The current StackColoring algorithm does not correctly handle the
situation when some, but not all paths from a BB to the entry node
cross a llvm.lifetime.start. According to an interpretation of the
language reference at
http://llvm.org/docs/LangRef.html#llvm-lifetime-start-intrinsic
this might be correct, but it would cost too much effort to handle
in StackColoring.
To be on the safe side, remove all lifetime markers even in the original
code version (they have never been copied to the optimized version)
to ensure that no path to the entry block will cross a
llvm.lifetime.start.
The same principle applies to paths the a function return and the
llvm.lifetime.end marker, so we remove them as well.
This fixes llvm.org/PR32251.
Also see the discussion at
http://lists.llvm.org/pipermail/llvm-dev/2017-March/111551.html
llvm-svn: 299585
Add support for -polly-codegen-perf-monitoring. When performance monitoring
is enabled, we emit performance monitoring code during code generation that
prints after program exit statistics about the total number of cycles executed
as well as the number of cycles spent in scops. This gives an estimate on how
useful polyhedral optimizations might be for a given program.
Example output:
Polly runtime information
-------------------------
Total: 783110081637
Scops: 663718949365
In the future, we might also add functionality to measure how much time is spent
in optimized scops and how many cycles are spent in the fallback code.
Reviewers: bollu,sebpop
Tags: #polly
Differential Revision: https://reviews.llvm.org/D31599
llvm-svn: 299359
Trivial fix for two testcases. When Polly isn't linked into opt,
independent of whether it's built in-tree or not, these testcases forget
to load the appropriate library.
Contributed-by: Philip Pfaffe <philip.pfaffe@gmail.com>
Differential Revision: https://reviews.llvm.org/D31596
llvm-svn: 299357
Map the new load to the base pointer of the invariant load hoisted load
to be able to find the alias information for it.
Reviewed-by: Tobias Grosser <tobias@grosser.es>
Differential Revision: https://reviews.llvm.org/D30605
llvm-svn: 298507
When not adding constraints on parameters using -polly-ignore-parameter-bounds,
the context may not necessarily list all parameter dimensions. To support code
generation in this situation, we now always iterate over the actual parameter
list, rather than relying on the context to list all parameter dimensions.
llvm-svn: 298197
In commit r219005 lifetime markers have been introduced to mark the lifetime of
the OpenMP context data structure. However, their use seems incorrect and
recently caused a miscompile in ASC_Sequoia/CrystalMk after r298053 which was
not at all related to r298053. r298053 only caused a change in the loop order,
as this change resulted in a different isl internal representation which caused
the scheduler to derive a different schedule. This change then caused the IR to
change, which apparently created a pattern in which LLVM exploites the lifetime
markers. It seems we are using the OpenMP context outside of the lifetime
markers. Even though CrystalMk could probably be fixed by expanding the scope of
the lifetime markers, it is not clear what happens in case the OpenMP function
call is in a loop which will cause a sequence of starting and ending lifetimes.
As it is unlikely that the lifetime markers give any performance benefit, we
just drop them to remove complexity.
llvm-svn: 298192
In case LLVM pointers are annotated with !dereferencable attributes/metadata
or LLVM can look at the allocation from which a pointer is derived, we can know
that dereferencing pointers is safe and can be done unconditionally. We use this
information to proof certain pointers as save to hoist and then hoist them
unconditionally.
llvm-svn: 297375
Simplify ScopDetection::isInvariant(). Essentially deny everything that
is defined within the SCoP and is not load-hoisted.
The previous understanding of "invariant" has a few holes:
- Expressions without side-effects with only invariant arguments, but
are defined withing the SCoP's region with the exception of selects
and PHIs. These should be part of the index expression derived by
ScalarEvolution and not of the base pointer.
- Function calls with that are !mayHaveSideEffects() (typically
functions with "readnone nounwind" attributes). An example is given
below.
@C = external global i32
declare float* @getNextBasePtr(float*) readnone nounwind
...
