No test cases unfortunately as we do not yet generate isl_ast_op_and_then or
isl_ast_op_or_else. Those will be added in a later commit.
llvm-svn: 231268
When we generate code for a whole region we have to respect dominance
and update it too.
The first is achieved with multiple "BBMap"s. Each copied block in the
region gets its own map. It is initialized only with values mapped in
the immediate dominator block, if this block is in the region and was
therefor already copied. This way no values defined in a block that
doesn't dominate the current one will be used.
To update dominance information we check if the immediate dominator of
the original block we want to copy is in the region. If so we set the
immediate dominator of the current block to the copy of the immediate
dominator of the original block.
llvm-svn: 230774
After a function was created we will verify it for Debug builds. If
errors are found and debug-type equals "polly-codegen-isl" the SCoP,
the isl AST, the function as well as the errors will be printed.
llvm-svn: 230767
isl recently introduced a new interface to create run-time checks from
constraint sets. Use this interface to simplify our run-time check generation.
llvm-svn: 230640
This is the code generation for region statements that are created
when non-affine control flow was present in the input. A new
generator, similar to the block or vector generator, for regions is
used to traverse and copy the region statement and to adjust the
control flow inside the new region in the end.
llvm-svn: 230340
namespace and header rather than the top-level header and using
declarations. These helpers impede modular builds and are going away.
Migrating away from them will also be necessary to start mixing in any
usage of the new pass manager.
llvm-svn: 229091
This allows us to skip ast and code generation if we did not optimize
a SCoP and will not generate parallel or alias annotations. The
initial heuristic to exit is simple but allows improvements later on.
All failing test cases have been modified to disable early exit, thus
to keep their coverage.
Differential Revision: http://reviews.llvm.org/D7254
llvm-svn: 228851
This change has two main purposes:
1) We do not use a static interface to hide an object we create and
destroy for every basic block we copy.
2) We allow the BlockGenerator to store information between calls to
the copyBB method. This will ease scalar/phi code generation
later on.
While a lot of method signatures were changed this should not cause
any real behaviour change.
Differential Revision: http://reviews.llvm.org/D7467
llvm-svn: 228443
The support is currently limited as we only allow them in the input but do
not emit them in the transformed SCoP due to the possible semantic changes.
Differential Revision: http://reviews.llvm.org/D5225
llvm-svn: 227054
This change ensures that the values that represent the array size of a
multi-dimensional access are correctly sign-extended when used to compute a
memory address used in the run-time alias check.
To make the test case more readable, we name the instructions that we generate.
llvm-svn: 225818
We previously used a Twine here, but as pointed out by David Blaikie
and Mehdi Amini storing a temporary StringRef in a Twine is not a good
idea, as the StringRef will be freed before the Twine is used leaving
a Twine that points to uninitialized memory. We now make it explicit that
we use a StringRef here.
llvm-svn: 225342
Isl now specifically marks modulo operations that are compared against zero.
They can be implemented with the C/LLVM remainder operation.
We also update a couple of test cases where the output of isl has slightly
changed.
llvm-svn: 223607
This commit drops the Cloog support for Polly. The scripts and
documentation are changed to only use isl as prerequisity. In the code
all Cloog specific parts have been removed and all relevant tests have
been ported to the isl backend when it was created.
llvm-svn: 223141
SCEV based code generation has been the default for two weeks after having
been tested for a long time. We now drop the support the non-scev-based code
generation.
llvm-svn: 222978
SCEV based code generation allows Polly to detect and generate code for loops
that do not have an explicit induction variable, but only virtual induction
variables given by SCEV.
Being able to do so has two main benefits:
- We can detect more scops by default
- We require less canonicalization before Polly, which means we get closer
to our goal of not touching the IR before analyzing its properties.
Specifically, we do not need to run -polly-indvars to introduce explicit
canonical induction variables.
This switch became possible as both the isl code generation and -polly-parallel
are LNT error free with SCEV based code generation and the isl ast generator.
llvm-svn: 222113
Instead of parallelizing every parallel outermost loop, we now use a very
minimalistic cost model. Specifically, we assume innermost loops are not
worth parallelising and all non-innermost loops are.
When parallelizing all loops in LNT we got several slowdowns/timeouts due to
us parallelizing innermost loops that are executed only a couple of times
(number of iterations not known statically). With this basic heuristic enabled
LNT does not show any more timeouts, while several interesting loops are still
parallelized.
