This patch makes LangRef be explicit about the value of padding when storing an aggregate.
It states that when an aggregate is stored into memory, padding is filled with undef.
Here is a clue that supports this change (edited to reflect the discussion from llvm-dev):
- IPSCCP ignores padding and directly stores a constant aggregate if possible. It loses the data stored in the padding. https://godbolt.org/z/xzenYs Memcpyopt ignores (the preexisting value of) padding when copying an aggregate or storing a constant: https://godbolt.org/z/hY6ndd / https://godbolt.org/z/3WMP5a
The two items below are not relevant with this patch because Clang lowers load/store of individual field of struct into load/stores of the corresponding pointer with a primitive type. Also, when copy is needed, it uses memcpy instead of load/store of an aggregate, as discussed in the llvm-dev. However, this patch is still valid (as discussed) because it is needed to explain the two optimizations above.
- According to C17, the value of padding bytes when storing values in structures or unions is unspecified.
- I updated Alive2 and it did not find any problematic transformation from LLVM unit tests and while running translation validation of a few C programs.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D86189
This is the next patch of D86842
When we check `noundef` attribute violation at callsites, we do not have to require `nonnull` in the following two cases.
1. An argument is known to be simplified to undef
2. An argument is known to be dead
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86845
Otherwise their alignment is dependent on the size of the section. If the size
is large than 16, the alignment will be 16.
16 is a bad choice for both .llvmbc and .llvmcmd because the padding between two
contributions from input sections is of a variable size.
A bitstream is actually guaranteed to be 4-byte aligned, but consumers don't
need this property.
DFS and Reverse-DFS linkage orders are used to order execution of
deinitializers and initializers respectively.
This patch replaces uses of special purpose DFS order functions in
MachOPlatform and LLJIT with uses of the new methods.
This commit adds the first from-scratch configuration files for running
the libc++ test suite without using the old configuration:
- libcxx-trunk-shared.cfg.py:
Runs the test suite against a trunk libc++ shared library.
- libcxx-trunk-static.cfg.py:
Runs the test suite against a trunk libc++ static library.
Differential Revision: https://reviews.llvm.org/D81866
Even though `noundef` IR attribute might be attached to non-void type values, AANoUndef is mistakenly identified for pointer type values only.
This patch fixes that.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86737
Replace the check for poison-producing instructions in
SimplifyWithOpReplaced() with the generic helper canCreatePoison()
that properly handles poisonous shifts and thus avoids the problem
from PR47322.
This additionally fixes a bug in IIQ.UseInstrInfo=false mode, which
previously could have caused this code to ignore poison flags.
Setting UseInstrInfo=false should reduce the possible optimizations,
not increase them.
This is not a full solution to the problem, as poison could be
introduced more indirectly. This is just a minimal, easy to backport
fix.
Differential Revision: https://reviews.llvm.org/D86834
Move bail out when optimizing for size before runtime check generation.
In that case, we do not use the result of the expansion, the expanded
instruction will be dead and cleaned up later.
By doing the check before expanding the runtime-checks, we can save a
bit of unnecessary work.
This got reverted because a dependency was reverted. It has since
been reapplied, so reapply this as well.
-----
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this more powerful than the previous implementation as
a side-effect, and this does actually seem benefitial in practice.
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
EarlyCSE has a mode to verify the invariant that hash equality equals
key equality, but EliminateDuplicatePHINodes() doesn't.
I've verified that this would have caught the stage2-stage3 mismatches
5ec2b757cc revert has fixed,
that were introduced last time in 3e69871ab5.
This patch fixes AANoUndef manifestation.
We should not manifest noundef for positions that will be changed to undef.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86835
Instead of writing to a flag and then returning based on that flag we
can also return directly. The flag name also doesn't provide additional
information, it just reflects the name of the function (isReferenced).
Handling the new min/max intrinsics is the motivation, but it
turns out that we have a bunch of other intrinsics with this
missing bit of analysis too.
The FP min/max tests show that we are intersecting FMF,
so that part should be safe too.
