Summary:
The ModuleList stream consists of an integer giving the number of
entries in the list, followed by the list itself. Each entry in the list
describes a module (dynamically loaded objects which were loaded in the
process when it crashed (or when the minidump was generated).
The code for reading the list is relatively straight-forward, with a
single gotcha. Some minidump writers are emitting padding after the
"count" field in order to align the subsequent list on 8 byte boundary
(this depends on how their ModuleList type was defined and the native
alignment of various types on their platform). Fortunately, the minidump
format contains enough redundancy (in the form of the stream length
field in the stream directory), which allows us to detect this situation
and correct it.
This patch just adds the ability to parse the stream. Code for
conversion to/from yaml will come in a follow-up patch.
Reviewers: zturner, amccarth, jhenderson, clayborg
Subscribers: jdoerfert, markmentovai, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60121
llvm-svn: 357897
This extends D59959 to unionWith(), allowing to specify that a
non-wrapping unsigned/signed range is preferred. This is somewhat
less useful than the intersect case, because union operations are
rarer. An example use would the the phi union computed in SCEV.
The implementation is mostly a straightforward use of getPreferredRange(),
but I also had to adjust some <=/< checks to make sure that no ranges with
lower==upper get constructed before they're passed to getPreferredRange(),
as these have additional constraints.
Differential Revision: https://reviews.llvm.org/D60377
llvm-svn: 357876
The intersection of two ConstantRanges may consist of two disjoint
ranges. As we can only return one range as the result, we need to
return one of the two possible ranges that cover both. Currently the
result is picked based on set size. However, this is not always
optimal: If we're in an unsigned context, we'd prefer to get a large
unsigned range over a small signed range -- the latter effectively
becomes a full set in the unsigned domain.
This revision adds a PreferredRangeType, which can be either Smallest,
Unsigned or Signed. Smallest is the current behavior and Unsigned and
Signed are new variants that prefer not to wrap the unsigned/signed
domain. The new type isn't used anywhere yet (but SCEV will be a good
first user, see D60035).
I've also added some comments to illustrate the various cases in
intersectWith(), which should hopefully make it more obvious what is
going on.
Differential Revision: https://reviews.llvm.org/D59959
llvm-svn: 357873
Add isAllNegative() and isAllNonNegative() methods to ConstantRange,
which determine whether all values in the constant range are
negative/non-negative.
This is useful for replacing KnownBits isNegative() and isNonNegative()
calls when changing code to use constant ranges.
Differential Revision: https://reviews.llvm.org/D60264
llvm-svn: 357871
if we do SHL of two 16-bit ranges like [0, 30000) with [1,2) we get
"full-set" instead of what I would have expected [0, 60000) which is
still in the 16-bit unsigned range.
This patch changes the SHL algorithm to allow getting a usable range
even in this case.
Differential Revision: https://reviews.llvm.org/D57983
llvm-svn: 357854
Summary:
Reorder the condition code enum to match their encodings. Move it to MC layer so it can be used by the scheduler models.
This avoids needing an isel pattern for each condition code. And it removes
translation switches for converting between CMOV instructions and condition
codes.
Now the printer, encoder and disassembler take care of converting the immediate.
We use InstAliases to handle the assembly matching. But we print using the
asm string in the instruction definition. The instruction itself is marked
IsCodeGenOnly=1 to hide it from the assembly parser.
This does complicate the scheduler models a little since we can't assign the
A and BE instructions to a separate class now.
I plan to make similar changes for SETcc and Jcc.
Reviewers: RKSimon, spatel, lebedev.ri, andreadb, courbet
Reviewed By: RKSimon
Subscribers: gchatelet, hiraditya, kristina, lebedev.ri, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60041
llvm-svn: 357800
Summary:
Add new ``isa_and_nonnull<>`` operator that works just like
the ``isa<>`` operator, except that it allows for a null pointer as an
argument (which it then returns false).
Reviewers: lattner, aaron.ballman, greened
Reviewed By: lattner
Subscribers: hubert.reinterpretcast, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60291
llvm-svn: 357761
Summary:
Strings in minidump files are stored as a 32-bit length field, giving
the length of the string in *bytes*, which is followed by the
appropriate number of UTF16 code units. The string is also supposed to
be null-terminated, and the null-terminator is not a part of the length
field. This patch:
- adds support for reading these strings out of the minidump file (this
implementation does not depend on proper null-termination)
- adds support for writing them to a minidump file
- using the previous two pieces implements proper (de)serialization of
the CSDVersion field of the SystemInfo stream. Previously, this was
only read/written as hex, and no attempt was made to access the
referenced string -- now this string is read and written correctly.
The changes are tested via yaml2obj|obj2yaml round-trip as well as a
unit test which checks the corner cases of the string deserialization
logic.
Reviewers: jhenderson, zturner, clayborg
Subscribers: llvm-commits, aprantl, markmentovai, amccarth, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59775
llvm-svn: 357749
A block reachable from the entry block can't have any route to a block that's not reachable from the entry block (if it did, that route would make it reachable from the entry block). That is the intended performance optimization for isPotentiallyReachable. For the case where we ask whether an unreachable from entry block has a route to a reachable from entry block, we can't conclude one way or the other. Fix a bug where we claimed there could be no such route.
The fix in rL357425 ironically reintroduced the very bug it was fixing but only when a DominatorTree is provided. This fixes the remaining bug.
llvm-svn: 357734
Summary: This changes the Architecture enum to use a prefix (AK_) to prevent the
preprocessor from replacing i386 with 1 when building llvm/clang for i386.
Reviewers: steven_wu, lhames, mstorsjo
Reviewed By: mstorsjo
Subscribers: hiraditya, jkorous, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60241
llvm-svn: 357733
Summary:
Now CVType and CVSymbol are effectively type-safe wrappers around
ArrayRef<uint8_t>. Make the kind() accessor load it from the
RecordPrefix, which is the same for types and symbols.
Reviewers: zturner, aganea
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60018
llvm-svn: 357658
Summary:
On AIX, we can determine whether a filesystem is remote using `mntctl`.
If the information is not found, then claim that the file is remote
(since that is the more restrictive case). Testing for the associated
interface is restored with a modified version of the unit test from
rL295768.
Reviewers: jasonliu, xingxue
Reviewed By: xingxue
Subscribers: jsji, apaprocki, Hahnfeld, zturner, krytarowski, kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58801
llvm-svn: 357333
Summary:
`ResolvedSchedClass` will need to be used outside of `Analysis`
(before `InstructionBenchmarkClustering` even), therefore promote
it into a non-private top-level class, and while there also
move all of the functions that are only called by `ResolvedSchedClass`
into that same new file.
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: mgorny, tschuett, mgrang, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59993
llvm-svn: 357259
This patch has three related fixes to improve float literal lexing:
1. Make AsmLexer::LexDigit handle floats without a decimal point more
consistently.
2. Make AsmLexer::LexFloatLiteral print an error for floats which are
apparently missing an "e".
3. Make APFloat::convertFromString use binutils-compatible exponent
parsing.
Together, this fixes some cases where a float would be incorrectly
rejected, fixes some cases where the compiler would crash, and improves
diagnostics in some cases.
Patch by Brandon Jones.
Differential Revision: https://reviews.llvm.org/D57321
llvm-svn: 357214
Summary:
This is an alternative to D59539.
Let's suppose we have measured 4 different opcodes, and got: `0.5`, `1.0`, `1.5`, `2.0`.
Let's suppose we are using `-analysis-clustering-epsilon=0.5`.
By default now we will start processing the `0.5` point, find that `1.0` is it's neighbor, add them to a new cluster.
Then we will notice that `1.5` is a neighbor of `1.0` and add it to that same cluster.
Then we will notice that `2.0` is a neighbor of `1.5` and add it to that same cluster.
So all these points ended up in the same cluster.
This may or may not be a correct implementation of dbscan clustering algorithm.
But this is rather horribly broken for the reasons of comparing the clusters with the LLVM sched data.
Let's suppose all those opcodes are currently in the same sched cluster.
If i specify `-analysis-inconsistency-epsilon=0.5`, then no matter
the LLVM values this cluster will **never** match the LLVM values,
and thus this cluster will **always** be displayed as inconsistent.
The solution is obviously to split off some of these opcodes into different sched cluster.
But how do i do that? Out of 4 opcodes displayed in the inconsistency report,
which ones are the "bad ones"? Which ones are the most different from the checked-in data?
I'd need to go in to the `.yaml` and look it up manually.
The trivial solution is to, when creating clusters, don't use the full dbscan algorithm,
but instead "pick some unclustered point, pick all unclustered points that are it's neighbor,
put them all into a new cluster, repeat". And just so as it happens, we can arrive
at that algorithm by not performing the "add neighbors of a neighbor to the cluster" step.
But that won't work well once we teach analyze mode to operate in on-1D mode
(i.e. on more than a single measurement type at a time), because the clustering would
depend on the order of the measurements.
Instead, let's just create a single cluster per opcode, and put all the points of that opcode into said cluster.
And simultaneously check that every point in that cluster is a neighbor of every other point in the cluster,
and if they are not, the cluster (==opcode) is unstable.
This is //yet another// step to bring me closer to being able to continue cleanup of bdver2 sched model..
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=40880 | PR40880 ]].
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: tschuett, jdoerfert, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59820
llvm-svn: 357152
The issue here is that we actually allow CGSCC passes to mutate IR (and
therefore invalidate analyses) outside of the current SCC. At a minimum,
we need to support mutating parent and ancestor SCCs to support the
ArgumentPromotion pass which rewrites all calls to a function.
However, the analysis invalidation infrastructure is heavily based
around not needing to invalidate the same IR-unit at multiple levels.
With Loop passes for example, they don't invalidate other Loops. So we
need to customize how we handle CGSCC invalidation. Doing this without
gratuitously re-running analyses is even harder. I've avoided most of
these by using an out-of-band preserved set to accumulate the cross-SCC
invalidation, but it still isn't perfect in the case of re-visiting the
same SCC repeatedly *but* it coming off the worklist. Unclear how
important this use case really is, but I wanted to call it out.
Another wrinkle is that in order for this to successfully propagate to
function analyses, we have to make sure we have a proxy from the SCC to
the Function level. That requires pre-creating the necessary proxy.
The motivating test case now works cleanly and is added for
ArgumentPromotion.
Thanks for the review from Philip and Wei!
Differential Revision: https://reviews.llvm.org/D59869
llvm-svn: 357137
Add a test that checks the intersectWith() implementation against
all 4-bit range pairs. The test uses a more explicit way of
calculating the possible intersections, and checks that the right
one is picked out according to the smallest set heuristic.
This is in preparation for introducing intersectWith() variants that
use different heuristics to pick an intersection range, if there are
multiple possibilities.
llvm-svn: 357119
Split off from D59749. This adds isWrappedSet() and
isUpperSignWrapped() set with the same behavior as isSignWrappedSet()
and isUpperWrapped() for the respectively other domain.
The methods isWrappedSet() and isSignWrappedSet() will not consider
ranges of the form [X, Max] == [X, 0) and [X, SignedMax] == [X, SignedMin)
to be wrapping, while isUpperWrapped() and isUpperSignWrapped() will.
Also replace the checks in getUnsignedMin() and friends with method
calls that implement the same logic.
llvm-svn: 357112
Split out from D59749. The current implementation of isWrappedSet()
doesn't do what it says on the tin, and treats ranges like
[X, Max] as wrapping, because they are represented as [X, 0) when
using half-inclusive ranges. This also makes it inconsistent with
the semantics of isSignWrappedSet().
This patch renames isWrappedSet() to isUpperWrapped(), in preparation
for the introduction of a new isWrappedSet() method with corrected
behavior.
llvm-svn: 357107
Split off from D59749. This uses a simpler and more efficient
implementation of isSignWrappedSet(), and considers full sets
as non-wrapped, to be consistent with isWrappedSet(). Otherwise
the behavior is unchanged.
There are currently only two users of this function and both already
check for isFullSet() || isSignWrappedSet(), so this is not going to
cause a change in overall behavior.
Differential Revision: https://reviews.llvm.org/D59848
llvm-svn: 357039
Summary:
This prevents "Cannot encode high byte register in REX-prefixed instruction"
from happening on instructions that require REX encoding when AH & co
get selected.
On the down side, these 4 registers can no longer be selected
automatically, but this avoids having to expose all the X86 encoding
complexity.
Reviewers: gchatelet
Subscribers: tschuett, jdoerfert, llvm-commits, bdb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59821
llvm-svn: 357003
rL356312 changed the return type of emplace_back from void to reference.
Update the tests to check the behavior.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59809
llvm-svn: 356980
This adds ConstantRange::getFull(BitWidth) and
ConstantRange::getEmpty(BitWidth) named constructors as more readable
alternatives to the current ConstantRange(BitWidth, /* full */ false)
and similar. Additionally private getFull() and getEmpty() member
functions are added which return a full/empty range with the same bit
width -- these are commonly needed inside ConstantRange.cpp.
The IsFullSet argument in the ConstantRange(BitWidth, IsFullSet)
constructor is now mandatory for the few usages that still make use of it.
Differential Revision: https://reviews.llvm.org/D59716
llvm-svn: 356852
As a followup to newpm -time-passes fix (D59366), now adding a similar
functionality to legacy time-passes.
Enhancing llvm::reportAndResetTimings to accept an optional stream
for reporting output. By default it still reports into the stream created
by CreateInfoOutputFile (-info-output-file).
Also fixing to actually reset after printing as declared.
Reviewed By: philip.pfaffe
Differential Revision: https://reviews.llvm.org/D59416
llvm-svn: 356824
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
Update: This contains changes to fix issues discovered by the bots:
- add parentheses to silence warnings.
- rename variables
- use PlatformType from BinaryFormat
- Trying if switching from a vector to an array will appeas the bots.
- Replace the tuple with a struct to work around an explicit constructor bug.
