Some functions in Writer reports error using HasError, and some reports
their return values. This patch makes them to consistently use HasError.
llvm-svn: 265156
fixAbsoluteSymbols fixes linker-created symbol addresses. Since we don't
create such symbols for relocatable output, we don't need to call this
function.
llvm-svn: 265154
assignAddressesRelocatable function did not set addresses to sections
despite its name. What it actually did is to set file offsets to sections.
assignAddresses function assigned addresses and file offsets to sections.
So there was a confusion what they were doing, and they had duplicate code.
This patch separates file offset assignments from address assignments.
A new function, assignFileOffsets assign file offsets. assignAddresses
do not care about file offsets anymore.
llvm-svn: 265151
The extra fix is to note that it still requires copy relocations.
Original message:
Change how we handle R_MIPS_LO16.
Mips aligns PT_LOAD to 16 bits (0x10000). That means that the lower 16
bits are always the same, so we can, effectively, say that the
relocation is relative.
P.S.: Suggestions for a better name for the predicate are welcome :-)
llvm-svn: 265150
That is consistent with other symbols: _edata, _etext
and can help to avoid duplicate code.
Differential revision: http://reviews.llvm.org/D18655
llvm-svn: 265129
This fixes bootstrap of llvm-tblgen (with LTO) and PR27150.
Slightly longer explanation follows.
Emission of .init_array instead of .ctors is supported only on a
subset of the Target LLVM supports. Codegen needs to be conservative
and always emit .ctors unless instructed otherwise (based on target).
If the dynamic linker sees .init_array it completely ignores
what's inside .ctors and therefore some constructors are not called
(and this causes llvm-tblgen to crash on startup).
Teach LLD/LTO about the Codegen options so we end up always emitting
.init_array and avoid this issue.
In future, we might end up supporting mix of .ctors and .init_array
in different input files if this shows up as a real-world use case.
The way gold handles this case is mapping .ctors from input into
.init_array in output. There's also another caveat because
as far as I understand .ctors run in reverse order so when we do
the copy/mapping we need to reverse copy in the output if there's
more than one ctor. That's why I'd rather avoid this complicate logic
unless there's a real need.
An analogous reasoning holds for .dtors/.fini_array.
llvm-svn: 265085
Some targets might require creation of thunks. For example, MIPS targets
require stubs to call PIC code from non-PIC one. The patch implements
infrastructure for thunk code creation and provides support for MIPS
LA25 stubs. Any MIPS PIC code function is invoked with its address
in register $t9. So if we have a branch instruction from non-PIC code
to the PIC one we cannot make the jump directly and need to create a small
stub to save the target function address.
See page 3-38 ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
- In relocation scanning phase we ask target about thunk creation necessity
by calling `TagetInfo::needsThunk` method. The `InputSection` class
maintains list of Symbols requires thunk creation.
- Reassigning offsets performed for each input sections after relocation
scanning complete because position of each section might change due
thunk creation.
- The patch introduces new dedicated value for DefinedSynthetic symbols
DefinedSynthetic::SectionEnd. Synthetic symbol with that value always
points to the end of the corresponding output section. That allows to
escape updating synthetic symbols if output sections sizes changes after
relocation scanning due thunk creation.
- In the `InputSection::writeTo` method we write thunks after corresponding
input section. Each thunk is written by calling `TargetInfo::writeThunk` method.
- The patch supports the only type of thunk code for each target. For now,
it is enough.
Differential Revision: http://reviews.llvm.org/D17934
llvm-svn: 265059
We have to check the final value that is written.
I don't think this has any real word implications (unless something
supports unaligned instructions), but unblocks simplifying the handling
of PC relative relocations.
llvm-svn: 265009
If we make R_MIPS_LO16 a relative relocation, linker:
- never creates R_MIPS_COPY relocation for it
- attempts to create R_MIPS_REL32 dynamic relocation if R_MIPS_LO16's
target is a preemptible symbol
Differential Revision: http://reviews.llvm.org/D18607
llvm-svn: 264956
gold and bfd do not include the undefined locals in symtab.
We have no reasons to support that either.
That fixes PR27016
Differential revision: http://reviews.llvm.org/D18554
llvm-svn: 264843
The original comments were separated by new code that is irrelevant to
the comment. This patch moves the comment to the right place and update it.
llvm-svn: 264816
This simplifies a few things
* Read the value as early as possible, instead of passing a pointer to
the location.
* Print the warning for missing pair close to where we find out it is
missing.
* Don't pass the value to relocateOne.
llvm-svn: 264802
Mips aligns PT_LOAD to 16 bits (0x10000). That means that the lower 16
bits are always the same, so we can, effectively, say that the
relocation is relative.
llvm-svn: 264761
Local symbol which requires GOT entry initialized by "page" address.
This address is high 16 bits of sum of the symbol value and the relocation
addend. In the relocation scanning phase final values of symbols are unknown
so to reduce number of allocated GOT entries do the following trick. Save
all output sections referenced by GOT relocations during the relocation
scanning phase. Then later in the `GotSection::finalize` method calculate
number of "pages" required to cover all saved output sections and allocate
appropriate number of GOT entries. We assume the worst case - each 64kb
page of the output section has at least one GOT relocation against it.
Differential Revision: http://reviews.llvm.org/D18349
llvm-svn: 264730
When R_X86_64_PC32/R_X86_64_32 relocations are
used against preemptible symbol and output is position independent,
error should be generated.
Differential revision: http://reviews.llvm.org/D18190
llvm-svn: 264707
Some optimizations, e.g. SimplifyLibCalls, can replace functions with
others as part of the lowering, e.g. printf => puts.
The new symbols don't have the isUsedInRegularObj flag set so they
don't get included in the final symbol table (and dynamic symbol
table), and the dynamic linker gets confused. Include them as a fix.
Differential Revision: http://reviews.llvm.org/D18357
llvm-svn: 264688
IPO doesn't work very well across symbols referenced
by others TUs. The linker here tries to evaluate
which symbols are safe to internalize and switches
their linkage.
Differential Revision: http://reviews.llvm.org/D18415
llvm-svn: 264585
This patch simplifies the isRelRelative for AArch64 and add the missing
ones for bootstrap and test-suite. It also adds more testing for
shared object creation.
llvm-svn: 264322
Ensure we keep the symbol we need to before it reaches
the Writer (and hit an assertion), changing its linkage
from linkonce_odr to weak. For a more detailed description
of the problem, see PR19901 where a similar problem was
fixed for the gold plugin. Thanks to Rafael for providing
a testcase.
llvm-svn: 264111
The code for LTO has been growing, so now is probably a good time to
move it to its own file. SymbolTable.cpp is for symbol table, and
because compiling bitcode files are semantically not a part of
symbol table, this is I think a good thing to do.
http://reviews.llvm.org/D18370
llvm-svn: 264091
When a tls access is optimized, a group of relocations is converted at a
time.