As noted in https://llvm.org/PR46897 , there is a commutative
property specifier for intrinsics, but no corresponding function
attribute, and so apparently no uses of that bit. We may want to
remove that next.
Follow-up patches should wire up the Instruction::isCommutative()
to this IntrinsicInst specialization. That requires updating
callers to be aware of the more general commutative property
(not just binops).
Differential Revision: https://reviews.llvm.org/D86798
The original take 1 was 6102310d81,
which taught InstSimplify to do that, which seemed better at time,
since we got EarlyCSE support for free.
However, it was proven that we can not do that there,
the simplified-to PHI would not be reachable from the original PHI,
and that is not something InstSimplify is allowed to do,
as noted in the commit ed90f15efb
that reverted it:
> It appears to cause compilation non-determinism and caused stage3 mismatches.
Then there was take 2 3e69871ab5,
which was InstCombine-specific, but it again showed stage2-stage3 differences,
and reverted in bdaa3f86a0.
This is quite alarming.
Here, let's try to change how we find existing PHI candidate:
due to the worklist order, and the way PHI nodes are inserted
(it may be inserted as the first one, or maybe not), let's look at *all*
PHI nodes in the block.
Effects on vanilla llvm test-suite + RawSpeed:
```
| statistic name | baseline | proposed | Δ | % | \|%\| |
|----------------------------------------------------|-----------|-----------|-------:|---------:|---------:|
| asm-printer.EmittedInsts | 7942329 | 7942457 | 128 | 0.00% | 0.00% |
| assembler.ObjectBytes | 254295632 | 254312480 | 16848 | 0.01% | 0.01% |
| correlated-value-propagation.NumPhis | 18412 | 18347 | -65 | -0.35% | 0.35% |
| early-cse.NumCSE | 2183283 | 2183267 | -16 | 0.00% | 0.00% |
| early-cse.NumSimplify | 550105 | 541842 | -8263 | -1.50% | 1.50% |
| instcombine.NumAggregateReconstructionsSimplified | 73 | 4506 | 4433 | 6072.60% | 6072.60% |
| instcombine.NumCombined | 3640311 | 3644419 | 4108 | 0.11% | 0.11% |
| instcombine.NumDeadInst | 1778204 | 1783205 | 5001 | 0.28% | 0.28% |
| instcombine.NumPHICSEs | 0 | 22490 | 22490 | 0.00% | 0.00% |
| instcombine.NumWorklistIterations | 2023272 | 2024400 | 1128 | 0.06% | 0.06% |
| instcount.NumCallInst | 1758395 | 1758802 | 407 | 0.02% | 0.02% |
| instcount.NumInvokeInst | 59478 | 59502 | 24 | 0.04% | 0.04% |
| instcount.NumPHIInst | 330557 | 330545 | -12 | 0.00% | 0.00% |
| instcount.TotalBlocks | 1077138 | 1077220 | 82 | 0.01% | 0.01% |
| instcount.TotalFuncs | 101442 | 101441 | -1 | 0.00% | 0.00% |
| instcount.TotalInsts | 8831946 | 8832606 | 660 | 0.01% | 0.01% |
| simplifycfg.NumHoistCommonCode | 24186 | 24187 | 1 | 0.00% | 0.00% |
| simplifycfg.NumInvokes | 4300 | 4410 | 110 | 2.56% | 2.56% |
| simplifycfg.NumSimpl | 1019813 | 999767 | -20046 | -1.97% | 1.97% |
```
So it fires 22490 times, which is less than ~24k the take 1 did,
but more than what take 2 did (22228 times)
.
It allows foldAggregateConstructionIntoAggregateReuse() to actually work
after PHI-of-extractvalue folds did their thing. Previously SimplifyCFG
would have done this PHI CSE, of all places. Additionally, allows some
more `invoke`->`call` folds to happen (+110, +2.56%).
All in all, expectedly, this catches less things overall,
but all the motivational cases are still caught, so all good.
While the original variant with doing this in InstSimplify (rightfully)
caused questions and ultimately was detected to be a culprit
of stage2-stage3 mismatch, it was expected that
InstCombine-based implementation would be fine.
