Summary:
This code previously had a SmallVector of std::pairs containing an unsigned and another SmallVector. The outer vector was using the unsigned effectively as a key to decide which SmallVector to add into. So each time something new needed to be added the out vector needed to be scanned. If it wasn't found a new entry needed to be added to be added. This sounds very much like a map, but the next loop iterates over the outer vector to get a deterministic order.
We can simplify this code greatly if use SmallMapVector instead. This uses more stack space since we now have a vector and a map, but the searching and creating new entries all happens behind the scenes. It should also make the search more efficient though usually there are only a few entries so that doesn't matter much.
We could probably get determinism by just using std::map which would iterate over the unsigned key, but that would generate different output from what we get with the current implementation.
Reviewers: RKSimon, dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44711
llvm-svn: 328070
Both vectors contain unsigned so we can just use append to do the copying. Not only is this shorter, but it should be able to predict the final size and only grow the vector once if needed.
llvm-svn: 328033
Registers E[A-D]X, E[SD]I, E[BS]P, and EIP have 16-bit subregisters
that cover the low halves of these registers. This change adds artificial
subregisters for the high halves in order to differentiate (in terms of
register units) between the 32- and the low 16-bit registers.
This patch contains parts that aim to preserve the calculated register
pressure. This is in order to preserve the current codegen (minimize the
impact of this patch). The approach of having artificial subregisters
could be used to fix PR23423, but the pressure calculation would need
to be changed.
Differential Revision: https://reviews.llvm.org/D43353
llvm-svn: 328016
This is similar to the check later when we remap some of the instructions from one class to a new one. But if we reuse the class we don't get to do that check.
So many CPUs have violations of this check that I had to add a flag to the SchedMachineModel to allow it to be disabled. Hopefully we can get those cleaned up quickly and remove this flag.
A lot of the violations are due to overlapping regular expressions, but that's not the only kind of issue it found.
llvm-svn: 327808
X86 Supports Indirect Branch Tracking (IBT) as part of Control-Flow Enforcement Technology (CET).
IBT instruments ENDBR instructions used to specify valid targets of indirect call / jmp.
The `nocf_check` attribute has two roles in the context of X86 IBT technology:
1. Appertains to a function - do not add ENDBR instruction at the beginning of the function.
2. Appertains to a function pointer - do not track the target function of this pointer by adding nocf_check prefix to the indirect-call instruction.
This patch implements `nocf_check` context for Indirect Branch Tracking.
It also auto generates `nocf_check` prefixes before indirect branchs to jump tables that are guarded by range checks.
Differential Revision: https://reviews.llvm.org/D41879
llvm-svn: 327767
Remove the special casing for MRM_F8 by using HANDLE_OPTIONAL.
This should be NFC as the forms that were missing aren't used by any instructions today. They exist in the enum so that we didn't have to put them in one at a time when instructions are added. But looks like we failed here.
llvm-svn: 327298
With this patch, the tablegen 'SubtargetEmitter' always generates processor
resource names.
The impact of this patch on the code size of other llvm tools is small. I have
observed an average increase of 0.03% in code size when doing a release build of
LLVM (on windows, using MSVC) with all the default backends.
This change is done in preparation for the upcoming llvm-mca patch.
llvm-svn: 326993
The former simply makes more sense: we want to access the data here in
the backend, not information about the type.
More importantly, removing users of RecordRecTy::getRecord() allows us
more freedom to refactor the frontend.
Change-Id: Iee8905fd22cdb9b11c42ca03246c03d8fe4dd77f
llvm-svn: 326699
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
This patch changes GlobalISelEmitter to rank patterns similar to how the
DAG does it (ie it computes a score for a pattern and adds the added
complexity to it).