There are many ways to obtain an improved heuristic. Constructing such an
improvide heuristic from a position of minimal slow-down and zero code size
increase seems to be the best, as it allows us to track progress on LNT.
llvm-svn: 222096
This backend supports besides the classical code generation the upcoming SCEV
based code generation (which the existing CLooG backend does not support
robustly).
OpenMP code generation in the isl backend benefits from our run-time alias
checks such that the set of loops that can possibly be parallelized is a lot
larger.
The code was tested on LNT. We do not regress on builds without -polly-parallel.
When using -polly-parallel most tests work flawlessly, but a few issues still
remain and will be addressed in follow up commits.
SCEV/non-SCEV codegen:
- Compile time failure in ldecod and TimberWolfMC due a problem in our
run-time alias check generation triggered by pointers that escape through
the OpenMP subfunction (OpenMP specific).
- Several execution time failures. Due to the larger set of loops that we now
parallelize (compared to the classical code generation), we currently run
into some timeouts in tests with a lot loops that have a low trip count and
are slowed down by parallelizing them.
SCEV only:
- One existing failure in lencod due to llvm.org/PR21204 (not OpenMP specific)
OpenMP code generation is the last feature that was only available in the CLooG
backend. With the isl backend being the only one supporting features such as
run-time alias checks and delinearization, we will soon switch to use the isl
ast generator by the default and subsequently remove our dependency on CLooG.
http://reviews.llvm.org/D5517
llvm-svn: 222088
Polly was accidently modifying a debug info metadata node when
attempting to generate a new unique metadata node for the loop id.
The problem was that we had dwarf metadata that referred to a
metadata node with a null value, like this:
!6 = ... some dwarf metadata referring to !7 ...
!7 = {null}
When we attempt to generate a new metadata node, we reserve the
first space for self-referential node by setting the first argument
to null and then mutating the node later to refer to itself.
However, because the nodes are uniqued based on pointer values, when
we get the new metadata node it actually referred to an existing
node (!7 in the example). When we went to modify the metadata to
point to itself, we were accidently mutating the dwarf metatdata. We
ended up in this situation:
!6 = ... some dwarf metadata referring to !7 ...
!7 = {!7}
and this causes an assert when generating the debug info. The fix is
simple, we just need to use a unique value when getting a new
metadata node. The MDNode::getTemporary() provides exactly the API
we need (and it is used in clang to generate the unique nodes).
Differential Revision: http://reviews.llvm.org/D6174
llvm-svn: 221550
We introduces a new flag -polly-parallel and use it to annotate the for-nodes in
the isl ast that we want to execute thread parallel (e.g., using OpenMP). We
previously already emmitted openmp annotations, but we did this for various
kinds of parallel loops, including some which we can not run in parallel.
With this patch we now have three annotations:
1) #pragma known-parallel [reduction]
2) #pragma omp for
3) #pragma simd
meaning:
1) loop has no loop carried dependences
2) loop will be executed thread-parallel
3) loop can possibly be vectorized
This patch introduces 1) and reduces the use of 2) to only the cases where we
will actually generate thread parallel code.
It is in preparation of openmp code generation in our isl backend.
Legacy:
- We also have a command line option -enable-polly-openmp. This option controls
the OpenMP code generation in CLooG. It will become an alias of
-polly-parallel after the CLooG code generation has been dropped.
http://reviews.llvm.org/D6142
llvm-svn: 221479
This patch moves the SCEV based (re)generation of values before the checking for
scop-constant terms. It enables us to provide SCEV based replacements, which
are necessary to correctly generate OpenMP subfunctions when using the SCEV
based code generation.
When recomputing a new value for a value used in the code of the original scop,
we previously directly returned the same original value for all scop-constant
expressions without even trying to regenerate these values using our SCEV
expression. This is correct when the newly generated code remains fully in the
same function, however in case we want to outline parts of the newly generated
scop into subfunctions, this approach means we do not have any opportunity to
update these values in the SCEV based code generation. (In the non-SCEV based
code generation, we can provide such updates through the GlobalMap). To ensure
we have this opportunity, we first try to regenerate scalar terms with our SCEV
builder and will only return scop-constant expressions if SCEV based code
generation was not possible.
This change should not affect the results of the existing code generation
passes. It only impacts the upcoming OpenMP based code generation.
This commit also adds a test case. This test case passes before and after this
commit. It was added to ensure test coverage for the changed code.
llvm-svn: 221393
Tobias Grosser