A bunch of test cases needed to be cleaned up for this, many my fault -
when implementid imported modules I updated test cases by simply
duplicating the prior metadata field - which wasn't always the empty
metadata entry.
llvm-svn: 200731
GPRC_NOR0 is not a subclass of GPRC (because it also contains the ZERO pseudo
register). As a result, we also need to check for it in the spilling code.
llvm-svn: 200288
I disabled the use of TBAA in CodeGen in r200093. This adds a test case that
demonstrates the problems with inttoptr and TBAA in CodeGen (and, specifically,
the problem that causes LLVM to miscompile itself in Release mode). This test
will currently fail if -use-tbaa-in-sched-mi is enabled.
llvm-svn: 200097
For PPC64 SVR (and Darwin), the stores that take byval aggregate parameters
from registers into the stack frame had MachinePointerInfo objects with
incorrect offsets. These offsets are relative to the object itself, not to the
stack frame base.
This fixes self hosting on PPC64 when compiling with -enable-aa-sched-mi.
llvm-svn: 199763
This is a base implementation of the powerpc-apple-darwin asm parser dialect.
* Enables infrastructure (essentially isDarwin()) and fixes up the parsing of asm directives to separate out ELF and MachO/Darwin additions.
* Enables parsing of {r,f,v}XX as register identifiers.
* Enables parsing of lo16() hi16() and ha16() as modifiers.
The changes to the test case are from David Fang (fangism).
llvm-svn: 197324
Aside from a few minor latency corrections, the major change here is a new
hazard recognizer which focuses on better dispatch-group formation on the
POWER7. As with the PPC970's hazard recognizer, the most important thing it
does is avoid load-after-store hazards within the same dispatch group. It uses
the POWER7's special dispatch-group-terminating nop instruction (instead of
inserting multiple regular nop instructions). This new hazard recognizer makes
use of the scheduling dependency graph itself, built using AA information, to
robustly detect the possibility of load-after-store hazards.
significant test-suite performance changes (the error bars are 99.5% confidence
intervals based on 5 test-suite runs both with and without the change --
speedups are negative):
speedups:
MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2
-0.55171% +/- 0.333168%
MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl
-17.5576% +/- 14.598%
MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl
-29.5708% +/- 7.09058%
MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt
-34.9471% +/- 11.4391%
SingleSource/Benchmarks/BenchmarkGame/puzzle
-25.1347% +/- 11.0104%
SingleSource/Benchmarks/Misc/flops-8
-17.7297% +/- 9.79061%
SingleSource/Benchmarks/Shootout-C++/ary3
-35.5018% +/- 23.9458%
SingleSource/Regression/C/uint64_to_float
-56.3165% +/- 25.4234%
SingleSource/UnitTests/Vectorizer/gcc-loops
-18.5309% +/- 6.8496%
regressions:
MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000
18.351% +/- 12.156%
SingleSource/Benchmarks/Shootout-C++/methcall
27.3086% +/- 14.4733%
llvm-svn: 197099
For one predicate to subsume another, they must both check the same condition
register. Failure to check this prerequisite was causing miscompiles.
Fixes PR18003.
llvm-svn: 197089
Convert this test to FileCheck, and improve it to check for the instructions it
is trying to exclude instead of checking for register use (especially because
grepping for r1 can be thrown off, for example, by a use of r12).
llvm-svn: 195979
Some of these tests did not specify a cpu but were also sensitive to
instruction scheduling and/or register assignment choices. A few others
similarly-sensitive tests specified a cpu (often the POWER7), and while the P7
currently uses the default model for PPC64, this will soon change. For those
tests which should not really be cpu-dependent anyway, the cpu is set to the
generic 'ppc64'.
llvm-svn: 195977
We are going to drop debug info without a version number or with a different
version number, to make sure we don't crash when we see bitcode files with
different debug info metadata format.
llvm-svn: 195504
The instruction definitions incorrectly specified that popcntd and popcntw have
record forms; they do not. This mistake was causing invalid code generation.
llvm-svn: 195272
Masking operations (where only some number of the low bits are being kept) are
selected to rldicl(x, 0, mb). If x is a logical right shift (which would become
rldicl(y, 64-n, n)), we might be able to fold the two instructions together:
rldicl(rldicl(x, 64-n, n), 0, mb) -> rldicl(x, 64-n, mb) for n <= mb
The right shift is really a left rotate followed by a mask, and if the explicit
mask is a more-restrictive sub-mask of the mask implied by the shift, only one
rldicl is needed.
llvm-svn: 195185
Stop folding constant adds into GEP when the type size doesn't match.