But apparently it's not, as
http://lab.llvm.org:8011/builders/clang-with-thin-lto-ubuntu/builds/24095/steps/compare-compilers/logs/stdio
suggests.
Which suggests that somewhere in InstCombine there is a loop
over nondeterministically sorted container, which causes
different worklist ordering.
This reverts commit 3e69871ab5.
This ensures that you get the same output regardless if generating
code directly to an object file or if generating assembly and
assembling that.
Add implementations of the EmitARM64WinCFI*() methods in
AArch64TargetAsmStreamer, and fill in one blank in MCAsmStreamer.
Add corresponding directive handlers in AArch64AsmParser and
COFFAsmParser.
Some SEH directive names have been picked to match the prior art
for SEH assembly directives for x86_64, e.g. the spelling of
".seh_startepilogue" matching the preexisting ".seh_endprologue".
For the directives for saving registers, the exact spelling
from the arm64 documentation is picked, e.g. ".seh_save_reg" (to follow
that naming for all the other ones, e.g. ".seh_save_fregp_x"), while
the corresponding one for x86_64 is plain ".seh_savereg" without the
second underscore.
Directives in the epilogues have the same names as in prologues,
e.g. .seh_savereg, even though the registers are restored, not
saved, at that point.
Differential Revision: https://reviews.llvm.org/D86529
This can happen e.g. for code that declare .seh_proc/.seh_endproc
in assembly, or for code that use .seh_handlerdata (which triggers
the unwind info to be emitted before the end of the function).
The TextSection field must be made non-const to be able to use it
with Streamer.SwitchSection().
Differential Revision: https://reviews.llvm.org/D86528
As we've established, if it takes more than two iterations
(one to perform folding and one to ensure that no folding opportunities
remain) per function, then there are worklist management issues.
So it may be interesting to keep track of it.
The original take was 6102310d81,
which taught InstSimplify to do that, which seemed better at time,
since we got EarlyCSE support for free.
However, it was proven that we can not do that there,
the simplified-to PHI would not be reachable from the original PHI,
and that is not something InstSimplify is allowed to do,
as noted in the commit ed90f15efb
that reverted it :
> It appears to cause compilation non-determinism and caused stage3 mismatches.
However InstCombine already does many different optimizations,
so it should be a safe place to do it here.
Note that we still can't just compare incoming values ranges,
because there is no guarantee that these PHI's we'd simplify to
were already re-visited and sorted.
However coming up with a test is problematic.
Effects on vanilla llvm test-suite + RawSpeed:
```
| statistic name | baseline | proposed | Δ | % | |%| |
|----------------------------------------------------|-----------|-----------|-------:|---------:|---------:|
| instcombine.NumPHICSEs | 0 | 22228 | 22228 | 0.00% | 0.00% |
| asm-printer.EmittedInsts | 7942329 | 7942456 | 127 | 0.00% | 0.00% |
| assembler.ObjectBytes | 254295632 | 254313792 | 18160 | 0.01% | 0.01% |
| early-cse.NumCSE | 2183283 | 2183272 | -11 | 0.00% | 0.00% |
| early-cse.NumSimplify | 550105 | 541842 | -8263 | -1.50% | 1.50% |
| instcombine.NumAggregateReconstructionsSimplified | 73 | 4506 | 4433 | 6072.60% | 6072.60% |
| instcombine.NumCombined | 3640311 | 3666911 | 26600 | 0.73% | 0.73% |
| instcombine.NumDeadInst | 1778204 | 1783318 | 5114 | 0.29% | 0.29% |
| instcount.NumCallInst | 1758395 | 1758804 | 409 | 0.02% | 0.02% |
| instcount.NumInvokeInst | 59478 | 59502 | 24 | 0.04% | 0.04% |
| instcount.NumPHIInst | 330557 | 330549 | -8 | 0.00% | 0.00% |
| instcount.TotalBlocks | 1077138 | 1077221 | 83 | 0.01% | 0.01% |
| instcount.TotalFuncs | 101442 | 101441 | -1 | 0.00% | 0.00% |
| instcount.TotalInsts | 8831946 | 8832611 | 665 | 0.01% | 0.01% |
| simplifycfg.NumInvokes | 4300 | 4410 | 110 | 2.56% | 2.56% |
| simplifycfg.NumSimpl | 1019813 | 999740 | -20073 | -1.97% | 1.97% |
```
So it fires ~22k times, which is less than ~24k the take 1 did.