We were already skipping relocations that were optimized out in
relocate, but not in scanRelocs.
This is a small optimization. I got here while working on a patch that
will always keep scanRelocs and relocate in sync.
llvm-svn: 264048
R_X86_64_GOTPCRELX and R_X86_64_REX_GOTPCRELX relocations were added in latest ABI:
https://github.com/hjl-tools/x86-psABI/wiki/x86-64-psABI-r249.pdf
They should be generated instead of R_X86_64_GOTPCREL for cases
when relaxation is possible. Currently this patch just process them in the
same way like R_X86_64_GOTPCREL. That should work for now
and we can implement relaxations later.
There is no testcases provided as I think there is no way to generate
such relocations using llvm-mc atm.
Differential revision: http://reviews.llvm.org/D18301
llvm-svn: 264043
Now local symbols have SymbolBody so we can handle all kind of symbols
in the GotSection::addEntry method. The patch moves the code from
addMipsLocalEntry to addEntry. NFC.
Differential Revision: http://reviews.llvm.org/D18302
llvm-svn: 264032
Just ignore the -rpath-link command line
option in the same way like gold do.
Behavior of lld/gold differs from gnu ld here.
GNU ld tries to resolve undefined symbols in all
shared object files at link time.
Differential revision: http://reviews.llvm.org/D18269
llvm-svn: 263876
This is required to get 'clang -flto' to work transparently
with lld. Please refer to the short comment in the code
for a more detailed explanation.
llvm-svn: 263862
-pie
--pic-executable
Create a position independent executable. This is currently only
supported on ELF platforms. Position independent executables are
similar to shared libraries in that they are relocated by the
dynamic linker to the virtual address the OS chooses for them
(which can vary between invocations). Like normal dynamically
linked executables they can be executed and symbols defined in the
executable cannot be overridden by shared libraries.
Differential revision: http://reviews.llvm.org/D18183
llvm-svn: 263693
For now just treat such sections as non-mergeable.
Resubmit r263660 with test fix.
Differential Revision: http://reviews.llvm.org/D18225
llvm-svn: 263664
-warn-common
Warn when a common symbol is combined with another common symbol
or with a symbol definition. Unix linkers allow this somewhat
sloppy practice, but linkers on some other operating systems do
not. This option allows you to find potential problems from
combining global symbols.
Differential revision: http://reviews.llvm.org/D17998
llvm-svn: 263413
We want to make SymbolBody the central place to query symbol information.
This patch also renames canBePreempted to isPreemptible because I feel that
the latter is slightly better (the former is three words and the latter
is two words.)
llvm-svn: 263386
The patch does not reduce the size of the code but makes
InputSectionBase::relocate cleaner a bit.
Differential Revision: http://reviews.llvm.org/D18119
llvm-svn: 263381
error returned true if there was an error. This allows us to replace
the code like this
if (EC) {
error(EC, "something failed");
return;
}
with
if (error(EC, "something failed"))
return;
I thought that that was a good idea, but it turned out that we only
have two places to use this pattern. So this patch removes that feature.
llvm-svn: 263362
At least Linux has the kernel configuration to include the first page
of the executable into core files. We want build ID section to be
included in core files to identify them.
Here is the link to the description about the kernel configuration.
097f70b3c4/fs/Kconfig.binfmt (L46)
llvm-svn: 263351
which was reverted because included
unrelative changes by mistake.
Original commit message:
[ELF] - Change all messages to lowercase to be consistent.
That is directly opposite to http://reviews.llvm.org/D18045,
which was reverted.
This patch changes all messages to start from lowercase letter if
they were not before.
That is done to be consistent with clang.
Differential revision: http://reviews.llvm.org/D18085
llvm-svn: 263337
This patch implements --build-id. After the linker creates an output file
in the memory buffer, it computes the FNV1 hash of the resulting file
and set the hash to the .note section as a build-id.
GNU ld and gold have the same feature, but their default choice of the
hash function is different. Their default is SHA1.
We made a deliberate choice to not use a secure hash function for the
sake of performance. Computing a secure hash is slow -- for example,
MD5 throughput is usually 400 MB/s or so. SHA1 is slower than that.
As a result, if you pass --build-id to gold, then the linker becomes about
10% slower than that without the option. We observed a similar degradation
in an experimental implementation of build-id for LLD. On the other hand,
we observed only 1-2% performance degradation with the FNV hash.
Since build-id is not for digital certificate or anything, we think that
a very small probability of collision is acceptable.
We considered using other signals such as using input file timestamps as
inputs to a secure hash function. But such signals would have an issue
with build reproducibility (if you build a binary from the same source
tree using the same toolchain, the build id should become the same.)
GNU linkers accepts --build-id=<style> option where style is one of
"MD5", "SHA1", or an arbitrary hex string. That option is out of scope
of this patch.
http://reviews.llvm.org/D18091
llvm-svn: 263292
That is directly opposite to http://reviews.llvm.org/D18045,
which was reverted.
This patch changes all messages to start from lowercase letter if
they were not before.
That is done to be consistent with clang.
Differential revision: http://reviews.llvm.org/D18085
llvm-svn: 263252
In lld we usually avoid hash lookups. In addition to that, IR names are
not fully mangled, so it is best to avoid using them whenever possible.
llvm-svn: 263248
It was discussed to make all messages be
lowercase to be consistent with clang.
(also reverts the r263128 which fixed
build bot fail after r263125)
Original commit message:
[ELF] - Consistent spelling for error/warning messages
Previously error and warnings were not consistent in lld.
Some of them started from lowercase letter, others from
uppercase. Also there was one or two which had a dot at the end.
This patch changes all messages to start from uppercase letter if
they were not before.
Differential revision: http://reviews.llvm.org/D18045
llvm-svn: 263240
It is really odd that Mips differentiates symbols that are born local
and those that become local because of hidden visibility. I don't know
enough mips to known if this is a bug or not.
llvm-svn: 263228
This patch adds --thread option and use parallel_for_each to write
sections in regular OutputSections.
This is the first patch to use more than one threads.
Note that --thread is off by default because it is experimental.
At this moment I still want to focus on single thread performance
because multi-threading is not a magic wand to fix performance
problems after all. It is generally very hard to make a slow program
faster by threads. Therefore, I want to make the linker as efficient
as possible first and then look for opportunity to make it even faster
using more than one core.
Here are some numbers to link programs with and without --threads
and using GNU gold. Numbers are in seconds.