This is so that the decision tree for GISelSelector remains compatible
with that of SelectionDAG.
https://reviews.llvm.org/D43270
llvm-svn: 325401
Summary:
This patch makes the decoder understand old AMD 3DNow!
instructions that have never been properly supported in the X86
disassembler, despite being supported in other subsystems. Hopefully
this should make the X86 decoder more complete with respect to binaries
containing legacy code.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits, maksfb, bruno
Differential Revision: https://reviews.llvm.org/D43311
llvm-svn: 325295
Summary:
Right now using a ProcResource automatically counts as usage of all
super ProcResGroups. All this is done during codegen, so there is no
way for schedulers to get this information at runtime.
This adds the information of which individual ProcRes units are
contained in a ProcResGroup in MCProcResourceDesc.
Reviewers: gchatelet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43023
llvm-svn: 324582
Summary:
Right now only the ProcResourceUnits that are directly referenced by
instructions are emitted. This change emits all of them, so that
analysis passes can use the information.
This has no functional impact. It typically adds a few entries (e.g. 4
for X86/haswell) to the generated ProcRes table.
Reviewers: gchatelet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42903
llvm-svn: 324228
Summary:
This is a bit of a reimplementation the work done in
https://reviews.llvm.org/D41446, since that patch only really works for
tied operands of instructions, not aliases.
Instead of checking the constraints based on the matched instruction's opcode,
this patch uses the match-info's convert function to check the operand
constraints for that specific instruction/alias.
This is based on the matched operands for the instruction, not the
resulting opcode of the MCInst.
This patch adds the following enum/table to the *GenAsmMatcher.inc file:
enum {
Tie0_1_1,
Tie0_1_2,
Tie0_1_5,
...
};
const char TiedAsmOperandTable[][3] = {
/* Tie0_1_1 */ { 0, 1, 1 },
/* Tie0_1_2 */ { 0, 1, 2 },
/* Tie0_1_5 */ { 0, 1, 5 },
...
};
And it is referenced directly in the ConversionTable, like this:
static const uint8_t ConversionTable[CVT_NUM_SIGNATURES][13] = {
...
{ CVT_95_addRegOperands, 1,
CVT_95_addRegOperands, 2,
CVT_Tied, Tie0_1_5,
CVT_95_addRegOperands, 6, CVT_Done },
...
The Tie0_1_5 (and corresponding table) encodes that:
* Result operand 0 is the operand to copy (which is e.g. done when
building up the operands to the MCInst in convertToMCInst())
* Asm operands 1 and 5 should be the same operands (which is checked
in checkAsmTiedOperandConstraints()).
Reviewers: olista01, rengolin, fhahn, craig.topper, echristo, apazos, dsanders
Reviewed By: olista01
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42293
llvm-svn: 324196
Summary:
Apparently, we missed on constraining register classes of VReg-operands of all the instructions
built from a destination pattern but the root (top-level) one. The issue exposed itself
while selecting G_FPTOSI for armv7: the corresponding pattern generates VTOSIZS wrapped
into COPY_TO_REGCLASS, so top-level COPY_TO_REGCLASS gets properly constrained,
while nested VTOSIZS (or rather its destination virtual register to be exact) does not.
Fixing this by issuing GIR_ConstrainSelectedInstOperands for every nested GIR_BuildMI.
https://bugs.llvm.org/show_bug.cgi?id=35965
rdar://problem/36886530
Patch by Roman Tereshin
Reviewers: dsanders, qcolombet, rovka, bogner, aditya_nandakumar, volkan
Reviewed By: dsanders, qcolombet, rovka
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42565
llvm-svn: 323692
Collected statistics for the number of patterns emitted can be
incorrect because rules can be grouped if OptimizeMatchTable
is enabled. Increase the counter in RuleMatcher::emit(...)
to avoid that.
llvm-svn: 323391
This is a bit of a hack, but removes a cycle that broke modular builds
of LLVM. Of course the cycle is still there in form of a dependency
on the .def file.
llvm-svn: 323383
llvm::Regex is still the slowest regex engine on earth, running it over
all instructions on X86 takes a while. Extract a prefix and use a binary
search to reduce the search space before we resort to regex matching.
