This adds Clang-specific DWARF constants for nullability and ObjC
class properties that are already generated by clang. This patch adds
dwarfdump support and a more comprehensive testcase.
<rdar://problem/27335745>
llvm-svn: 275354
See http://reviews.llvm.org/D22079
Changes the Archive::child_begin and Archive::children to require a reference
to an Error. If iterator increment fails (because the archive header is
damaged) the iterator will be set to 'end()', and the error stored in the
given Error&. The Error value should be checked by the user immediately after
the loop. E.g.:
Error Err;
for (auto &C : A->children(Err)) {
// Do something with archive child C.
}
// Check the error immediately after the loop.
if (Err)
return Err;
Failure to check the Error will result in an abort() when the Error goes out of
scope (as guaranteed by the Error class).
llvm-svn: 275316
Since these are named nvvm_* rather than nvptx_*, we also need to
update getArchTypePrefix. It's a bit unusual for getArchTypePrefix not
to match the backend name, but I think this fits the intent of the
function in this case.
llvm-svn: 274890
Summary:
Add renderscript32 and renderscript64 ArchTypes. This is to configure
the ABI requirement on 32-bit RenderScript that 'long' types have 64-bit
size and alignment. 64-bit RenderScript is the same as AArch64, but is
added here for completeness.
Reviewers: echristo, rsmith
Subscribers: aemerson, jfb, rampitec, dschuff, mehdi_amini, llvm-commits, srhines
Differential Revision: http://reviews.llvm.org/D21333
llvm-svn: 274412
This fixes an issue where occurrence counts would be unexpectedly
reset when parsing different parts of a command line multiple
times.
**ORIGINAL COMMIT MESSAGE**
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
llvm-svn: 274171
This gets rid of the memory fence in the hot path (dereferencing the
ManagedStatic), trading for an extra mutex lock in the cold path (when
the ManagedStatic was uninitialized). Since this only happens on the
first accesses it shouldn't matter much. On strict architectures like
x86 this removes any atomic instructions from the hot path.
Also remove the tsan annotations, tsan knows how standard atomics work
so they should be unnecessary now.
llvm-svn: 274131
This allows us to query about the endianness without having to
look at DataLayout. The API will be used (and tested) in lld,
in order to find out the endianness of BitcodeFiles.
Briefly discussed with Rafael.
llvm-svn: 274090
Our existing yaml::Output code writes tags immediately when mapTag is called, without any state handling. This results in tags on sequence elements being written before the element itself. For example, we see this:
SomeArray: !elem_type
- key1: 1
key2: 2 !elem_type2
- key3: 3
key4: 4
We should instead see:
SomeArray:
- !elem_type
key1: 1
key2: 2
- !elem_type2
key3: 3
key4: 4
Our reader handles reading properly, so this bug only impacts writing yaml sequences with tagged elements.
As a test for this I've modified the Mach-O yaml encoding to allways apply the !mach-o tag when encoding MachOYAML::Object entries. This results in the !mach-o tag appearing as expected in dumped fat files.
llvm-svn: 274067
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
Differential Revision: http://reviews.llvm.org/D21485
llvm-svn: 274054
Summary: Actually the list of cached files is sorted by file size, not by last accessed time. Also remove unused file access time param for a helper function.
Reviewers: joker-eph, chandlerc, davide
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21639
llvm-svn: 273852
Darwin added support in its Xcode 8.0 tools (released in the beta) for universal
files where offsets and sizes for the objects are 64-bits to allow support for
objects contained in universal files to be larger then 4gb. The change is very
straight forward. There is a new magic number that differs by one bit, much
like the 64-bit Mach-O files. Then there is a new structure that follow the
fat_header that has the same layout but with the offset and size fields using
64-bit values instead of 32-bit values.
rdar://26899493
llvm-svn: 273207
Trying to expand short names with a relative path doesn't work, so this
first gets the module name to get a full path (which can still have short
names).
llvm-svn: 273171
Some build systems use the short (8.3) file names on Windows, especially if the path has spaces in it. The shortening made it impossible for clang to distinguish between clang.exe, clang++.exe, and clang-cl.exe. So this expands short names in the first argument and does wildcard expansion for the rest.
Differential Revision: http://reviews.llvm.org/D21420
llvm-svn: 272967
- We lacked a short unique identifier for a statistics, so I renamed the
current "Name" field that just contained the DEBUG_TYPE name of the
current file to DebugType and added a new "Name" field that contains
the C++ identifier of the statistic variable.
- Add the -stats-json option which outputs statistics in json format.
Differential Revision: http://reviews.llvm.org/D20995
llvm-svn: 272826
Differential Revision: http://reviews.llvm.org/D19842
Corresponding clang patch: http://reviews.llvm.org/D19843
Re-commit after addressing issues with of generating too many warnings for Windows and asan test failures
Patch by Eric Niebler
llvm-svn: 272555
[cpu-detection] [amdfam10] Return barcelona, and amdfam10 for all other
subtypes. Address Bug 28067.
Along with the refactoring of Host.cpp, getHostCPUName() was modified to
return more precise types for CPUs in amdfam10.
However, callers of getHostCPUName() do string matching on type, so this
cannot be modified.
Currently there is support in the x86 backend for barcelona.
For all other subtypes the assumed return value is amdfam10.
Fix: getHostCPUName() returns barcelona subtype and amdfam10 for all
others. This can be extended further when support for the other subtypes
is added.
Differential revision: http://reviews.llvm.org/D21193
llvm-svn: 272333
Summary: Remove architecture subtype from the string returned by getHostCPUName(). String matching done on type.