Clang
w/o --threads 0.697
w --threads 0.528
gold 1.643
Scylla
w/o --threads 5.032
w --threads 4.935
gold 6.791
GNU gold
w/o --threads 0.550
w --threads 0.551
gold 0.737
I limited the number of cores these processes can use to 4 using
perf command, so although my machine has 20 physical cores, the
performance gain I observed should be reproducible with a machine
which is not as beefy as mine.
llvm-svn: 263190
Summary:
More generally, appending linkage is a special case that we don't want
to create a SymbolBody for.
Reviewers: rafael, ruiu
Subscribers: Bigcheese, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18012
llvm-svn: 263179
We can argue about a maximum alignment of a group of symbols,
but for each symbol, there is only one alignment.
So it is a bit weird that each symbol has a "maximum alignment".
llvm-svn: 263151
R_X86_64_DTPOFF64 was not handled properly.
Next sample app was impossible to link before this patch:
~/pg/release/bin/clang -target x86_64-pc-linux testthread.cpp -c -g
~/pg/d+a/bin/ld.lld testthread.o
"Unknown TLS optimization" (value was 17)
__thread int x = 0;
void _start() {
}
It works fine now.
Differential revision: http://reviews.llvm.org/D18039
llvm-svn: 263150
It looks a bit wierd that we have to initialize symbols for all ELFT
types when we use only one ELFT for link. We can only init those
that we need. Patch fixes it.
Differential revision: http://reviews.llvm.org/D18047
llvm-svn: 263133
Previously error and warnings were not consistent in lld.
Some of them started from lowercase letter, others from
uppercase. Also there was one or two which had a dot at the end.
This patch changes all messages to start from uppercase letter if
they were not before.
Differential revision: http://reviews.llvm.org/D18045
llvm-svn: 263125
Summary:
They are needed for inline asm during LTO.
In particular we hit the report_fatal_error on
llvm/lib/CodeGen/AsmPrinter/AsmPrinterInlineAsm.cpp:138
LLVM ERROR: Inline asm not supported by this streamer because we don't have an asm parser for this target
Reviewers: ruiu, rafael
Subscribers: Bigcheese, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18027
llvm-svn: 263094
Summary:
This implements another part of -save-temps.
After this, the only remaining part is dumping the optimized bitcode. But
currently LLD's LTO doesn't have a non-intrusive place to put this.
Eventually we probably will and it will make sense to add it then.
Reviewers: ruiu, rafael
Subscribers: joker.eph, Bigcheese, llvm-commits
Differential Revision: http://reviews.llvm.org/D18009
llvm-svn: 263070
Summary:
This is useful for debugging issues with LTO.
The option follows the analogous option in ld64 and the gold plugin (per
Rafael's suggestion).
For starters, this only dumps the combined bitcode file.
In a future patch I will add dumping for the .o file.
The naming of the output follows ld64's convention which is slightly more
consistent IMO (consistent `.lto.<extension>` for all the files).
Reviewers: rafael, ruiu
Subscribers: joker.eph, Bigcheese, llvm-commits
Differential Revision: http://reviews.llvm.org/D18006
llvm-svn: 263055
Summary:
At the very least we hit
Assertion failed: (((Flags & RF_HaveUnmaterializedMetadata) || Node->isResolved()) && "Unexpected unresolved node"), function MapMetadataImpl, file /Users/Sean/pg/llvm/lib/Transforms/Utils/ValueMapper.cpp, line 375.
on the included test case.
We currently do things like parse the module twice to keep the
implementation minimal. I think it makes sense to add start with eager
loading for similar reasons.
Reviewers: rafael
Subscribers: ruiu, Bigcheese, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D17982
llvm-svn: 263045
Each object file compiled in split stack mode will have an empty
section with a special name: .note.GNU-split-stack
We don't support this in linker now, so patch just adds an error out for that.
Differential revision: http://reviews.llvm.org/D17918
llvm-svn: 263039
Summary:
Is there any other code needed for correctly handling appending linkage?
Do we need to do something more with @llvm.global_ctors in
SymbolTable.cpp:addBitcodeFile; otherwise the combined bitcode module
won't have all the global ctors.
Reviewers: rafael
Subscribers: Bigcheese, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D17975
llvm-svn: 262992
Summary:
This causes the issue in PR26872 to go away now that we aren't creating
symbols for the string literals, but that may just be concealing a
deeper problem, so best to keep that PR open.
Reviewers: rafael
Subscribers: Bigcheese, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D17971
llvm-svn: 262968
It was a badly specified hack for when a tls relocation should be
propagated to the dynamic relocation table.
This replaces it with a not as bad hack of saying that a local dynamic
tls relocation is never preempted.
I will try to remove even that second hack in the next patch.
llvm-svn: 262955
It was causing errors like
/lib/libc.so.6 is incompatible with elf_x86_64
when linking on Fedora.
Every system has different default paths. It seems better to just trust
the driver to pass the correct -L options.
This reverts commit 262910.
llvm-svn: 262941
The variables corresponding to command line options are named mechanically.
Because the option for the variable is -noinhibit-exec and not -no-inhibit-exec,
it should be name this way.
llvm-svn: 262911
Get rid of few accessors in that class, and replace
them with direct fields access.
Differential revision: http://reviews.llvm.org/D17879
llvm-svn: 262796
Patch changes the return type of Target::relaxTls
to size_t from unsigned. That is consistent with
its use from other code.
Change was reviewed http://reviews.llvm.org/D17882
and asked to commit separately from that patch above.
llvm-svn: 262794
Patch changes all relocations types to be uint32_t and also
fixes some dependent inconsistency in callers code.
Differential revision: http://reviews.llvm.org/D17882
llvm-svn: 262793
This has a few advantages:
* If lld selected a non bitcode symbol, be the bitcode GV is not merged
* lib/Linker is not redoing symbol resolution.
llvm-svn: 262773
The rules for when we can relax tls relocations are target independent.
The only things that are target dependent are the relocation values.
llvm-svn: 262748
SymbolBody constructor and friends take isFunc and isTLS boolean arguments.
ELF symbols have already a type so than be easily passed as argument.
If we want to support another type, this scheme is not good enough, that is,
the current code logic would require passing another `bool isObject` around.
Up to two argument, this stretching exercise was a little bit goofy but
still acceptable, but with more types to support, is just too much, IMHO.
Change the code so that the type is passed instead.
Differential Revision: http://reviews.llvm.org/D17871
llvm-svn: 262684
When generating relocatable output SHT_NOBITS sections
were still occupy the file space.
Differential revision: http://reviews.llvm.org/D17857
llvm-svn: 262650
The hack of using a plt address as the address of an undefined function
only works in executables. Don't try it with shared libraries.
llvm-svn: 262642
There was a known limitation for -r option:
relocations against local symbols were not supported.
