String pooling is not guaranteed by the standard, so if
you're comparing two different string literals for equality,
you have to use strcmp.
llvm-svn: 277831
Summary:
This change fixes issues with `LLVM_CONSTEXPR` functions and
`TrailingObjects::FixedSizeStorage`. In particular, some of the
functions marked `LLVM_CONSTEXPR` used by `FixedSizeStorage` were not
implemented such that they evaluate successfully as part of a constant
expression despite constant arguments.
This change also implements a more traditional template-meta path to
accommodate MSVC, and adds unit tests for `FixedSizeStorage`.
Drive-by fix: the access control for members of `TrailingObjectsImpl` is
tightened.
Reviewers: faisalv, rsmith, aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D22668
llvm-svn: 277270
These loop from 0 to AEK_XSCALE, which is currently defined as 0x80000000, and
thus the tests loop over the entire int range, which is unreasonable
and also too slow in debug builds.
llvm-svn: 276969
Add unittest to {ARM | AArch64}TargetParser,and by the way correct problems as below:
1.Correct a incorrect indexing problem in AArch64TargetParser. The architecture enumeration
is shared across ARM and AArch64 in original implementation.But In the code,I just used the
index which was offset by the ARM, and this would index into the array incorrectly. To make
AArch64 has its own arch enum,or we will do a lot of slowly iterating.
2.Correct a spelling error. The parameter of llvm::AArch64::getArchExtName.
3.Correct a writing mistake, in llvm::ARM::parseArchISA.
Differential Revision: https://reviews.llvm.org/D21785
llvm-svn: 276957
This allows ErrorAsOutParameter to work better with "optional" errors. For
example, consider a function where for certain input values it is known that
the function can't fail. This can now be written as:
Result foo(Arg X, Error *Err) {
ErrorAsOutParameter EAO(Err);
if (<Error Condition>) {
if (Err)
*Err = <report error>;
else
llvm_unreachable("Unexpected failure!");
}
}
Rather than having to construct an ErrorAsOutParameter under every conditional
where Err is known to be non-null.
llvm-svn: 276430
Summary:
Given that we had a bug on max/minUIntN(64), these should have tests
too.
Reviewers: rnk
Subscribers: dylanmckay, llvm-commits
Differential Revision: https://reviews.llvm.org/D22443
llvm-svn: 275723
Summary:
Previously we were doing 1 << S. "1" is an int, so this doesn't work
when S >= 32.
This patch also adds some static_asserts to these functions to ensure
that we don't hit UB by shifting left too much.
Reviewers: rnk
Subscribers: llvm-commits, dylanmckay
Differential Revision: https://reviews.llvm.org/D22441
llvm-svn: 275719
Summary:
This shift is undefined behavior (and, as compiled by clang, gives the
wrong answer for maxUIntN(64)).
Reviewers: mkuper
Subscribers: llvm-commits, jroelofs, rsmith
Differential Revision: https://reviews.llvm.org/D22430
llvm-svn: 275656
When concatenating two error lists the ErrorList::join method (which is called
by joinErrors) was failing to set the checked bit on the second error, leading
to a 'failure to check error' assertion.
llvm-svn: 274249
This fixes an issue where occurrence counts would be unexpectedly
reset when parsing different parts of a command line multiple
times.
**ORIGINAL COMMIT MESSAGE**
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
llvm-svn: 274171
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
Differential Revision: http://reviews.llvm.org/D21485
llvm-svn: 274054
Differential Revision: http://reviews.llvm.org/D19842
Corresponding clang patch: http://reviews.llvm.org/D19843
Re-commit after addressing issues with of generating too many warnings for Windows and asan test failures
Patch by Eric Niebler
llvm-svn: 272555
The architecture enumeration is shared across ARM and AArch64. However, the
data is not. The code incorrectly would index into the array using the
architecture index which was offset by the ARMv7 architecture enumeration. We
do not have a marker for indicating the architectural family to which the
enumeration belongs so we cannot be clever about offsetting the index (at least
it is not immediately apparent to me). Instead, fall back to the tried-and-true
method of slowly iterating the array (its not a large array, so the impact of
this is not too high).
Because of the incorrect indexing, if we were lucky, we would crash, but usually
we would return an invalid StringRef. We did not have any tests for the AArch64
target parser previously;. Extend the previous tests I had added for ARM to
cover AArch64 for ensuring that we return expected StringRefs.