Reviewers: llvm-commits, echristo
Subscribers: mehdi_amini
Differential Revision: http://reviews.llvm.org/D21193
llvm-svn: 272328
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
Summary:
Break on all switch cases for outer and inner switches.
No functionality changed.
Reviewers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D21158
llvm-svn: 272228
Summary:
Now DISubroutineType has a 'cc' field which should be a DW_CC_ enum. If
it is present and non-zero, the backend will emit it as a
DW_AT_calling_convention attribute. On the CodeView side, we translate
it to the appropriate enum for the LF_PROCEDURE record.
I added a new LLVM vendor specific enum to the list of DWARF calling
conventions. DWARF does not appear to attempt to standardize these, so I
assume it's OK to do this until we coordinate with GCC on how to emit
vectorcall convention functions.
Reviewers: dexonsmith, majnemer, aaboud, amccarth
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21114
llvm-svn: 272197
The architecture enumeration is shared across ARM and AArch64. However, the
data is not. The code incorrectly would index into the array using the
architecture index which was offset by the ARMv7 architecture enumeration. We
do not have a marker for indicating the architectural family to which the
enumeration belongs so we cannot be clever about offsetting the index (at least
it is not immediately apparent to me). Instead, fall back to the tried-and-true
method of slowly iterating the array (its not a large array, so the impact of
this is not too high).
Because of the incorrect indexing, if we were lucky, we would crash, but usually
we would return an invalid StringRef. We did not have any tests for the AArch64
target parser previously;. Extend the previous tests I had added for ARM to
cover AArch64 for ensuring that we return expected StringRefs.
Take the opportunity to change some iterator types to references.
This work is needed to support parsing `.arch name` directives in the AArch64
target asm parser.
llvm-svn: 272145
Summary:
Following D20970 (committed as r271726).
This is a substantial refactoring of the host CPU detection code.
There is no functionality change intended, but the changes are extensive.
Definitions of architecture types and subtypes are by no means exhaustive or
perfectly defined, but a fair starting point.
Suggestions for futher improvements are welcome.
Reviewers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20988
llvm-svn: 271921
CALL_ONCE_... macro in the legacy pass manager with the new
llvm::call_once facility.
Nothing changed sicne the last attempt in r271781 which I reverted in
r271788. At least one of the failures I saw was spurious, and I want to
make sure the other failures are real before I work around them -- they
appeared to only effect ppc64le and ppc64be.
Original commit message of r271781:
----
[LPM] Reinstate r271652 to replace the CALL_ONCE_... macro in the legacy
pass manager with the new llvm::call_once facility.
This reverts commit r271657 and re-applies r271652 with a fix to
actually work with arguments. In the original version, we just ended up
directly calling std::call_once via ADL because of the std::once_flag
argument. The llvm::call_once never worked with arguments. Now,
llvm::call_once is a variadic template that perfectly forwards
everything. As a part of this it had to move to the header and we use
a generic functor rather than an explict function pointer. It would be
nice to use std::invoke here but we don't have it yet. That means
pointer to members won't work here, but that seems a tolerable
compromise.
I've also tested this by forcing the fallback path, so hopefully it
sticks this time.
----
Original commit message of r271652:
----
[LPM] Replace the CALL_ONCE_... macro in the legacy pass manager with
the new llvm::call_once facility.
This facility matches the standard APIs and when the platform supports
it actually directly uses the standard provided functionality. This is
both more efficient on some platforms and much more TSan friendly.
The only remaining user of the cas_flag and home-rolled atomics is the
fallback implementation of call_once. I have a patch that removes them
entirely, but it needs a Windows patch to land first.
This alone substantially cleans up the macros for the legacy pass
manager, and should subsume some of the work Mehdi was doing to clear
the path for TSan testing of ThinLTO, a really important step to have
reliable upstream testing of ThinLTO in all forms.
----
llvm-svn: 271800
There appears to be a strange exception thrown and crash using call_once
on a PPC build bot, and a *really* weird windows link error for
GCMetadata.obj. Still need to investigate the cause of both problems.
Original change summary:
[LPM] Reinstate r271652 to replace the CALL_ONCE_... macro in the legacy
pass manager with the new llvm::call_once facility.
llvm-svn: 271788
pass manager with the new llvm::call_once facility.
This reverts commit r271657 and re-applies r271652 with a fix to
actually work with arguments. In the original version, we just ended up
directly calling std::call_once via ADL because of the std::once_flag
argument. The llvm::call_once never worked with arguments. Now,
llvm::call_once is a variadic template that perfectly forwards
everything. As a part of this it had to move to the header and we use
a generic functor rather than an explict function pointer. It would be
nice to use std::invoke here but we don't have it yet. That means
pointer to members won't work here, but that seems a tolerable
compromise.
I've also tested this by forcing the fallback path, so hopefully it
sticks this time.
Original commit message:
----
[LPM] Replace the CALL_ONCE_... macro in the legacy pass manager with
the new llvm::call_once facility.
This facility matches the standard APIs and when the platform supports
it actually directly uses the standard provided functionality. This is
both more efficient on some platforms and much more TSan friendly.
The only remaining user of the cas_flag and home-rolled atomics is the
fallback implementation of call_once. I have a patch that removes them
entirely, but it needs a Windows patch to land first.
This alone substantially cleans up the macros for the legacy pass
manager, and should subsume some of the work Mehdi was doing to clear
the path for TSan testing of ThinLTO, a really important step to have
reliable upstream testing of ThinLTO in all forms.
llvm-svn: 271781
This is currently used by clang to lock access to modules; improve the
error message so that clang can use better output messages from locking
error issues.
rdar://problem/26529101
Differential Review: http://reviews.llvm.org/D20942
llvm-svn: 271755
Lang Hames