arch incompat with spec in file so it's rejected and the test fails.
will look into this later, will be a test case issue not a test issue;
test case may only be valid when lldb is built for/running on an x86_64
system.
llvm-svn: 324795
Constructors of simple variables now can be queried to discover that they're
constructing into simple variables.
Differential Revision: https://reviews.llvm.org/D42699
llvm-svn: 324794
This expression may or may not be evaluated in compile time, so tracking the
result symbol is of potential interest. However, run-time offsetof is not yet
supported by the analyzer, so for now this callback is only there to assist
future implementation.
Patch by Henry Wong!
Differential Revision: https://reviews.llvm.org/D42300
llvm-svn: 324790
This builtin is evaluated in compile time. But in the analyzer we don't yet
automagically evaluate all calls that can be evaluated in compile time.
Patch by Felix Kostenzer!
Differential Revision: https://reviews.llvm.org/D42745
llvm-svn: 324789
Currently, each LLVM timer can be only printed once, as the act of
printing clears the timer.
Moreover, the current printing mechanism implicitly assumes that the
timer is stopped -- and prints zero otherwise.
This patch relaxes this assumption and makes printing statistics
multiple time a possibility.
Differential Revision: https://reviews.llvm.org/D43136
llvm-svn: 324788
One test uses diff, the other tries to change the PATH which doesn't
seem to work well ('not' is no longer accessible/found after the PATH is
changed - I think $PATH isn't expanded when setting PATH).
llvm-svn: 324787
Summary:
If -pass-remarks=loop-vectorize, atomic ops will be seen by
analyzeInterleaving(), even though canVectorizeMemory() == false. This
is because we are requesting extra analysis instead of bailing out.
In such a case, we end up with a Group in both Load- and StoreGroups,
and then we'll try to access freed memory when traversing LoadGroups after having had released the Group when iterating over StoreGroups.
The fix is to include mayWriteToMemory() when validating that two
instructions are the same kind of memory operation.
Reviewers: mssimpso, davidxl
Reviewed By: davidxl
Subscribers: hsaito, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D43064
llvm-svn: 324786
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
Hexagon LoopIdiom pass to cease using the old IRBuilder createMemCpy/createMemMove
single-alignment APIs in favour of the new API that allows setting source and
destination alignments independently.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324784
If the output file is not specified make the modifications in-place
(like binutils objcopy does). In particular, this fixes
the behavior of Clang -gsplit-dwarf (if Clang is configured to use llvm-objcopy),
previously it was creating .dwo files, but still leaving *dwo* sections in
the original binary.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D42873
llvm-svn: 324783
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes
ARMFastISel to cease using the old getAlignment() API of MemoryIntrinsic in favour of getting
source & dest specific alignments through the new API.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324781
The code for going up the macro arg expansion is duplicated in many
places (and we need it for the analyzer as well, so I did not want to
duplicate it two more times).
This patch is an NFC, so the semantics should remain the same.
Differential Revision: https://reviews.llvm.org/D42458
llvm-svn: 324780
This adds a wasm-import-module function attribute and a .import_module
assembler directive, for specifying module import names for WebAssembly.
Currently these may only be used for function symbols; global variables
may be considered in the future.
WebAssembly has a two-level namespace scheme for symbols, and it's
normally the linker's job to assign the module name, which is the
first-level name. The attributes here allow users to specify their
own module names explicitly, which is useful for tools generating
bindings to modules defined in other languages.
This feature is not fully usable yet. It will evolve along with the
ongoing symbol table and lld changes.
Differential Revision: https://reviews.llvm.org/D42520
llvm-svn: 324778
Summary:
This change avoids the overhead of storing, and later crawling,
an initializer list of all zeros for arrays. When LLVM
visits this (llvm/IR/Constants.cpp) ConstantArray::getImpl()
it will scan the list looking for an array of all zero.
We can avoid the store, and short-cut the scan, by detecting
all zeros when clang builds-up the initialization representation.
This was brought to my attention when investigating PR36030
Reviewers: majnemer, rjmccall
Reviewed By: rjmccall
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D42549
llvm-svn: 324776
This patch makes LLDB's clang module cache path customizable via
settings set target.clang-modules-cache-path <path> and uses it in the
LLDB testsuite to reuse the same location inside the build directory
for LLDB and clang.
Differential Revision: https://reviews.llvm.org/D43099
llvm-svn: 324775
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
AMDGPUPromoteAlloca pass to cease using:
1) The old getAlignment() API of MemoryIntrinsic in favour of getting source & dest specific
alignments through the new API.
2) The old IRBuilder createMemCpy/createMemMove single-alignment APIs in favour of the new
API that allows setting source and destination alignments independently.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, r323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324774
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes
AArch64FastISel to cease using the old getAlignment() API of MemoryIntrinsic in favour of getting
source & dest specific alignments through the new API.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, r323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324773
In the rare case where the input contains rip-relative addressing with
immediate displacements, *and* the instruction ends with an immediate,
we encode the instruction in the wrong way:
movl $12345678, 0x400(%rdi) // all good, no rip-relative addr
movl %eax, 0x400(%rip) // all good, no immediate at the end of the instruction
movl $12345678, 0x400(%rip) // fails, encodes address as 0x3fc(%rip)
Offset is a label:
movl $12345678, foo(%rip)
we want to account for the size of the immediate (in this case,
$12345678, 4 bytes).