For example rel[a].eh_frame sections contained relocations against sections
and that was not supported for -r before. Patch fixes that.
Differential review: http://reviews.llvm.org/D17813
llvm-svn: 262590
Now that DarwinLdDriver is the only derived class of Driver.
This patch merges them and actually removed the class because
they can now just be non-member functions. This change simplifies
a common header, Driver.h.
http://reviews.llvm.org/D17788
llvm-svn: 262502
The patch fixes two related problems:
- If CIE augmentation string has 'L' token the CIE contains a byte
defines LSDA encoding. We should skip this byte in `getFdeEncoding`
routine. Before this fix we do not skip it and if the next token
is 'R' treat this byte as FDE encoding.
- FDE encoding format has separate flags e.g. DW_EH_PE_pcrel for
definition of relative pointers. We should add .eh_frame address to
the PC value iif the DW_EH_PE_pcrel is specified.
http://www.airs.com/blog/archives/460
There is one more not fixed problem in this code. If PC value is encoded
using signed relative format e.g. DW_EH_PE_sdata4 | DW_EH_PE_pcrel we
should sign extend result of read32 to perform calculation correctly.
I am going to fix that in a separate patch.
Differential Revision: http://reviews.llvm.org/D17733
llvm-svn: 262461
As was suggested in mails, this patch implements edata/etext
symbols in a more direct way.
It iterates through PT_LOADs.
Result seems to be the same and equal to gold output.
Differential revision: http://reviews.llvm.org/D17755
llvm-svn: 262369
__start_/__end_ <section-name> symbols and other specials like:
preinit_array_start/end
init_array_start/end
fini_array_start/end
should not be created by linker when creating relocatable files.
Differential revision: http://reviews.llvm.org/D17774
llvm-svn: 262366
UniversalDriver was used as a dispatcher to each platform-specific driver.
It had its own Options.td file. It was not just too much to parse only a
few options (we only want to parse -core, -flavor or argv[0]),
but also interpreted arguments too early. For example, if you invoke lld as
"lld -flavor gnu ... -help", then you'd get the UniversalDriver's help
message instead of GnuDriver's. This patch eliminates the use of Options
from the dispatcher.
http://reviews.llvm.org/D17686
llvm-svn: 262190
Regarding the comment, it is out of context because it describes
what it does not do there. It got too long because it was originally
two different comments that were simply merged together.
The semantics is described in fixAbsoluteSymbols, so we don't need it.
llvm-svn: 262031
BSD linker scripts contain special cases to add NOP
padding to code sections. Syntax is next:
.init:
{
KEEP (*(.init))
} =0x90909090
(0x90 is NOP)
This patch implements that functionality.
llvm-svn: 262020
https://docs.oracle.com/cd/E53394_01/html/E54766/u-etext-3c.html
It is said that:
_etext - The address of _etext is the first
location after the last read-only loadable segment.
_edata - The address of _edata is the first
location after the last read-write loadable segment.
_end - If the address of _edata is greater than the address
of _etext, the address of _end is same as the address of _edata.
In real life _end and _edata has different values for that case.
Both gold/bfd set _edata to the end of the last non SHT_NOBITS section.
This patch do the same for consistency.
It should fix the https://llvm.org/bugs/show_bug.cgi?id=26729.
Differential revision: http://reviews.llvm.org/D17601
llvm-svn: 262019
For shared libraries we allow any weak undefined symbol to eventually be
resolved, even if we never see a definition in another .so. This matches
the behavior when handling other undefined symbols in a shared library.
For executables, we require seeing a definition in a .so or resolve it
to zero. This is also similar to how non weak symbols are handled.
llvm-svn: 262017
When this code was first added it was compensating for the code deciding
to create plt entries for directly referenced functions being too aggressive.
That has since been fixed, so we don't need this anymore.
llvm-svn: 261933
R_MIPS_GOT16 relocation against local symbol requires index of a local
GOT entry which contains page address corresponds to sum of the symbol
address and addend. The addend in that case is calculated using addends
from the R_MIPS_GOT16 and paired R_MIPS_LO16 relocations.
Differential Revision: http://reviews.llvm.org/D17610
llvm-svn: 261930
This patch implements the same algorithm as LLD/COFF's ICF. I'm
not going to repeat the same description about how it works, so you
want to read the comment in ICF.cpp in this patch if you want to know
the details. This algorithm should be more powerful than the ICF
algorithm implemented in GNU gold. It can even merge mutually-recursive
functions (which is harder than one might think).
ICF is a fairly effective size optimization. Here are some examples.
LLD: 37.14 MB -> 35.80 MB (-3.6%)
Clang: 59.41 MB -> 57.80 MB (-2.7%)
The lacking feature is "safe" version of ICF. This merges all
identical sections. That is not compatible with a C/C++ language
requirement that two distinct functions must have distinct addresses.
But as long as your program do not rely on the pointer equality
(which is in many cases true), your program should work with the
feature. LLD works fine for example.
GNU gold implements so-called "safe ICF" that identifies functions
that are safe to merge by heuristics -- for example, gold thinks
that constructors are safe to merge because there is no way to
take an address of a constructor in C++. We have a different idea
which David Majnemer suggested that we add NOPs at beginning of
merged functions so that two or more pointers can have distinct
values. We can do whichever we want, but this patch does not
include neither.
http://reviews.llvm.org/D17529
llvm-svn: 261912
-r, -relocatable - Generate relocatable output
Currently does not have support for files containing
relocation sections with entries that refer to local
symbols (like rel[a].eh_frame which refer to sections
and not to symbols)
Differential revision: http://reviews.llvm.org/D14382
llvm-svn: 261838
This commit does two related thing. At first, it enumerates supported
absolute MIPS relocations in the `MipsTargetInfo<ELFT>::isRelRelative`
method. In that case the code is shorter and the case switch does not
tend to grow. At second, it prevents R_MIPS_COPY and PLT creation for
relative relocations. For almost all relative MIPS relocations like
R_MIPS_PC19_S2, R_MIPS_PCHI16 etc it does not have a sence. The only
exception is R_MIPS_PC32. GNU linker creates a copy relocation or PLT
entry for it. But I could not find any real test case uses R_MIPS_PC32
with DSO defined symbol as a target. So for now I prefer to skip this
case to simplify the LLD code.
llvm-svn: 261822
"Discarded" section is a marker for discarded sections, and we do not
use the instance except for checking its identity. In that sense, it
is just another type of a "null" pointer for InputSectionBase. So,
it doesn't have to be a real instance of InputSectionBase class.