There are a couple of caveats here:
- The generic opcodes are outside of the sorted enum. They're handled in an extra loop.
- If there's a top-level bar we can't use the prefix trick.
- We bail on top-level ?. This could be handled, but it's rare.
This brings the time to generate X86GenInstrInfo.inc from 21s to 4.7s on
my machine.
llvm-svn: 323277
It appears that we haven't been prioritizing rules that contain nested
instructions properly. InstructionOperandMatcher didn't override
isHigherPriorityThan so it never compared the instructions/operands/predicates
inside nested instructions.
Fixes PR35926. Thanks to Diana Picus for the bug report.
llvm-svn: 322754
Summary:
This patch adds CustomRenderer which renders the matched
operands to the specified instruction.
Targets can enable the matching of SDNodeXForm by adding
a definition that inherits from GICustomOperandRenderer and
GISDNodeXFormEquiv as follows.
def gi_imm8 : GICustomOperandRenderer<"renderImm8”>,
GISDNodeXFormEquiv<imm8_xform>;
Custom renderer functions should be of the form:
void render(MachineInstrBuilder &MIB, const MachineInstr &I);
Reviewers: dsanders, ab, rovka
Reviewed By: dsanders
Subscribers: kristof.beyls, javed.absar, llvm-commits, mgrang, qcolombet
Differential Revision: https://reviews.llvm.org/D42012
llvm-svn: 322582
Prior to this we had a separate instruction and register class that excluded eax to prevent matching the instruction that would encode with 0x90.
This patch changes this to just use an InstAlias to force xchgl %eax, %eax to use XCHG32rr instruction in 64-bit mode. This gets rid of the separate instruction and register class.
llvm-svn: 322532
Summary:
This extends TableGen's AsmMatcherEmitter with code that generates
a table with tied-operand constraints. The constraints are checked
when parsing the instruction. If an operand is not equal to its tied operand,
the assembler will give an error.
Patch [2/3] in a series to add operand constraint checks for SVE's predicated ADD/SUB.
Reviewers: olista01, rengolin, mcrosier, fhahn, craig.topper, evandro, echristo
Reviewed By: fhahn
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D41446
llvm-svn: 322166
This patch improves diagnostic for case when mapped instruction
does not contain a field listed under RowFields.
Differential Revision: https://reviews.llvm.org/D41778
llvm-svn: 322004
This change deals with intrinsics with multiple outputs, for example load
instrinsic with address updated.
DAG selection for Instrinsics could be done either through source code or
tablegen. Handling all intrinsics in source code would introduce a huge chunk
of repetitive code if we have a large number of intrinsic that return multiple
values (see NVPTX as an example). While intrinsic class in tablegen supports
multiple outputs, tablegen only supports Intrinsics with zero or one output on
TreePattern. This appears to be a simple bug in tablegen that is fixed by this
change.
For Intrinsics defined as:
def int_xxx_load_addr_updated: Intrinsic<[llvm_i32_ty, llvm_ptr_ty], [llvm_ptr_ty, llvm_i32_ty], []>;
Instruction will be defined as:
def L32_X: Inst<(outs reg:$d1, reg:$d2), (ins reg:$s1, reg:$s2), "ld32_x $d1, $d2, $s2", [(set i32:$d1, i32:$d2, (int_xxx_load_addr_updated i32:$s1, i32:$s2))]>;
Patch by Wenbo Sun, thanks!
Differential Revision: https://reviews.llvm.org/D32888
llvm-svn: 321704
Allows preserving MachineMemOperands on intrinsics
through selection. For reasons I don't understand, this
is a static property of the pattern and the selector
deliberately goes out of its way to drop if not present.