%ptr = call float* @getNextBasePtr(float* %A, float %B)
The call might return:
* %A, so %ptr aliases with it in the SCoP
* %B, so %ptr aliases with it in the SCoP
* @C, so %ptr aliases with it in the SCoP
* a new pointer everytime it is called, such as malloc()
* a pointer into the allocated block of one of the aforementioned
* any of the above, at random at each call
Hence and contrast to a comment in the base_pointer.ll regression
test, %ptr is not necessarily the same all the time. It might also
alias with anything and no AliasAnalysis can tell otherwise if the
definition is external. It is hence not suitable in the role of a
base pointer.
The practical problem with base pointers defined in SCoP statements is
that it is not available globally in the SCoP. The statement instance
must be executed first before the base pointer can be used. This is no
problem if the base pointer is transferred as a scalar value between
statements. Uses of MemoryAccess::setNewAccessRelation may add a use of
the base pointer anywhere in the array. setNewAccessRelation is used by
JSONImporter, DeLICM and D28518. Indeed, BlockGenerator currently
assumes that base pointers are available globally and generates invalid
code for new access relation (referring to the base pointer of the
original code) if not, even if the base pointer would be available in
the statement.
This could be fixed with some added complexity and restrictions. The
ExprBuilder must lookup the local BBMap and code that call
setNewAccessRelation must check whether the base pointer is available
first.
The code would still be incorrect in the presence of aliasing. There
is the switch -polly-ignore-aliasing to explicitly allow this, but
it is hardly a justification for the additional complexity. It would
still be mostly useless because in most cases either getNextBasePtr()
has external linkage in which case the readnone nounwind attributes
cannot be derived in the translation unit itself, or is defined in the
same translation unit and gets inlined.
Reviewed By: grosser
Differential Revision: https://reviews.llvm.org/D30695
llvm-svn: 297281
Only when load-hoisted we can be sure the base pointer is invariant
during the SCoP's execution. Most of the time it would be added to
the required hoists for the alias checks anyway, except with
-polly-ignore-aliasing, -polly-use-runtime-alias-checks=0 or if
AliasAnalysis is already sure it doesn't alias with anything
(for instance if there is no other pointer to alias with).
Two more parts in Polly assume that this load-hoisting took place:
- setNewAccessRelation() which contains an assert which tests this.
- BlockGenerator which would use to the base ptr from the original
code if not load-hoisted (if the access expression is regenerated)
Differential Revision: https://reviews.llvm.org/D30694
llvm-svn: 297195
There is no point in optimizing unreachable code, hence our test cases should
always return.
This commit is part of a series that makes Polly more robust on the presence of
unreachables.
llvm-svn: 297158
There is no point in optimizing unreachable code, hence our test cases should
always return.
This commit is part of a series that makes Polly more robust on the presence of
unreachables.
llvm-svn: 297150
There is no point in optimizing unreachable code, hence our test cases should
always return.
This commit is part of a series that makes Polly more robust on the presence of
unreachables.
llvm-svn: 297147
Multi-disjunct access maps can easily result in inbound assumptions which
explode in case of many memory accesses and many parameters. This change reduces
compilation time of some larger kernel from over 15 minutes to less than 16
seconds.
Interesting is the test case test/ScopInfo/multidim_param_in_subscript.ll
which has a memory access
[n] -> { Stmt_for_body3[i0, i1] -> MemRef_A[i0, -1 + n - i1] }
which requires folding, but where only a single disjunct remains. We can still
model this test case even when only using limited memory folding.
For people only reading commit messages, here the comment that explains what
memory folding is:
To recover memory accesses with array size parameters in the subscript
expression we post-process the delinearization results.
We would normally recover from an access A[exp0(i) * N + exp1(i)] into an
array A[][N] the 2D access A[exp0(i)][exp1(i)]. However, another valid
delinearization is A[exp0(i) - 1][exp1(i) + N] which - depending on the
range of exp1(i) - may be preferrable. Specifically, for cases where we
know exp1(i) is negative, we want to choose the latter expression.