- This fixes an issue where we were leaking the YAML document if there was a
parsing error.
Updated the license information in all files.
llvm-svn: 356820
Summary:
Adding contained caching to AliasAnalysis. BasicAA is currently the only one using it.
AA changes:
- This patch is pulling the caches from BasicAAResults to AAResults, meaning the getModRefInfo call benefits from the IsCapturedCache as well when in "batch mode".
- All AAResultBase implementations add the QueryInfo member to all APIs. AAResults APIs maintain wrapper APIs such that all alias()/getModRefInfo call sites are unchanged.
- AA now provides a BatchAAResults type as a wrapper to AAResults. It keeps the AAResults instance and a QueryInfo instantiated to batch mode. It delegates all work to the AAResults instance with the batched QueryInfo. More API wrappers may be needed in BatchAAResults; only the minimum needed is currently added.
MemorySSA changes:
- All walkers are now templated on the AA used (AliasAnalysis=AAResults or BatchAAResults).
- At build time, we optimize uses; now we create a local walker (lives only as long as OptimizeUses does) using BatchAAResults.
- All Walkers have an internal AA and only use that now, never the AA in MemorySSA. The Walkers receive the AA they will use when built.
- The walker we use for queries after the build is instantiated on AliasAnalysis and is built after building MemorySSA and setting AA.
- All static methods doing walking are now templated on AliasAnalysisType if they are used both during build and after. If used only during build, the method now only takes a BatchAAResults. If used only after build, the method now takes an AliasAnalysis.
Subscribers: sanjoy, arsenm, jvesely, nhaehnle, jlebar, george.burgess.iv, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59315
llvm-svn: 356783
Summary:
This patch adds the ability to read a yaml form of a minidump file and
write it out as binary. Apart from the minidump header and the stream
directory, only three basic stream kinds are supported:
- Text: This kind is used for streams which contain textual data. This
is typically the contents of a /proc file on linux (e.g.
/proc/PID/maps). In this case, we just put the raw stream contents
into the yaml.
- SystemInfo: This stream contains various bits of information about the
host system in binary form. We expose the data in a structured form.
- Raw: This kind is used as a fallback when we don't have any special
knowledge about the stream. In this case, we just print the stream
contents in hex.
For this code to be really useful, more stream kinds will need to be
added (particularly for things like lists of memory regions and loaded
modules). However, these can be added incrementally.
Reviewers: jhenderson, zturner, clayborg, aprantl
Subscribers: mgorny, lemo, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59482
llvm-svn: 356753
Summary: To show that dbscan is insensitive to the order of the points.
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59693
llvm-svn: 356747
The first problem was a use-after-free in the tests (detected by asan
bots). The temporary array created for the "create" call is guaranteed
to live only until the end of the statement. The fix there is to store
the test data in a local variable to ensure it has the right lifetime
The second issue is broken BUILD_SHARED_LIBS build, which I fix by
adding the appropriate BinaryFormat dependency to the Object unit tests.
llvm-svn: 356655
Summary:
This patch adds basic support for reading minidump files. It contains
the definitions of various important minidump data structures (header,
stream directory), and of one minidump stream (SystemInfo). The ability
to read other streams will be added in follow-up patches. However, all
streams can be read even now as raw data, which means lldb's minidump
support (where this code is taken from) can be immediately rebased on
top of this patch as soon as it lands.
As we don't have any support for generating minidump files (yet), this
tests the code via unit tests with some small handcrafted binaries in
the form of c char arrays.
Reviewers: Bigcheese, jhenderson, zturner
Subscribers: srhines, dschuff, mgorny, fedor.sergeev, lemo, clayborg, JDevlieghere, aprantl, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59291
llvm-svn: 356652
This adds a Remark class that allows us to share code when working with
remarks.
The C API has been updated to reflect this. Instead of the parser
generating C structs, it's now using a C++ object that is used through
opaque pointers in C. This gives us much more flexibility on what
changes we can make to the internal state of the object and interacts
much better with scenarios where the library is used through dlopen.
* C API updates:
* move from C structs to opaque pointers and functions
* the remark type is now an enum instead of a string
* unit tests updates:
* use mostly the C++ API
* keep one test for the C API
* rename to YAMLRemarksParsingTest
* a typo was fixed: AnalysisFPCompute -> AnalysisFPCommute.
* a new error message was added: "expected a remark tag."
* llvm-opt-report has been updated to use the C++ parser instead of the
C API
Differential Revision: https://reviews.llvm.org/D59049
Original llvm-svn: 356491
llvm-svn: 356519
This adds a Remark class that allows us to share code when working with
remarks.
The C API has been updated to reflect this. Instead of the parser
generating C structs, it's now using a C++ object that is used through
opaque pointers in C. This gives us much more flexibility on what
changes we can make to the internal state of the object and interacts
much better with scenarios where the library is used through dlopen.
* C API updates:
* move from C structs to opaque pointers and functions
* the remark type is now an enum instead of a string
* unit tests updates:
* use mostly the C++ API
* keep one test for the C API
* rename to YAMLRemarksParsingTest
* a typo was fixed: AnalysisFPCompute -> AnalysisFPCommute.
* a new error message was added: "expected a remark tag."
* llvm-opt-report has been updated to use the C++ parser instead of the
C API
Differential Revision: https://reviews.llvm.org/D59049
llvm-svn: 356491
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356451
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356442
Following the suggestion in D59450, I'm moving the code for constructing
a ConstantRange from KnownBits out of ValueTracking, which also allows us
to test this code independently.
I'm adding this method to ConstantRange rather than KnownBits (which
would have been a bit nicer API wise) to avoid creating a dependency
from Support to IR, where ConstantRange lives.
Differential Revision: https://reviews.llvm.org/D59475
llvm-svn: 356339
TimePassesHandler object (implementation of time-passes for new pass manager)
gains ability to report into a stream customizable per-instance (per pipeline).
Intended use is to specify separate time-passes output stream per each compilation,
setting up TimePasses member of StandardInstrumentation during PassBuilder setup.
That allows to get independent non-overlapping pass-times reports for parallel
independent compilations (in JIT-like setups).
By default it still puts timing reports into the info-output-file stream
(created by CreateInfoOutputFile every time report is requested).
Unit-test added for non-default case, and it also allowed to discover that print() does not work
as declared - it did not reset the timers, leading to yet another report being printed into the default stream.
Fixed print() to actually reset timers according to what was declared in print's comments before.
Reviewed By: philip.pfaffe
Differential Revision: https://reviews.llvm.org/D59366
llvm-svn: 356305
Add functions to ConstantRange that determine whether the
unsigned/signed addition/subtraction of two ConstantRanges
may/always/never overflows. This will allow checking overflow
conditions based on known constant ranges in addition to known bits.
I'm implementing these methods on ConstantRange to allow them to be
unit tested independently of any ValueTracking machinery. The tests
include exhaustive testing on 4-bit ranges, to make sure the result
is both conservatively correct and maximally precise.
The OverflowResult enum is redeclared on ConstantRange, because
I wanted to avoid a dependency in either direction between
ValueTracking.h and ConstantRange.h.
Differential Revision: https://reviews.llvm.org/D59193
llvm-svn: 356276
Summary:
Now that endian types support enumerations (D59141), the existing yaml
support for them is somewhat insufficient. The current solution was to
define the ScalarTraits class for these types, which always forwards to
the ScalarTraits of the underlying type. However, the enum types will
usually have ScalarEnumerationTraits of ScalarBitsetTraits.
In this patch I add the two extra Traits types to the endian types. In
order to properly SFINAE-ize them, I've also added an extra "Enable"
template argument to the Traits template classes.
Reviewers: zturner, sammccall
Subscribers: kristina, Bigcheese, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59289
llvm-svn: 356269
Windows command line argument processing treats consecutive double quotes
as a single double-quote. This patch implements this functionality.
Differential Revision: https://reviews.llvm.org/D58662
llvm-svn: 356193
Summary:
The way c++ template argument deduction works, both arguments are used
to deduce the template type in the three-argument overload of
mapOptional. This is a problem if the types are slightly different, even
if they are implicitly convertible. This is fairly easy to trigger with
integral types, as the default type of most integral constants is int,
which then requires casting the constant to the type of the other
argument.
This patch fixes that by using a separate template type for the default
value, which is then cast to the type of the first argument. To avoid
this conversion triggerring conversions marged as explicit, we use
static_assert to check that the types are implicitly convertible.
Reviewers: zturner, sammccall
Subscribers: kristina, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59142
llvm-svn: 356157
Summary:
Add hooks for determining the policy used to decide whether/how
to chop off symbol 'suffixes' when locating a given function
in a sample profile.
Prior to this change, any function symbols of the form "X.Y" were
elided/truncated into just "X" when looking up things in a sample
profile data file.
With this change, the policy on suffixes can be changed by adding a
new attribute "sample-profile-suffix-elision-policy" to the function:
this attribute can have the value "all" (the default), "selected", or
"none". A value of "all" preserves the previous behavior (chop off
everything after the first "." character, then treat that as the
symbol name). A value of "selected" chops off only the rightmost
".llvm.XXXX" suffix (where "XXX" is any string not containing a "."
char). A value of "none" indicates that names should be left as is.
Subscribers: jdoerfert, wmi, mtrofin, danielcdh, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58832
llvm-svn: 356146
Summary:
MsgPackTypes has been replaced by the lighter-weight MsgPackDocument.
Differential Revision: https://reviews.llvm.org/D57025
Change-Id: Ia7069880ef29f55490abbe5d8ae15f25cc1490a4
llvm-svn: 356082
Summary:
A class that exposes a simple in-memory representation of a document of
MsgPack objects, that can be read from and written to MsgPack, read from
and written to YAML, and inspected and modified in memory. This is
intended to be a lighter-weight (in terms of memory allocations)
replacement for MsgPackTypes.
Two subsequent changes will:
1. switch AMDGPU HSA metadata to using MsgPackDocument instead of
MsgPackTypes;
2. add MsgPack AMDGPU PAL metadata via MsgPackDocument.
Differential Revision: https://reviews.llvm.org/D57023
Change-Id: Ie15a054831d5a6467c5867c064c8f8f6b80270e1
llvm-svn: 356080
Summary:
AIX compilers define macros based on the version of the operating
system.
This patch implements updating of versionless AIX triples to include the
host AIX version. Also, the host triple detection in the build system is
adjusted to strip the AIX version information so that the run-time
detection is preferred.
Reviewers: xingxue, stefanp, nemanjai, jasonliu
Reviewed By: xingxue
Subscribers: mgorny, kristina, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58798
llvm-svn: 355995
This patch adds an XCOFF triple object format type into LLVM.
This XCOFF triple object file type will be used later by object file and assembly generation for the AIX platform.
Differential Revision: https://reviews.llvm.org/D58930
llvm-svn: 355989
Summary:
Extract the functionality of eliminating unreachable basic blocks
within a function, previously encapsulated within the
-unreachableblockelim pass, and make it available as a function within
BlockUtils.h. No functional change intended other than making the logic
reusable.
Exposing this logic makes it easier to implement
https://reviews.llvm.org/D59068, which fixes coroutines bug
https://bugs.llvm.org/show_bug.cgi?id=40979.
Reviewers: mkazantsev, wmi, davidxl, silvas, davide
Reviewed By: davide
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59069
llvm-svn: 355846
Summary:
Binary formats often include various enumerations or bitsets, but using
endian-specific types for accessing them is tricky because they
currently only support integral types. This is particularly true for
scoped enums (enum class), as these are not implicitly convertible to
integral types, and so one has to perform two casts just to read the
enum value.
This fixes that support by adding first-class support for enumeration
types to endian-specific types. The support for them was already almost
working -- all I needed to do was overload getSwappedBytes for
enumeration types (which casts the enum to its underlying type and performs the
conversion there). I also add some convenience template aliases to simplify
declaring endian-specific enums.
Reviewers: Bigcheese, zturner
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59141
llvm-svn: 355812
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355685
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355585
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355522
Getting rid of the name "optimization remarks" for anything that
involves handling remarks on the client side.
It's safer to do this now, before we get stuck with that name in all the
APIs and public interfaces we decide to export to users in the future.
This renames llvm/tools/opt-remarks to llvm/tools/remarks-shlib, and now
generates `libRemarks.dylib` instead of `libOptRemarks.dylib`.
Differential Revision: https://reviews.llvm.org/D58535
llvm-svn: 355439
These arrays are both keyed by CPU name and go into the same tablegenerated file. Merge them so we only need to store keys once.
This also removes a weird space saving quirk where we used the ProcDesc.size() to create to build an ArrayRef for ProcSched.
Differential Revision: https://reviews.llvm.org/D58939
llvm-svn: 355431
We have two sources of known bits:
1. For adds leading ones of either operand are preserved. For sub
leading zeros of LHS and leading ones of RHS become leading zeros in
the result.
2. The saturating math is a select between add/sub and an all-ones/
zero value. As such we can carry out the add/sub known bits
calculation, and only preseve the known one/zero bits respectively.
Differential Revision: https://reviews.llvm.org/D58329
llvm-svn: 355223
This patch allows all forms of values for options to be used at the end
of a group. With the fix, it is possible to follow the way GNU binutils
tools handle grouping options better. For example, the -j option can be
used with objdump in any of the following ways:
$ objdump -d -j .text a.o
$ objdump -d -j.text a.o
$ objdump -dj .text a.o
$ objdump -dj.text a.o
Differential Revision: https://reviews.llvm.org/D58711
llvm-svn: 355185
If an option, which requires a value, has a `cl::Grouping` formatting
modifier, it works well as far as it is used at the end of a group,
or as a separate argument. However, if the option appears accidentally
in the middle of a group, the program just crashes. This patch prints
an error message instead.
Differential Revision: https://reviews.llvm.org/D58499
llvm-svn: 355184
Part 2 of CSPGO changes (mostly related to ProfileSummary).
