Following 0becc27ebf, `ppc64-pcrel-long-branch-error.s` fails in some
environments with out-of-memory errors associated with buffering the
output in-memory. Since the alternative of writing to an allocated file
is also known to cause problems, we will disable the test
unconditionally (pending a mechanism to disable the test selectively).
In this patch, a pc-rel based long branch thunk is added for the local
call protocol that caller and callee does not use TOC.
Reviewed By: sfertile, nemanjai
Differential Revision: https://reviews.llvm.org/D86706
Whilst reviewing some internal testing, I noticed a couple of holes in
coverage of mergeable sections containing symbols. This patch addresses
these holes:
1) Show that mid-piece symbols have their values updated properly when
pieces are merged.
2) Show the behaviour of symbols in mergeable pieces when --gc-sections
is enabled.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D86543
Currently, when a program header type is unknown, we dont print anything:
```
ProgramHeader {
Type: (0x60000000)
```
With this patch the output will be:
```
ProgramHeader {
Type: Unknown (0x60000000)
```
It was discussed in D85526 and consistent with what we print for
'--sections' already, e.g.:
```
Section {
Name: .sec
Type: Unknown (0x7FFFFFFF)
}
```
Differential revision: https://reviews.llvm.org/D86213
The function `__tls_get_addr` is used to get the address of an object that is Thread Local Storage.
It needs to have two relocations on it.
One relocation is for the function call itself and it is either R_PPC64_REL24 or R_PPC64_REL24_NOTOC.
The other is R_PPC64_TLSGD or R_PPC64_TLSLD for the symbol that is having its address computed.
In the early days of the transition from the ELFv1 ABI that is used for big endian PowerPC Linux distributions to the ELFv2 ABI that is used for little endian PowerPC Linux distributions, there was some ambiguity in the specification of the relocations for TLS. The GNU linker has implemented support for correct handling of calls to __tls_get_addr with a missing relocation. Unfortunately, we didn't notice that the IBM XL compiler did not handle TLS according to the updated ABI until we tried linking XL compiled libraries with LLD. As a result, there is a lot of code out there in various libraries compiled with XL that have this problem.
This patch adds a new error check in LLD that makes sure calls to `__tls_get_addr` are not missing the TLSGD/TLSLD relocation.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D85994
PR46970: for `alias = aliasee`, the alias can be used in relocation processing
and on ARM st_type does affect Thumb interworking. It is thus desirable for the
alias to get the same st_type.
Note that the st_size field should not be inherited because some tools use
st_size=0 as a heuristic to detect aliases. Retaining st_size can thwart such
heuristics and cause aliases to be preferred over the original symbols.
Differential Revision: https://reviews.llvm.org/D86263
* GNU ld places non-SHF_ALLOC sections after SHF_ALLOC sections. This has the
advantage that the file offsets of a non-SHF_ALLOC cannot be contained in
a PT_LOAD. This patch matches the behavior.
* For non-SHF_ALLOC non-orphan sections, GNU ld may assign non-zero sh_addr and
treat them similar to SHT_NOBITS (not advance location counter). This
is an alternative approach to what we have done in D85100.
By placing non-SHF_ALLOC sections at the end, we can drop special
cases in createSection and findOrphanPos added by D85100.
Different from GNU ld, we set sh_addr to 0 for non-SHF_ALLOC sections. 0
arguably is better because non-SHF_ALLOC sections don't appear in the memory
image.
ELF spec says:
> sh_addr - If the section will appear in the memory image of a process, this
> member gives the address at which the section's first byte should
> reside. Otherwise, the member contains 0.
D85100 appeared to take a detour. If we take a combined view on D85100 and this
patch, the overall complexity slightly increases (one more 3-line loop) and
compatibility with GNU ld improves.
The behavior we don't want to match is the special treatment of .symtab
.shstrtab .strtab: they can be matched in LLD but not in GNU ld.
Reviewed By: jhenderson, psmith
Differential Revision: https://reviews.llvm.org/D85867
LLD currently does not allow non-contiguous SHF_LINK_ORDER components in an
output section. This makes it infeasible to add SHF_LINK_ORDER to an existing
metadata section if backward compatibility with older object files are
concerned.