Intrinsics already inherit from SDPatternOperator allowing
them to be used directly in instruction patterns. SDPatternOperator
has a list of SDNodeProperty, but you currently can't set them on
the intrinsic. Without SDNPMemOperand, when the node is selected
any memory operands are always dropped. Allowing setting this
on the intrinsics avoids needing to introduce another equivalent
target node just to have SDNPMemOperand set.
llvm-svn: 321212
NFC for currently supported targets. This resolves a problem encountered by
targets such as RISCV that reference `Subtarget` in ImmLeaf predicates.
llvm-svn: 321176
This patch resubmits the SVE ZIP1/ZIP2 patch series consisting of
of r320992, r320986, r320973, and r320970 by reverting
https://reviews.llvm.org/rL321024.
The issue that caused r321024 has been addressed in https://reviews.llvm.org/rL321158,
so this patch-series should be safe to resubmit.
llvm-svn: 321163
Between the creation of the last InstructionMatcher and the first
emission of the related Rule, we need to clear the internal map of IDs.
We used to do that right after the creation of the main
InstructionMatcher when building the rule and although that worked, this
is fragile because if for some reason some later code decides to create
more InstructionMatcher before the final call to emit, then the IDs
would be completely messed up.
Move that to the beginning of "emit" so that the IDs are guarantee to be
consistent.
NFC.
llvm-svn: 321053
Move InsnVarID and OpIdx at the beginning of the list of arguments
for all the constructors of the OperandMatcher subclasses.
This matches what we do for the InstructionMatcher.
NFC.
llvm-svn: 321031
In theory, reapplying optimizeRules on each group matchers should give
us a second nesting level on the matching table. In practice, we need
more work to make that happen because all the predicates are actually
not directly available through the predicate matchers list.
NFC.
llvm-svn: 321025
This reverts changes r320992, r320986, r320973, and r320970.
r320970 by itself breaks the test case, and the rest depend on it.
Test case will land soon.
llvm-svn: 321024
*** Context ***
Prior to this patchw, the table generated for matching instruction was
straight forward but highly inefficient.
Basically, each pattern generates its own set of self contained checks
and actions.
E.g., TableGen generated:
// First pattern
CheckNumOperand 3
CheckOpcode G_ADD
...
Build ADDrr
// Second pattern
CheckNumOperand 3
CheckOpcode G_ADD
...
Build ADDri
// Third pattern
CheckNumOperand 3
CheckOpcode G_SUB
...
Build SUBrr
*** Problem ***
Because of that generation, a *lot* of check were redundant between each
pattern and were checked every single time until we reach the pattern
that matches.
E.g., Taking the previous table, let say we are matching a G_SUB, that
means we were going to check all the rules for G_ADD before looking at
the G_SUB rule. In particular we are going to do:
check 3 operands; PASS
check G_ADD; FAIL
; Next rule
check 3 operands; PASS (but we already knew that!)
check G_ADD; FAIL (well it is still not true)
; Next rule
check 3 operands; PASS (really!!)
check G_SUB; PASS (at last :P)
*** Proposed Solution ***
This patch introduces a concept of group of rules (GroupMatcher) that
share some predicates and only get checked once for the whole group.
This patch only creates groups with one nesting level. Conceptually
there is nothing preventing us for having deeper nest level. However,
the current implementation is not smart enough to share the recording
(aka capturing) of values. That limits its ability to do more sharing.
For the given example the current patch will generate:
// First group
CheckOpcode G_ADD
// First pattern
CheckNumOperand 3
...
Build ADDrr
// Second pattern
CheckNumOperand 3
...
Build ADDri
// Second group
CheckOpcode G_SUB
// Third pattern
CheckNumOperand 3
...
Build SUBrr
But if we allowed several nesting level, it could create a sub group
for the checknumoperand 3.
(We would need to call optimizeRules on the rules within a group.)
*** Result ***
With only one level of nesting, the instruction selection pass is up
to 4x faster. For instance, one instruction now takes 500 checks,
instead of 24k! With more nesting we could get in the tens I believe.
Differential Revision: https://reviews.llvm.org/D39034
rdar://problem/34670699
llvm-svn: 321017
Summary: Patch [4/4] in a series to add parsing of predicates and properly parse SVE ZIP1/ZIP2 instructions. This patch further improves diagnostic messages for when the SVE feature is not specified.