As we commonly do not have any information about the range of exp1(i),
we do not choose one of the two options, but instead create a piecewise
access function that adds the (-1, N) offsets as soon as exp1(i) becomes
negative. For a 2D array such an access function is created by applying
the piecewise map:
[i,j] -> [i, j] : j >= 0
[i,j] -> [i-1, j+N] : j < 0
After this patch we generate only the first case, except for situations where
we can proove the first case to be invalid and can consequently select the
second without introducing disjuncts.
llvm-svn: 296679
Without this simplification for a loop nest:
void foo(long n1_a, long n1_b, long n1_c, long n1_d,
long p1_b, long p1_c, long p1_d,
float A_1[][p1_b][p1_c][p1_d]) {
for (long i = 0; i < n1_a; i++)
for (long j = 0; j < n1_b; j++)
for (long k = 0; k < n1_c; k++)
for (long l = 0; l < n1_d; l++)
A_1[i][j][k][l] += i + j + k + l;
}
the assumption:
n1_a <= 0 or (n1_a > 0 and n1_b <= 0) or
(n1_a > 0 and n1_b > 0 and n1_c <= 0) or
(n1_a > 0 and n1_b > 0 and n1_c > 0 and n1_d <= 0) or
(n1_a > 0 and n1_b > 0 and n1_c > 0 and n1_d > 0 and
p1_b >= n1_b and p1_c >= n1_c and p1_d >= n1_d)
is taken rather than the simpler assumption:
p9_b >= n9_b and p9_c >= n9_c and p9_d >= n9_d.
The former is less strict, as it allows arbitrary values of p1_* in case, the
loop is not executed at all. However, in practice these precise constraints
explode when combined across different accesses and loops. For now it seems
to make more sense to take less precise, but more scalable constraints by
default. In case we find a practical example where more precise constraints
are needed, we can think about allowing such precise constraints in specific
situations where they help.
This change speeds up the new test case from taking very long (waited at least
a minute, but it probably takes a lot more) to below a second.
llvm-svn: 296456
Instead of iterating over statements and their memory accesses to extract the
set of available base pointers, just directly iterate over all ScopArray
objects. This reflects more the actual intend of the code: collect all arrays
(and their base pointers) to emit alias information that specifies that accesses
to different arrays cannot alias.
This change removes unnecessary uses of MemoryAddress::getBaseAddr() in
preparation for https://reviews.llvm.org/D28518.
llvm-svn: 294574
Before this change we used the name of the base pointer to mark reductions. This
is imprecise as the canonical reference is the ScopArray itself and not the
basepointer of a reduction. Using the base pointer of reductions is problematic
in cases where a single ScopArray is referenced through two different base
pointers.
This change removes unnecessary uses of MemoryAddress::getBaseAddr() in
preparation for https://reviews.llvm.org/D28518.
llvm-svn: 294568
Before this change we created an additional reload in the copy of the incoming
block of a PHI node to reload the incoming value, even though the necessary
value has already been made available by the normally generated scalar loads.
In this change, we drop the code that generates this redundant reload and
instead just reuse the scalar value already available.
Besides making the generated code slightly cleaner, this change also makes sure
that scalar loads go through the normal logic, which means they can be remapped
(e.g. to array slots) and corresponding code is generated to load from the
remapped location. Without this change, the original scalar load at the
beginning of the non-affine region would have been remapped, but the redundant
scalar load would continue to load from the old PHI slot location.
It might be possible to further simplify the code in addOperandToPHI,
but this would not only mean to pull out getNewValue, but to also change the
insertion point update logic. As this did not work when trying it the first
time, this change is likely not trivial. To not introduce bugs last minute, we
postpone further simplications to a subsequent commit.
