Instead, folks can use the equivalent variables provided by CMake
to set those. This removal aims to reduce complexity and potential
for confusion when setting the target triple for building the runtimes,
and make it correct when `CMAKE_OSX_ARCHITECTURES` is used (right now
both `-arch` and `--target=` will end up being passed, which is downright
incorrect).
Differential Revision: https://reviews.llvm.org/D112155
This patch removes the ability to build the runtimes in the 32 bit
multilib configuration, i.e. using -m32. Instead of doing this, one
should cross-compile the runtimes for the appropriate target triple,
like we do for all other triples.
As it stands, -m32 has several issues, which all seem to be related to
the fact that it's not well supported by the operating systems that
libc++ support. The simplest path towards fixing this is to remove
support for the configuration, which is also the best course of action
if there is little interest for keeping that configuration. If there
is a desire to keep this configuration around, we'll need to do some
work to figure out the underlying issues and fix them.
Differential Revision: https://reviews.llvm.org/D114473
Reduce code duplication by sharing most of the test suite setup across
the different from-scratch configs.
Differential Revision: https://reviews.llvm.org/D111196
Instead of using TARGET_TRIPLE, which is always set to LLVM_DEFAULT_TARGET_TRIPLE,
use that variable directly to populate the various XXXX_TARGET_TRIPLE
variables in the runtimes.
This re-applies 77396bbc98 and 5099e01568, which were reverted in
850b57c5fb because they broke the build.
Differential Revision: https://reviews.llvm.org/D106009
add_lit_testsuite() takes Lit parameters passed to it and adds them
to the parameters used globally when running all test suites. That
means that a target like `check-all`, which ends up calling Lit on
the whole monorepo, will see the test parameters for all the individual
project's test suites.
So, for example, it would see `--param std=c++03` (from libc++abi), and
`--param std=c++03` (from libc++), and `--param whatever` (from another
project being tested at the same time). While always unclean, that works
when the parameters all agree. However, if the parameters share the same
name but have different values, only one of those two values will be used
and it will be incredibly confusing to understand why one of the test
suites is being run with the incorrect parameter value.
For that reason, this commit moves away from using add_lit_testsuite()'s
PARAM functionality, and serializes the parameter values for the runtimes
in the generated config.py file instead, which is local to the specific
test suite.
Differential Revision: https://reviews.llvm.org/D105991
This commit reverts 5099e01568 and 77396bbc98, which broke the build
in various ways. I'm reverting until I can investigate, since that
change appears to be way more subtle than it seemed.
This is necessary for from-scratch configurations to support the 32-bit
mode of the test suite.
Differential Revision: https://reviews.llvm.org/D105435
Before this patch, Lit parameters that were set as a result of CMake
options were not made available to from-scratch configs. This patch
serializes those parameters into the generated lit config file so that
they are available to all configs.
Differential Revision: https://reviews.llvm.org/D105047
Eventually, this should become the default way of running the tests.
For now, only move a few CI nodes to it, and keep a node that runs the
legacy configuration.
Differential Revision: https://reviews.llvm.org/D97565
The runtimes build uses variables set by add_lit_testsuite to collect
testsuites from all the runtimes.
Differential Revision: https://reviews.llvm.org/D97913
This should allow running tests with the interpreter in some of the
default paths where Python for Windows might be installed.
Differential Revision: https://reviews.llvm.org/D97369
Several subprojects have targets that do the same thing, and they all
follow the same naming convention: llvm-test-depends, clang-test-depends,
lld-test-depends, etc.
This makes libc++ consistent with other LLVM projects.
Thanks to Duncan Exon Smith for noticing and suggesting the change.
Differential Revision: https://reviews.llvm.org/D94499
Also, enable them whenever we detect that gdb is available. Previously,
these tests would basically never run because they relied on a CMake
configuration option that defaulted to OFF.
Differential Revision: https://reviews.llvm.org/D91434
To make it clearer this is about whether the library supports the debug
mode at all, not whether the debug mode is enabled. Per comment by Nico
Weber on IRC.
Some libc++ builds may want to disable support for the debug mode,
for example to reduce code size or because the current implementation
of the debug mode requires a global map. This commit adds the
LIBCXX_ENABLE_DEBUG_MODE CMake option and ties it into the test
suite.
It also adds a CI job to test this configuration going forward.
Differential Revision: https://reviews.llvm.org/D88923
This allows passing parameters to the test suites without using
LLVM_LIT_ARGS. The problem is that we sometimes want to set some
Lit arguments on the CMake command line, but the Lit parameters in
a CMake cache file. If the only knob to do that is LLVM_LIT_ARGS,
the command-line entry overrides the cache one, and the parameters
set by the cache are ignored.
This fixes a current issue with the build bots that they completely
ignore the 'std' param set by Lit, because other Lit arguments are
provided via LLVM_LIT_ARGS on the CMake command-line.