Reviewers: rengolin, fhahn, olista01, echristo, efriedma
Reviewed By: fhahn
Subscribers: sdardis, aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40363
llvm-svn: 320992
Summary:
When emitting a diagnostic for an invalid operand, a specific diagnostic
should only be reported when the instruction being matched is actually
enabled by the feature flags.
Patch [3/4] in a series to add parsing of predicates and properly parse SVE
ZIP1/ZIP2 instructions. This patch fixes bogus diagnostic messages for when
the SVE feature is not specified.
Reviewers: rengolin, craig.topper, olista01, sdardis, stoklund
Reviewed By: olista01, sdardis
Subscribers: fhahn, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40362
llvm-svn: 320986
Prior to this patch, a predicate wouldn't make sense outside of its
rule. Indeed, it was only during emitting a rule that a predicate would
be made aware of the IDs of the data it is checking. Because of that,
predicates could not be moved around or compared between each other.
NFC.
llvm-svn: 320887
Summary:
The generated diagnostic by the AsmMatcher isn't always applicable to the AsmOperand.
This is because the code will only update the diagnostic if it is more
specific than the previous diagnostic. However, when having validated
operands and 'moved on' to a next operand (for some instruction/alias for
which all previous operands are valid), if the diagnostic is InvalidOperand,
than that should be set as the diagnostic, not the more specific message
about a previous operand for some other instruction/alias candidate.
(Re-committed with an extra whitespace in SVEInstrFormats.td to trigger rebuild
of AArch64GenAsmMatcher.inc, since the llvm-clang-x86_64-expensive-checks-win
builder does not seem to rebuild AArch64GenAsmMatcher.inc with the
newly built TableGen due to a missing dependency somewhere (see:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119555.html))
Reviewers: craig.topper, olista01, rengolin, stoklund
Reviewed By: olista01
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40011
llvm-svn: 320711
Most of the targets don't need the scheduler class enum.
I have an X86 scheduler model change that causes some names in the enum to become about 18000 characters long. This is because using instregex in scheduler models causes the scheduler class to get named with every instruction that matches the regex concatenated together. MSVC has a limit of 4096 characters for an identifier name. Rather than trying to come up with way to reduce the name length, I'm just going to sidestep the problem by not including the enum in X86.
llvm-svn: 320552
A number of architectures re-use the same register names (e.g. for both 32-bit
FPRs and 64-bit FPRs). They are currently unable to use the tablegen'erated
MatchRegisterName and MatchRegisterAltName, as tablegen (when built with
asserts enabled) will fail.
When the AllowDuplicateRegisterNames in AsmParser is set, duplicated register
names will be tolerated. A backend can then coerce registers to the desired
register class by (for instance) implementing validateTargetOperandClass.
At least the in-tree Sparc backend could benefit from this, as does RISC-V
(single and double precision floating point registers).
Differential Revision: https://reviews.llvm.org/D39845
llvm-svn: 320018
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
This is causing a failure in the llvm-clang-x86_64-expensive-checks-win
buildbot, and I can't reproduce it locally, so reverting until I can work out
what is wrong.
llvm-svn: 319654
This adds a "invalid operands for instruction" diagnostic for
instructions where there is an instruction encoding with the correct
mnemonic and which is available for this target, but where multiple
operands do not match those which were provided. This makes it clear
that there is some combination of operands that is valid for the current
target, which the default diagnostic of "invalid instruction" does not.
Since this is a very general error, we only emit it if we don't have a
more specific error.
Differential revision: https://reviews.llvm.org/D36747
llvm-svn: 319649
GIM_CheckNonAtomic has been replaced by GIM_CheckAtomicOrdering to allow it to support a wider
range of orderings. This has then been used to import patterns using nodes such
as atomic_cmp_swap, atomic_swap, and atomic_load_*.
llvm-svn: 319232
RecordKeeper::getDef() is a hot place, it shows up in profiling
and it creates std::string instance for each search in RecordMap
though RecordKeeper::RecordMap can use StringRef as a key
instead to avoid that. Patch do that change.
