We do not have to spread using the precompiled binaries in the tests,
when we can use YAML. This patch removes the dynrel.elf binary and adds
a few comments to the test cases.
Differential revision: https://reviews.llvm.org/D63641
llvm-svn: 364052
The check against the output of `od` in the affected tests expect a
specific input offset format. They also expect a specific offset value,
not consistent with the EXAMPLE section for `od` in POSIX.1-2017
Chapter 4, while using the `-j` option. In particular, the example shows
that the input offset begins at 0 following the bytes skipped.
This patch adjusts the matching of the input offset to be more generic.
In order to avoid false matches, it restricts the number of bytes to be
formatted.
llvm-svn: 363829
1) `-x foo` currently dumps one `foo`. This change makes it dump all `foo`.
2) `-x foo -x foo` currently dumps `foo` twice. This change makes it dump `foo` once.
In addition, if foo has section index 9, `-x foo -x 9` dumps `foo` once.
3) Give a warning instead of an error if `foo` does not exist.
The new behaviors match GNU readelf.
Also, print a new line as a separator between two section dumps.
GNU readelf uses two lines, but one seems good enough.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D63475
llvm-svn: 363683
Summary: Implements bug [[ https://bugs.llvm.org/show_bug.cgi?id=42204 | 42204 ]]. llvm-strip now warns when the same input file is used more than once, and errors when stdin is used more than once.
Reviewers: jhenderson, rupprecht, espindola, alexshap
Reviewed By: jhenderson, rupprecht
Subscribers: emaste, arichardson, jakehehrlich, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63122
llvm-svn: 363638
Summary:
The "sparc"/"sparcel" architectures appears in ArchMap (used by -B option) but not in OutputFormatMap (used by -I/-O option). Add their targets into OutputFormatMap for consistency.
Note that AFAIK there're no targets for 32-bit little-endian SPARC ("elf32-sparcel") in GNU binutils.
Reviewers: espindola, alexshap, rupprecht, jhenderson, compnerd, jakehehrlich
Reviewed By: jhenderson, compnerd, jakehehrlich
Subscribers: jyknight, emaste, arichardson, fedor.sergeev, jakehehrlich, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63238
llvm-svn: 363524
Summary: Tidied up errors during command line parsing to be more consistent with the rest of llvm-objcopy errors.
Reviewers: jhenderson, rupprecht, espindola, alexshap
Reviewed By: jhenderson, rupprecht
Subscribers: emaste, arichardson, MaskRay, llvm-commits, jakehehrlich
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62973
llvm-svn: 363350
Summary: AFAIK, the "sparc" target is big endian and the target for 32-bit little-endian SPARC is denoted as "sparcel". This patch fixes the endianness of "sparc" target and adds "sparcel" target for 32-bit little-endian SPARC.
Reviewers: espindola, alexshap, rupprecht, jhenderson
Reviewed By: jhenderson
Subscribers: jyknight, emaste, arichardson, fedor.sergeev, jakehehrlich, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63251
llvm-svn: 363336
Summary:
When llvm-objcopy sorts sections during finalization, it only sorts based on the offset, which can cause the group section to come after the sections it contains. This causes link failures when using gold to link objects created by llvm-objcopy.
Fix this for now by copying GNU objcopy's behavior of placing SHT_GROUP sections first. In the future, we may want to remove this sorting entirely to more closely preserve the input file layout.
This fixes https://bugs.llvm.org/show_bug.cgi?id=42052.
Reviewers: jakehehrlich, jhenderson, MaskRay, espindola, alexshap
Reviewed By: MaskRay
Subscribers: phuongtrang148993, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62620
llvm-svn: 362973
Summary:
Recompute and update offset/size fields so that we can implement llvm-objcopy options like --only-section.
This patch is the first step and focuses on supporting load commands that covered by existing tests: executable files and
dynamic libraries are not supported.
Reviewers: alexshap, rupprecht, jhenderson
Reviewed By: alexshap, rupprecht
Subscribers: compnerd, jakehehrlich, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62652
llvm-svn: 362863
This implements the functionality described in
https://lld.llvm.org/Partitions.html. It works as follows:
- Reads the section headers using the ELF header at file offset 0;
- If extracting a loadable partition:
- Finds the section containing the required partition ELF header by looking it up in the section table;
- Reads the ELF and program headers from the section.
- If extracting the main partition:
- Reads the ELF and program headers from file offset 0.
- Filters the section table according to which sections are in the program headers that it read:
- If ParentSegment != nullptr or section is not SHF_ALLOC, then it goes in.
