without having to re-add all
the existing predicates.
This patch starts the process by moving HasStdEnc into a new
EncodingPredicates list and almost everything else into
AdditionalPredicates.
It has revealed a couple likely bugs where 'let Predicates' has removed
the HasStdEnc predicate.
No functional change (confirmed by diffing tablegen-erated files).
Depends on D3549, D3506
Reviewers: vmedic
Differential Revision: http://reviews.llvm.org/D3550
llvm-svn: 208184
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).
Differential Revision: http://reviews.llvm.org/D3346
llvm-svn: 206396
Summary:
It is now the smallest superset for these ISA's.
FeatureMips4 now contains FeatureFPIdx since [ls][dw]xc1 were added in MIPS-IV.
Made the FPIdx feature bit lowercase so that it can be used in the -mattr option.
Depends on D3274
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3275
llvm-svn: 205964
Summary:
Adds the 'mips4' processor and a simple test of the ELF e_flags.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
I made one small change to the testcase so that it uses
mips64-unknown-linux instead of mips4-unknown-linux.
This patch indirectly adds FeatureCondMov to FeatureMips64. This is ok
because it's supposed to be there anyway and it turns out that
FeatureCondMov is not a predicate of any instructions at the moment
(this is a bug that hasn't been noticed because there are no targets
without the conditional move instructions yet).
CC: theraven
Differential Revision: http://llvm-reviews.chandlerc.com/D3244
llvm-svn: 205530
The Octeon cpu from Cavium Networks is mips64r2 based and has an extended
instruction set. In order to utilize this with LLVM, a new cpu feature "octeon"
and a subtarget feature "cnmips" is added. A small set of new instructions
(baddu, dmul, pop, dpop, seq, sne) is also added. LLVM generates dmul, pop and
dpop instructions with option -mcpu=octeon or -mattr=+cnmips.
llvm-svn: 204337
Summary:
This removes the need to coerce UnknownABI to the default ABI (O32 for
MIPS32, N64 for MIPS64 [*]) in both MipsSubtarget and MipsAsmParser.
Clang has been updated to disable both possible default ABI's before enabling
the ABI it intends to use.
[*] N64 being the default for MIPS64 is not actually correct.
However N32 is not fully implemented/tested yet.
Depends on: D2830
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2832
Differential Revision: http://llvm-reviews.chandlerc.com/D2846
llvm-svn: 201792
* msa SubtargetFeature
* registers
* ld.[bhwd], and st.[bhwd] instructions
Does not correctly prohibit use of both 32-bit FPU registers and MSA together.
Patch by Daniel Sanders
llvm-svn: 188313
This calling convention was added just to handle functions which return vector
of floats. The fix committed in r165585 solves the problem.
llvm-svn: 176530
llc to recognize MIPS16 as a MIPS ASE extension. -mips16 will mean the
mips16 ASE for mips32 by default.
As part of fixing of adding this we discovered some small changes that
need to be made to MipsInstrInfo::storeRegToStackSLot and
MipsInstrInfo::loadRegFromStackSlot. We were using some "==" equality tests
where in fact we should have been using Mips::<regclas>.hasSubClassEQ instead,
per suggestion of Jakob Stoklund Olesen.
Patch by Reed Kotler.
llvm-svn: 156958
instruction supported by mips32r2, and add a pattern which replaces bswap with
a ROTR and WSBH pair.
WSBW is removed since it is not an instruction the current architectures
support.
llvm-svn: 147015
Craig Topper