Note that I use a default parameter in setProfileSummary() and getSummary().
This is to break the dependency in clang. I will make the parameter explicit
after changing clang in a separated patch.
Differential Revision: https://reviews.llvm.org/D54175
llvm-svn: 355131
OptBisect is in IR due to LLVMContext using it. However, it uses IR units from
Analysis as well. This change moves getDescription functions from OptBisect
to their respective IR units. Generating names for IR units will now be up
to the callers, keeping the Analysis IR units in Analysis. To prevent
unnecessary string generation, isEnabled function is added so that callers know
when the description needs to be generated.
Differential Revision: https://reviews.llvm.org/D58406
llvm-svn: 355068
This patch introduces Memory::MF_HUGE_HINT which indicates that allocateMappedMemory() shall return a pointer to a large memory page.
However the flag is a hint because we're not guaranteed in any way that we will get back a large memory page. There are several restrictions:
- Large/huge memory pages aren't enabled by default on modern OSes (Windows 10 and Linux at least), and should be manually enabled/reserved.
- Once enabled, it should be kept in mind that large pages are physical only, they can't be swapped.
- Memory fragmentation can affect the availability of large pages, especially after running the OS for a long time and/or running along many other applications.
Memory::allocateMappedMemory() will fallback to 4KB pages if it can't allocate 2MB large pages (if Memory::MF_HUGE_HINT is provided)
Currently, Memory::MF_HUGE_HINT only works on Windows. The hint will be ignored on Linux, 4KB pages will always be returned.
Differential Revision: https://reviews.llvm.org/D58718
llvm-svn: 355065
Summary:
The original assumption for the insertDef method was that it would not
materialize Defs out of no-where, hence it will not insert phis needed
after inserting a Def.
However, when cloning an instruction (use case used in LICM), we do
materialize Defs "out of no-where". If the block receiving a Def has at
least one other Def, then no processing is needed. If the block just
received its first Def, we must check where Phi placement is needed.
The only new usage of insertDef is in LICM, hence the trigger for the bug.
But the original goal of the method also fails to apply for the move()
method. If we move a Def from the entry point of a diamond to either the
left or right blocks, then the merge block must add a phi.
While this usecase does not currently occur, or may be viewed as an
incorrect transformation, MSSA must behave corectly given the scenario.
Resolves PR40749 and PR40754.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58652
llvm-svn: 355040
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
DWARFFormValues can be created from a data extractor or by passing its
value directly. Until now this was done by member functions that
modified an existing object's internal state. This patch replaces a
subset of these methods with static method that return a new
DWARFFormValue.
llvm-svn: 354941
Summary:
Prior to r310876 one of our out-of-tree targets was enabling IPRA by modifying
the TargetOptions::EnableIPRA. This no longer works on current trunk since the
useIPRA() hook overrides any values that are set in advance. This patch adjusts
the behaviour of the hook so that API users and useIPRA() can both enable it
but useIPRA() cannot disable it if the API user already enabled it.
Reviewers: arsenm
Reviewed By: arsenm
Subscribers: wdng, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D38043
llvm-svn: 354692
Summary:
This patch separates two semantics of `applyUpdates`:
1. User provides an accurate CFG diff and the dominator tree is updated according to the difference of `the number of edge insertions` and `the number of edge deletions` to infer the status of an edge before and after the update.
2. User provides a sequence of hints. Updates mentioned in this sequence might never happened and even duplicated.
Logic changes:
Previously, removing invalid updates is considered a side-effect of deduplication and is not guaranteed to be reliable. To handle the second semantic, `applyUpdates` does validity checking before deduplication, which can cause updates that have already been applied to be submitted again. Then, different calls to `applyUpdates` might cause unintended consequences, for example,
```
DTU(Lazy) and Edge A->B exists.
1. DTU.applyUpdates({{Delete, A, B}, {Insert, A, B}}) // User expects these 2 updates result in a no-op, but {Insert, A, B} is queued
2. Remove A->B
3. DTU.applyUpdates({{Delete, A, B}}) // DTU cancels this update with {Insert, A, B} mentioned above together (Unintended)
```
But by restricting the precondition that updates of an edge need to be strictly ordered as how CFG changes were made, we can infer the initial status of this edge to resolve this issue.
Interface changes:
The second semantic of `applyUpdates` is separated to `applyUpdatesPermissive`.
These changes enable DTU(Lazy) to use the first semantic if needed, which is quite useful in `transforms/utils`.
Reviewers: kuhar, brzycki, dmgreen, grosser
Reviewed By: brzycki
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58170
llvm-svn: 354669
Summary:
Following on from the review for D58088, this patch provides the
prerequisite to_address() implementation that's needed to have
pointer_iterator support unique_ptr.
The late bound return should be removed once we move to C++14 to better
align with the C++20 declaration. Also, this implementation can be removed
once we move to C++20 where it's defined as std::to_addres()
The std::pointer_traits<>::to_address(p) variations of these overloads has
not been implemented.
Reviewers: dblaikie, paquette
Reviewed By: dblaikie
Subscribers: dexonsmith, kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58421
llvm-svn: 354491
This is a follow-up to r354246 and a reimplementation of https://reviews.llvm.org/D57097?id=186600
that should not trigger any UB thanks to the use of an union.
This may still be subject to the problem solved by std::launder, but I'm unsure how it interacts whith union.
/me plans to revert if this triggers any relevant bot failure. At least this validates in Release mode with
clang 6.0.1 and gcc 4.8.5.
llvm-svn: 354264
and
r354055 "Optional specialization for trivially copyable types, part2"
These are suspected to cause Clang to get miscompiled on Ubuntu 14.04
(Trusty) which uses GCC 4.8.4. Reverting for an hour to see if this
helps. See llvm-commits thread.
> Recommit Optional specialization for trivially copyable types
>
> Unfortunately the original code gets misscompiled by GCC (at least 8.1),
> this is a tentative workaround using std::memcpy instead of inplace new
> for trivially copyable types. I'll revert if it breaks.
>
> Original revision: https://reviews.llvm.org/D57097
llvm-svn: 354126
Unfortunately the original code gets misscompiled by GCC (at least 8.1),
this is a tentative workaround using std::memcpy instead of inplace new
for trivially copyable types. I'll revert if it breaks.
Original revision: https://reviews.llvm.org/D57097
llvm-svn: 354051
This reverts commit r351091.
The original mac breakages are addressed by ensuring the root directory
we're working from is fully symlink-resolved before starting.
Differential Revision: https://reviews.llvm.org/D58169
llvm-svn: 354026
Specialization of Optional for trivially copyable types yields failure on the buildbots I fail to reproduce locally.
Better safe than sorry, reverting.
llvm-svn: 353982
Make llvm::Optional<T> trivially copyable when T is trivially copyable
This is an ever-recurring issue (see https://bugs.llvm.org/show_bug.cgi?id=39427 and https://bugs.llvm.org/show_bug.cgi?id=35978)
but I believe that thanks to https://reviews.llvm.org/D54472 we can now ship a decent implementation of this.
Basically the fact that llvm::is_trivially_copyable has a consistent behavior across compilers should prevent any ABI issue,
and using in-place new instead of memcpy should keep compiler bugs away.
This patch is slightly different from the original revision https://reviews.llvm.org/rL353927 but achieves the same goal. It just avoids
going through std::conditional which may the code more explicit.
llvm-svn: 353962
Add plumbing to get MemorySSA in the remaining loop passes.
Also update unit test to add the dependency.
[EnableMSSALoopDependency remains disabled].
llvm-svn: 353901
When CodeExtractor saves the result of InvokeInst at the first insertion
point of the 'normal destination' basic block, this block can be omitted
in the outlined region, so store is placed outside of the function. The
suggested solution is to process saving outputs after creating exit
stubs for new function, and stores will be placed in that blocks before
return in this case.
Patch by Sergei Kachkov!
Fixes llvm.org/PR40455.
Differential Revision: https://reviews.llvm.org/D57919
llvm-svn: 353562
DomTreeUpdater depends on headers from Analysis, but is in IR. This is a
layering violation since Analysis depends on IR. Relocate this code from IR
to Analysis to fix the layering violation.
llvm-svn: 353265
A fallible iterator is one whose increment or decrement operations may fail.
This would usually be supported by replacing the ++ and -- operators with
methods that return error:
class MyFallibleIterator {
public:
// ...
Error inc();
Errro dec();
// ...
};
The downside of this style is that it no longer conforms to the C++ iterator
concept, and can not make use of standard algorithms and features such as
range-based for loops.
The fallible_iterator wrapper takes an iterator written in the style above
and adapts it to (mostly) conform with the C++ iterator concept. It does this
by providing standard ++ and -- operator implementations, returning any errors
generated via a side channel (an Error reference passed into the wrapper at
construction time), and immediately jumping the iterator to a known 'end'
value upon error. It also marks the Error as checked any time an iterator is
compared with a known end value and found to be inequal, allowing early exit
from loops without redundant error checking*.
Usage looks like:
MyFallibleIterator I = ..., E = ...;
Error Err = Error::success();
for (auto &Elem : make_fallible_range(I, E, Err)) {
// Loop body is only entered when safe.
// Early exits from loop body permitted without checking Err.
if (SomeCondition)
return;
}
if (Err)
// Handle error.
* Since failure causes a fallible iterator to jump to end, testing that a
fallible iterator is not an end value implicitly verifies that the error is a
success value, and so is equivalent to an error check.
Reviewers: dblaikie, rupprecht
Subscribers: mgorny, dexonsmith, kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57618
llvm-svn: 353237
Summary:
Add support for options that always prefix their value, giving an error
if the value is in the next argument or if the option is given a value
assignment (ie. opt=val). This is the desired behavior for the -D option
of FileCheck for instance.
Copyright:
- Linaro (changes in version 2 of revision D55940)
- GraphCore (changes in later versions and introduced when creating
D56549)
Reviewers: jdenny
Subscribers: llvm-commits, probinson, kristina, hiraditya,
JonChesterfield
Differential Revision: https://reviews.llvm.org/D56549
llvm-svn: 353172
This fixes two problems with CSE done in buildConstant. First, this
would hit an assert when used with a vector result type. Solve this by
allowing CSE on the vector elements, but not on the result vector for
now.
Second, this was also performing the CSE based on the input
ConstantInt pointer. The underlying buildConstant could potentially
convert the constant depending on the result type, giving in a
different ConstantInt*. Stop allowing the APInt and ConstantInt forms
from automatically casting to the result type to avoid any similar
problems in the future.
llvm-svn: 353077
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r353048 which in turn was a reland of
r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353053
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353048
This cleans up all GetElementPtr creation in LLVM to explicitly pass a
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57173
llvm-svn: 352913
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all InvokeInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57171
llvm-svn: 352910
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
This reverts commit f47d6b38c7 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
llvm-svn: 352800
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352791
In order to make an option value truly optional, both the ValueOptional
and an empty-named value are required. This empty-named value appears in
the command-line help text, which is not ideal.
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
Reviewed by: thopre, ruiu
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 352750
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
Patch https://reviews.llvm.org/D56329 caused build failures for me when
building on Windows because of the use of cmake operator
'VERSION_GREATER_EQUAL' which isn't supported in older versions of cmake. The
llvm website states that minimum required version of cmake for building llvm is
3.4.3 https://llvm.org/docs/CMake.html
Differential Revision: https://reviews.llvm.org/D57326
llvm-svn: 352378
The IR enforced limit for the address space is 24-bits, but LLT was
only using 23-bits. Additionally, the argument to the constructor was
truncating to 16-bits.
A similar problem still exists for the number of vector elements. The
IR enforces no limit, so if you try to use a vector with > 65535
elements the IRTranslator asserts in the LLT constructor.
llvm-svn: 352264
Summary:
Renamed setBaseDiscriminator to cloneWithBaseDiscriminator, to match
similar APIs. Also changed its behavior to copy over the other
discriminator components, instead of eliding them.
Renamed cloneWithDuplicationFactor to
cloneByMultiplyingDuplicationFactor, which more closely matches what
this API does.
Reviewers: dblaikie, wmi
Reviewed By: dblaikie
Subscribers: zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D56220
llvm-svn: 351996
Summary:
Previously no client of ilist traits has needed to know about transfers
of nodes within the same list, so as an optimization, ilist doesn't call
transferNodesFromList in that case. However, now there are clients that
want to use ilist traits to cache instruction ordering information to
optimize dominance queries of instructions in the same basic block.
This change updates the existing ilist traits users to detect in-list
transfers and do nothing in that case.
After this change, we can start caching instruction ordering information
in LLVM IR data structures. There are two main ways to do that:
- by putting an order integer into the Instruction class
- by maintaining order integers in a hash table on BasicBlock
I plan to implement and measure both, but I wanted to commit this change
first to enable other out of tree ilist clients to implement this
optimization as well.
Reviewers: lattner, hfinkel, chandlerc
Subscribers: hiraditya, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D57120
llvm-svn: 351992
VPlan-native path
Context: Patch Series #2 for outer loop vectorization support in LV
using VPlan. (RFC:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119523.html).
Patch series #2 checks that inner loops are still trivially lock-step
among all vector elements. Non-loop branches are blindly assumed as
divergent.
Changes here implement VPlan based predication algorithm to compute
predicates for blocks that need predication. Predicates are computed
for the VPLoop region in reverse post order. A block's predicate is
computed as OR of the masks of all incoming edges. The mask for an
incoming edge is computed as AND of predecessor block's predicate and
either predecessor's Condition bit or NOT(Condition bit) depending on
whether the edge from predecessor block to the current block is true
or false edge.
Reviewers: fhahn, rengolin, hsaito, dcaballe
Reviewed By: fhahn
Patch by Satish Guggilla, thanks!