- Sections containing partition ELF headers or program headers are excluded as there are no headers for these in ordinary ELF files.
Differential Revision: https://reviews.llvm.org/D62364
llvm-svn: 362818
This is https://bugs.llvm.org/show_bug.cgi?id=42122.
If an object file has a size less than program header's file [offset + size]
(i.e. if we have overflow), llvm-objcopy crashes instead of reporting a
error.
The patch fixes this issue.
Differential revision: https://reviews.llvm.org/D62898
llvm-svn: 362778
Includes a fix for an introduced build failure due to a post c++11 use of std::mismatch.
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362484
This reverts commit r362407. It broke compilation of
llvm/lib/Object/ArchiveWriter.cpp:
error: type 'llvm::sys::path::const_iterator' does not provide a call
operator
llvm-svn: 362413
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362407
This patch brings various error messages into line with each other, by
removing trailing full stops, and making the first letter lower-case.
This addresses https://bugs.llvm.org/show_bug.cgi?id=40859.
Reviewed by: jhenderson, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D62072
Patch by Alex Brachet
llvm-svn: 361384
This patch adds a number of tests to test various cases not covered by
existing tests. All of them work correctly, with no need to change
llvm-objcopy itself, although some do indicate possible areas for
improvement.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D61727
llvm-svn: 360422
Prior to this patch, llvm-objcopy's error messages for archives with
unsupported members only mentioned the archive name, not the member
name, making them unhelpful. This change improves it by approximately
following GNU objcopy's error message syntax of
"<archive name>(<member name>): <problem>".
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D61674
llvm-svn: 360251
This patch adds support for --prefix-alloc-sections, which adds a prefix
to every allocated section names.
It adds a prefix after renaming section names by --rename-section as GNU
objcopy does.
Fixes PR41266: https://bugs.llvm.org/show_bug.cgi?id=41266
Differential Revision: https://reviews.llvm.org/D60042
Patch by Seiya Nuta.
llvm-svn: 360233
If certain switches are not specified, llvm-strip behaves as if
--strip-all were specified. This means that for testing, when we don't
want the stripping behaviour, we have to specify one of these switches,
which can be confusing. This change adds --no-strip-all to allow an
alternative way of suppressing the default stripping, in a less
confusing manner.
Reviewed by: jakehehrlich, MaskRay
Differential Revision: https://reviews.llvm.org/D61377
llvm-svn: 359781
Previously we did not report this.
Also this removes multiple lookups in the map
what cleanups the code.
Differential revision: https://reviews.llvm.org/D61322
llvm-svn: 359663
-t is --symbols in llvm-readobj but --section-details (unimplemented) in readelf.
The confusing option should not be used since we aim for improving
compatibility.
Keep just one llvm-readobj -t use case in test/tools/llvm-readobj/symbols.test
llvm-svn: 359661
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
GNU objcopy uses bfd_elf_get_default_section_type to decide the candidate section type,
which roughly translates to our [a] (I assume SEC_COMMON implies SHF_ALLOC):
(!(Sec.Flags & ELF::SHF_ALLOC) || Flags & (SectionFlag::SecContents | SectionFlag::SecLoad)))
Then, it updates the section type in bfd/elf.c:elf_fake_sections if:
if (this_hdr->sh_type == SHT_NULL)
this_hdr->sh_type = sh_type; // common case
else if (this_hdr->sh_type == SHT_NOBITS
&& sh_type == SHT_PROGBITS
&& (asect->flags & SEC_ALLOC) != 0) // uncommon case
...
this_hdr->sh_type = sh_type;
If the following condition is met the uncommon branch is executed:
if (elf_section_type (osec) == SHT_NULL
&& (osec->flags == isec->flags
|| (final_link
&& ((osec->flags ^ isec->flags)
& ~(SEC_LINK_ONCE | SEC_LINK_DUPLICATES | SEC_RELOC)) == 0)))
I suggest we just ignore this clause and follow the common case
behavior, which is done in this patch. Rationales to do so:
If --set-section-flags is a no-op (osec->flags == isec->flags)
(corresponds to the "readonly" test in set-section-flags.test), GNU
objcopy will require (Sec.Flags & ELF::SHF_ALLOC). [a] is essentially:
Flags & (SectionFlag::SecContents | SectionFlag::SecLoad)
This special case is not really useful. Non-SHF_ALLOC SHT_NOBITS
sections do not make much sense and it doesn't matter if they are
SHT_NOBITS or SHT_PROGBITS.