We also document the current behavior a little bit better.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D28892
llvm-svn: 292486
We rename the test case with -metarenamer to make the variable names easier to
read and add additional check lines that verify the code we currently generate
for PHI nodes. This code is interesting as it contains a PHI node in a
non-affine sub-region, where some incoming blocks are within the non-affine
sub-region and others are outside of the non-affine subregion.
As can be seen in the check lines we currently load the PHI-node value twice.
This commit documents this behavior. In a subsequent patch we will try to
improve this.
llvm-svn: 292470
Summary:
Instead of forbidding such access functions completely, we verify that their
base pointer has been hoisted and only assert in case the base pointer was
not hoisted.
I was trying for a little while to get a test case that ensures the assert is
correctly fired in case of invariant load hoisting being disabled, but I could
not find a good way to do so, as llvm-lit immediately aborts if a command
yields a non-zero return value. As we do not generally test our asserts,
not having a test case here seems OK.
This resolves http://llvm.org/PR31494
Suggested-by: Michael Kruse <llvm@meinersbur.de>
Reviewers: efriedma, jdoerfert, Meinersbur, gareevroman, sebpop, zinob, huihuiz, pollydev
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D28798
llvm-svn: 292213
This feature is currently not supported and an explicit assert to prevent the
introduction of such accesses has been added in r282893. This test case allows
to reproduce the assert (and without the assert the miscompile) added in
r282893. It will help when adding such support at some point.
llvm-svn: 292147
This allows us to delinearize code such as the one below, where the array
sizes are A[][2 * n] as there are n times two elements in the innermost
dimension. Alternatively, we could try to generate another dimension for the
struct in the innermost dimension, but as the struct has constant size,
recovering this dimension is easy.
struct com {
double Real;
double Img;
};
void foo(long n, struct com A[][n]) {
for (long i = 0; i < 100; i++)
for (long j = 0; j < 1000; j++)
A[i][j].Real += A[i][j].Img;
}
int main() {
struct com A[100][1000];
foo(1000, A);
llvm-svn: 288489
Introduce the new flag -polly-codegen-generate-expressions which forces Polly
to code generate AST expressions instead of using our SCEV based access
expression generation even for cases where the original memory access relation
was not changed and the SCEV based access expression could be code generated
without any issue.
This is an experimental option for better testing the isl ast expression
generation. The default behavior of Polly remains unchanged. We also exclude
a couple of cases for which the AST expression is not yet working.
llvm-svn: 287694
Drop instructions that do not influence the memory impact of a basic block.
They are not needed to reproduce the original bug (verified) and will cause
random test noise if we would decide to only model the instructions that
have visible side-effects.
llvm-svn: 287626
Add two store instructions at the end of basic blocks that are required to
reproduce the original bug to ensure we always process and model these basic
blocks. This makes this test case stable even in case we would decide to bail
out early of basic blocks which do not modify the global state. Also add
additional check lines to verify how we model the basic block.
llvm-svn: 287625
Providing the context to the ast generator allows for additional simplifcations
and -- more importantly -- allows to generate loops with only partially bounded
domains, assuming the domains are bounded for all parameter configurations
that are valid as defined by the context.
This change fixes the crash reported in http://llvm.org/PR30956
The original reason why we did not include the context when generating an
AST was that CLooG and later isl used to sometimes transfer some of the
constraints that bound the size of parameters from the context into the
generated AST. This resulted in operations with very large constants, which
sometimes introduced problematic integer overflows. The latest versions of
the isl AST generator are careful to not introduce such constants.
Reported-by: Eli Friedman <efriedma@codeaurora.org>
llvm-svn: 286442
We do not need the size of the outermost dimension in most cases, but if we
allocate memory for newly created arrays, that size is needed.
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D23991
llvm-svn: 281234
Change the code around setNewAccessRelation to allow to use a an existing array
element for memory instead of an ad-hoc alloca. This facility will be used for
DeLICM/DeGVN to convert scalar dependencies into regular ones.
The changes necessary include:
- Make the code generator use the implicit locations instead of the alloca ones.