Differential Revision: https://reviews.llvm.org/D53349
llvm-svn: 351990
This version of gcc seems to be having issues with raw literals inside macro
arguments. I change the string to use regular string literals instead.
llvm-svn: 351756
This patch introduces the field `ExpressionSize` in SCEV. This field is
calculated only once on SCEV creation, and it represents the complexity of
this SCEV from arithmetical point of view (not from the point of the number
of actual different SCEV nodes that are used in the expression). Roughly
saying, it is the number of operands and operations symbols when we print this
SCEV.
A formal definition is following: if SCEV `X` has operands
`Op1`, `Op2`, ..., `OpN`,
then
Size(X) = 1 + Size(Op1) + Size(Op2) + ... + Size(OpN).
Size of SCEVConstant and SCEVUnknown is one.
Expression size may be used as a universal way to limit SCEV transformations
for huge SCEVs. Currently, we have a bunch of options that represents various
limits (such as recursion depth limit) that may not make any sense from the
point of view of a LLVM users who is not familiar with SCEV internals, and all
these different options pursue one goal. A more general rule that may
potentially allow us to get rid of this redundancy in options is "do not make
transformations with SCEVs of huge size". It can apply to all SCEV traversals
and transformations that may need to visit a SCEV node more than once, hence
they are prone to combinatorial explosions.
This patch only introduces SCEV sizes calculation as NFC, its utilization will
be introduced in follow-up patches.
Differential Revision: https://reviews.llvm.org/D35989
Reviewed By: reames
llvm-svn: 351725
As noted in https://bugs.llvm.org/show_bug.cgi?id=36651, the specialization for
isPodLike<std::pair<...>> did not match the expectation of
std::is_trivially_copyable which makes the memcpy optimization invalid.
This patch renames the llvm::isPodLike trait into llvm::is_trivially_copyable.
Unfortunately std::is_trivially_copyable is not portable across compiler / STL
versions. So a portable version is provided too.
Note that the following specialization were invalid:
std::pair<T0, T1>
llvm::Optional<T>
Tests have been added to assert that former specialization are respected by the
standard usage of llvm::is_trivially_copyable, and that when a decent version
of std::is_trivially_copyable is available, llvm::is_trivially_copyable is
compared to std::is_trivially_copyable.
As of this patch, llvm::Optional is no longer considered trivially copyable,
even if T is. This is to be fixed in a later patch, as it has impact on a
long-running bug (see r347004)
Note that GCC warns about this UB, but this got silented by https://reviews.llvm.org/D50296.
Differential Revision: https://reviews.llvm.org/D54472
llvm-svn: 351701
to reflect the new license. These used slightly different spellings that
defeated my regular expressions.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351648
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This is a follow-up to r351448. It adds support for other _*Z extensions
of the Itanium demanling, to the newly available demangle function
heuristic.
Reviewed by: erik.pilkington, rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D56855
llvm-svn: 351551
Summary:
The operators simply print the underlying value or "None".
The trickier part of this patch is making sure the streaming operators
work even in unit tests (which was my primary motivation, though I can
also see them being useful elsewhere). Since the stream operator was a
template, implicit conversions did not kick in, and our gtest glue code
was explicitly introducing an implicit conversion to make sure other
implicit conversions do not kick in :P. I resolve that by specializing
llvm_gtest::StreamSwitch for llvm:Optional<T>.
Reviewers: sammccall, dblaikie
Reviewed By: sammccall
Subscribers: mgorny, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D56795
llvm-svn: 351548
This allows it to be used in an upcoming llvm-readobj change.
A small change in internal behaviour of the function is to always call
the microsoftDemangle function if the string does not have an itanium
encoding prefix, rather than only if it starts with '?'. This is
harmless because the microsoftDemangle function does the same check
already.
Reviewed by: grimar, erik.pilkington
Differential Revision: https://reviews.llvm.org/D56721
llvm-svn: 351448
Summary:
The version of make_absolute which accepted a specific directory to use
as the "base" for the computation could never fail, even though it
returned a std::error_code. The reason for that seems to be historical
-- the CWD flavour (which can fail due to failure to retrieve CWD) was
there first, and the new version was implemented by extending that.
This removes the error return value from the non-CWD overload and
reimplements the CWD version on top of that. This enables us to remove
some dead code where people were pessimistically trying to handle the
errors returned from this function.
Reviewers: zturner, sammccall
Subscribers: hiraditya, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D56599
llvm-svn: 351317
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
This adds support for multilib paths for wasm32 targets, following
[Debian's Multiarch conventions], and also adds an experimental OS name in
order to test it.
[Debian's Multiarch conventions]: https://wiki.debian.org/Multiarch/
Differential Revision: https://reviews.llvm.org/D56553
llvm-svn: 351163
Summary:
Previously only one RealFileSystem instance was available, and its working
directory is shared with the process. This doesn't work well for multithreaded
programs that want to work with relative paths - the vfs::FileSystem is assumed
to provide the working directory, but a thread cannot control this exclusively.
The new vfs::createPhysicalFileSystem() factory copies the process's working
directory initially, and then allows it to be independently modified.
This implementation records the working directory path, and glues it to relative
paths to provide the correct absolute path to the sys::fs:: functions.
This will give different results in unusual situations (e.g. the CWD is moved).
The main alternative is the use of openat(), fstatat(), etc to ask the OS to
resolve paths relative to a directory handle which can be kept open. This is
more robust. There are two reasons not to do this initially:
1. these functions are not available on all supported Unixes, and are somewhere
between difficult and unavailable on Windows. So we need a path-based
fallback anyway.
2. this would mean also adding support at the llvm::sys::fs level, which is a
larger project. My clearest idea is an OS-specific `BaseDirectory` object
that can be optionally passed to functions there. Eventually this could be
backed by either paths or a fd where openat() is supported.
This is a large project, and demonstrating here that a path-based fallback
works is a useful prerequisite.
There is some subtlety to the path-manipulation mechanism:
- when setting the working directory, both Specified=makeAbsolute(path) and
Resolved=realpath(path) are recorded. These may differ in the presence of
symlinks.
- getCurrentWorkingDirectory() and makeAbsolute() use Specified - this is
similar to the behavior of $PWD and sys::path::current_path
- IO operations like openFileForRead use Resolved. This is similar to the
behavior of an openat() based implementation, that doesn't see changes
in symlinks.
There may still be combinations of operations and FS states that yield unhelpful
behavior. This is hard to avoid with symlinks and FS abstractions :(
The caching behavior of the current working directory is removed in this patch.
getRealFileSystem() is now specified to link to the process CWD, so the caching
is incorrect.
The user who needed this so far is clangd, which will immediately switch to
createPhysicalFileSystem().
Reviewers: ilya-biryukov, bkramer, labath
Subscribers: ioeric, kadircet, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D56545
llvm-svn: 351050
Summary:
Add support for options that always prefix their value, giving an error
if the value is in the next argument or if the option is given a value
assignment (ie. opt=val). This is the desired behavior for the -D option
of FileCheck for instance.
Copyright:
- Linaro (changes in version 2 of revision D55940)
- GraphCore (changes in later versions and introduced when creating
D56549)
Reviewers: jdenny
Subscribers: llvm-commits, probinson, kristina, hiraditya,
JonChesterfield
Differential Revision: https://reviews.llvm.org/D56549
llvm-svn: 351038
This shortcut mechanism for creating types was added 10 years ago, but
has seen almost no uptake since then, neither internally nor in
external projects.
The very small number of characters saved by using it does not seem
worth the mental overhead of an additional type-creation API, so,
delete it.
Differential Revision: https://reviews.llvm.org/D56573
llvm-svn: 351020
On AIX, attempting (without root) to set the sticky bit on a file with
the `chmod` utility will give:
```
chmod: not all requested changes were made to <file>
```
The same occurs when modifying other permission bits on a file with the
sticky bit already set.
It seems that the `chmod` function will report success despite failing
to set the sticky bit.
llvm-svn: 350735
Prediction control instructions are only
mandatory from v8.5a onwards but is optional
from Armv8.0-A. This patch adds a command
line option to enable it by it's own.
Differential Revision: https://reviews.llvm.org/D56007
llvm-svn: 350385
This makes the target name consistent with how all the other unit tests are
named.
Differential Revision: https://reviews.llvm.org/D56216
llvm-svn: 350339
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also renames FeatureSpecRestrict to FeatureSB.
Reviewed By: olista01, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55990
llvm-svn: 350299
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also moves to FeatureSB the old FeatureSpecRestrict.
Reviewers: pbarrio, olista01, t.p.northover, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55921
llvm-svn: 350126
Summary:
Added a pair of APIs for encoding/decoding the 3 components of a DWARF discriminator described in http://lists.llvm.org/pipermail/llvm-dev/2016-October/106532.html: the base discriminator, the duplication factor (useful in profile-guided optimization) and the copy index (used to identify copies of code in cases like loop unrolling)
The encoding packs 3 unsigned values in 32 bits. This CL addresses 2 issues:
- communicates overflow back to the user
- supports encoding all 3 components together. Current APIs assume a sequencing of events. For example, creating a new discriminator based on an existing one by changing the base discriminator was not supported.
Reviewers: davidxl, danielcdh, wmi, dblaikie
Reviewed By: dblaikie
Subscribers: zzheng, dmgreen, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D55681
llvm-svn: 349973
Weak symbols are supposed to be supported in the ELF TextAPI
implementation, but the YAML handler didn't read or write the `Weak`
member of ELFSymbol. This change adds the YAML mapping and updates tests
to ensure correct behavior.
Differential Revision: https://reviews.llvm.org/D56020
llvm-svn: 349950
Summary:
This function checks whether the mappings in the interval map overlap
with the given range [a;b]. The motivation is to enable checking for
overlap before inserting a new interval into the map.
Reviewers: vsk, dblaikie
Subscribers: dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D55760
llvm-svn: 349898
Summary:
This function is very similar to add_llvm_library(), so this patch merges it
into add_llvm_library() and replaces all calls to add_llvm_loadable_module(lib ...)
with add_llvm_library(lib MODULE ...)
Reviewers: philip.pfaffe, beanz, chandlerc
Reviewed By: philip.pfaffe
Subscribers: chapuni, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51748
llvm-svn: 349839
We need to keep the underlying profile reader alive as long as the
profile data, because the profile data may contain StringRefs referring
to strings in the reader's name table.
llvm-svn: 349600
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
Summary:
In addition to knowing that an instruction is changed. It's also useful to
know when it's about to change. For example, it might print the instruction so
you can track the changes in a debug log, it might remove it from some queue
while it's being worked on, or it might want to change several instructions as
a single transaction and act on all the changes at once.
Added changingInstr() to all existing uses of changedInstr()
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55623
llvm-svn: 348992
Summary:
There's little of interest that can be done to an already-erased instruction.
You can't inspect it, write it to a debug log, etc. It ought to be notification
that we're about to erase it. Rename the function to clarify the timing of the
event and reflect current usage.
Also fixed one case where we were trying to print an erased instruction.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55611
llvm-svn: 348976
IR-printing AfterPass instrumentation might be called on a loop
that has just been invalidated. We should skip printing it to
avoid spurious asserts.
Reviewed By: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D54740
llvm-svn: 348887
This change makes DT_SONAME treated as an optional trait for ELF TextAPI
stubs. This change accounts for the fact that shared objects aren't
guaranteed to have a DT_SONAME entry. Tests have been updated to check
for correct behavior of an optional soname.
Differential Revision: https://reviews.llvm.org/D55533
llvm-svn: 348817
https://reviews.llvm.org/D55294
Previously MachineIRBuilder::buildInstr used to accept variadic
arguments for sources (which were either unsigned or
MachineInstrBuilder). While this worked well in common cases, it doesn't
allow us to build instructions that have multiple destinations.
Additionally passing in other optional parameters in the end (such as
flags) is not possible trivially. Also a trivial call such as
B.buildInstr(Opc, Reg1, Reg2, Reg3)
can be interpreted differently based on the opcode (2defs + 1 src for
unmerge vs 1 def + 2srcs).
This patch refactors the buildInstr to
buildInstr(Opc, ArrayRef<DstOps>, ArrayRef<SrcOps>)
where DstOps and SrcOps are typed unions that know how to add itself to
MachineInstrBuilder.
After this patch, most invocations would look like
B.buildInstr(Opc, {s32, DstReg}, {SrcRegs..., SrcMIBs..});
Now all the other calls (such as buildAdd, buildSub etc) forward to
buildInstr. It also makes it possible to build instructions with
multiple defs.
Additionally in a subsequent patch, we should make it possible to add
flags directly while building instructions.
Additionally, the main buildInstr method is now virtual and other
builders now only have to override buildInstr (for say constant
folding/cseing) is straightforward.
Also attached here (https://reviews.llvm.org/F7675680) is a clang-tidy
patch that should upgrade the API calls if necessary.
llvm-svn: 348815
A dependency on TestingSupport was introduced in rL348735 but
library was not incldued in the LLVM_LINK_LLVM_DYLIB build.
Differential Revision: https://reviews.llvm.org/D55526
llvm-svn: 348803
Summary: The APFloat and Constant APIs taking an APInt allow arbitrary payloads,
and that's great. There's a convenience API which takes an unsigned, and that's
silly because it then directly creates a 64-bit APInt. Just change it to 64-bits
directly.
At the same time, add ConstantFP NaN getters which match the APFloat ones (with
getQNaN / getSNaN and APInt parameters).
Improve the APFloat testing to set more payload bits.
Reviewers: scanon, rjmccall
Subscribers: jkorous, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D55460
llvm-svn: 348791
The list generated in the target parser tests is the
same as the one in the AArch64 target parser.
Use that one instead.
Differential Revision: https://reviews.llvm.org/D55509
llvm-svn: 348757
Since TBEHandler doesn't maintain state or otherwise have any need to be
a class right now, the read and write functions have been moved out and
turned into standalone functions. Additionally, the TBE read function
has been updated to return an Expected value for better error handling.
Tests have been updated to reflect these changes.