Before this patch, the libc++ test suite first loads lit.site.cfg
(generated by CMake), and then lit.cfg. It's also possible to load
lit.cfg before lit.site.cfg and to point to a custom lit.site.cfg
file using '--param=libcxx_site_config'. However, in that case, lit.cfg
still relies on the site configuration filling up the 'config' object
like the default lit.site.cfg file does, which isn't flexible enough.
This commit simplifies the setup by having just a single Lit site config
file per CMake configuration, and always loading exactly that config file.
However, the config file to use can be selected when setting up CMake via
the LIBCXX_TEST_CONFIG setting. Furthermore, the site configs are entirely
standalone, which means that a new site config can be added that doesn't
need to conform what's expected by config.py.
Differential Revision: https://reviews.llvm.org/D81846
The integration between CMake and executor selection in the new format
wasn't very flexible -- only the default executor and SSH executors were
supported.
This patch makes it possible to specify arbitrary executors with the new
format. With the new testing format, a custom executor is just a script
that gets called with a command-line to execute, and some arguments like
--env, --codesign_identity and --execdir. As such, the default executor
is just run.py.
Remote execution with the SSH executor can be achived by specifying
LIBCXX_EXECUTOR="<path-to-ssh.py> --host <host>". Similarly, arbitrary
scripts can be provided.
When running the tests through `lit` directly instead of through `check-cxx`,
it is required to manually build the `cxx` (and often `cxx_experimental`)
targets. Instead of having to do that manually, this commit adds a new
target `check-cxx-deps` that does that for you.
Instead of hardcoding absolute paths on the build-host in the executables,
use relative paths from the current working directory. Also, use
FILE_DEPENDENCIES to mark the static test env as being required by
the relevant tests.
Given a SSH executor that copies the files to the remote host properly,
the tests can be run on that remote host.
This patch reimplements the dynamic filesystem helper using Posix
functionality instead of relying on Python. The primary reason for
doing this is that it allows running the libc++ test suite on devices
that do not have Python.
Differential Revision: https://reviews.llvm.org/D77140
Previously, filesystem tests would require LIBCXX_FILESYSTEM_DYNAMIC_TEST_ROOT
to be present in the environment and to match the value provided when
compiling, as a macro. This has the problem that it only allows for the
filesystem tests to be run on the same machine they are created.
Instead, we create a temporary directory for each test. Technically,
this is tricky to do because we're relying on some of the code that
we're testing to do this. However, there's no other portable way of
creating temporary direcories in C++, so this is difficult to avoid.
Differential Revision: https://reviews.llvm.org/D76731
We've been meaning to remove those targets for a while, and the fix is
simple enough cause they're all just aliases to other targets.
This is a re-application of f383fb40b1, wich was reverted in 04d48111b
because the build bots had not been updated yet. The build bot configurations
have now been updated not to use the deprecated targets, and I verified
that they were using the non-deprecated targets, so we should be good
unless I missed a bot.
Differential Revision: https://reviews.llvm.org/D76104
Introduced by https://reviews.llvm.org/D72687. This condition can happen
when the tests are not being run at all, and we're only trying to generate
the libc++ headers.
This reverts commit f383fb40b. It looks like several of our build bots
are still using the legacy target names, so we'll change those before
we commit this change again.
We've been meaning to remove those targets for a while, and the fix is
simple enough cause they're all just aliases to other targets.
There's no doubt this commit will break some CI systems, however the
fix is trivial.
Differential Revision: https://reviews.llvm.org/D76104
This reverts commit 41f4dfd63e.
It broke standalone libc++ builds, which now try to use libc++abi from the wrong directory, instead of system instance.
(cherry picked from commit 3573526c0286c9461f0459be1a4592b2214594e7)
Summary:
The `LIBCXX_CXX_ABI_LIBRARY_PATH` CMake variable is cached once in
libcxx/cmake/Modules/HandleLibCXXABI.cmake in the `setup_abi_lib` macro,
and then cached again in libcxx/test/CMakeLists.txt. There, if it is
not set to a value, it is by default set to `LIBCXX_LIBRARY_DIR`.
However, this new value is not actually cached, because the old (empty)
value has been already cached. Use the `FORCE` CMake flag so that it
is saved to the cache.
This should not break anything, because the code changed here previously
had no effect, when it should have.
Reviewers: jroelofs, bcraig, ldionne, EricWF, mclow.lists, vvereschaka, eastig
Reviewed By: vvereschaka
Subscribers: mgorny, christof, dexonsmith, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D69169
Summary:
The current version of the pretty printers are not python3 compatible,
so turn them off by default until sufficiently improved.
Reviewers: MaskRay, tamur
Subscribers: mgorny, christof, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68477
llvm-svn: 373796
Summary:
This commit allows specifying LIBCXX_ENABLE_PARALLEL_ALGORITHMS when
configuring libc++ in CMake. When that option is enabled, libc++ will
assume that the PSTL can be found somewhere on the CMake module path,
and it will provide the C++17 parallel algorithms based on the PSTL
(that is assumed to be available).