We did not allow mixed components (like GNU ld) and D77007 relaxed to allow
non-contiguous SHF_LINK_ORDER components. This patch allows arbitrary mix, with
sorting performed within an InputSectionDescription. For example,
`.rodata : {*(.rodata.foo) *(.rodata.bar)}`, has two InputSectionDescription's.
If there is at least one SHF_LINK_ORDER and at least one non-SHF_LINK_ORDER in
.rodata.foo, they are ordered within `*(.rodata.foo)`: we arbitrarily place
SHF_LINK_ORDER components before non-SHF_LINK_ORDER components (like Solaris ld).
`*(.rodata.bar)` is ordered similarly, but the two InputSectionDescription's
don't interact. It can be argued that this is more reasonable than the previous
behavior where written order was not respected.
It would be nice if the two different semantics (ordering requirement & garbage
collection) were not overloaded on one section flag, however, it is probably
difficult to obtain a generic flag at this point
(https://groups.google.com/forum/#!topic/generic-abi/hgx_m1aXqUo
"SHF_LINK_ORDER's original semantics make upgrade difficult").
(Actually, without the GC semantics, SHF_LINK_ORDER would still have the
sh_link!=0 & sh_link=0 issue. It is just that people find the GC semantics more
useful and tend to use the feature more often.)
GNU ld feature request: https://sourceware.org/bugzilla/show_bug.cgi?id=16833
Differential Revision: https://reviews.llvm.org/D84001
This patch implements the handling for the R_PPC64_PCREL_OPT relocation as well
as the GOT relocation for the associated R_PPC64_GOT_PCREL34 relocation.
On Power10 targets with PC-Relative addressing, the linker can relax
GOT-relative accesses to PC-Relative under some conditions. Since the sequence
consists of a prefixed load, followed by a non-prefixed access (load or store),
the linker needs to replace the first instruction (as the replacement
instruction will be prefixed). The compiler communicates to the linker that
this optimization is safe by placing the two aforementioned relocations on the
GOT load (of the address).
The linker then does two things:
- Convert the load from the got into a PC-Relative add to compute the address
relative to the PC
- Find the instruction referred to by the second relocation (R_PPC64_PCREL_OPT)
and replace the first with the PC-Relative version of it
It is important to synchronize the mapping from legacy memory instructions to
their PC-Relative form. Hence, this patch adds a file to be included by both
the compiler and the linker so they're always in agreement.
Differential revision: https://reviews.llvm.org/D84360
Thunk alignment is added in thie patch when using pc-rel instructions
to avoid crossing the 64 byte boundary.
Patched by: nemanjai, NeHuang
Reviewed By: sfertile, MaskRay
Differential Revision: https://reviews.llvm.org/D85973
-gdwarf-5 -fdebug-types-section may produce multiple .debug_info sections. All
except one are type units (.debug_types before DWARF v5). When constructing
.gdb_index, we should ignore these type units. We use a simple heuristic: the
compile unit does not have the SHF_GROUP flag. (This needs to be revisited if
people place compile unit .debug_info in COMDAT groups.)
This issue manifests as a data race: because an object file may have multiple
.debug_info sections, we may concurrently construct `LLDDwarfObj` for the same
file in multiple threads. The threads may access `InputSectionBase::data()`
concurrently on the same input section. `InputSectionBase::data()` does a lazy
uncompress() and rewrites the member variable `rawData`. A thread running zlib
`inflate()` (transitively called by uncompress()) on a buffer with `rawData`
tampered by another thread may fail with `uncompress failed: zlib error: Z_DATA_ERROR`.
Even if no data race occurred in an optimistic run, if there are N .debug_info,
one CU entry and its address ranges will be replicated N times. The result
.gdb_index can be much larger than a correct one.
The new test gdb-index-dwarf5-type-unit.s actually has two compile units. This
cannot be produced with regular approaches (it can be produced with -r
--unique). This is used to demonstrate that the .gdb_index construction code
only considers the last non-SHF_GROUP .debug_info
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D85579
* For .cfi_*, GCC/GNU as emits SHT_PROGBITS type .eh_frame sections.