Otherwise, the adds' operands are effectively being promoted, changing the
conditions of an overflow. Results are different when:
sext(a) + sext(b) != sext(a + b)
Problem originally found on x86-64, but also fixed issues with ARM and PPC,
which used similar code.
<rdar://problem/15292280>
Patch by Duncan Exon Smith!
llvm-svn: 194840
In ELF and COFF an alias is just another offset in a section. There is no way
to represent an alias to something in another file.
In MachO, the spec has the N_INDR type which should allow for exactly that, but
is not currently implemented. Given that it is specified but not implemented,
we error in codegen to avoid miscompiling but don't reject aliases to
declarations in the verifier to leave the option open of implementing it.
In the past we have used alias to declarations as a way of implementing
weakref, which is why it exists in some old tests which this patch updates.
llvm-svn: 194705
On non-Darwin PPC systems, we currently strip off the register name prefix
prior to instruction printing. So instead of something like this:
mr r3, r4
we print this:
mr 3, 4
The first form is the default on Darwin, and is understood by binutils, but not
yet understood by our integrated assembler. Once our integrated-as understands
full register names as well, this temporary option will be replaced by tying
this functionality to the verbose-asm option. The numeric-only form is
compatible with legacy assemblers and tools, and is also gcc's default on most
PPC systems. On the other hand, it is harder to read, and there are some
analysis tools that expect full register names.
llvm-svn: 194384
PR17168 describes a test case that fails when compiling for debug with
fast-isel. Investigation showed that the test was failing because a DBG_VALUE
machine instruction was placed prior to a PHI.
For this problem to occur requires the following:
* Compile for debug
* Compile with fast-isel
* In a block B, fast-isel must partially succeed before punting to DAG-isel
* B must start with a PHI
* The first unhandled node in the DAG must not generate a machine instruction
* A debug value with an order less than that of that first node exists
When all of these circumstances apply, the existing test that an instruction
was not inserted won't fire. Currently it tests whether the block is empty,
or whether the last instruction generated is a phi. When fast-isel has
partially succeeded, the last instruction generated will not be a phi.
Instead, we need to check whether the current insert position is immediately
following a phi. This patch adds that check, and adds the test case from the
PR as a regression test.
llvm-svn: 192976
When generating code for shared libraries, even local calls may be
intercepted, so we need a nop after the call for the linker to fix up the
TOC. Test case adapted from the one provided in PR17354.
llvm-svn: 191440
Large code model on PPC64 requires creating and referencing TOC entries when
using the addis/ld form of addressing. This was not being done in all cases.
The changes in this patch to PPCAsmPrinter::EmitInstruction() fix this. Two
test cases are also modified to reflect this requirement.
Fast-isel was not creating correct code for loading floating-point constants
using large code model. This also requires the addis/ld form of addressing.
Previously we were using the addis/lfd shortcut which is only applicable to
medium code model. One test case is modified to reflect this requirement.
llvm-svn: 190882
This is a re-commit of r190764, with an extra check to make sure that we're not
performing the transformation on illegal types (a small test case has been
added for this as well).
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
llvm-svn: 190771
This is causing test-suite failures.
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
llvm-svn: 190765
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
llvm-svn: 190764
DAGCombiner::isAlias can be called with SrcValue1 or SrcValue2 null, and we
can't use AA in this case (if we try, then the casting code in AA will assert).
llvm-svn: 190763
When a structure is passed by value, and that structure contains a vector
member, according to the PPC ABI, the structure will receive enhanced alignment
(so that the vector within the structure will always be aligned).
This should resolve PR16641.
llvm-svn: 190636
In fast-math mode sqrt(x) is calculated using the fast expansion of the
reciprocal of the reciprocal sqrt expansion. The reciprocal and reciprocal
sqrt expansions use the associated estimate instructions along with some Newton
iterations. Unfortunately, as a result, sqrt(0) was being calculated as NaN,
which is not correct. Now we explicitly return a result of zero if the input is
zero.
llvm-svn: 190624
Aggressive anti-dependency breaking is enabled by default for all PPC cores.