Differential Revision: https://reviews.llvm.org/D55450
llvm-svn: 348735
When CodeExtractor outlines values which are used by the original
function, it must store those values in some in-out parameter. This
store instruction must not be inserted in between a PHI and an EH pad
instruction, as that results in invalid IR.
This fixes the following verifier failure seen while outlining within
ObjC methods with live exit values:
The unwind destination does not have an exception handling instruction!
%call35 = invoke i8* bitcast (i8* (i8*, i8*, ...)* @objc_msgSend to i8* (i8*, i8*)*)(i8* %exn.adjusted, i8* %1)
to label %invoke.cont34 unwind label %lpad33, !dbg !4183
The unwind destination does not have an exception handling instruction!
invoke void @objc_exception_throw(i8* %call35) #12
to label %invoke.cont36 unwind label %lpad33, !dbg !4184
LandingPadInst not the first non-PHI instruction in the block.
%3 = landingpad { i8*, i32 }
catch i8* null, !dbg !1411
rdar://46540815
llvm-svn: 348562
https://reviews.llvm.org/D54980
This provides a standard API across GISel passes to observe and notify
passes about changes (insertions/deletions/mutations) to MachineInstrs.
This patch also removes the recordInsertion method in MachineIRBuilder
and instead provides method to setObserver.
Reviewed by: vkeles.
llvm-svn: 348406
Like the already existing zip_shortest/zip_first iterators, zip_longest
iterates over multiple iterators at once, but has as many iterations as
the longest sequence.
This means some iterators may reach the end before others do.
zip_longest uses llvm::Optional's None value to mark a
past-the-end value.
zip_longest is not reverse-iteratable because the tuples iterated over
would be different for different length sequences (IMHO for the same
reason neither zip_shortest nor zip_first should be reverse-iteratable;
one can still reverse the ranges individually if that's the expected
behavior).
In contrast to zip_shortest/zip_first, zip_longest tuples contain
rvalues instead of references. This is because llvm::Optional cannot
contain reference types and the value-initialized default does not have
a memory location a reference could point to.
The motivation for these iterators is to use C++ foreach to compare two
lists of ordered attributes in D48100 (SemaOverload.cpp and
ASTReaderDecl.cpp).
Idea by @hfinkel.
This re-commits r348301 which was reverted by r348303.
The compilation error by gcc 5.4 was resolved using make_tuple in the in
the initializer_list.
The compileration error by msvc14 was resolved by splitting
ZipLongestValueType (which already was a workaround for msvc15) into
ZipLongestItemType and ZipLongestTupleType.
Differential Revision: https://reviews.llvm.org/D48348
llvm-svn: 348323
Like the already existing zip_shortest/zip_first iterators, zip_longest
iterates over multiple iterators at once, but has as many iterations as
the longest sequence.
This means some iterators may reach the end before others do.
zip_longest uses llvm::Optional's None value to mark a
past-the-end value.
zip_longest is not reverse-iteratable because the tuples iterated over
would be different for different length sequences (IMHO for the same
reason neither zip_shortest nor zip_first should be reverse-iteratable;
one can still reverse the ranges individually if that's the expected
behavior).
In contrast to zip_shortest/zip_first, zip_longest tuples contain
rvalues instead of references. This is because llvm::Optional cannot
contain reference types and the value-initialized default does not have
a memory location a reference could point to.
The motivation for these iterators is to use C++ foreach to compare two
lists of ordered attributes in D48100 (SemaOverload.cpp and
ASTReaderDecl.cpp).
Idea by @hfinkel.
Differential Revision: https://reviews.llvm.org/D48348
llvm-svn: 348301
If a PHI node out of extracted region has multiple incoming values from it,
split this PHI on two parts. First PHI has incomings only from region and
extracts with it (they are placed to the separate basic block that added to the
list of outlined), and incoming values in original PHI are replaced by first
PHI. Similar solution is already used in CodeExtractor for PHIs in entry block
(severSplitPHINodes method). It covers PR39433 bug.
Patch by Sergei Kachkov!
Differential Revision: https://reviews.llvm.org/D55018
llvm-svn: 348205
http://lists.llvm.org/pipermail/llvm-dev/2018-September/126472.html
TextAPI is a library and accompanying tool that allows conversion between binary shared object stubs and textual counterparts. The motivations and uses cases for this are explained thoroughly in the llvm-dev proposal [1]. This initial commit proposes a potential structure for the TAPI library, also including support for reading/writing text-based ELF stubs (.tbe) in addition to preliminary support for reading binary ELF files. The goal for this patch is to ensure the project architecture appropriately welcomes integration of Mach-O stubbing from Apple's TAPI [2].
Added:
- TextAPI library
- .tbe read support
- .tbe write (to raw_ostream) support
[1] http://lists.llvm.org/pipermail/llvm-dev/2018-September/126472.html
[2] https://github.com/ributzka/tapi
Differential Revision: https://reviews.llvm.org/D53051
llvm-svn: 348170
Summary:
SSBS (Speculative Store Bypass Safe) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SSBS, as it was previously only possible to
enable by selecting -march=armv8.5-a.
Similar patch upstream in GNU binutils:
https://sourceware.org/ml/binutils/2018-09/msg00274.html
Reviewers: olista01, samparker, aemerson
Reviewed By: samparker
Subscribers: javed.absar, kristof.beyls, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D54629
llvm-svn: 348137
If the shift amount is known, we can determine the known bits of the
output based on the known bits of two inputs.
This is essentially the same functionality as implemented in D54869,
but for ValueTracking rather than InstCombine SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D55140
llvm-svn: 348091
Generalize the existing MatchSelectPatternTest class to also work
with other types of tests. This reduces the amount of boilerplate
necessary to write ValueTracking tests in general, and computeKnownBits
tests in particular.
The inherited convention is that the function must be @test and the
tested instruction %A.
Differential Revision: https://reviews.llvm.org/D55141
llvm-svn: 348043
Moving to PlatformType from BinaryFormat had some UB fallout when handing
unknown platforms or malformed input files.
This should fix the sanitizer bots.
llvm-svn: 347836
Add the required target triples to LLVMSupport to support Hurd
in LLVM (formally `pc-hurd-gnu`).
Patch by sthibaul (Samuel Thibault)
Differential Revision: https://reviews.llvm.org/D54378
llvm-svn: 347832
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
Update: This contains changes to fix issues discovered by the bots:
- add parentheses to silence warnings.
- rename variables
- use PlatformType from BinaryFormat
llvm-svn: 347823
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
llvm-svn: 347808
extract_symbols.py (introduced in D18826) expects all of its library arguments
to be in the same directory - typically <config>/lib. DynamicLibraryLib.lib is
instead to be found in lib/<config>.
This patch intended to make DynamicLibraryLib.lib be created in <config>/lib
alongside most of the other libraries.
I previously tried passing absolute paths to extract_symbols.py but this
generated command lines that were too long for Visual Studio 2015: D54587
Differential Revision: https://reviews.llvm.org/D54701
llvm-svn: 347764
separate files to enable future changes.
This moves ARM and AArch64 target parsing into their
own files. They are still accessible through
TargetParser.h as before.
Several functions in AArch64 which were just forwarders to ARM
have been removed. All except AArch64::getFPUName were unused,
and that was only used in a test. Which itself was overlapping
one in ARM, so it has also been removed.
Differential revision: https://reviews.llvm.org/D53980
llvm-svn: 347741
Summary:
This (very specialized) function was added to enable an LLDB use case.
Now that a more generic interface (overriding of parser functions -
D52992) is available, and LLDB has been converted to use that (D54074),
the function is unused and can be removed.
Reviewers: erik.pilkington, sgraenitz, rsmith
Subscribers: mgorny, hiraditya, christof, libcxx-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D54893
llvm-svn: 347670
We can now select CLZ via the TableGen'erated code, so support G_CTLZ
and G_CTLZ_ZERO_UNDEF throughout the pipeline for types <= s32.
Legalizer:
If the CLZ instruction is available, use it for both G_CTLZ and
G_CTLZ_ZERO_UNDEF. Otherwise, use a libcall for G_CTLZ_ZERO_UNDEF and
lower G_CTLZ in terms of it.
In order to achieve this we need to add support to the LegalizerHelper
for the legalization of G_CTLZ_ZERO_UNDEF for s32 as a libcall (__clzsi2).
We also need to allow lowering of G_CTLZ in terms of G_CTLZ_ZERO_UNDEF
if that is supported as a libcall, as opposed to just if it is Legal or
Custom. Due to a minor refactoring of the helper function in charge of
this, we will also allow the same behaviour for G_CTTZ and G_CTPOP.
This is not going to be a problem in practice since we don't yet have
support for treating G_CTTZ and G_CTPOP as libcalls (not even in
DAGISel).
Reg bank select:
Map G_CTLZ to GPR. G_CTLZ_ZERO_UNDEF should not make it to this point.
Instruction select:
Nothing to do.
llvm-svn: 347545
The `expandTildeExpr` routine just replaces a tilde by a home dir path.
If the home dir has a trailing slash, the result of substitution will
contain double slashes. For example, `HOME=/foo/ ~/bar` gives `/foo//bar`.
That corresponds to (at least) Bash behaviour because the following
command `$HOME=/foo/ echo ~/bar` prints `/foo//bar`.
The `ExpandTilde` test constructs a path expected as the `fs::expand_tilde`
call result by calling `path::append` and the expected path has a single
slash. This patch fixes that and allows to pass the unittest on hosts where
the `HOME` is `/`.
Differential Revision: http://reviews.llvm.org/D54752
llvm-svn: 347346
Skip all MappedMemoryTest variants that rely on memory pages being
mapped for MF_WRITE|MF_EXEC when MPROTECT is enabled on NetBSD. W^X
protection causes all those mmap() calls to fail, causing the tests
to fail.
Differential Revision: https://reviews.llvm.org/D54080
llvm-svn: 347337
This adds the sadd_sat, uadd_sat, ssub_sat, usub_sat methods for performing saturating additions and subtractions to APInt.
Split out from D54237.
Patch by: nikic (Nikita Popov)
Differential Revision: https://reviews.llvm.org/D54332
llvm-svn: 347324
This patch fixes the issue noticed in D54532.
The problem is that cst_pred_ty-based matchers like m_Zero() currently do not match
scalar undefs (as expected), but *do* match vector undefs. This may lead to optimization
inconsistencies in rare cases.
There is only one existing test for which output changes, reverting the change from D53205.
The reason here is that vector fsub undef, %x is no longer matched as an m_FNeg(). While I
think that the new output is technically worse than the previous one, it is consistent with
scalar, and I don't think it's really important either way (generally that undef should have
been folded away prior to reassociation.)
I've also added another test case for this issue based on InstructionSimplify. It took some
effort to find that one, as in most cases undef folds are either checked first -- and in the
cases where they aren't it usually happens to not make a difference in the end. This is the
only case I was able to come up with. Prior to this patch the test case simplified to undef
in the scalar case, but zeroinitializer in the vector case.
Patch by: @nikic (Nikita Popov)
Differential Revision: https://reviews.llvm.org/D54631
llvm-svn: 347318
Apply review comments of https://reviews.llvm.org/D54185 to other target as well, specifically:
1. make anonymous namespaces as small as possible, avoid using static inside anonymous namespaces
2. Add missing header to some files
3. GetLoadImmediateOpcodem-> getLoadImmediateOpcode
4. Fix typo
Differential Revision: https://reviews.llvm.org/D54343
llvm-svn: 347309
This will hold flags specific to subprograms. In the future
we could potentially free up scarce bits in DIFlags by moving
subprogram-specific flags from there to the new flags word.
This patch does not change IR/bitcode formats, that will be
done in a follow-up.
Differential Revision: https://reviews.llvm.org/D54597
llvm-svn: 347239
Every Analysis pass has a get method that returns a reference of the Result of
the Analysis, for example, BlockFrequencyInfo
&BlockFrequencyInfoWrapperPass::getBFI(). I believe that
ProfileSummaryInfo::getPSI() is the only exception to that, as it was returning
a pointer.
Another change is renaming isHotBB and isColdBB to isHotBlock and isColdBlock,
respectively. Most methods use BB as the argument of variable names while
methods usually refer to Basic Blocks as Blocks, instead of BB. For example,
Function::getEntryBlock, Loop:getExitBlock, etc.
I also fixed one of the comments.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D54669
llvm-svn: 347182
It fixes the case when Objective-C framework is added as a subframework
through a symlink. When parent framework infers a module map and fails
to detect a symlink, it would add a subframework as a submodule. And
when we parse module map for the subframework, we would encounter an
error like
> error: umbrella for module 'WithSubframework.Foo' already covers this directory
By implementing `getRealPath` "an egregious but useful hack" in
`ModuleMap::inferFrameworkModule` works as expected.
rdar://problem/45821279
Reviewers: bruno, benlangmuir, erik.pilkington
Reviewed By: bruno
Subscribers: hiraditya, dexonsmith, JDevlieghere, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D54245
llvm-svn: 347009
Add data structure to represent MessagePack "documents" and convert
to/from both MessagePack and YAML encodings.
Differential Revision: https://reviews.llvm.org/D48175
llvm-svn: 346978
Add support for "polymorphic" types to YAMLIO.
PolymorphicTraits can dynamically switch between other traits (Scalar, Map, or
Sequence). When inputting, the PolymorphicTraits type is told which type to
become, and when outputting the PolymorphicTraits type is asked which type it
currently is.
Also add support for TaggedScalarTraits to allow dynamically differentiating
between multiple scalar types using YAML tags.
Serialize empty maps as "{}" and empty sequences as "[]", so that types
are preserved when round-tripping PolymorphicTraits. This change has
equivalent semantics, but may break e.g. tests which compare output
verbatim.
Differential Revision: https://reviews.llvm.org/D48144
llvm-svn: 346884
This patch adds an initial implementation of the look-ahead SLP tree
construction described in 'Look-Ahead SLP: Auto-vectorization in the Presence
of Commutative Operations, CGO 2018 by Vasileios Porpodas, Rodrigo C. O. Rocha,
Luís F. W. Góes'.