In this patch, we no longer instantiate Discarded section but instead
use -1 as a pointer value. This eliminates a global variable which
needed initialization at startup.
llvm-svn: 261761
This is a preparation for ICF. If we merge two sections, we want to
align the merged section at the largest alignment requirement.
That means we want to update the alignment value, which was
impossible before this patch because Header is a const value.
llvm-svn: 261712
There is nothing aarch64 specific in here. If a symbol can be preempted,
we need to copy the full relocation to the dynamic linker.
If a symbol cannot be preempted, we can make the dynamic linker life
easier and produce a relative relocation.
This is directly equivalent to R_X86_64_64 to R_x86_64_RELATIVE
conversion.
llvm-svn: 261678
The .tbss section is in the middle of a PT_LOAD. Whatever treatment we
give to its address we must also give to the offset.
We were ignoring it for address computations, but not for offset.
Fixes pr26712.
llvm-svn: 261667
This patch moves BitcodeFile instantiation into createObjectFile.
Previously, we handle bitcode files outside that function and did
not handle for --whole-archive.
http://reviews.llvm.org/D17527
llvm-svn: 261663
This patch fixes the R_AARCH64_ABS64 relocation when used in shared mode,
where it requires a dynamic R_AARCH64_RELATIVE relocation. To correct set
the addend on the dynamic relocation (since it will be used by the dynamic
linker), a new TargetInfo specific hook was created (getDynRelativeAddend)
to get the correct addend based on relocation type.
The patch fixes the issues when creating shared library code against
{init,fini}_array, where it issues R_AARCH64_ABS64 relocation against
local symbols.
llvm-svn: 261651
When link-time garbage collection is in use (-gc-sections), it is
often useful to mark sections that should not be eliminated.
This is accomplished by surrounding an input section's wildcard
entry with KEEP(). Patch implements that command.
Differential revision: http://reviews.llvm.org/D17242
llvm-svn: 261616
A weak undefined should not fetch archive members, so we have to keep
the Lazy symbol.
That means the lazy symbol has to encode information about the original
weak undef.
Fixes pr25762.
llvm-svn: 261591
This reduces the .rodata of scyladb from 4501932 to 4334639 bytes (1.038
times smaller).
I don't think it is critical to support tail merging, just exact
duplicates, but given the code organization it was actually a bit easier
to support both.
llvm-svn: 261327
* Else-ifs in ScriptParser::run() replaced with std::function + map
* Reordered members of ScriptParser
Differential revision: http://reviews.llvm.org/D17256
llvm-svn: 261317
Previously, we added garbage-collected symbols to the symbol table
and filter them out when we were writing symbols to the file. In
this patch, garbage-collected symbols are filtered out from beginning.
llvm-svn: 261064
Each rule in SECTIONS commands is something like ".foo *(.baz.*)",
which instructs the linker to collect all sections whose name matches
".baz.*" from all files and put them into .foo section.
Previously, we didn't recognize the wildcard character. This patch
adds that feature.
Performance impact is a bit concerning because a linker script can
contain hundreds of SECTIONS rules, and doing pattern matching against
each rule would be too expensive. We could merge all patterns into
single DFA so that it takes O(n) to the input size. However, it is
probably too much at this moment -- we don't know whether the
performance of pattern matching matters or not. So I chose to
implement the simplest algorithm in this patch. I hope this simple
pattern matcher is sufficient.
llvm-svn: 260745
This patch adds some TLS relocations and relaxations for AArch64.
Some Global-Dynamic relocation are handled by optimizing them to
Local-Exec (Initial-Exec is not yet supported). They are:
- R_AARCH64_TLSDESC_ADR_PAGE21
- R_AARCH64_TLSDESC_LD64_LO12_NC
- R_AARCH64_TLSDESC_ADD_LO12_NC
- R_AARCH64_TLSDESC_CALL
Also some Init-Exec is optimized to Local-Exec if possible. They are:
- R_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
- R_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
Finally some Local-Exec relocation are handled in relocateOne:
- R_AARCH64_TLSLE_ADD_TPREL_HI12
- R_AARCH64_TLSLE_ADD_TPREL_LO12_NC
This work is mainly for compiler bootstrap, where static binaries is
showing good progress (although shared object still lacking support
from both TLS aarch64 backend and some other issues).
llvm-svn: 260677
Previously, if both A and B are ".ctors", both compCtors(A, B) and
compCtors(B, A) are true, which is a violation of the strict weak
ordering because such function is not antisymmetric.
llvm-svn: 260633
Previously, Target held a value until a new value is assigned to the
variable. That was a benign leak -- that was not an unbounded leak
and didn't grab any resources except a small amount of memory. But
it is better to fix than leaving as is.
llvm-svn: 260592
Previously, we had code for linker scripts in Writer. This patch
separates that as LinkerScript class. The class provides a few
functions to query linker scripts and is also a container of some
linker-script-specific information.
Hopefully, Writer will only implement the default behavior and let
the new class handle gotchas regarding linker scripts.
llvm-svn: 260591
R_X86_64_TPOFF64 is a dynamic relocation,
it should not appear in static relocation processing.
Patch fixes it.
Differential revision: http://reviews.llvm.org/D16880
llvm-svn: 260508
They don't count for the memory or file size, so this is mostly just a
simplification.
The only noticeable difference should be fewer empty program headers.
llvm-svn: 260465
Global constructors and destructors are guaranteed to be called
in the order as they appear in a translation unit. So we don't want
to mess up the order if they have the same priority.
llvm-svn: 260463
IMHO this makes the code easier to read and should help with linker
scripts.
This is strongly based on D16575. The main differences are:
We record a range of sections, not every section in a program header.
scanHeaders takes case of deciding what goes in every program header,
including PT_GNU_RELRO
We create dummy sections for the start of the file
With this, program header creation has 3 isolated stages:
Map sections to program headers.
Assign addresses to *sections*
Looking at sections find the address and size of each program header.
Thanks to George Rimar for the initial version.
llvm-svn: 260453
The patch adds lazy relocation support for MIPS and R_MIPS_26 relocation
handing.
R_MIPS_26 relocation might require PLT entry creation. In that case it
is fully supported by the patch. But if the relocation target is a local
symbol we need to use a different expression to calculate the relocation
result. This case is not implemented yet because there is no method to
get know the kind of relocation target in the `relocateOne` routine.
Differential Revision: http://reviews.llvm.org/D16982
llvm-svn: 260424
MIPS 32-bit ABI uses REL relocation record format. We read addends from
relocation destinations right in the MipsTargetInfo::relocateOne
function.
llvm-svn: 260364
This basically reverts commit r260073 because it is found that
augmentation strings don't always start with "zR". It is reported
as https://llvm.org/bugs/show_bug.cgi?id=26541.
llvm-svn: 260294
This is the function equivalent of a copy relocation.