This provides a general speedup on the P7 and other platforms (among other
factors, the instruction group formation for the non-embedded PPC cores is done
during post-RA scheduling). In order to do this safely, the incompatibility
between uses of the MFOCRF instruction and anti-dependency breaking are
resolved by marking MFOCRF with hasExtraSrcRegAllocReq. As noted in the removed
FIXME, the problem was that MFOCRF's output is sensitive to the identify of the
source register, and always paired with a shift to undo this effect. Because
anti-dependency breaking is unaware of this hidden dependency of the shift
amount on the source register of the MFOCRF instruction, changing that register
must be inhibited.
Two test cases were adjusted: The SjLj test was made more insensitive to
register choices and scheduling; the saveCR test disabled anti-dependency
breaking because part of what it is testing is proper register reuse.
llvm-svn: 190587
Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).
llvm-svn: 190205
This patch adds fast-isel support for calls (but not intrinsic calls
or varargs calls). It also removes a badly-formed assert. There are
some new tests just for calls, and also for folding loads into
arguments on calls to avoid extra extends.
llvm-svn: 189701
Yet another chunk of fast-isel code. This one handles various
conversions involving floating-point. (It also includes some
miscellaneous handling throughout the back end for LWA_32 and LWAX_32
that should have been part of the load-store patch.)
llvm-svn: 189677
This is the next big chunk of fast-isel code. The primary purpose is
to implement selection of loads and stores, but there is a lot of
drag-along to support this. The common code to analyze addresses for
both loads and stores is substantial. It's also necessary to add the
materialization code for global values.
Related to load-store processing is the code to fold loads into
integer extends, since otherwise we generate lots of redundant
instructions. We also need to add some overrides to some FastEmit
routines to ensure we don't assign GPR 0 to a virtual register when
this would change the meaning of an instruction.
I added handling selection of a few binary arithmetic instructions, to
enable committing some test cases I wrote a while back.
Finally, ap couple of miscellaneous changes:
* I cleaned up some poor style from a previous patch in
PPCISelLowering.cpp, pointed out by David Blaikie.
* I enlarged the Addr.Offset field to avoid sign problems with 32-bit
offsets.
llvm-svn: 189636
DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.
Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.
Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.
llvm-svn: 189282
Incremental improvement to fast-isel for PPC64. This allows us to
select on ret, sext, and zext. Filling in sext/zext improves some of
the existing logic in handling compare-immediates that needed extends.
A simplified return convention for fast-isel is also added to the
PPC64 calling conventions. All call/return processing for DAG
selection is handled with custom code, so there isn't an existing CC
to rely on here. The include of PPCGenCallingConv.inc causes compiler
warnings due to the 32-bit calling conventions that are not used, so
the dummy function "usePPC32CCs()" is added here to silence those.
Test cases for the return and extend logic are added.
llvm-svn: 189266
First chunk of actual fast-isel selection code. This handles direct
and indirect branches, as well as feeding compares for direct
branches. PPCFastISel::PPCEmitIntExt() is just roughed in and will be
expanded in a future patch. This also corrects a problem with
selection for constant pool entries in JIT mode or with small code
model.
llvm-svn: 189202
copysign/copysignf never become function calls (because the SDAG expansion code
does not lower to the corresponding function call, but rather directly
implements the associated logic), but copysignl almost always is lowered into a
call to the requested libm functon (and, thus, might clobber CTR).
llvm-svn: 188727
We had previously been asserting when faced with a FCOPYSIGN f64, ppcf128 node
because there was no way to expand the FCOPYSIGN node. Because ppcf128 is the
sum of two doubles, and the first double must have the larger magnitude, we
can take the sign from the first double. As a result, in addition to fixing the
crash, this is also an optimization.
llvm-svn: 188655
Modern PPC cores support a floating-point copysign instruction, and we can use
this to lower the FCOPYSIGN node (which is created from calls to the libm
copysign function). A couple of extra patterns are necessary because the
operand types of FCOPYSIGN need not agree.
llvm-svn: 188653
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
llvm-svn: 188513
This is a follow-up to r187693, correcting that code to request the correct
register class. The previous version, with the wrong register class, was not
really correcting the constraints, but rather was removing them. Coincidentally,
this fixed the failing test case in r187693, but obviously created other
problems.
llvm-svn: 188407
Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
llvm-svn: 188173
this records relocation entries in the mach-o object file
for PIC code generation.
tested on powerpc-darwin8, validated against darwin otool -rvV
llvm-svn: 188004
Making use of the recently-added ISD::FROUND, which allows for custom lowering
of round(), the PPC backend will now map frin to round(). Previously, we had
been using frin to lower nearbyint() (and rint() via some custom lowering to
handle the extra fenv flags requirements), but only in fast-math mode because
frin does not tie-to-even. Several users had complained about this behavior,
and this new mapping of frin to round is certainly more appropriate (and does
not require fast-math mode).