* Since rL252300, clang emits SHT_X86_64_UNWIND type .eh_frame sections
(originated from Solaris, documented in the x86-64 psABI).
* Some assembly use `.section .eh_frame,"a",@unwind` to generate
SHT_X86_64_UNWIND .eh_frame sections.
In a non-relocatable link, input .eh_frame are combined and there is
only one SyntheticSection .eh_frame in the output section, so the
"section type mismatch" diagnostic does not fire.
In a relocatable link, there is no SyntheticSection .eh_frame. .eh_frame of
mixed types can trigger the diagnostic. This patch fixes it by adding another
special case 0x70000001 (= SHT_X86_64_UNWIND) to canMergeToProgbits().
ld.lld -r gcc.o clang.o => error: section type mismatch for .eh_frame
There was a discussion "RFC: Usefulness of SHT_X86_64_UNWIND" on the x86-64-abi
mailing list. Folks are not wild about making the psABI value 0x70000001 into
gABI, but a few think defining 0x70000001 for .eh_frame may be a good idea for a
new architecture.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D85785
For an InputSection, the `buf` argument of `InputSectionBase::relocate` points
to the content of the containing OutputSection, instead of the content of the
InputSection itself, so `outSecOff` needs to be added in its callees. This is
counter-intuitive and leads to many `- outSecOff` and `+ outSecOff`.
This patch makes `InputSection::writeTo` call `InputSectionBase::relocate` with
`outSecOff` added. relocAlloc/relocNonAlloc/relocateNonAllocForRelocatable can
thus be simplified now.
Updated test:
* non-abs-reloc.s: A minor offset bug is fixed for a diagnostic in `relocateNonAlloc`
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D85618
It turns that gnu-ifunc-plt-i386.s and gnu-ifunc-plt.s tests are broken.
Initially they were implemented in D27581 and tested that `IRELATIVE` relocations
are placed after other relocations in `.rel.plt`.
Later, we started to place `IRELATIVE` relocations to `.rela.dyn` (D65651).
Also, at some point `.plt` was renamed to `.iplt` (D71520).
Now, `gnu-ifunc*` tests mentioned do not test what they intended to test initially:
they should test that `IRELATIVE` relocations are placed after other ones in
`.rela.dyn`. Also, comments needs to be updated accordingly after changes performed.
This patch updates them.
Differential revision: https://reviews.llvm.org/D85642
Currently both sections will be placed in the same PT_LOAD and therefore
lld generates a contiguous output file containing both sections.
By using AT(0xffff0000) the .vectors is placed a separate PT_LOAD and the
resulting file is now only a few kilobytes.
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D85661
glibc/sysdeps/unix/sysv/linux/x86_64/sigaction.c libc.a(sigaction.o) has a CIE
with the augmentation string "zRS". Support 'S' to allow --icf={safe,all}.
Compatibility checks for PPC64PltCallStub and PPC64PCRelPLTStub are
added in this patch to prevent the usage of incompatible thunk/stub.
Reviewed By: sfertile, nemanjai, stefanp
Differential Revision: https://reviews.llvm.org/D85459
tl;dr See D81784 for the 'tombstone value' concept. This patch changes our behavior to be almost the same as GNU ld (except that we also use 1 for .debug_loc):
* .debug_ranges & .debug_loc: 1 (LLD<11: 0+addend; GNU ld uses 1 for .debug_ranges)
* .debug_*: 0 (LLD<11: 0+addend; GNU ld uses 0; future LLD: -1)
We make the tweaks because:
1) The new tombstone is novel and needs more time to be adopted by consumers before it's the default.
2) The old (gold) strategy had problems with zero-length functions - so rather than going back that, we're going to the GNU ld strategy which doesn't have that problem.
3) One slight tweak to (2) is to apply the .debug_ranges workaround to .debug_loc for the same reasons it applies to debug_ranges - to avoid terminating lists early.