It returns an SLP tree represented as VPInstructions, with combined
instructions represented as a single, wider VPInstruction.
This initial version does not support instructions with multiple
different users (either inside or outside the SLP tree) or
non-instruction operands; it won't generate any shuffles or
insertelement instructions.
It also just adds the analysis that builds an SLP tree rooted in a set
of stores. It does not include any cost modeling or memory legality
checks. The plan is to integrate it with VPlan based cost modeling, once
available and to only apply it to operations that can be widened.
A follow-up patch will add a support for replacing instructions in a
VPlan with their SLP counter parts.
Reviewers: Ayal, mssimpso, rengolin, mkuper, hfinkel, hsaito, dcaballe, vporpo, RKSimon, ABataev
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D4949
llvm-svn: 346857
The definition of `pointer_iterator` omits what should be a `iterator_traits::<>::iterator_category` parameter from `iterator_adaptor_base`. As a result, iterators based on `pointer_iterator` always have defaulted value types and the wrong iterator category.
The definition of `pointee_iterator` just a few lines above does this correctly.
This resolves [[ https://bugs.llvm.org/show_bug.cgi?id=39617 | bug 39617 ]].
Patch by Dylan MacKenzie!
Reviewers: dblaikie
Differential Revision: https://reviews.llvm.org/D54377
llvm-svn: 346833
Summary:
Ranges base address specifiers can save a lot of object size in
relocation records especially in optimized builds.
For an optimized self-host build of Clang with split DWARF and debug
info compression in object files, but uncompressed debug info in the
executable, this change produces about 18% smaller object files and 6%
larger executable.
While it would've been nice to turn this on by default, gold's 32 bit
gdb-index support crashes on this input & I don't think there's any
perfect heuristic to implement solely in LLVM that would suffice - so
we'll need a flag one way or another (also possible people might want to
aggressively optimized for executable size that contains debug info
(even with compression this would still come at some cost to executable
size)) - so let's plumb it through.
Differential Revision: https://reviews.llvm.org/D54242
llvm-svn: 346788
In D54435 there was some discussion about the expand_tilde flag for
real_path that I wanted to expose through the VFS. The consensus is that
these two things should be separate functions. Since we already have the
code for this I went ahead and added a function expand_tilde that does
just that.
Differential revision: https://reviews.llvm.org/D54448
llvm-svn: 346776
This patch updates DuplicateInstructionsInSplitBetween to update a DTU
instead of applying updates to the DT directly.
Given that there only are 2 users, also updated them in this patch to
avoid churn.
I slightly moved the code in CallSiteSplitting around to reduce the
places where we have to pass in DTU. If necessary, I could split those
changes in a separate patch.
This fixes missing DT updates when dealing with musttail calls in
CallSiteSplitting, by using DTU->deleteBB.
Reviewers: junbuml, kuhar, NutshellySima, indutny, brzycki
Reviewed By: NutshellySima
llvm-svn: 346769
In a lot of places an empty string was passed as the ErrorBanner to
logAllUnhandledErrors. This patch makes that argument optional to
simplify the call sites.
llvm-svn: 346604
Summary:
This simplifies the code and moves everything to tablegen for consistency. This
also prepares the ground for adding issue counters.
Reviewers: gchatelet, john.brawn, jsji
Subscribers: nemanjai, mgorny, javed.absar, kbarton, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54297
llvm-svn: 346489
Summary:
This change covers a number of things spanning LLVM and compiler-rt,
which are related in a non-trivial way.
In LLVM, we have a library that handles the FDR mode even log loading,
which uses C++'s runtime polymorphism feature to better faithfully
represent the events that are written down by the FDR mode runtime. We
do this by interpreting a trace that's serliased in a common format
agreed upon by both the trace loading library and the FDR mode runtime.
This library is under active development, which consists of features
allowing us to reconstitute a higher-level event log.
This event log is used by the conversion and visualisation tools we have
for interpreting XRay traces.
One of the tools we have is a diagnostic tool in llvm-xray called
`fdr-dump` which we've been using to debug our expectations of what the
FDR runtime should be writing and what the logical FDR event log
structures are. We use this fairly extensively to reason about why some
non-trivial traces we're generating with FDR mode runtimes fail to
convert or fail to parse correctly.
One of these failures we've found in manual debugging of some of the
traces we've seen involve an inconsistency between the buffer extents (a
record indicating how many bytes to follow are part of a logical
thread's event log) and the record of the bytes written into the log --
sometimes it turns out the data could be garbage, due to buffers being
recycled, but sometimes we're seeing the buffer extent indicating a log
is "shorter" than the actual records associated with the buffer. This
case happens particularly with function entry records with a call
argument.
This change for now updates the FDR mode runtime to write the bytes for
the function call and arg record before updating the buffer extents
atomically, allowing multiple threads to see a consistent view of the
data in the buffer using the atomic counter associated with a buffer.
What we're trying to prevent here is partial updates where we see the
intermediary updates to the buffer extents (function record size then
call argument record size) becoming observable from another thread, for
instance, one doing the serialization/flushing.
To do both diagnose this issue properly, we need to be able to honour
the extents being set in the `BufferExtents` records marking the
beginning of the logical buffers when reading an FDR trace. Since LLVM
doesn't use C++'s RTTI mechanism, we instead follow the advice in the
documentation for LLVM Style RTTI
(https://llvm.org/docs/HowToSetUpLLVMStyleRTTI.html). We then rely on
this RTTI feature to ensure that our file-based record producer (our
streaming "deserializer") can honour the extents of individual buffers
as we interpret traces.
This also sets us up to be able to eventually do smart
skipping/continuation of FDR logs, seeking instead to find BufferExtents
records in cases where we find potentially recoverable errors. In the
meantime, we make this change to operate in a strict mode when reading
logical buffers with extent records.
Reviewers: mboerger
Subscribers: hiraditya, llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D54201
llvm-svn: 346473
This is patch to add PowerPC target to llvm-exegesis.
The target does just enough to be able to run llvm-exegesis in latency mode for at least some opcodes.
Differential Revision: https://reviews.llvm.org/D54185
llvm-svn: 346411
We have a lot of various bugs that are caused by misuse of SCEV (in particular in LV),
all of them can simply be described as "we ask SCEV to prove some fact on invalid IR".
Some of examples of those are PR36311, PR37221, PR39160.
The problem is that these failues manifest differently (what we saw was failure of various
asserts across SCEV, but there can also be miscompiles). This patch adds an assert into two
SCEV methods that strongly rely on correctness of the IR and are involved in known failues.
This will at least allow us to have a clear indication of what was wrong in this case.
This patch also fixes a unit test with incorrect IR that fails this verification.
Differential Revision: https://reviews.llvm.org/D52930
Reviewed By: fhahn
llvm-svn: 346389
Summary:
This change updates the version number for FDR logs to 5, and update the
trace processing to support changes in the custom event records.
In the runtime, since we're already writing down the record preamble to
handle CPU migrations and TSC wraparound, we can use the same TSC delta
encoding in the custom event and typed event records that we use in
function event records. We do the same change to typed events (which
were unsupported before this change in the trace processing) which now
show up in the trace.
Future changes should increase our testing coverage to make custom and
typed events as first class entities in the FDR mode log processing
tools.
This change is also a good example of how we end up supporting new
record types in the FDR mode implementation. This shows the places where
new record types are added and supported.
Depends on D54139.
Reviewers: mboerger
Subscribers: hiraditya, arphaman, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D54140
llvm-svn: 346293
MachineModuleInfo can only be used in code using lib/CodeGen, hence we
can keep a more specific reference to LLVMTargetMachine rather than just
TargetMachine around.
llvm-svn: 346182
In PR39475:
https://bugs.llvm.org/show_bug.cgi?id=39475
..we may fail to recognize/simplify fabs() in some cases because we do not
canonicalize fcmp with a -0.0 operand.
Adding that canonicalization can cause regressions on min/max FP tests, so
that's this patch: for the purpose of determining whether something is min/max,
let the value returned by the select determine how we treat a 0.0 operand in the fcmp.
This patch doesn't actually change the -0.0 to +0.0. It just changes the analysis, so
we don't fail to recognize equivalent min/max patterns that only differ in the
signbit of 0.0.
Differential Revision: https://reviews.llvm.org/D54001
llvm-svn: 346097
These methods were just wrappers around getNode with additional asserts (identical and repeated 3 times). But getNode already has a switch that can be used to hold these asserts that allows them to be shared for all 3 opcodes. This also enables checking on the places that create these nodes without using the wrappers.
The rest of the patch is just changing all callers to use getNode directly.
llvm-svn: 346087
This patch gives the IR ComputeNumSignBits the same functionality as the
DAG version (the code is derived from the existing code).
This an extension of the single input shuffle analysis added with D53659.
Differential Revision: https://reviews.llvm.org/D53987
llvm-svn: 346071
Summary:
Change the dynamic cast in CallBase::getCalledFunction() to allow
null-valued function operands.
This patch fixes a crash that occurred when a funtion operand of a
call instruction was dropped, and later on a metadata-carrying
instruction was printed out. When allocating the metadata slot numbers,
getCalledFunction() would be invoked on the call with the dropped
operand, resulting in a failed non-null assertion in isa<>.
This fixes PR38924, in which a printout in DBCE crashed due to this.
This aligns getCalledFunction() with getCalledValue(), as the latter
allows the operand to be null.
Reviewers: vsk, dexonsmith, hfinkel
Reviewed By: dexonsmith
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D52537
llvm-svn: 345966
Summary:
This change cuts across compiler-rt and llvm, to increment the FDR log
version number to 4, and include the CPU ID in the custom event records.
This is a step towards allowing us to change the `llvm::xray::Trace`
object to start representing both custom and typed events in the stream
of records. Follow-on changes will allow us to change the kinds of
records we're presenting in the stream of traces, to incorporate the
data in custom/typed events.
A follow-on change will handle the typed event case, where it may not
fit within the 15-byte buffer for metadata records.
This work is part of the larger effort to enable writing analysis and
processing tools using a common in-memory representation of the events
found in traces. The work will focus on porting existing tools in LLVM
to use the common representation and informing the design of a
library/framework for expressing trace event analysis as C++ programs.
Reviewers: mboerger, eizan
Subscribers: hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D53920
llvm-svn: 345798
The "regular" file system has a useful feature that makes it possible to
stop recursing when using the recursive directory iterators. This
functionality was missing for the VFS recursive iterator and this patch
adds that.
Differential revision: https://reviews.llvm.org/D53465
llvm-svn: 345793
Summary:
Re-worked SparseBitVector's most-recently-used-word caching (CurrElementIter)
such that SparseBitVector::test() can be made const. This came up when
attempting to test individual bits in a SparseBitVector which was a member of a
const object.
The cached iterator has no bearing on the externally visible state, it's merely
a performance optimization. Therefore it has been made mutable and
FindLowerBound() has been split into a const and non-const function
(FindLowerBound/FindLowerBoundConst) for the const/non-const
interfaces.
Reviewers: rtereshin
Reviewed By: rtereshin
Subscribers: rtereshin, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D53447
llvm-svn: 345772
This removes the assertion that a copy of a moved-from SmallSetIterator
equals the original, which is illegal due to SmallSetIterator including
an instance of a standard `std::set` iterator.
C++ [iterator.requirements.general] states that comparing singular
iterators has undefined result:
> Iterators can also have singular values that are not associated with
> any sequence. [...] Results of most expressions are undefined for
> singular values; the only exceptions are destroying an iterator that
> holds a singular value, the assignment of a non-singular value to an
> iterator that holds a singular value, and, for iterators that satisfy
> the Cpp17DefaultConstructible requirements, using a value-initialized
> iterator as the source of a copy or move operation.
This assertion triggers the following error in the GNU C++ Library in
debug mode under EXPENSIVE_CHECKS:
/usr/include/c++/8.2.1/debug/safe_iterator.h:518:
Error: attempt to compare a singular iterator to a singular iterator.
Objects involved in the operation:
iterator "lhs" @ 0x0x7fff86420670 {
state = singular;
}
iterator "rhs" @ 0x0x7fff86420640 {
state = singular;
}
Patch by Eugene Sharygin.
Reviewers: fhahn, dblaikie, chandlerc
Reviewed By: fhahn, dblaikie
Differential Revision: https://reviews.llvm.org/D53793
llvm-svn: 345712
This defines member function base on the specialization of
std::reverse_iterator for DWARFDie::iterator as required by C++
[reverse.iter.conv].
This fixes unit test DWARFDebugInfoTest.cpp under EXPENSIVE_CHECKS which
currently can't be built due to GNU C++ Library calling this member
function in debug mode.
This fixes https://llvm.org/PR38785
Patch by: Eugene Sharygin
Differential revision: https://reviews.llvm.org/D53792
llvm-svn: 345621
Default property value 'true' preserves current behavior. Value 'false' can be
used to create VFS "root", file system that gives better control over which
files compiler can use during compilation as there are no unpredictable
accesses to real file system.
Non-fallthrough use case changes how we treat multiple VFS overlay
files. Instead of all of them being at the same level just above a real
file system, now they are nested and subsequent overlays can refer to
files in previous overlays.
rdar://problem/39465552
Reviewers: bruno, benlangmuir
Reviewed By: bruno
Subscribers: dexonsmith, cfe-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D50539
llvm-svn: 345431
Summary:
Changes all uses of minnan/maxnan to minimum/maximum
globally. These names emphasize that the semantic difference between
these operations is more than just NaN-propagation.
Reviewers: arsenm, aheejin, dschuff, javed.absar
Subscribers: jholewinski, sdardis, wdng, sbc100, jgravelle-google, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53112
llvm-svn: 345218
The current splitting algorithm works in three stages:
1) Identify cold blocks, then
2) Use forward/backward propagation to mark hot blocks, then
3) Grow a SESE region of blocks *outside* of the set of hot blocks and
start outlining.