In effect, this reverts r178362 (and part of r178337, replacing the nearbyint
mapping with the round mapping).
llvm-svn: 187960
The PPC backend had been missing a pattern to generate mulli for 64-bit
multiples. We had been generating it only for 32-bit multiplies. Unfortunately,
generating li + mulld unnecessarily increases register pressure.
llvm-svn: 187807
Internally, the PowerPC backend names the 32-bit GPRs R[0-9]+, and names the
64-bit parent GPRs X[0-9]+. When matching inline assembly constraints with
explicit register names, on PPC64 when an i64 MVT has been requested, we need
to follow gcc's convention of using r[0-9]+ to refer to the 64-bit (parent)
registers.
At some point, we'll probably want to arrange things so that the generic code
in TargetLowering uses the AsmName fields declared in *RegisterInfo.td in order
to match these inline asm register constraints. If we do that, this change can
be reverted.
llvm-svn: 187693
Support for dynamic stack alignments in the PPC backend has been unfinished, in
part because it depends on dynamic stack realignment (which I only just
recently implemented fully). Now we can also support dynamic allocas with
higher than the default target stack alignment (16 bytes).
In order to round-up the requested size to the maximum requested alignment, we
need an additional register to hold the rounded-up size. We're already using one
scavenged register to hold the previous stack-pointer value (which needs to be
stored with the signal-safe stdux update), and so when we have dynamic allocas
and a large alignment, we allocate two emergency spill slots for the scavenger.
llvm-svn: 186562
First, this changes the base-pointer implementation to remove an unnecessary
complication (and one that is incompatible with how builtin SjLj is
implemented): instead of using r31 as the base pointer when it is not needed as
a frame pointer, now the base pointer will always be r30 when needed.
Second, we introduce another pseudo register, BP, which is used just like the FP
pseudo register to refer to the base register before we know for certain what
register it will be.
Third, we now save BP into the jmp_buf, and restore r30 from that slot in
longjmp. If the function that called setjmp did not use a base pointer, then
r30 will be overwritten by the setjmp-calling-function's restore code. FP
restoration (which is restored into r31) works the same way.
llvm-svn: 186545
Because the builtin longjmp implementation uses a CTR-based indirect jump, when
the control flow arrives at the builtin setjmp call, the CTR register has
necessarily been clobbered. Correspondingly, this adds CTR to the list of
implicit definitions of the builtin setjmp pseudo instruction.
We don't need to add CTR to the implicit definitions of builtin longjmp
because, even though it does clobber the CTR register, the control flow cannot
return to inside the loop unless there is also a builtin setjmp call.
llvm-svn: 186488
This builds on some frame-lowering code that has existed since 2005 (r24224)
but was disabled in 2008 (r48188) because it needed base pointer support to
function correctly. This implementation follows the strategy suggested by Dale
Johannesen in r48188 where the following comment was added:
This does not currently work, because the delta between old and new stack
pointers is added to offsets that reference incoming parameters after the
prolog is generated, and the code that does that doesn't handle a variable
delta. You don't want to do that anyway; a better approach is to reserve
another register that retains to the incoming stack pointer, and reference
parameters relative to that.
And now we do exactly that. If we don't need a frame pointer, then we use r31
as a base pointer. If we do need a frame pointer, then we use r30 as a base
pointer. The base pointer retains the value of the stack pointer before it was
decremented in the prologue. We then use the base pointer to resolve all
negative frame indicies. The basic scheme follows that for base pointers in the
X86 backend.
We use a base pointer when we need to dynamically realign the incoming stack
pointer. This currently applies only to static objects (dynamic allocas with
large alignments, and base-pointer support in SjLj lowering will come in future
commits).
llvm-svn: 186478
When truncating to a format with fewer mantissa bits, APFloat::convert
will perform a right shift of the mantissa by the difference of the
precision of the two formats. Usually, this will result in just the
mantissa bits needed for the target format.