Since functions are expected to change sizes, we cannot use copy
relocations. In situations where one would be needed, what is done
instead is:
* Create a plt entry
* Output an undefined symbol whose addr is the plt entry.
The dynamic linker makes sure any shared library uses the plt entry as
the function address.
llvm-svn: 260224
I found that the handling of 'L' character in an augmentation string is
wrong because 'L' means that the next byte is the length field. I could
have fixed that by just skipping the next byte, but I decided to take a
different approach.
Teaching the linker about all the types of CIE internal records just to
skip them is silly. And the code doing that is not actually executed now
(that's why the bug did not cause any issue.) It is because the 'R' field,
which we want to read, is always at beginning of the CIE. So I reduced
the code dramatically by assuming that that's always the case. I want to
see how it works in the wild. If it doesn't work, we can roll this back
(with a fix for 'L').
http://reviews.llvm.org/D16939
llvm-svn: 260073
I removed "CIE/FIE size is too large" error because that was not
checking for correct error conditions. [UINT_MAX - 4, UINT_MAX) is
a correct range as a size of a CIE/FDE record. It's just that the
size cannot be larger than the section size.
llvm-svn: 259951
Previously, it was easy to leave some Out<ELFT> fields uninitialized
because assignments to the fields are mixed with output section
instantiations. In this patch, I separate initializations from assignments
to improve readability.
http://reviews.llvm.org/D16864
llvm-svn: 259899
The variable was marking various cases where a symbol must be included
in the dynamic symbol table. Being used by a dynamic relocation was only
one of them.
llvm-svn: 259889
The previous names contained "Local" and "Current", but what we
are handling is always local and current, so they were redundant.
TlsIndex comes from "tls_index" struct that Ulrich Drepper is using
in this document to describe this data structure in GOT.
llvm-svn: 259852
Summary:
LLVM3.3 (and earlier) would fail to include a relocation section in
the group that the section it was relocating is in. Object files
affected by this issue have been encountered in the wild when using LLD.
This would result in a siutation like:
Section {
Index: 5
Name: .text._Z3fooIiEvv (6)
Type: SHT_PROGBITS (0x1)
Flags [ (0x206)
SHF_ALLOC (0x2)
SHF_EXECINSTR (0x4)
SHF_GROUP (0x200)
]
Address: 0x0
Offset: 0x48
Size: 5
Link: 0
Info: 0
AddressAlignment: 1
EntrySize: 0
}
Section {
Index: 6
Name: .rela.text._Z3fooIiEvv (1)
Type: SHT_RELA (0x4)
Flags [ (0x0)
]
Address: 0x0
Offset: 0x3F0
Size: 24
Link: 8
Info: 5
AddressAlignment: 8
EntrySize: 24
}
In LLD, during symbol resolution, we discard the section containing the
weak symbol, but this amounts to replacing it with
InputSection<ELFT>::Discarded.
When we later saw the corresponding relocation section, we would then
end up pusing onto InputSection<ELFT>::Discarded.RelocSections, which is
bogus.
Reviewers: ruiu, rafael
Subscribers: llvm-commits, Bigcheese
Differential Revision: http://reviews.llvm.org/D16898
llvm-svn: 259831
Another case where we currently have almost duplicated code is the
creation of dynamic relocations. First to decide if we need one, then to
decide what to write.
This patch fixes it by passing more information from the relocation scan
to the section writing code. This is the same idea used for r258723.
I actually think it should be possible to simplify this further by
reordering things a bit in the writer. For example, we should be able to
represent almost every position in the file with an OutputSeciton and
offset. When writing it out we then just need to add the offset to the
OutputSection VA.
llvm-svn: 259829
Symbol does not need an entry i the 'global' part of GOT if it cannot be
preempted. So canBePreempted fully satisfies us at least for now.
llvm-svn: 259779
If relocation against symbol requires GOT entry creation and this symbol
is defined in DSO, the GOT entry should be created in the 'global' part
of the GOT even if we link executable file. Also we do not need to create
a dynamic symbol table entry for global symbol corresponding to the
local GOT entry.
llvm-svn: 259778
It can fail to open an output file for various reasons, including
lack of permission, too long filename, or the output file is not
a mmap'able file.
llvm-svn: 259596
This patch adds "Error" field to LinkerScript class. That field
is false by default, and set to true if there is a syntax error
in an input file. The linker script parser is a recursive-descedent
parser. Each function returns if Error is true -- so that
eventually the whole parser returns to a caller.
http://reviews.llvm.org/D16667
llvm-svn: 259557
All MemoryBuffers for archive files are guaranteed to exist as long
as their children are used in the linker. So we don't need to copy
strings here. Thanks to Sean Silva for pointing this out.
llvm-svn: 259554
-Bsymbolic-functions:
When creating a shared library, bind references to global
function symbols to the definition within the shared library, if any.
This patch also fixed behavior of already existent -Bsymbolic:
previously PLT entries were created even if -Bsymbolic was specified.
Differential revision: http://reviews.llvm.org/D16411
llvm-svn: 259481
Some dynamic table tags like RELSZ and PLTRELSZ depens on result of
finalizing corresponding relocation sections. Therefore we have to
finalize .dynamic section at the end.
Differential Revision: http://reviews.llvm.org/D16799
llvm-svn: 259478
If object files are drawn from archive files, the error message should
be something like "conflict symbols in foo.a(bar.o) and baz.o" instead
of "conflict symbols in bar.o and baz.o". This patch implements that.
llvm-svn: 259475
Instead of leave unused fields as is, set them to nullptr.
Currnetly this is NFC, but if you call writeResults more than
once, you should be able to see the difference.
llvm-svn: 259444
Previously, the methods to get symbol addresses were somewhat scattered
in many places. You can use getEntryAddr returns the address of the symbol,
but if you want to get the GOT address for the symbol, you needed to call
Out<ELFT>::Got->getEntryAddr(Sym). This change adds new functions, getVA,
getGotVA, getGotPltVA, and getPltVA to SymbolBody, so that you can use
SymbolBody as the central place to ask about symbols.
http://reviews.llvm.org/D16710
llvm-svn: 259404
This avoids the need to have reserve and addString in sync.
We avoid hashing the global symbols again. This means that we don't
merge a global symbol that has the same name as some other string, but
that doesn't seem very common. The string table size is the same in
clang an scylladb with or without hashing global symbols again.
llvm-svn: 259136
This function is a predicate that a given relocation can be relaxed.
The previous name implied that it returns true if a given relocation
has already been optimized away.
llvm-svn: 259128
In many situations, we don't want to exit at the first error even in the
process model. For example, it is better to report all undefined symbols
rather than reporting the first one that the linker picked up randomly.