It allows foldAggregateConstructionIntoAggregateReuse() to actually work
after PHI-of-extractvalue folds did their thing. Previously SimplifyCFG
would have done this PHI CSE, of all places. Additionally, allows some
more `invoke`->`call` folds to happen (+110, +2.56%).
All in all, expectedly, this catches less things overall,
but all the motivational cases are still caught, so all good.
As discussed in https://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20200824/824235.html
even though it seems worthwhile doing so in InstSimplify,
we really can't do that there, because the other PHI wouldn't be
def-reachable from the original PHI.
So ignoring whether or not EarlyCSE should also know to do this,
InstCombine is the place.
As a prerequisite to doing experimental buids of pieces of FreeBSD PowerPC64 as little-endian, allow actually targeting it.
This is needed so basic platform definitions are pulled in. Without it, the compiler will only run freestanding.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D73425
A couple of AArch64 tests were failing on Solaris, both sparc and x86:
LLVM :: MC/AArch64/SVE/add-diagnostics.s
LLVM :: MC/AArch64/SVE/cpy-diagnostics.s
LLVM :: MC/AArch64/SVE/cpy.s
LLVM :: MC/AArch64/SVE/dup-diagnostics.s
LLVM :: MC/AArch64/SVE/dup.s
LLVM :: MC/AArch64/SVE/mov-diagnostics.s
LLVM :: MC/AArch64/SVE/mov.s
LLVM :: MC/AArch64/SVE/sqadd-diagnostics.s
LLVM :: MC/AArch64/SVE/sqsub-diagnostics.s
LLVM :: MC/AArch64/SVE/sub-diagnostics.s
LLVM :: MC/AArch64/SVE/subr-diagnostics.s
LLVM :: MC/AArch64/SVE/uqadd-diagnostics.s
LLVM :: MC/AArch64/SVE/uqsub-diagnostics.s
For example, reduced from `MC/AArch64/SVE/add-diagnostics.s`:
add z0.b, z0.b, #0, lsl #8
missed the expected diagnostics
$ ./bin/llvm-mc -triple=aarch64 -show-encoding -mattr=+sve add.s
add.s:1:21: error: immediate must be an integer in range [0, 255] with a shift amount of 0
add z0.b, z0.b, #0, lsl #8
^
The message is `Match_InvalidSVEAddSubImm8`, emitted in the generated
`lib/Target/AArch64/AArch64GenAsmMatcher.inc` for `MCK_SVEAddSubImm8`.
When comparing the call to `::AArch64Operand::isSVEAddSubImm<char>` on both
Linux/x86_64 and Solaris, I find
875 bool IsByte = std::is_same<int8_t, std::make_signed_t<T>>::value;
is `false` on Solaris, unlike Linux.
The problem boils down to the fact that `int8_t` is plain `char` on
Solaris: both the sparc and i386 psABIs have `char` as signed. However,
with
9887 DiagnosticPredicate DP(Operand.isSVEAddSubImm<int8_t>());
in `lib/Target/AArch64/AArch64GenAsmMatcher.inc`, `std::make_signed_t<int8_t>`
above yieds `signed char`, so `std::is_same<int8_t, signed char>` is `false`.
This can easily be fixed by also allowing for `int8_t` here and in a few
similar places.
Tested on `amd64-pc-solaris2.11`, `sparcv9-sun-solaris2.11`, and
`x86_64-pc-linux-gnu`.
Differential Revision: https://reviews.llvm.org/D85225
Rather than calling hasFnAttribute and then calling getFnAttribute
if the attribute exists, its better to just call getFnAttribute and
then check if we got a valid attribute back.
sstefan1