One special situation is if the input number is denormal. In this case,
the right shift may discard significant bits. This is usually not a
problem, since truncating a denormal usually results in zero (underflow)
after normalization anyway, since the result format's exponent range is
usually smaller than the target format's.
However, there is one case where the latter property does not hold:
when truncating from ppc_fp128 to double. In particular, truncating
a ppc_fp128 whose first double of the pair is denormal should result
in just that first double, not zero. The current code however
performs an excessive right shift, resulting in lost result bits.
This is then caught in the APFloat::normalize call performed by
APFloat::convert and causes an assertion failure.
This patch checks for the scenario of truncating a denormal, and
attempts to (possibly partially) replace the initial mantissa
right shift by decrementing the exponent, if doing so will still
result in a valid *target format* exponent.
Index: test/CodeGen/PowerPC/pr16573.ll
===================================================================
--- test/CodeGen/PowerPC/pr16573.ll (revision 0)
+++ test/CodeGen/PowerPC/pr16573.ll (revision 0)
@@ -0,0 +1,11 @@
+; RUN: llc < %s | FileCheck %s
+
+target triple = "powerpc64-unknown-linux-gnu"
+
+define double @test() {
+ %1 = fptrunc ppc_fp128 0xM818F2887B9295809800000000032D000 to double
+ ret double %1
+}
+
+; CHECK: .quad -9111018957755033591
+
Index: lib/Support/APFloat.cpp
===================================================================
--- lib/Support/APFloat.cpp (revision 185817)
+++ lib/Support/APFloat.cpp (working copy)
@@ -1956,6 +1956,23 @@
X86SpecialNan = true;
}
+ // If this is a truncation of a denormal number, and the target semantics
+ // has larger exponent range than the source semantics (this can happen
+ // when truncating from PowerPC double-double to double format), the
+ // right shift could lose result mantissa bits. Adjust exponent instead
+ // of performing excessive shift.
+ if (shift < 0 && isFiniteNonZero()) {
+ int exponentChange = significandMSB() + 1 - fromSemantics.precision;
+ if (exponent + exponentChange < toSemantics.minExponent)
+ exponentChange = toSemantics.minExponent - exponent;
+ if (exponentChange < shift)
+ exponentChange = shift;
+ if (exponentChange < 0) {
+ shift -= exponentChange;
+ exponent += exponentChange;
+ }
+ }
+
// If this is a truncation, perform the shift before we narrow the storage.
if (shift < 0 && (isFiniteNonZero() || category==fcNaN))
lostFraction = shiftRight(significandParts(), oldPartCount, -shift);
llvm-svn: 186409
PPCInstrInfo::insertSelect and PPCInstrInfo::canInsertSelect were computing the
common subclass of the true and false inputs, and then selecting either the
32-bit or the 64-bit isel variant based on the result of calling
PPC::GPRCRegClass.hasSubClassEq(RC) and PPC::G8RCRegClass.hasSubClassEq(RC)
(where RC is the common subclass). Unfortunately, this is not quite right: if
we have something like this:
%vreg8<def> = SELECT_CC_I8 %vreg4<kill>, %vreg7<kill>, %vreg6<kill>, 76;
G8RC_and_G8RC_NOX0:%vreg8 CRRC:%vreg4 G8RC_NOX0:%vreg7,%vreg6
then the common subclass of G8RC_and_G8RC_NOX0 and G8RC_NOX0 is G8RC_NOX0, and
G8RC_NOX0 is not a subclass of G8RC (because it also contains the ZERO8
pseudo-register). As a result, we also need to check the common subclass
against GPRC_NOR0 and G8RC_NOX0 explicitly.
This had not been a problem for clients of insertSelect that called
canInsertSelect first (because it had a compensating mistake), but insertSelect
is also used by the PPC pseudo-instruction expander, and this error was causing
a problem in that context.
This problem was found by csmith.
llvm-svn: 186343
There is a comment at the top of DAGTypeLegalizer::PerformExpensiveChecks
which, in part, says:
// Note that these invariants may not hold momentarily when processing a node:
// the node being processed may be put in a map before being marked Processed.
Unfortunately, this assert would be valid only if the above-mentioned invariant
held unconditionally. This was causing llc to assert when, in fact,
everything was fine.
Thanks to Richard Sandiford for investigating this issue!