For all other RUN lines in set-section-flags.test, the new behavior
matches GNU objcopy, i.e. this patch improves compatibility.
Differential Revision: https://reviews.llvm.org/D60189
llvm-svn: 359639
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=41371.
Currently, it is possible to break the sh_link field of the dynamic relocation section
by removing the section it refers to. The patch fixes an issue and adds 2 test cases.
One of them shows that it does not seem possible to break the sh_info field.
I added an assert to verify this.
Differential revision: https://reviews.llvm.org/D60825
llvm-svn: 359552
Summary:
llvm-{objcopy,strip} (and many other LLVM binary utilities) accept
cl::opt style -long-option as well as many short options (e.g. -p -S
-x). People who use them as replacement of GNU binutils often use the
grouped option syntax (POSIX Utility Conventions), e.g. -Sx => -S -x,
-Wd => -W -d, -sj.text => -s -j.text
There is ambiguity if a long option starts with the character used by a
short option. Drop the support for -long-option to resolve the ambiguity.
This divergence from other utilities is accepted (other utilities
continue supporting -long-option).
https://lists.llvm.org/pipermail/llvm-dev/2019-April/131786.html
Reviewers: alexshap, jakehehrlich, jhenderson, rupprecht, espindola
Reviewed By: jakehehrlich, jhenderson, rupprecht
Subscribers: grimar, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60439
llvm-svn: 359265
llvm-objcopy currently emits an error if a section to be removed is
referenced by another section. This is a reasonable thing to do, but is
different to GNU objcopy. We should allow users who know what they are
doing to have a way to produce the invalid ELF. This change adds a new
switch --allow-broken-links to both llvm-strip and llvm-objcopy to do
precisely that. The corresponding sh_link field is then set to 0 instead
of an error being emitted.
I cannot use llvm-readelf/readobj to test the link fields because they
emit an error if any sections, like the .dynsym, cannot be properly
loaded.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D60324
llvm-svn: 358649
Summary:
This change takes the full list of bfd targets that lld supports (see `ScriptParser.cpp`), including generic handling for `*-freebsd` targets (which uses the same settings but with a FreeBSD OSABI). In particular this adds mips support for `--output-target` (but not yet via `--binary-architecture`).
lld and llvm-objcopy use their own different custom data structures, so I'd prefer to check this in as-is (add support directly in llvm-objcopy, including all the test coverage) and do a separate NFC patch(s) that consolidate the two by putting this mapping into libobject.
See [[ https://bugs.llvm.org/show_bug.cgi?id=41462 | PR41462 ]].
Reviewers: jhenderson, jakehehrlich, espindola, alexshap, arichardson
Reviewed By: arichardson
Subscribers: fedor.sergeev, emaste, sdardis, krytarowski, atanasyan, llvm-commits, MaskRay, arichardson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60773
llvm-svn: 358562
Currently, YAML has the following syntax for describing the symbols:
Symbols:
Local:
LocalSymbol1:
...
LocalSymbol2:
...
...
Global:
GlobalSymbol1:
...
Weak:
...
GNUUnique:
I.e. symbols are grouped by their bindings. That is not very convenient,
because:
It does not allow to set a custom binding, what can be useful for producing
broken/special outputs for test cases. Adding a new binding would require to
change a syntax (what we observed when added GNUUnique recently).
It does not allow to change the order of the symbols in .symtab/.dynsym,
i.e. currently all Local symbols are placed first, then Global, Weak and GNUUnique
are following, but we are not able to change the order.
It is not consistent. Binding is just one of the properties of the symbol,
we do not group them by other properties.
It makes the code more complex that it can be. This patch shows it can be simplified
with the change performed.
The patch changes the syntax to just:
Symbols:
Symbol1:
...
Symbol2:
...
...
With that, we are able to work with the binding field just like with any other symbol property.
Differential revision: https://reviews.llvm.org/D60122
llvm-svn: 357595
Summary:
Some flags accepted by --set-section-flags and --rename-section can change a SHT_NOBITS section to a SHT_PROGBITS section. Note that none of them can change a SHT_PROGBITS to SHT_NOBITS.
The full list (found via experimentation of individually setting each flag) that does this is: contents, load, noload, code, data, rom, and debug.
This was found by testing llvm-objcopy with the gnu binutils test suite, specifically this test case: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob;f=binutils/testsuite/binutils-all/copy-1.d;h=f2b0d9e90df738c2891b4d5c7b62f62894b556ca;hb=HEAD
Reviewers: jhenderson, grimar, jakehehrlich, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59958
llvm-svn: 357492
George Rimar