- A test case
- Make the JScop importer accept changes of scalar accesses for that test case.
- Adapt the MemoryAccess interface to the fact that the MemoryKind can change.
They are named (get|is)OriginalXXX() to get the status of the memory access
before any change by setNewAccessRelation() (some properties such as
getIncoming() do not change even if the kind is changed and are still
required). To get the modified properties, there is (get|is)LatestXXX(). The
old accessors without Original|Latest become synonyms of the
(get|is)OriginalXXX() to not make functional changes in unrelated code.
Differential Revision: https://reviews.llvm.org/D23962
llvm-svn: 280408
Dump polyhedral descriptions of Scops optimized with the isl scheduling
optimizer and the set of post-scheduling transformations applied
on the schedule tree to be able to check the work of the IslScheduleOptimizer
pass at the polyhedral level.
Reviewed-by: Tobias Grosser <tobias@grosser.es>
Differential Revision: https://reviews.llvm.org/D23740
llvm-svn: 279395
We already invalidated a couple of critical values earlier on, but we now
invalidate all instructions contained in a scop after the scop has been code
generated. This is necessary as later scops may otherwise obtain SCEV
expressions that reference values in the earlier scop that before dominated
the later scop, but which had been moved into the conditional branch and
consequently do not dominate the later scop any more. If these very values are
then used during code generation of the later scop, we generate used that are
dominated by the values they use.
This fixes: http://llvm.org/PR28984
llvm-svn: 279047
This will make it easier to switch the default of Polly's invariant load
hoisting strategy and also makes it very clear that these test cases
indeed require invariant code hoisting to work.
llvm-svn: 278667
This is the third patch to apply the BLIS matmul optimization pattern on matmul
kernels (http://www.cs.utexas.edu/users/flame/pubs/TOMS-BLIS-Analytical.pdf).
BLIS implements gemm as three nested loops around a macro-kernel, plus two
packing routines. The macro-kernel is implemented in terms of two additional
loops around a micro-kernel. The micro-kernel is a loop around a rank-1
(i.e., outer product) update. In this change we perform replacement of
the access relations and create empty arrays, which are steps to implement
the packing transformation. In subsequent changes we will implement copying
to created arrays.
Reviewed-by: Tobias Grosser <tobias@grosser.es>
Differential Revision: http://reviews.llvm.org/D22187
llvm-svn: 278666
In case some code -- not guarded by control flow -- would be emitted directly in
the start block, it may happen that this code would use uninitalized scalar
values if the scalar initialization is only emitted at the end of the start
block. This is not a problem today in normal Polly, as all statements are
emitted in their own basic blocks, but Polly-ACC emits host-to-device copy
statements into the start block.
Additional Polly-ACC test coverage will be added in subsequent changes that
improve the handling of PHI nodes in Polly-ACC.
llvm-svn: 278124
Extend the jscop interface to allow the user to export arrays. It is required
that already existing arrays of the list of arrays correspond to arrays
of the SCoP. Each array that is appended to the list will be newly created.
Furthermore, we allow the user to modify access expressions to reference
any array in case it has the same element type.
Reviewed-by: Tobias Grosser <tobias@grosser.es>
Differential Revision: https://reviews.llvm.org/D22828
llvm-svn: 277263
Adding a new pass PolyhedralInfo. This pass will be the interface to Polly.
Initially, we will provide the following interface:
- #IsParallel(Loop *L) - return a bool depending on whether the loop is
parallel or not for the given program order.
Patch by Utpal Bora <cs14mtech11017@iith.ac.in>
Differential Revision: https://reviews.llvm.org/D21486
llvm-svn: 276637
It seems the order in which we generated memory accesses changed such that
the import of these updated memory accesses failed for the 'loop3' statement
in this test case. Unfortunately, the existing CHECK lines were not strict
enough to catch this. Hence, besides fixing the order of the memory access
lines we also ensure that the memory access changes are both clearly visibly
and well checked.
llvm-svn: 276247
Michael Kruse