glibc can use one of 2 layouts for semaphores: architectures that
don't HAVE_64B_ATOMIC use an uint32_t field with semaphore value,
then a private field, then a waiting thread count field - this is
the layout currently assumed by the test. However, HAVE_64B_ATOMIC
arches use a fused uint64_t field that contains the value in low bits
and waiting thread count in high bits, followed by a private field.
This resulted in taking private field from the wrong offset on 64-bit
atomic platforms (the test still passed, but didn't actually test
the private field). On big-endian platforms, this resulted in a fail,
since the first 4 bytes overlay the thread count field, and not
the value field.
Found while porting ASan to s390x.
Patch by Marcin Kościelnicki.
llvm-svn: 265715
Summary:
Adds strnlen to the common interceptors, under the existing flag
intercept_strlen.
Removes the now-duplicate strnlen interceptor from asan and msan.
This adds strnlen to tsan, which previously did not intercept it.
Adds a new test of strnlen to the sanitizer_common test cases.
Reviewers: samsonov
Subscribers: zhaoqin, llvm-commits, kcc
Differential Revision: http://reviews.llvm.org/D18397
llvm-svn: 264195
Summary: This is an initial setup in order to move some additional tests from Linux onto Posix.
I also moved decorate_proc_maps onto the Linux directory
Finally added msan's definition for "stable-runtime".
Only a test requires it, and its commit message (r248014) seems to imply
that AArch64 is problematic with MSan.
Reviewers: samsonov, rengolin, t.p.northover, eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17928
llvm-svn: 263142
Test cases definitely should not care about the complete set of architectures
supported by compiler-rt - they should only care about current
architecture that the test suite was configured for.
Introduce new lit feature to reflect this, and convert tests to use it.
llvm-svn: 261603
Summary:
This fixes duplicate test names in the test results, so:
PASS: SanitizerCommon-asan :: fopen_nullptr.c (304 of 431)
PASS: SanitizerCommon-asan :: fopen_nullptr.c (305 of 431)
is now:
PASS: SanitizerCommon-asan-i386-Linux :: fopen_nullptr.c (282 of 431)
PASS: SanitizerCommon-asan-x86_64-Linux :: fopen_nullptr.c (316 of 431)
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16850
llvm-svn: 260227
This patch enables the ptrace syscall interceptors for arm and adds support
for both PTRACE_GETVFPREGS and PTRACE_SETVFPREGS used to get the VFP register
from ARM.
The ptrace tests is also updated with arm and PTRACE_GETVFPREGS tests.
llvm-svn: 251321
Old version of sem_init (GLIBC_2.0) fails to initialize parts of
sem_t that are used in sem_timedwait. This is fixed in GLIBC_2.1,
but since ASan interceptors downgrade sem_* to the oldest available
version, this can introduce bugs that are only present in sanitized
build. Workaround by zero-initializing sem_t in sem_init.
llvm-svn: 250113
This is an implementation of
https://github.com/google/sanitizers/issues/579
It has a number of advantages over the current mapping:
* Works for non-PIE executables.
* Does not require ASLR; as a consequence, debugging MSan programs in
gdb no longer requires "set disable-randomization off".
* Supports linux kernels >=4.1.2.
* The code is marginally faster and smaller.
This is an ABI break. We never really promised ABI stability, but
this patch includes a courtesy escape hatch: a compile-time macro
that reverts back to the old mapping layout.
llvm-svn: 249754
This patch enabled msan for aarch64 with 39-bit VMA and 42-bit VMA.
As defined by lib/msan/msan.h the memory layout used is for 39-bit is:
00 0000 0000 - 40 0000 0000: invalid
40 0000 0000 - 43 0000 0000: shadow
43 0000 0000 - 46 0000 0000: origin
46 0000 0000 - 55 0000 0000: invalid
55 0000 0000 - 56 0000 0000: app (low)
56 0000 0000 - 70 0000 0000: invalid
70 0000 0000 - 80 0000 0000: app (high)
And for 42-bit VMA:
000 0000 0000 - 100 0000 0000: invalid
100 0000 0000 - 11b 0000 0000: shadow
11b 0000 0000 - 120 0000 0000: invalid
120 0000 0000 - 13b 0000 0000: origin
13b 0000 0000 - 2aa 0000 0000: invalid
2aa 0000 0000 - 2ab 0000 0000: app (low)
2ab 0000 0000 - 3f0 0000 0000: invalid
3f0 0000 0000 - 400 0000 0000: app (high)
Most of tests are passing with exception of:
* Linux/mallinfo.cc
* chained_origin_limits.cc
* dlerror.cc
* param_tls_limit.cc
* signal_stress_test.cc
* nonnull-arg.cpp
The 'Linux/mallinfo.cc' is due the fact AArch64 returns the sret in 'x8'
instead of default first argument 'x1'. So a function prototype that
aims to mimic (by using first argument as the return of function) won't
work. For GCC one can make a register alias (register var asm ("r8")), but
for clang it detects is an unused variable and generate wrong code.