Fixes PR16562.
llvm-svn: 186338
This update was done with the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
fi
done
llvm-svn: 186280
This was done with the following sed invocation to catch label lines demarking function boundaries:
sed -i '' "s/^;\( *\)\([A-Z0-9_]*\):\( *\)test\([A-Za-z0-9_-]*\):\( *\)$/;\1\2-LABEL:\3test\4:\5/g" test/CodeGen/*/*.ll
which was written conservatively to avoid false positives rather than false negatives. I scanned through all the changes and everything looks correct.
llvm-svn: 186258
We had patterns to match v4i32 immAllZerosV -> V_SET0, but not patterns for
v8i16 (which occurs in the test case) or v16i8. The same was true for
V_SETALLONES (so I added the associated patterns for those as well).
Another bug found by llvm-stress.
llvm-svn: 186108
This fixes a bug (found by csmith) at -O0 where we attempt to create a RLWIMI
with an out-of-range operand. Most uses of the isRunOfOnes function are guarded
by a condition that the value is not zero. This was not true in two places, and
in both places a zero input would result in an out-of-rage MB value (= 32).
To fix this, isRunOfOnes returns false on a zero input (and I've remove one
now-redundant guard).
llvm-svn: 186101
When computing currently-live registers, the register scavenger excludes undef
uses. As a result, undef uses are ignored when computing the restore points of
registers spilled into the emergency slots. While the register scavenger
normally excludes from consideration, when scavenging, registers used by the
current instruction, we need to not exclude undef uses. Otherwise, we might end
up requiring more emergency spill slots than we have (in the case where the
undef use *is* the currently-spilled register).
Another bug found by llvm-stress.
llvm-svn: 186067
Because integer BUILD_VECTOR operands may have a larger type than the result's
vector element type, and all operands must have the same type, when widening a
BUILD_VECTOR node by adding UNDEFs, we cannot use the vector element type, but
rather must use the type of the existing operands.
Another bug found by llvm-stress.
llvm-svn: 185960
A more complete example of the bug in PR16556 was recently provided,
showing that the previous fix was not sufficient. The previous fix is
reverted herein.
The real problem is that ReplaceNodeResults() uses LowerFP_TO_INT as
custom lowering for FP_TO_SINT during type legalization, without
checking whether the input type is handled by that routine.
LowerFP_TO_INT requires the input to be f32 or f64, so we fail when
the input is ppcf128.
I'm leaving the test case from the initial fix (r185821) in place, and
adding the new test as another crash-only check.
llvm-svn: 185959
in-tree implementations of TargetLoweringBase::isFMAFasterThanMulAndAdd in
order to resolve the following issues with fmuladd (i.e. optional FMA)
intrinsics:
1. On X86(-64) targets, ISD::FMA nodes are formed when lowering fmuladd
intrinsics even if the subtarget does not support FMA instructions, leading
to laughably bad code generation in some situations.
2. On AArch64 targets, ISD::FMA nodes are formed for operations on fp128,
resulting in a call to a software fp128 FMA implementation.
3. On PowerPC targets, FMAs are not generated from fmuladd intrinsics on types
like v2f32, v8f32, v4f64, etc., even though they promote, split, scalarize,
etc. to types that support hardware FMAs.
The function has also been slightly renamed for consistency and to force a
merge/build conflict for any out-of-tree target implementing it. To resolve,
see comments and fixed in-tree examples.
llvm-svn: 185956
ScalarEvolution::getSignedRange uses ComputeNumSignBits from ValueTracking on
ashr instructions. ComputeNumSignBits can return zero, but this case was not
handled correctly by the code in getSignedRange which was calling:
APInt::getSignedMinValue(BitWidth).ashr(NS - 1)
with NS = 0, resulting in an assertion failure in APInt::ashr.
Now, we just return the conservative result (as with NS == 1).
Another bug found by llvm-stress.
llvm-svn: 185955
When folding sub x, x (and other similar constructs), where x is a vector, the
result is a vector of zeros. After type legalization, make sure that the input
zero elements have a legal type. This type may be larger than the result's
vector element type.
This was another bug found by llvm-stress.
llvm-svn: 185949
In the commit message to r185476 I wrote:
>The PowerPC-specific modifiers VK_PPC_TLSGD and VK_PPC_TLSLD
>correspond exactly to the generic modifiers VK_TLSGD and VK_TLSLD.