In order to handle such errors, we don't need to wrap everything with
ErrorOr (thanks for David Blaikie for pointing this out!) Instead, we
can set a flag to record the fact that we found an error and keep it
going until it reaches a reasonable checkpoint.
This idea should be applicable to other places. For example, we can
ignore broken relocations and check for errors after visiting all relocs.
In this patch, I rename error to fatal, and introduce another version of
error which doesn't call exit. That function instead sets HasError to true.
Once HasError becomes true, it stays true, so that we know that there
was an error if it is true.
I think introducing a non-noreturn error reporting function is by itself
a good idea, and it looks to me that this also provides a gradual path
towards lld-as-a-library (or at least embed-lld-to-your-program) without
sacrificing code readability with lots of ErrorOr's.
http://reviews.llvm.org/D16641
llvm-svn: 259069
This does not solve the problem that we call isGnuIFunc function
both from RelocationSection and from the Writer::scanRelocs, but
this at least should improve readability. I'm taking an incremental
approach to reduce complexity.
llvm-svn: 258753
There are a few cases where we have almost duplicated code.
This patches fixes the simplest: the finalize and write of dynamic
section. Right now they have to have exactly the same structure to
decide if a DT_* entry is needed and then to actually write it.
We cannot just write it to a std::vector in the first pass since
addresses have not been computed yet.
llvm-svn: 258723
Main executable did not export symbols that exist both in the main executable and in DSOs before this patch.
Symbols from object files that override symbols in DSO should be added to .dynsym table.
Differential revision: http://reviews.llvm.org/D16405
llvm-svn: 258672
Summary: It looks like this snuck through in r256143/D15383.
Reviewers: ruiu, grimar
Differential Revision: http://reviews.llvm.org/D16500
llvm-svn: 258599
There was an off by one error because the StringRef.substr functions
second argument is a length, not the end index.
Also updated a few ELF files which failed when run on Jenkins with paths
including the @ character. This is often used in Jenkins for shared
workspace plugin.
Reviewed by Rui Ueyama
llvm-svn: 258583
In InputSection.cpp it was possible to dereference null.
Had to change signature of relocateTlsOptimize to accept pointer instead of reference.
Differential revision: http://reviews.llvm.org/D16466
llvm-svn: 258508
In this code, we avoid calling needsCopyRel in writeTo because
we called that function already in scanRelocs. Making the same
decision twice is a waste and has a risk of a bug that we get
inconsistent resuts.
llvm-svn: 258430
Code for handling TLS relocations was moved out scanRelocs() to new function handleTlsRelocations().
That is because scanRelocs already too large to put more TLS code into it.
Differential revision: http://reviews.llvm.org/D16354
llvm-svn: 258392
Some MIPS relocation (for now R_MIPS_GOT16) requires creation of GOT
entries for symbol not included in the dynamic symbol table. They are
local symbols and non-local symbols with 'local' visibility. Local GOT
entries occupy continuous block between GOT header and regular GOT
entries.
The patch adds initial support for handling local GOT entries. The main
problem is allocating local GOT entries for local symbols. Such entries
should be initialized by high 16-bit of the symbol value. In ideal world
there should be no duplicated entries with the same values. But at the
moment of the `Writer::scanRelocs` call we do not know a value of the
symbol. In this patch we create new local GOT entry for each relocation
against local symbol, though we can exhaust GOT quickly. That needs to
be optimized later. When we calculate relocation we know a final symbol
value and request local GOT entry index. To do that we maintain map
between addresses and local GOT entry indexes. If we start to calculate
relocations in parallel we will have to serialize access to this map.
Differential Revision: http://reviews.llvm.org/D16324
llvm-svn: 258388
Added check for terminator CIE/FDE which has zero data size.
void EHOutputSection<ELFT>::addSectionAux(
...
// If CIE/FDE data length is zero then Length is 4, this
// shall be considered a terminator and processing shall end.
if (Length == 4)
break;
...
After this "Bug 25923 - lld/ELF2 linked application crashes if exceptions were used." is fixed for me. Self link of clang also works.
Initial commit message:
[ELF] - implemented --eh-frame-hdr command line option.
--eh-frame-hdr
Request creation of ".eh_frame_hdr" section and ELF "PT_GNU_EH_FRAME" segment header.
Both gold and the GNU linker support an option --eh-frame-hdr which tell them to construct a header for all the .eh_frame sections. This header is placed in a section named .eh_frame_hdr and also in a PT_GNU_EH_FRAME segment. At runtime the unwinder can find all the PT_GNU_EH_FRAME segments by calling dl_iterate_phdr.
This section contains a lookup table for quick binary search of FDEs.
Detailed info can be found here:
http://www.airs.com/blog/archives/462
Differential revision: http://reviews.llvm.org/D15712
llvm-svn: 257889
MIPS ABI has relocations like R_MIPS_JALR which is just a hint for
linker to make some code optimization. Such relocations should not be
handled as a regular ones and lead to say dynamic relocation creation.
The patch introduces new virtual `Target::isHintReloc` method, overrides
it in the `MipsTargetInfo` class and calls it in the `Writer<ELFT>::scanRelocs`
method.
Differential Revision: http://reviews.llvm.org/D16193
llvm-svn: 257798
--eh-frame-hdr
Request creation of ".eh_frame_hdr" section and ELF "PT_GNU_EH_FRAME" segment header.
Both gold and the GNU linker support an option --eh-frame-hdr which tell them to construct a header for all the .eh_frame sections. This header is placed in a section named .eh_frame_hdr and also in a PT_GNU_EH_FRAME segment. At runtime the unwinder can find all the PT_GNU_EH_FRAME segments by calling dl_iterate_phdr.
This section contains a lookup table for quick binary search of FDEs.
Detailed info can be found here:
http://www.airs.com/blog/archives/462
Differential revision: http://reviews.llvm.org/D15712
llvm-svn: 257753
It seems that __cxa_demangle function on the buildbot tried to demangle
a variable "tlsvar" as a C++ symbol. Do not call that function unless
it does not start with "_Z" which is the prefix of mangled names.
llvm-svn: 257661
Fix: Added missed input file.
Initial commit message:
[ELF/AArch64] - Implemented R_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21 and R_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC relocations
* R_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21 is calculated as Page(G(GTPREL(S+A))) – Page(P), set an ADRP immediate field to bits [32:12] of X; check –2^32 ≤ X < 2^32;
* R_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC is calculated as G(GTPREL(S+A)), set an LD offset field to bits [11:3] of X. No overflow check; check that X&7 = 0.