While testing this pass on Apple internal frameworks I noticed that some
kinds of control flow (e.g. loops) are never outlined, even though they
unconditionally lead to / follow cold blocks. I noticed two other issues
related to how cold regions are identified:
- An inconsistency can arise in the internal state of the hotness
propagation stage, as a block may end up in both the ColdBlocks set
and the HotBlocks set. Further inconsistencies can arise as these sets
do not match what's in ProfileSummaryInfo.
- It isn't necessary to limit outlining to single-exit regions.
This patch teaches the splitting algorithm to identify maximal cold
regions and outline them. A maximal cold region is defined as the set of
blocks post-dominated by a cold sink block, or dominated by that sink
block. This approach can successfully outline loops in the cold path. As
a side benefit, it maintains less internal state than the current
approach.
Due to a limitation in CodeExtractor, blocks within the maximal cold
region which aren't dominated by a single entry point (a so-called "max
ancestor") are filtered out.
Results:
- X86 (LNT + -Os + externals): 134KB of TEXT were outlined compared to
47KB pre-patch, or a ~3x improvement. Did not see a performance impact
across two runs.
- AArch64 (LNT + -Os + externals + Apple-internal benchmarks): 149KB
of TEXT were outlined. Ditto re: performance impact.
- Outlining results improve marginally in the internal frameworks I
tested.
Follow-ups:
- Outline more than once per function, outline large single basic
blocks, & try to remove unconditional branches in outlined functions.
Differential Revision: https://reviews.llvm.org/D53627
llvm-svn: 345209
Doesn't build on Windows. The call to 'lookup' is ambiguous. Clang and
MSVC agree, anyway.
http://lab.llvm.org:8011/builders/clang-x64-windows-msvc/builds/787
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\unittests\ExecutionEngine\Orc\CoreAPIsTest.cpp(315): error C2668: 'llvm::orc::ExecutionSession::lookup': ambiguous call to overloaded function
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\include\llvm/ExecutionEngine/Orc/Core.h(823): note: could be 'llvm::Expected<llvm::JITEvaluatedSymbol> llvm::orc::ExecutionSession::lookup(llvm::ArrayRef<llvm::orc::JITDylib *>,llvm::orc::SymbolStringPtr)'
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\include\llvm/ExecutionEngine/Orc/Core.h(817): note: or 'llvm::Expected<llvm::JITEvaluatedSymbol> llvm::orc::ExecutionSession::lookup(const llvm::orc::JITDylibSearchList &,llvm::orc::SymbolStringPtr)'
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\unittests\ExecutionEngine\Orc\CoreAPIsTest.cpp(315): note: while trying to match the argument list '(initializer list, llvm::orc::SymbolStringPtr)'
llvm-svn: 345078
In the new scheme the client passes a list of (JITDylib&, bool) pairs, rather
than a list of JITDylibs. For each JITDylib the boolean indicates whether or not
to match against non-exported symbols (true means that they should be found,
false means that they should not). The MatchNonExportedInJD and MatchNonExported
parameters on lookup are removed.
The new scheme is more flexible, and easier to understand.
This patch also updates JITDylib search orders to be lists of (JITDylib&, bool)
pairs to match the new lookup scheme. Error handling is also plumbed through
the LLJIT class to allow regression tests to fail predictably when a lookup from
a lazy call-through fails.
llvm-svn: 345077
Summary:
This allows simplifying references of llvm::foo with foo when the needs
come in the future.
Reviewers: courbet, gchatelet
Reviewed By: gchatelet
Subscribers: javed.absar, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53455
llvm-svn: 344922
Summary:
This patch just extends the `IPDBSession` interface to allow retrieving
of frame data through it, and adds an implementation over DIA. It is needed
for an implementation (for now with DIA) of the conversion from FPO programs
to DWARF expressions mentioned in D53086.
Reviewers: zturner, asmith, rnk
Reviewed By: asmith
Subscribers: mgorny, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D53324
llvm-svn: 344886
Summary:
This was lost during refactoring in rL342644.
Fix and simplify simplify value size handling: always go through a 80 bit value,
because the value can be 1 byte). Add unit tests.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53423
llvm-svn: 344779
Summary:
This is patch 2 of the new DivergenceAnalysis (https://reviews.llvm.org/D50433).
This patch contains a generic divergence analysis implementation for
unstructured, reducible Control-Flow Graphs. It contains two new classes.
The `SyncDependenceAnalysis` class lazily computes sync dependences, which
relate divergent branches to points of joining divergent control. The
`DivergenceAnalysis` class contains the generic divergence analysis
implementation.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: sameerds, kristina, nhaehnle, xbolva00, tschuett, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51491
llvm-svn: 344734
Summary:
The original commit message was:
This uses CRTP (for performance reasons) to allow a user the override
demangler functions to implement custom parsing logic. The motivation
for this is LLDB, which needs to occasionaly modify the mangled names.
One such instance is already implemented via the TypeCallback member,
but this is very specific functionality which does not help with any
other use case. Currently we have a use case for modifying the
constructor flavours, which would require adding another callback. This
approach does not scale.
With CRTP, the user (LLDB) can override any function it needs without
any special support from the demangler library. After LLDB is ported to
use this instead of the TypeCallback mechanism, the callback can be
removed.
The only difference here is the addition of a unit test which exercises
the CRTP mechanism to override a function in the parser.
Reviewers: erik.pilkington, rsmith, EricWF
Subscribers: mgorny, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D53300
llvm-svn: 344703
Summary: LatencyGenerator now computes all possible mode of serial execution for an Instruction upfront and generates CodeTemplate for the ones that give the best results (e.g. no need to generate a two instructions snippet when repeating a single one would do). The next step is to generate even more configurations for cases (e.g. for XOR we should generate "XOR EAX, EAX, EAX" and "XOR EAX, EAX, EBX")
Reviewers: courbet
Reviewed By: courbet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53320
llvm-svn: 344689
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344685
MaterializationResponsibility.
VModuleKeys are intended to enable selective removal of modules from a JIT
session, however for a wide variety of use cases selective removal is not
needed and introduces unnecessary overhead. As of this commit, the default
constructed VModuleKey value is reserved as a "do not track" value, and
becomes the default when adding a new module to the JIT.
This commit also changes the propagation of VModuleKeys. They were passed
alongside the MaterializationResponsibity instance in XXLayer::emit methods,
but are now propagated as part of the MaterializationResponsibility instance
itself (and as part of MaterializationUnit when stored in a JITDylib).
Associating VModuleKeys with MaterializationUnits in this way should allow
for a thread-safe module removal mechanism in the future, even when a module
is in the process of being compiled, by having the
MaterializationResponsibility object check in on its VModuleKey's state
before commiting its results to the JITDylib.
llvm-svn: 344643
This commit adds a 'Legacy' prefix to old ORC layers and utilities, and removes
the '2' suffix from the new ORC layers. If you wish to continue using the old
ORC layers you will need to add a 'Legacy' prefix to your classes. If you were
already using the new ORC layers you will need to drop the '2' suffix.
The legacy layers will remain in-tree until the new layers reach feature
parity with them. This will involve adding support for removing code from the
new layers, and ensuring that performance is comperable.
llvm-svn: 344572
constructor for DenseMap (DenseSet already had an initializer_list constructor).
These changes make it easier to migrate existing code that uses std::map and
std::set (which support initializer_list construction and equality comparison)
to DenseMap and DenseSet.
llvm-svn: 344522
Summary:
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344519
This removes the primary remaining API producing `TerminatorInst` which
will reduce the rate at which code is introduced trying to use it and
generally make it much easier to remove the remaining APIs across the
codebase.
Also clean up some of the stragglers that the previous mechanical update
of variables missed.
Users of LLVM and out-of-tree code generally will need to update any
explicit variable types to handle this. Replacing `TerminatorInst` with
`Instruction` (or `auto`) almost always works. Most of these edits were
made in prior commits using the perl one-liner:
```
perl -i -ple 's/TerminatorInst(\b.* = .*getTerminator\(\))/Instruction\1/g'
```
This also my break some rare use cases where people overload for both
`Instruction` and `TerminatorInst`, but these should be easily fixed by
removing the `TerminatorInst` overload.
llvm-svn: 344504
Summary: This is part one of the change where I simply changed the signature of the functions. More work need to be done to actually produce more than one CodeTemplate per instruction.
Reviewers: courbet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53209
llvm-svn: 344493
Renames:
JITDylib's setFallbackDefinitionGenerator method to setGenerator.
DynamicLibraryFallbackGenerator class to DynamicLibrarySearchGenerator.
ReexportsFallbackDefinitionGenerator to ReexportsGenerator.
llvm-svn: 344489
This adds two arguments to the main ExecutionSession::lookup method:
MatchNonExportedInJD, and MatchNonExported. These control whether and where
hidden symbols should be matched when searching a list of JITDylibs.
A similar effect could have been achieved by filtering search results, but
this would have involved materializing symbol definitions (since materialization
is triggered on lookup) only to throw the results away, among other issues.
llvm-svn: 344467
Summary:
These new intrinsics have the semantics of the `minimum` and `maximum`
operations specified by the latest draft of IEEE 754-2018. Unlike
llvm.minnum and llvm.maxnum, these new intrinsics propagate NaNs and
always treat -0.0 as less than 0.0. `minimum` and `maximum` lower
directly to the existing `fminnan` and `fmaxnan` ISel DAG nodes. It is
safe to reuse these DAG nodes because before this patch were only
emitted in situations where there were known to be no NaN arguments or
where NaN propagation was correct and there were known to be no zero
arguments. I know of only four backends that lower fminnan and
fmaxnan: WebAssembly, ARM, AArch64, and SystemZ, and each of these
lowers fminnan and fmaxnan to instructions that are compatible with
the IEEE 754-2018 semantics.
Reviewers: aheejin, dschuff, sunfish, javed.absar
Subscribers: kristof.beyls, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D52764
llvm-svn: 344437
If you have the string /usr/bin, prior to this patch it would not
be quoted by our YAML serializer. But a string like C:\src would
be, due to the presence of a backslash. This makes the quoting
rules of basically every single file path different depending on
the path syntax (posix vs. Windows).
While technically not required by the YAML specification to quote
forward slashes, when the behavior of paths is inconsistent it
makes it difficult to portably write FileCheck lines that will
work with either kind of path.
Differential Revision: https://reviews.llvm.org/D53169
llvm-svn: 344359
This reverts commit b86c16ad8c97dadc1f529da72a5bb74e9eaed344.
This is being reverted because I forgot to write a useful
commit message, so I'm going to resubmit it with an actual
commit message.
llvm-svn: 344358
Moving away from UnknownSize is part of the effort to migrate us to
LocationSizes (e.g. the cleanup promised in D44748).
This doesn't entirely remove all of the uses of UnknownSize; some uses
require tweaks to assume that UnknownSize isn't just some kind of int.
This patch is intended to just be a trivial replacement for all places
where LocationSize::unknown() will Just Work.
llvm-svn: 344186
Add a library that parses optimization remarks (currently YAML, so based
on the YAMLParser).
The goal is to be able to provide tools a remark parser that is not
completely dependent on YAML, in case we decide to change the format
later.
It exposes a C API which takes a handler that is called with the remark
structure.
It adds a libLLVMOptRemark.a static library, and it's used in-tree by
the llvm-opt-report tool (from which the parser has been mostly moved
out).
Differential Revision: https://reviews.llvm.org/D52776
Fixed the tests by removing the usage of C++11 strings, which seems not
to be supported by gcc 4.8.4 if they're used as a macro argument.
llvm-svn: 344171
Add a library that parses optimization remarks (currently YAML, so based
on the YAMLParser).
The goal is to be able to provide tools a remark parser that is not
completely dependent on YAML, in case we decide to change the format
later.
It exposes a C API which takes a handler that is called with the remark
structure.
It adds a libLLVMOptRemark.a static library, and it's used in-tree by
the llvm-opt-report tool (from which the parser has been mostly moved
out).
Differential Revision: https://reviews.llvm.org/D52776
llvm-svn: 344162
Summary: Simplify code by having LLVMState hold the RegisterAliasingTrackerCache.
Reviewers: courbet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53078
llvm-svn: 344143
This patch moves the virtual file system form clang to llvm so it can be
used by more projects.
Concretely the patch:
- Moves VirtualFileSystem.{h|cpp} from clang/Basic to llvm/Support.
- Moves the corresponding unit test from clang to llvm.
- Moves the vfs namespace from clang::vfs to llvm::vfs.
- Formats the lines affected by this change, mostly this is the result of
the added llvm namespace.
RFC on the mailing list:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/126657.html
Differential revision: https://reviews.llvm.org/D52783
llvm-svn: 344140
There are places where we need to merge multiple LocationSizes of
different sizes into one, and get a sensible result.
There are other places where we want to optimize aggressively based on
the value of a LocationSizes (e.g. how can a store of four bytes be to
an area of storage that's only two bytes large?)
This patch makes LocationSize hold an 'imprecise' bit to note whether
the LocationSize can be treated as an upper-bound and lower-bound for
the size of a location, or just an upper-bound.
This concludes the series of patches leading up to this. The most recent
of which is r344108.
Fixes PR36228.
Differential Revision: https://reviews.llvm.org/D44748
llvm-svn: 344114
Summary:
Before, "[options] <inputs>" is unconditionally appended to the `Name` parameter. It is more flexible to change its semantic to `Usage` and let user customize the usage line.
% llvm-objcopy
...
USAGE: llvm-objcopy <input> [ <output> ] [options] <inputs>
With this patch:
% llvm-objcopy
...