Take the opportunity to change some iterator types to references.
This work is needed to support parsing `.arch name` directives in the AArch64
target asm parser.
llvm-svn: 272145
This allows mapping of any endian-aware type whose underlying
type (e.g. uint32_t) provides a ScalarTraits specialization.
Reviewed by: majnemer
Differential Revision: http://reviews.llvm.org/D21057
llvm-svn: 272049
StringError can be used to represent Errors that aren't recoverable based on
the error type, but that have a useful error message that can be reported to
the user or logged.
llvm-svn: 270948
Summary:
Add support to control where files for a distributed backend (the
individual index files and optional imports files) are created.
This is invoked with a new thinlto-prefix-replace option in the gold
plugin and llvm-lto. If specified, expects a string of the form
"oldprefix:newprefix", and instead of generating these files in the
same directory path as the corresponding bitcode file, will use a path
formed by replacing the bitcode file's path prefix matching oldprefix
with newprefix.
Also add a new replace_path_prefix helper to Path.h in libSupport.
Depends on D19636.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19644
llvm-svn: 269771
toString() consumes an Error and returns a string representation of its
contents. This commit also adds a message() method to ErrorInfoBase for
convenience.
Differential Revision: http://reviews.llvm.org/D19883
llvm-svn: 268465
In gcc, \ escapes every character in response files. It is true that this makes
it harder to mention Windows files in rsp files, but not doing this means clang
disagrees with gcc, and also disagrees with the shell (on non-Windows) which
rsp file quoting is supposed to match. clang isn't free to choose what to do
here.
In general, the idea for response files is to take bits of your command line
and write them to a file unchanged, and have things work the same way. Since
the command line would've been interpreted by the shell, things in the rsp file
need to be subject to the same shell quoting rules.
People who want to put Windows-style paths in their response files either need
to do any of:
* escape their backslashes
* or use clang-cl which uses cl.exe/cmd.exe quoting rules
* pass --rsp-quoting=windows to clang to tell it to use
cl.exe/cmd.exe quoting rules for response files.
Fixes PR27464.
http://reviews.llvm.org/D19417
llvm-svn: 267556
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
Some Include What You Use suggestions were used too.
Use anonymous namespaces in source files.
Differential revision: http://reviews.llvm.org/D18778
llvm-svn: 265454
destruction.
This makes the Expected<T> class behave like Error, even when in success mode.
Expected<T> values must be checked to see whether they contain an error prior
to being dereferenced, assigned to, or destructed.
llvm-svn: 265446
Summary:
A character within a string literal is not escaped correctly.
In this case, there is no semantic change because the invalid character turn out to be NUL anyway.
note: "\0x12" is equivalent to {0, 'x', '1', '2'} and not { 12 }.
This issue was found by clang-tidy.
Reviewers: rnk
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D18747
llvm-svn: 265376
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
Reapply r265094 which was reverted in r265102 because it broke
MSVC bots (constexpr is not supported).
http://reviews.llvm.org/D16325
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265107
This reverts commit r265096, r265095, and r265094.
Windows build is broken, and the validation does not pass.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265102
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265094
The implementation is fairly obvious. This is preparation for using
some blobs in bitcode.
For clarity (and perhaps future-proofing?), I moved the call to
JumpToBit in BitstreamCursor::readRecord ahead of calling
MemoryObject::getPointer, since JumpToBit can theoretically (a) read
bytes, which (b) invalidates the blob pointer.
This isn't strictly necessary the two memory objects we have:
- The return of RawMemoryObject::getPointer is valid until the memory
object is destroyed.
- StreamingMemoryObject::getPointer is valid until the next chunk is
read from the stream. Since the JumpToBit call is only going ahead
to a word boundary, we'll never load another chunk.
However, reordering makes it clear by inspection that the blob returned
by BitstreamCursor::readRecord will be valid.
I added some tests for StreamingMemoryObject::getPointer and
BitstreamCursor::readRecord.
llvm-svn: 264549
Change the filename to indicate this is a test, rename the tests, move
them into an anonymous namespace, and rename some variables. All to
match our usual style before making further changes.
llvm-svn: 264548
Duncan P. N. Exon Smith