>This causes some confusion with the asm parser, since VK_PPC_TLSGD
>is output as @tlsgd, which is then read back in as VK_TLSGD.
>
>To avoid this confusion, this patch removes the PowerPC-specific
>modifiers and uses the generic modifiers throughout. (The only
>drawback is that the generic modifiers are printed in upper case
>while the usual convention on PowerPC is to use lower-case modifiers.
>But this is just a cosmetic issue.)
This was unfortunately incorrect, there is is fact another,
serious drawback to using the default VK_TLSLD/VK_TLSGD
variant kinds: using these causes ELFObjectWriter::RelocNeedsGOT
to return true, which in turn causes the ELFObjectWriter to emit
an undefined reference to _GLOBAL_OFFSET_TABLE_.
This is a problem on powerpc64, because it uses the TOC instead
of the GOT, and the linker does not provide _GLOBAL_OFFSET_TABLE_,
so the symbol remains undefined. This means shared libraries
using TLS built with the integrated assembler are currently
broken.
While the whole RelocNeedsGOT / _GLOBAL_OFFSET_TABLE_ situation
probably ought to be properly fixed at some point, for now I'm
simply reverting the r185476 commit. Now this in turn exposes
the breakage of handling @tlsgd/@tlsld in the asm parser that
this check-in was originally intended to fix.
To avoid this regression, I'm also adding a different fix for
this problem: while common code now parses @tlsgd as VK_TLSGD,
a special hack in the asm parser translates this code to the
platform-specific VK_PPC_TLSGD that the back-end now expects.
While this is not really pretty, it's self-contained and
shouldn't hurt anything else for now. One the underlying
problem is fixed, this hack can be reverted again.
llvm-svn: 185945
This fixes another bug found by llvm-stress!
If we happen to be doing an i64 load or store into a stack slot that has less
than a 4-byte alignment, then the frame-index elimination may need to use an
indexed load or store instruction (because the offset may not be a multiple of
4, a requirement of the STD/LD instructions). The extra register needed to hold
the offset comes from the register scavenger, and it is possible that the
scavenger will need to use an emergency spill slot. As a result, we need to
make sure that a spill slot is allocated when doing an i64 load/store into a
less-than-4-byte-aligned stack slot.
Because test cases for things like this tend to be fairly fragile, I've
concatenated a few small bugpoint-reduced test cases together to form the
regression test.
llvm-svn: 185907
A setting in MCAsmInfo defines the "assembler dialect" to use. This is used
by common code to choose between alternatives in a multi-alternative GNU
inline asm statement like the following:
__asm__ ("{sfe|subfe} %0,%1,%2" : "=r" (out) : "r" (in1), "r" (in2));
The meaning of these dialects is platform specific, and GCC defines those
for PowerPC to use dialect 0 for old-style (POWER) mnemonics and 1 for
new-style (PowerPC) mnemonics, like in the example above.
To be compatible with inline asm used with GCC, LLVM ought to do the same.
Specifically, this means we should always use assembler dialect 1 since
old-style mnemonics really aren't supported on any current platform.
However, the current LLVM back-end uses:
AssemblerDialect = 1; // New-Style mnemonics.
in PPCMCAsmInfoDarwin, and
AssemblerDialect = 0; // Old-Style mnemonics.
in PPCLinuxMCAsmInfo.
The Linux setting really isn't correct, we should be using new-style
mnemonics everywhere. This is changed by this commit.
Unfortunately, the setting of this variable is overloaded in the back-end
to decide whether or not we are on a Darwin target. This is done in
PPCInstPrinter (the "SyntaxVariant" is initialized from the MCAsmInfo
AssemblerDialect setting), and also in PPCMCExpr. Setting AssemblerDialect
to 1 for both Darwin and Linux no longer allows us to make this distinction.
Instead, this patch uses the MCSubtargetInfo passed to createPPCMCInstPrinter
to distinguish Darwin targets, and ignores the SyntaxVariant parameter.
As to PPCMCExpr, this patch adds an explicit isDarwin argument that needs
to be passed in by the caller when creating a target MCExpr. (To do so
this patch implicitly also reverts commit 184441.)
llvm-svn: 185858
Another bug found by llvm-stress! This fixes hitting
llvm_unreachable("Invalid integer vector compare condition");
at the end of getVCmpInst in PPCISelDAGToDAG.
llvm-svn: 185855
PPCTargetLowering::LowerFP_TO_INT() expects its source operand to be
either an f32 or f64, but this is not checked. A long double
(ppcf128) operand will normally be custom-lowered to a conversion to
f64 in this context. However, this isn't the case for an UNDEF node.