Offset is an immediate:
movl $12345678, 0x400(%rip)
we should not account for the size of the immediate, assuming the
immediate offset is what the user wanted.
Differential Revision: https://reviews.llvm.org/D43050
llvm-svn: 324772
Summary:
Since the lifetime markers are metadata instructions, they should probably be treated as such by the isMetaInstruction predicate.
There was no issue that provoked this change, I just ran across it while investigating another issue.
Reviewers: aprantl, MatzeB
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43111
llvm-svn: 324771
Peviously we were reporting undefined symbol as being defined
by the IMPORT sections.
This change reports undefined symbols in the same that other
formats do, and also removes the need to store the section
with each symbol (since it can be derived from the symbol
type).
Differential Revision: https://reviews.llvm.org/D43101
llvm-svn: 324770
from the value stored in swift_version bits in the flags field in the
objc_image_info struct. ABI version 3 thru 6 were previously added but this
code was not updated to print the Swift version.
rdar://35624067
llvm-svn: 324767
Extend salvageDebugInfo to preserve the debug info from a dead 'or'
with a constant.
Patch by Ismail Badawi!
Differential Revision: https://reviews.llvm.org/D43129
llvm-svn: 324764
LLDB creates Clang modules and had an incomplete copy of the clang
Driver code that compute the -fmodule-cache-path. This patch makes the
clang driver code accessible to LLDB.
Differential Revision: https://reviews.llvm.org/D43128
llvm-svn: 324761
Before it was declared at a struct, which differs from
DominatorTree. Make it a class so both can be declared
the same way without hitting the warning about mismatched
struct vs. class declarations.
llvm-svn: 324760
* !foreach on lists didn't evaluate operands of the RHS operator.
This made nested operators silently fail.
* A typo in the code could result in a wrong value substituted
for an operation which produced a false '!foreach requires an operator' error.
* Keep recursion over the DAG within ForeachHelper. This simplifies
things a bit as we no longer need to pass the Type around in order
to prevent recursion.
Differential Revision: https://reviews.llvm.org/D43083
llvm-svn: 324758
Summary:
For symbols that has linkonce_odr linkage and unnamed_addr, it can be
auto hide by linker to avoid weak external symbols. Teach ThinLTO to
perform auto hide so it can safely promote linkonce_odr to weak symbols
without breaking this nice property.
Reviewers: tejohnson, mehdi_amini
Reviewed By: tejohnson
Subscribers: inglorion, eraman, rnk, pcc, llvm-commits
Differential Revision: https://reviews.llvm.org/D43130
llvm-svn: 324757
GNU gold doesn't print out ICF sections for -verbose. It only shows
them for -print-icf-sections. We printed out them for -verbose because
we didn't have -print-icf-sections. Now that we have the option, there's
no reason to print out for -verbose.
Differential Revision: https://reviews.llvm.org/D43100
llvm-svn: 324755
This is for compatiblity with GNU gold. GNU gold tries to resolve
symbols specified by --export-dynamic-symbol. So, if a symbol specified
by --export-dynamic-symbol is in an archive file, lld's result is
currently different from gold's.
Interestingly, that behavior is different for --dynamic-list.
I added a new test to ensure that.
Differential Revision: https://reviews.llvm.org/D43103
llvm-svn: 324752
* Use uleb128 for code offsets in the LSDA call site table.
* Omit the TTBase offset if the type table is empty.
This change can reduce the size of the DWARF/Itanium LSDA by about half.
Patch by Ryan Prichard!
llvm-svn: 324750
Rely on the assembler to finalize the layout of the DWARF/Itanium
exception-handling LSDA. Rather than calculate the exact size of each
thing in the LSDA, use assembler directives:
To emit the offset to the TTBase label:
.uleb128 .Lttbase0-.Lttbaseref0
.Lttbaseref0:
To emit the size of the call site table:
.uleb128 .Lcst_end0-.Lcst_begin0
.Lcst_begin0:
... call site table entries ...
.Lcst_end0:
To align the type info table:
... action table ...
.balign 4
.long _ZTIi
.long _ZTIl
.Lttbase0:
Using assembler directives simplifies the compiler and allows switching
the encoding of offsets in the call site table from udata4 to uleb128 for
a large code size savings. (This commit does not change the encoding.)
The combination of the uleb128 followed by a balign creates an unfortunate
dependency cycle that the assembler must sometimes resolve either by
padding an LEB or by inserting zero padding before the type table. See
PR35809 or GNU as bug 4029.
Patch by Ryan Prichard!
llvm-svn: 324749
Jason Molenda