-----
http://lists.llvm.org/pipermail/llvm-dev/2020-July/143482.html
The tombstone value -1 in .debug_line caused problems to lldb (fixed by D83957;
will be included in 11.0.0) and breakpad (fixed by
https://crrev.com/c/2321300). It may potentially affects other DWARF consumers.
For .debug_ranges & .debug_loc: 1, an argument preferring 1 (GNU ld for .debug_ranges) over -2 is that:
```
{-1, -2} <<< base address selection entry
{0, length} <<< address range
```
may create a situation where low_pc is greater than high_pc. So we use
1, the GNU ld behavior for .debug_ranges
For other .debug_* sections, there haven't been many reports. One issue is that
bloaty (src/dwarf.cc) can incorrectly count address ranges in .debug_ranges . To
reduce similar disruption, this patch changes the tombstone values to be similar to GNU ld.
This does mean another behavior change to the default trunk behavior. Sorry
about it. The default trunk behavior will be similar to release/11.x while we work on a transition plan for LLD users.
Reviewed By: dblaikie, echristo
Differential Revision: https://reviews.llvm.org/D84825
GNU ld allows sections after a non-SHF_ALLOC section to be covered by PT_LOAD
(PR37607) and assigns addresses to non-SHF_ALLOC output sections (similar to
SHF_ALLOC NOBITS sections. The location counter is not advanced).
This patch tries to fix PR37607 (remove a special case in
`Writer<ELFT>::createPhdrs`). To make the created PT_LOAD meaningful, we cannot
reset dot to 0 for a middle non-SHF_ALLOC output section. This results in
removal of two special cases in LinkerScript::assignOffsets. Non-SHF_ALLOC
non-orphan sections can have non-zero addresses like in GNU ld.
The zero address rule for non-SHF_ALLOC sections is weakened to apply to orphan
only. This results in a special case in createSection and findOrphanPos, respectively.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85100
Part of https://bugs.llvm.org/show_bug.cgi?id=41734
The semantics of SHF_LINK_ORDER have been extended to represent metadata
sections associated with some other sections (usually text).
The associated text section may be discarded (e.g. LTO) and we want the
metadata section to have sh_link=0 (D72899, D76802).
Normally the metadata section is only referenced by the associated text
section. sh_link=0 means the associated text section is discarded, and
the metadata section will be garbage collected. If there is another
section (.gc_root) referencing the metadata section, the metadata
section will be retained. It's the .gc_root consumer's job to validate
the metadata sections.
# This creates a SHF_LINK_ORDER .meta with sh_link=0
.section .meta,"awo",@progbits,0
1:
.section .meta,"awo",@progbits,foo
2:
.section .gc_root,"a",@progbits
.quad 1b
.quad 2b
Reviewed By: pcc, jhenderson
Differential Revision: https://reviews.llvm.org/D72904
GNU ld allows sections after a non-SHF_ALLOC section to be covered by PT_LOAD
(PR37607) and assigns addresses to non-SHF_ALLOC output sections (similar to
SHF_ALLOC NOBITS sections. The location counter is not advanced).
This patch tries to fix PR37607 (remove a special case in
`Writer<ELFT>::createPhdrs`). To make the created PT_LOAD meaningful, we cannot
reset dot to 0 for a middle non-SHF_ALLOC output section. This results in
removal of two special cases in LinkerScript::assignOffsets. Non-SHF_ALLOC
non-orphan sections can have non-zero addresses like in GNU ld.
The zero address rule for non-SHF_ALLOC sections is weakened to apply to orphan
only. This results in a special case in createSection and findOrphanPos, respectively.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85100
Fix PR36272 and PR46835
A .eh_frame FDE references a text section and (optionally) a LSDA (in
.gcc_except_table). Even if two text sections have identical content and
relocations (e.g. a() and b()), we cannot fold them if their LSDA are different.
```
void foo();
void a() {
try { foo(); } catch (int) { }
}
void b() {
try { foo(); } catch (float) { }
}
```
Scan .eh_frame pieces with LSDA and disallow referenced text sections to be
folded. If two .gcc_except_table have identical semantics (usually identical
content with PC-relative encoding), we will lose folding opportunity.