This patch recognizes a ppcf128 as a legal source operand for
FP_TO_INT only if it's an undef, in which case it creates an undef of
the target type.
At some point we might want to do a wholesale custom lowering of
ISD::UNDEF when the type is ppcf128, but it's not really clear that's
a great idea, and probably more work than it's worth for a situation
that only arises in the case of a programming error. At this point I
think simple is best.
The test case comes from PR16556, and is a crash-test only.
llvm-svn: 185821
This fixes a bug (found by llvm-stress) in
DAGTypeLegalizer::PromoteIntRes_BUILD_VECTOR where it assumed that the result
type would always be larger than the original operands. This is not always
true, however, with boolean vectors. For example, promoting a node of type v8i1
(where the operands will be of type i32, the type to which i1 is promoted) will
yield a node with a result vector element type of i16 (and operands of type
i32). As a result, we cannot blindly assume that we can ANY_EXTEND the operands
to the result type.
llvm-svn: 185794
Just as with mfocrf, it is also preferable to use mtocrf instead of
mtcrf when only a single CR register is to be written.
Current code however always emits mtcrf. This probably does not matter
when using an external assembler, since the GNU assembler will in fact
automatically replace mtcrf with mtocrf when possible. It does create
inefficient code with the integrated assembler, however.
To fix this, this patch adds MTOCRF/MTOCRF8 instruction patterns and
uses those instead of MTCRF/MTCRF8 everything. Just as done in the
MFOCRF patch committed as 185556, these patterns will be converted
back to MTCRF if MTOCRF is not available on the machine.
As a side effect, this allows to modify the MTCRF pattern to accept
the full range of mask operands for the benefit of the asm parser.
llvm-svn: 185561
The PowerPC-specific modifiers VK_PPC_TLSGD and VK_PPC_TLSLD
correspond exactly to the generic modifiers VK_TLSGD and VK_TLSLD.
This causes some confusion with the asm parser, since VK_PPC_TLSGD
is output as @tlsgd, which is then read back in as VK_TLSGD.
To avoid this confusion, this patch removes the PowerPC-specific
modifiers and uses the generic modifiers throughout. (The only
drawback is that the generic modifiers are printed in upper case
while the usual convention on PowerPC is to use lower-case modifiers.
But this is just a cosmetic issue.)
llvm-svn: 185476
There are a couple of (small) related changes here:
1. The printed name of the VRSAVE register has been changed from VRsave to
vrsave in order to match the name accepted by GNU binutils.
2. Support for parsing vrsave has been added to the asm parser (it seems that
there was no test case specifically covering this code, so I've added one).
3. The list of Altivec registers, which was common to all calling conventions,
has been separated out. This allows us to define the base CSR lists, and then
lists for each ABI with Altivec included. This allows SjLj, for example, to
work correctly on non-Altivec targets without using unnatural definitions of
the NoRegs CSR list.
4. VRSAVE is now always reserved on non-Darwin targets and all Altivec
registers are reserved when Altivec is disabled.
With these changes, it is now possible to compile a function containing
__builtin_unwind_init() on Linux/PPC64 with debugging information. This did not
work previously because GNU binutils assumes that all .cfi_offset offsets will
be 8-byte aligned on PPC64 (and errors out if you provide a non-8-byte-aligned
offset). This is not true for the vrsave register, however, because this
register is used only on Darwin, GCC does not bother printing a .cfi_offset
entry for it (even though there is a slot in the stack frame for it as
specified by the ABI). This change allows us to do the same: we will also not
print .cfi_offset directives for vrsave.
llvm-svn: 185409
When phis get lowered, destination copies are inserted using an iterator that is
determined once for all phis in the block, which BuildMI interprets as a request
to insert an instruction directly before the iterator. In the case of a cyclic
phi, source copies may also be inserted directly before this iterator, which can
cause source copies to be inserted before destination copies. The fix is to keep
an iterator to the last phi and then advance it while lowering each phi in order
to insert destination copies directly after the phis.
llvm-svn: 185363
Rafael Espindola