The 'chained_origin_limits' is probably due a wrong code generation,
since it fails only when origin memory is used
(-fsanitize-memory-track-origins=2) and only in the returned code
(return buf[50]).
The 'signal_streess_test' and 'nonnull-arg' are due currently missing variadic
argument handling in memory sanitizer code instrumentation on LLVM side.
Both 'dlerror' and 'param_tls_test' are unknown failures that require
further investigation.
All the failures are XFAIL for aarch64 for now.
llvm-svn: 247809
Summary:
Teach all sanitizers to call abort() instead of _exit() after printing
an error report, if requested. This behavior is the default on Mac OS.
Reviewers: kcc, kubabrecka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12332
llvm-svn: 246205
This follows the approach we use in ASan and UBSan lit tests to setup
tool options in a portable way, and to provide a nice way to specify
testsuite-wide defaults.
llvm-svn: 246058
Summary:
There are a number of issues with unit tests on Darwin. These patches address the following:
* Unit tests should be passed -arch (-m32/-m64 isn't sufficient)
* Unit tests should be passed ${DARWIN_osx_CFLAGS} because they're being built for OS X
* Test architectures should be filtered based on base system capabilities (i.e. don't try running x86_64h tests on pre-haswell hardware).
Reviewers: bogner, filcab, kubabrecka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12174
llvm-svn: 245580
This patch enables asan for aarch64/linux. It marks it as 'unstable-release',
since some tests are failing due either kernel missing support of non-executable
pages in mmap or environment instability (infinite loop in juno reference
boards).
It sets decorate_proc_maps test to require stable-release, since the test expects
the shadow memory to not be executable and the support for aarch64 is only
added recently by Linux (da141706aea52c1a9 - 4.0).
It also XFAIL static_tls test for aarch64 linker may omit the __tls_get_addr call
as a TLS optimization.
llvm-svn: 244054
Clang will not define __i686__, even when the target triple is i686,
without -march=i686.
With this patch, the compiler-rt build will successfully detect that
Clang can target i686.
The open_memstream.cc test is a little funny. Before my patch, it
was invoked with "-m32 -m64". To make it work after my -march
change, I had to add '-march=x86-64'.
Differential Revision: http://reviews.llvm.org/D11618
llvm-svn: 243604
include_if_exists=/path/to/sanitizer/options reads flags from the
file if it is present. "%b" in the include file path (for both
variants of the flag) is replaced with the basename of the main
executable.
llvm-svn: 242853
signal_segv_handler.cc occasionally fails due to a suspected kernel bug.
Increasing the mapped region size seems to make the test pass reliably.
llvm-svn: 242647
For open_memstream() files, buffer pointer is only valid immediately after
fflush() or fclose(). Fix the fclose() interceptor to unpoison after the
REAL(fclose) call, not before it.
llvm-svn: 242535
struct sigaction was not initialized. As the result if SA_RESETHAND is set in sa_flags, then the handler is reset after first invocation leading to crash.
Initialize struct sigaction to zero.
Reviewed in http://reviews.llvm.org/D10803
llvm-svn: 240965
This is done by creating a named shared memory region, unlinking it
and setting up a private (i.e. copy-on-write) mapping of that instead
of a regular anonymous mapping. I've experimented with regular
(sparse) files, but they can not be scaled to the size of MSan shadow
mapping, at least on Linux/X86_64 and ext3 fs.
Controlled by a common flag, decorate_proc_maps, disabled by default.
This patch has a few shortcomings:
* not all mappings are annotated, especially in TSan.
* our handling of memset() of shadow via mmap() puts small anonymous
mappings inside larger named mappings, which looks ugly and can, in
theory, hit the mapping number limit.
llvm-svn: 238621
Without the --target flag, clang uses the mips64 triple which selects the n64 abi. We need to add --target=mips-linux-gnu, so that clang can select the correct abi for mips32r2.
Reviewers: dsanders, kcc, samsonov
Subscribers: llvm-commits, mohit.bhakkad, jaydeep
Differential Revision: http://reviews.llvm.org/D9249
llvm-svn: 237675
Summary:
On ppc64le Fedora 21, getpwnam_r("no-such-user", ...) returns ENOENT
instead of 0. Tolerate this in the test case.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9233
llvm-svn: 235654
Long story short: stop-the-world briefly resets SIGSEGV handler to SIG_DFL.
This breaks programs that handle and continue after SIGSEGV (namely JVM).
See the test and comments for details.
This is reincarnation of reverted r229678 (http://reviews.llvm.org/D7722).
Changed:
- execute TracerThreadDieCallback only on tracer thread
- reset global data in TracerThreadSignalHandler/TracerThreadDieCallback
- handle EINTR from waitpid
Add 3 new test:
- SIGSEGV during leak checking
- StopTheWorld operation during signal storm from an external process
- StopTheWorld operation when the program generates and handles SIGSEGVs
http://reviews.llvm.org/D8032
llvm-svn: 231367
Evgeniy Stepanov