The commit also adds support for running the PSTL tests as part of
the libc++ test suite.
The first attempt to commit this failed because it exposed a bug in the
tests for modules. Now that this has been fixed, it should be safe to
commit this.
Reviewers: EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, libcxx-commits, mclow.lists, EricWF
Tags: #libc
Differential Revision: https://reviews.llvm.org/D60480
llvm-svn: 367903
This reverts r366593, which caused unforeseen breakage on the build bots.
I'm reverting until the problems have been figured out and fixed.
llvm-svn: 366603
Summary:
This commit allows specifying LIBCXX_ENABLE_PARALLEL_ALGORITHMS when
configuring libc++ in CMake. When that option is enabled, libc++ will
assume that the PSTL can be found somewhere on the CMake module path,
and it will provide the C++17 parallel algorithms based on the PSTL
(that is assumed to be available).
The commit also adds support for running the PSTL tests as part of
the libc++ test suite.
Reviewers: rodgert, EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, libcxx-commits, mclow.lists, EricWF
Tags: #libc
Differential Revision: https://reviews.llvm.org/D60480
llvm-svn: 366593
Summary: Filesystem doesn't work on Windows, so we need a mechanism to turn it off for the time being.
Reviewers: ldionne, serge-sans-paille, EricWF
Reviewed By: EricWF
Subscribers: mstorsjo, mgorny, christof, jdoerfert, libcxx-commits
Differential Revision: https://reviews.llvm.org/D59619
llvm-svn: 356633
Summary:
This patch treats <filesystem> as a first-class citizen of the dylib,
like all other sub-libraries (e.g. <chrono>). As such, it also removes
all special handling for installing the filesystem library separately
or disabling part of the test suite from the lit command line.
Unlike the previous attempt (r356500), this doesn't remove all the
filesystem tests.
Reviewers: mclow.lists, EricWF, serge-sans-paille
Subscribers: mgorny, christof, jkorous, dexonsmith, jfb, jdoerfert, libcxx-commits
Differential Revision: https://reviews.llvm.org/D59152
llvm-svn: 356518
When I applied r356500 (https://reviews.llvm.org/D59152), I somehow
deleted all of filesystem's tests. I will revert r356500 and re-apply
it properly.
llvm-svn: 356505
Summary:
This patch treats <filesystem> as a first-class citizen of the dylib,
like all other sub-libraries (e.g. <chrono>). As such, it also removes
all special handling for installing the filesystem library separately
or disabling part of the test suite from the lit command line.
Reviewers: mclow.lists, EricWF, serge-sans-paille
Subscribers: mgorny, christof, jkorous, dexonsmith, jfb, jdoerfert, libcxx-commits
Differential Revision: https://reviews.llvm.org/D59152
llvm-svn: 356500
This patch renames the cxx-benchmark-unittests to check-cxx-benchmarks
and converts the target to use LIT in order to make the tests run faster
and provide better output.
In particular this runs each benchmark in a suite one by one, allowing
more parallelism while ensuring output isn't garbage with multiple threads.
Additionally, it adds the CMake flag '-DLIBCXX_BENCHMARK_TEST_ARGS=<list>'
to specify what options are passed when running the benchmarks.
llvm-svn: 346888
The bots were failing to build the cxx_filesystem target, so the
tests were failing. Though this does lead me to wonder how it
was ever working with c++experimental.
llvm-svn: 338095
Summary:
These flags can be specified using the CMake variables
LIBCXX_TEST_LINKER_FLAGS and LIBCXX_TEST_COMPILER_FLAGS.
When building the tests for CHERI I need to pass additional
flags (such as -mabi=n64 or -mabi=purecap) to the compiler
for our test configurations
Reviewers: EricWF
Reviewed By: EricWF
Subscribers: christof, mgorny, cfe-commits
Differential Revision: https://reviews.llvm.org/D42139
llvm-svn: 325914
AddLLVM is needed for several functions that are used in tests and
as such needs to be included from the right context which previously
wasn't the case.
Differential Revision: https://reviews.llvm.org/D40280
llvm-svn: 319515
After speaking with the libcxx owners, they agreed that this is
a bug in the bot that needs to be fixed by the bot owners, and
the CMake changes are correct.
llvm-svn: 313643
This reverts commit 4ad71811d45268d81b60f27e3b8b2bcbc23bd7b9.
There is a bot that is checking out libcxx and lit with nothing
else and then running lit.py against the test tree. Since there's
no LLVM source tree, there's no LLVM CMake. CMake actually
reports this as a warning saying unsupported libcxx configuration,
but I guess someone is depending on it anyway.
llvm-svn: 313607
Louis Dionne