For ClickHouse (an exception-heavy application), this can reduce --icf=all efficiency
from 9% to 5%. There may be some percentage we can reclaim without affecting
correctness, if we analyze .eh_frame and .gcc_except_table sections.
gold 2.24 implemented a more complex fix (resolution to
https://sourceware.org/bugzilla/show_bug.cgi?id=21066) which combines the
checksum of .eh_frame CIE/FDE pieces.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D84610
--oformat=binary is rare (used in a few places in FreeBSD, see `stand/i386/mbr/Makefile` `LDFLAGS_BIN`)
The result should be identical to a normal output transformed by `objcopy -O binary`.
The current implementation ignores addresses and lays out sections by
respecting output section alignments. It can fail when an output section
address is specified, e.g. `.rodata ALIGN(16) :` (PR33651).
Fix PR33651 by respecting LMA. The code is similar to
`tools/llvm-objcop/ELF/Object.cpp` BinaryWriter::finalize after D71035 and D79229.
Unforunately for an output section without PT_LOAD, we assume its LMA is equal
to its VMA. So the result is still incorrect when an output section LMA
(`AT(...)`) is specified
Also drop `alignTo(off, config->wordsize)`. GNU ld does not round up the file size.
Differential Revision: https://reviews.llvm.org/D85086
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
This patch has explored several alternatives. The current semantics are similar to
what @dblaikie proposed.
`split-file filename output` splits the input file into multiple parts separated by
regex `^(.|//)--- filename` and write each part to the file `output/filename`
(`filename` can include path separators).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
# RUN: split-file %s %t
# RUN: llvm-mc %t/asm -o %t.o
# RUN: ld.lld -T %t/lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
# asm
...
# lds
...
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: split-file %s %t
// RUN: llc < %t/1.ll | FileCheck %s --check-prefix=CASE1
// RUN: llc < %t/2.ll | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
For example, when testing parsing errors if the recovery mechanism isn't possible,
grouping the tests in one file can more readily see test coverage/strategy.
//--- 1.ll
...
//--- 2.ll
...
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson, lattner
Differential Revision: https://reviews.llvm.org/D83834
Clang and GCC have a feature (-MD flag) to create a dependency file
in a format that build systems such as Make or Ninja can read, which
specifies all the additional inputs such .h files.
This change introduces the same functionality to lld bringing it to
feature parity with ld and gold which gained this feature recently.
See https://sourceware.org/bugzilla/show_bug.cgi?id=22843 for more
details and discussion.
The implementation corresponds to -MD -MP compiler flag where the
generated dependency file also includes phony targets which works
around the errors where the dependency is removed. This matches the
format used by ld and gold.
Fixes PR42806
Differential Revision: https://reviews.llvm.org/D82437
D68049 created options for basic block sections: -fbasic-block-sections=,
-funique-basic-block-section-names. Rename options in llc and lld (--lto-)
to be consistent. Specifically,
+ Rename basicblock-sections to basic-block-sections
+ Rename unique-bb-section-names to unique-basic-block-section-names
Differential Revision: https://reviews.llvm.org/D84462
Clang and GCC have a feature (-MD flag) to create a dependency file
in a format that build systems such as Make or Ninja can read, which
specifies all the additional inputs such .h files.
This change introduces the same functionality to lld bringing it to
feature parity with ld and gold which gained this feature recently.
See https://sourceware.org/bugzilla/show_bug.cgi?id=22843 for more
details and discussion.
The implementation corresponds to -MD -MP compiler flag where the
generated dependency file also includes phony targets which works
around the errors where the dependency is removed. This matches the
format used by ld and gold.
Fixes PR42806
Differential Revision: https://reviews.llvm.org/D82437
This patch supports the situation where caller does not have a valid TOC and
calls using the R_PPC64_REL24_NOTOC relocation and the callee is not DSO local.
In this case the call cannot be made directly since the callee may or may not
require a valid TOC pointer. As a result this situation require a PC-relative
plt stub to set up r12.
Reviewed By: sfertile, MaskRay, stefanp
Differential Revision: https://reviews.llvm.org/D83669
Hubert Tong