USAGE: llvm-objcopy input [output]
Reviewers: rupprecht, alexshap, jhenderson
Reviewed By: rupprecht
Subscribers: jakehehrlich, mehdi_amini, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51009
llvm-svn: 344097
The IRBuilder CreateIntrinsic method wouldn't allow you to specify the
types that you wanted the intrinsic to be mangled with. To fix this
I've:
- Added an ArrayRef<Type *> member to both CreateIntrinsic overloads.
- Used that array to pass into the Intrinsic::getDeclaration call.
- Added a CreateUnaryIntrinsic to replace the most common use of
CreateIntrinsic where the type was auto-deduced from operand 0.
- Added a bunch more unit tests to test Create*Intrinsic calls that
weren't being tested (including the FMF flag that wasn't checked).
This was suggested as part of the AMDGPU specific atomic optimizer
review (https://reviews.llvm.org/D51969).
Differential Revision: https://reviews.llvm.org/D52087
llvm-svn: 343962
Symbols can be removed provided that all are present in the JITDylib and none
are currently in the materializing state. On success all requested symbols are
removed. On failure an error is returned and no symbols are removed.
llvm-svn: 343928
This small patch updates the CPU detection for Cavium processors when
-mcpu=native is passed on compile-line.
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D51939
llvm-svn: 343897
This adds the memory tagging extension, which is an optional extension
introduced in v8.5A. The new instructions and registers will be added by
subsequent patches.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52486
llvm-svn: 343563
Summary:
Reporting this as an error required stat()ing every file, as well as seeming
semantically questionable.
Reviewers: vsk, bkramer
Subscribers: mgrang, kristina, llvm-commits, liaoyuke
Differential Revision: https://reviews.llvm.org/D52648
llvm-svn: 343460
(1) Adds comments for the API.
(2) Removes the setArch method: This is redundant: the setArchStr method on the
triple should be used instead.
(3) Turns EmulatedTLS on by default. This matches EngineBuilder's behavior.
llvm-svn: 343423
Summary:
This CL allows constant vectors of floats to be recognized as non-NaN
and non-zero in select patterns. This change makes
`matchSelectPattern` more powerful generally, but was motivated
specifically because I wanted fminnan and fmaxnan to be created for
vector versions of the scalar patterns they are created for.
Tested with check-all on all targets. A testcase in the WebAssembly
backend that tests the non-nan codepath is in an upcoming CL.
Reviewers: aheejin, dschuff
Subscribers: sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52324
llvm-svn: 343364
The ARMTargetParser.def contains an entry for arm1176j-s which is the
default for the ArmV6K architecture. This cpu does not exist, there are
only arm1176jz-s and arm1176jzf-s and they are both architecture ArmV6KZ.
The only CPUs that are actually ArmV6K are the mpcore, mpcore_nofpu and
later revisions of the arm1136 family r1px (which we don't have a table
entry for).
This patch removes the arm1176j-s and makes mpcore the default for armv6k.
Differential Revision: https://reviews.llvm.org/D52594
llvm-svn: 343303
This adds two new system registers, used to generate random numbers.
This is an optional extension to v8.5-A, and will be controlled by the
"+rng" modifier of the -march= and -mcpu= options.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52481
llvm-svn: 343217
Debian uses different triples for MIPS r6 and paths. Here we use SubArch
to determine whether it is r6, if we found `r6' in CPU section of triple.
These new triples include:
mipsisa32r6-linux-gnu
mipsisa32r6el-linux-gnu
mipsisa64r6-linux-gnuabi64
mipsisa64r6el-linux-gnuabi64
mipsisa64r6-linux-gnuabin32
mipsisa64r6el-linux-gnuabin32
Patch by YunQiang Su.
Differential revision: https://reviews.llvm.org/D50857
llvm-svn: 343185
Explicitly defines ThreadSafeModule's move-assignment operator to move fields in
reverse order. This is required to ensure that the context field outlives the
module field.
llvm-svn: 343149
destroyed before its ThreadSharedContext.
Destroying the context first is an error if this ThreadSafeModule is the only
owner of its underlying context.
Add a unit test for ThreadSafeModule/ThreadSafeContext to catch this and other
basic usage issues.
llvm-svn: 343129
Summary:
THis is a backwards-compatible change (existing files will work as
expected).
See PR39082.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52546
llvm-svn: 343108
This patch allows targeting Armv8.5-A, adding the architecture to
tablegen and setting the options to be identical to Armv8.4-A for the
time being. Subsequent patches will add support for the different
features included in the Armv8.5-A Reference Manual.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52470
llvm-svn: 343102
implementation as lazy compile callbacks, and a "lazy re-exports" utility that
builds lazy call-throughs.
Lazy call-throughs are similar to lazy compile callbacks (and are based on the
same underlying state saving/restoring trampolines) but resolve their targets
by performing a standard ORC lookup rather than invoking a user supplied
compiler callback. This allows them to inherit the thread-safety of ORC lookups
while blocking only the calling thread (whereas compile callbacks also block one
compile thread).
Lazy re-exports provide a simple way of building lazy call-throughs. Unlike a
regular re-export, a lazy re-export generates a new address (a stub entry point)
that will act like the re-exported symbol when called. The first call via a
lazy re-export will trigger compilation of the re-exported symbol before calling
through to it.
llvm-svn: 343061
This will allow trampoline pools to be re-used for a new lazy-reexport utility
that generates looks up function bodies using the standard symbol lookup process
(rather than using a user provided compile function). This new utility provides
the same capabilities (since MaterializationUnits already allow user supplied
compile functions to be run) as JITCompileCallbackManager, but can use the new
asynchronous lookup functions to avoid blocking a compile thread.
This patch also updates createLocalCompileCallbackManager to return an error if
a callback manager can not be created, and updates clients of that API to
account for the change. Finally, the OrcCBindingsStack is updates so that if
a callback manager is not available for the target platform a valid stack
(without support for lazy compilation) can still be constructed.
llvm-svn: 343059
compilation of IR in the JIT.
ThreadSafeContext is a pair of an LLVMContext and a mutex that can be used to
lock that context when it needs to be accessed from multiple threads.
ThreadSafeModule is a pair of a unique_ptr<Module> and a
shared_ptr<ThreadSafeContext>. This allows the lifetime of a ThreadSafeContext
to be managed automatically in terms of the ThreadSafeModules that refer to it:
Once all modules using a ThreadSafeContext are destructed, and providing the
client has not held on to a copy of shared context pointer, the context will be
automatically destructed.
This scheme is necessary due to the following constraits: (1) We need multiple
contexts for multithreaded compilation (at least one per compile thread plus
one to store any IR not currently being compiled, though one context per module
is simpler). (2) We need to free contexts that are no longer being used so that
the JIT does not leak memory over time. (3) Module lifetimes are not
predictable (modules are compiled as needed depending on the flow of JIT'd
code) so there is no single point where contexts could be reclaimed.
JIT clients not using concurrency can safely use one ThreadSafeContext for all
ThreadSafeModules.
JIT clients who want to be able to compile concurrently should use a different
ThreadSafeContext for each module, or call setCloneToNewContextOnEmit on their
top-level IRLayer. The former reduces compile latency (since no clone step is
needed) at the cost of additional memory overhead for uncompiled modules (as
every uncompiled module will duplicate the LLVM types, constants and metadata
that have been shared).
llvm-svn: 343055
Summary: This is a NFC in preparation of exporting the initial registers as part of the YAML dump
Reviewers: courbet
Reviewed By: courbet
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52427
llvm-svn: 342967
In this patch, I'm adding an extra check to the Latch's terminator in llvm::UnrollRuntimeLoopRemainder,
similar to how it is already done in the llvm::UnrollLoop.
The compiler would crash if this function is called with a malformed loop.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D51486
llvm-svn: 342958
As a prerequisite to time-passes implementation which needs to time both passes
and analyses, adding instrumentation points to the Analysis Manager.
The are two functional differences between Pass and Analysis instrumentation:
- the latter does not increment pass execution counter
- it does not provide ability to skip execution of the corresponding analysis
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D51275
llvm-svn: 342778
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Made getName helper to return std::string (instead of StringRef initially) to fix
asan builtbot failures on CGSCC tests.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342664
Summary:
Added function to set a register to a particular value + tests.
Add EFLAGS test, use new setRegTo instead of setRegToConstant.
Reviewers: courbet, javed.absar
Subscribers: llvm-commits, tschuett, mgorny
Differential Revision: https://reviews.llvm.org/D52297
llvm-svn: 342644
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342597
Using LLVMTestingSupport in the LLVM_LINK_COMPONENTS breaks the build when
LLVM_TARGETS_TO_BUILD is set to empty.
Libraries that depend on LLVMTestingSupport need to use
target_link_libraries(<target> PRIVATE LLVMTestingSupport) instead.
This required change was already commited by r341899 to fix another build
issue.
This fixes rdar://problem/44615064.
llvm-svn: 342593
Summary:
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342544
Add a higher performance alternative to calling resize() every time which performs a lot of clearing to zero - when we're adding a single bit most of the time this will be completely unnecessary.
Differential Revision: https://reviews.llvm.org/D52236
llvm-svn: 342535
rL342465 is breaking the MSVC buildbots, but I need to revert this dependent revision as well.
Summary:
Added function to set a register to a particular value + tests.
Add EFLAGS test, use new setRegTo instead of setRegToConstant.
Reviewers: courbet, javed.absar
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51856
llvm-svn: 342489
Summary:
Added function to set a register to a particular value + tests.
Add EFLAGS test, use new setRegTo instead of setRegToConstant.
Reviewers: courbet, javed.absar
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51856
llvm-svn: 342466
Add support mips64(el)-linux-gnuabin32 triples, and set them to N32.
Debian architecture name mipsn32/mipsn32el are also added. Set
UseIntegratedAssembler for N32 if we can detect it.
Patch by YunQiang Su.
Differential revision: https://reviews.llvm.org/D51408
llvm-svn: 342416
Create a temporary file in the system temporary directory instead of creating a
file in the current directory, which may be not writable. (Fix for an issue
introduced in r342283.)
llvm-svn: 342386
Summary: This will be useful to generate many configurations and test instruction regimes (NaN, Inf, subnormal, normal).
Reviewers: courbet
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51858
llvm-svn: 342369
Before this fix, multiple invocations of testRoundTrip will create multiple
writers which share the same file as output destination. That could introduce
filesystem race issue when multiple subtests are executed concurrently. This
patch assign writers with different files as their output destinations.
llvm-svn: 342301
The patch saves a function offset table which maps function name index to the
offset of its function profile to the start of the binary profile. By using
the function offset table, for those function profiles which will not be used
when compiling a module, the profile reader does't have to read them. For
profile size around 10~20M, it saves ~10% compile time.
Differential Revision: https://reviews.llvm.org/D51863
llvm-svn: 342283
Using llvm::getInputFileDirectory() in unit tests is discouraged, so require an explicit opt-in.
This way, cmake also writes ~60 fewer unused files to disk.
Differential Revision: https://reviews.llvm.org/D52095
llvm-svn: 342248
Summary:
The hash computed for an ArrayType was different when first constructed
versus when later profiled due to the constructor default argument, and
we were not tracking constructor / destructor variant as part of the
mangled name AST, leading to incorrect equivalences.
Reviewers: erik.pilkington
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51463
llvm-svn: 342166
Summary:
The snippet-generation part goes to the SnippetGenerator class.
This will allow benchmarking arbitrary code (see PR38437).
Reviewers: gchatelet
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51979
llvm-svn: 342117
construction, a new convenience lookup method, and add-to layer methods.
ExecutionSession now creates a special 'main' JITDylib upon construction. All
subsequently created JITDylibs are added to the main JITDylib's search order by
default (controlled by the AddToMainDylibSearchOrder parameter to
ExecutionSession::createDylib). The main JITDylib's search order will be used in
the future to properly handle cross-JITDylib weak symbols, with the first
definition in this search order selected.
This commit also adds a new ExecutionSession::lookup convenience method that
performs a blocking lookup using the main JITDylib's search order, as this will
be a very common operation for clients.
Finally, new convenience overloads of IRLayer and ObjectLayer's add methods are
introduced that add the given program representations to the main dylib, which
is likely to be the common case.
llvm-svn: 342086
The previous implementation traversed all loop blocks and bailed if one
was not a latch block. Since we are only interested in latch blocks, we
should only traverse those.
llvm-svn: 341926
Summary:
This more correctly reflects the data written by the FDR mode runtime.
This is a continuation of the work in D50441.
Reviewers: mboerger, eizan
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51911
llvm-svn: 341905
Summary:
In this change, we implement a `BlockPrinter` which orders records in a
Block that's been indexed by the `BlockIndexer`. This is used in the
`llvm-xray fdr-dump` tool which ties together the various types and
utilities we've been working on, to allow for inspection of XRay FDR
mode traces both with and without verification.
This change is the final step of the refactoring of D50441.
Reviewers: mboerger, eizan
Subscribers: mgorny, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51846
llvm-svn: 341887
Summary:
End goal is to update MemorySSA in all loop passes. LoopUnswitch clones all blocks in a loop. SimpleLoopUnswitch clones some blocks. LoopRotate clones some instructions.
Some of these loop passes also make CFG changes.
This is an API based on what I found needed in LoopUnswitch, SimpleLoopUnswitch, LoopRotate, LoopInstSimplify, LoopSimplifyCFG.
Adding dependent patches using this API for context.
Reviewers: george.burgess.iv, dberlin
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D45299
llvm-svn: 341855
Summary:
This patch implements a `BlockVerifier` type which enforces the
invariants of the log structure of FDR mode logs on a per-block basis.
This ensures that the data we encounter from an FDR mode log
semantically correct (i.e. that records follow the documented "grammar"
for FDR mode log records).
This is another part of the refactoring of D50441.
This is a slightly modified version of rL341628, avoiding the
`std::tuple<...>` constructor that is not constexpr in C++11.
Reviewers: mboerger, eizan
Subscribers: mgorny, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51723
llvm-svn: 341769
Eugene Leviant