Differential revision: http://reviews.llvm.org/D16117
llvm-svn: 257596
* R_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21 is calculated as Page(G(GTPREL(S+A))) – Page(P), set an ADRP immediate field to bits [32:12] of X; check –2^32 ≤ X < 2^32;
* R_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC is calculated as G(GTPREL(S+A)), set an LD offset field to bits [11:3] of X. No overflow check; check that X&7 = 0.
Differential revision: http://reviews.llvm.org/D16117
llvm-svn: 257588
MIPS _gp_disp designates offset between start of function and gp pointer
into GOT therefore any relocations against it do not require dynamic
relocation.
llvm-svn: 257492
On MIPS O32 ABI, _gp_disp is a magic symbol designates offset between
start of function and gp pointer into GOT. To make seal with such symbol
we add new method addIgnoredStrong(). It adds ignored symbol with global
binding to prevent the symbol substitution. The addIgnored call is not
enough here because this call adds a weak symbol which might be
substituted by symbol from shared library.
Differential Revision: http://reviews.llvm.org/D16084
llvm-svn: 257449
R_AARCH64_TSTBR14 is calculated as S+A-P,
Set the immediate field of a TBZ/TBNZ instruction to bits [15:2] of X; check -2^15 ≤ X < 2^15
Differential revision: http://reviews.llvm.org/D15824
llvm-svn: 257334
R_AARCH64_CONDBR19 is calculated as S+A-P,
Set the immediate field of a conditional branch instruction to bits [20:2] of X; check -2^20 ≤ X< 2^20.
Afaik there is no document for AARCH64 instruction encoding from official for unknown reason, so
I used gold source code and next link as a reference for implementation: http://kitoslab-eng.blogspot.ru/2012/10/armv8-aarch64-instruction-encoding.html. From which is clear that immediate field of a conditional branch instruction is 5 bits off. That is proved by output which is is equal to gold/bfd now.
Differential revision: http://reviews.llvm.org/D15809
llvm-svn: 257333
We used to have code in SymbolTable constructor to add entry symbols, etc.
That code has been moved to Driver. We can remove the constructor.
llvm-svn: 257214
For historical reasons, some add* functions for SymbolTable returns a
pointer to a SymbolBody, while some are not. This patch is to make them
consistently return a pointer to a newly added symbol.
llvm-svn: 257211
R_X86_64_PLT32 is handled in the same way as R_X86_64_PC32 by
relocateOne(), so this function does not seems to be needed.
Without this code, all tests still pass.
http://reviews.llvm.org/D15971
llvm-svn: 257203
All non-trivial relocation decisions need explanations like this
to help readers understand not only how relocations are handled but
why they are handled these ways. This is a start.
llvm-svn: 257119
In this patch, all symbols are resolved normally and then wrap options
are applied. Renaming is implemented by mutating `Body` pointers of
Symbols. (As a result, Symtab.find(SymbolName)->getName() may return
a string that's different from SymbolName, but that is by design.
I designed the symbol and the symbol table to allow this kind of
operations.)
http://reviews.llvm.org/D15896
llvm-svn: 257075
Summary: This will allow us to remove the AMDGPU support from old ELF.
Reviewers: rafael, ruiu
Differential Revision: http://reviews.llvm.org/D15895
llvm-svn: 257023
String tables in unstripped executable files are fairly large in size.
For example, lld's executable file is about 34.4 MB in my environment,
and of which 3.5 MB is the string table. Efficiency of string table
construction matters.
Previously, the string table was built in an inefficient way. We used
StringTableBuilder to build that and enabled string tail merging,
although tail merging is not effective for the symbol table (you can
only make the string table 0.3% smaller for lld.) Tail merging is
computation intensive task and slow.
This patch eliminates string tail merging.
I changed the way of adding strings to the string table in this patch
too. Previously, strings were added using add() and the same strings
were then passed to getOffset() to get their offsets in the string table.
In this way, getOffset() needs to look up a hash table to get offsets
for given strings. This is a violation of "we look up the symbol table
(or a hash table) only once for each symbol" dogma of the new LLD's
design. Hash table lookup for long C++ mangled names is slow.
I eliminated that lookup in this patch.
In total, this patch improves link time of lld itself about 12%
(3.50 seconds -> 3.08 seconds.)
llvm-svn: 257017
In a UI such as XCode, LLVM source files are in 'libraries' while clang
files are in 'clang libraries'.
This change moves the lld source to 'lld libraries' to make code browsing easier.
It should be NFC as the build itself is still the same, just the structure in a
UI differs.
llvm-svn: 257001
MipsReginfoInputSection is basically just a container of Elf_Mips_Reginfo
struct. This patch makes that struct directly accessible from others.
llvm-svn: 256984
Unlike ObjectFile or ArchiveFile, SharedFile had two parse functions,
parseSoName() and parse(). parse must have been called after parseSoName,
but that requirement was not obvious from their names. (So it looked
like you could call parse() on a shared object file right away.)
This patch rename parseRest. It is now obvious that there's no single
parse function for the shared object file.
llvm-svn: 256898
Previously, we handle archive files with --whole-archive this way:
create instances of ArchiveFile, call getMembers to obtain memory
buffers of archive members, and create ObjectFiles for the members.
We didn't call anything except getMembers if --whole-archive was
specified.
I noticed that we didn't actually have to create ArchiveFile instaces
at all for that case. All we need is to get a list of memory buffers
for members, which can be done by a non-member function.
This patch removes getMembers member function from ArchiveFile.
Also removed unnecessary code for memory management.
llvm-svn: 256893
Test did not catch this either, so I`ll improve it and recommit later.
Original commit message:
[ELF] - Optimize .eh_frame section: remove CIE if all FDEs referencing it were removed.
This patch performs little optimization for eh_frame section.
If all FDE`s that referenced CIE are removed then CIE is also removed from output.
That can happen for example when dropping FDEs that point to dropped sections. Testcase showing that is included.
The same optimization was added to ld about 14 years ago: https://sourceware.org/ml/binutils/2001-12/msg00144.html, gold does not do that it seems.
Differential revision: http://reviews.llvm.org/D15564
llvm-svn: 256693
This patch performs little optimization for eh_frame section.
If all FDE`s that referenced CIE are removed then CIE is also removed from output.
That can happen for example when dropping FDEs that point to dropped sections. Testcase showing that is included.
The same optimization was added to ld about 14 years ago: https://sourceware.org/ml/binutils/2001-12/msg00144.html, gold does not do that it seems.
Differential revision: http://reviews.llvm.org/D15564
llvm-svn: 256638
The linker has to create __tls_get_addr, end and _end symbols.
Previously, these symbols were created in createSections().
But they are not actually related to creating output sections.
This patch moves code out of the function.
llvm-svn: 256441
Rui Ueyama