Differential revision: https://reviews.llvm.org/D40170
llvm-svn: 318822
When searching for a resource unit, use the reference location instead of
the definition location in case of an error.
Differential revision: https://reviews.llvm.org/D40263
llvm-svn: 318803
- We can still emit this error if the actual instruction has two or more
operands missing compared to the expected one.
- We should only emit this error once per instruction.
Differential revision: https://reviews.llvm.org/D36746
llvm-svn: 318770
This is NFC, as the matcher would continue looping up to the maximum
number of operands with no effect, but this should improve performance a
bit, and makes the debug trace clearer.
Differential revision: https://reviews.llvm.org/D36744
llvm-svn: 318769
Summary:
The generated diagnostic by the AsmMatcher isn't always applicable to the AsmOperand.
This is because the code will only update the diagnostic if it is more specific than the previous diagnostic. However, when having validated operands and 'moved on' to a next operand (for some instruction/alias for which all previous operands are valid), if the diagnostic is InvalidOperand, than that should be set as the diagnostic, not the more specific message about a previous operand for some other instruction/alias candidate.
Reviewers: craig.topper, olista01, rengolin, stoklund
Reviewed By: olista01
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40011
llvm-svn: 318759
Summary:
This patch fixes an issue so that the right alias is printed when the instruction has tied operands. It checks the number of operands in the resulting instruction as opposed to the alias, and then skips over tied operands that should not be printed in the alias.
This allows to generate the preferred assembly syntax for the AArch64 'ins' instruction, which should always be displayed as 'mov' according to the ARM Architecture Reference Manual. Several unit tests have changed as a result, but only to reflect the preferred disassembly. Some other InstAlias patterns (movk/bic/orr) needed a slight adjustment to stop them becoming the default and breaking other unit tests.
Please note that the patch is mostly the same as https://reviews.llvm.org/D29219 which was reverted because of an issue found when running TableGen with the Address Sanitizer. That issue has been addressed in this iteration of the patch.
Reviewers: rengolin, stoklund, huntergr, SjoerdMeijer, rovka
Reviewed By: rengolin, SjoerdMeijer
Subscribers: fhahn, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D40030
llvm-svn: 318650
ptypeN is functionally the same as typeN except that it informs the
SelectionDAG importer that an operand should be treated as a pointer even
if it was written as iN. This is important for patterns that use iN instead
of iPTR to represent pointers. E.g.:
(set GPR64:$dst, (load GPR64:$addr))
Previously, this was handled as a hardcoded special case for the appropriate
operands to G_LOAD and G_STORE.
llvm-svn: 318574
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
This is a tablegen backend to generate documentation for the opcodes that exist
for each target. For each opcode, it lists the assembly string, the names and
types of all operands, and the flags and predicates that apply to the opcode.
Differential revision: https://reviews.llvm.org/D31025
llvm-svn: 318155
Similar to r315841, GlobalISel and SelectionDAG require different code for the
common atomic predicates due to differences in the representation.
Even without that, differences in the IR (SDNode vs MachineInstr) require
differences in the C++ predicate.
This patch moves the implementation of the common atomic predicates related to
ordering into tablegen so that it can handle these differences.
It's NFC for SelectionDAG since it emits equivalent code and it's NFC for
GlobalISel since the rules involving the relevant predicates are still
rejected by the importer.
llvm-svn: 318102
Similar to r315841, GlobalISel and SelectionDAG require different code for the
common atomic predicates due to differences in the representation.
Even without that, differences in the IR (SDNode vs MachineInstr) require
differences in the C++ predicate.
This patch moves the implementation of the common atomic predicates related to
memory type into tablegen so that it can handle these differences.
It's NFC for SelectionDAG since it emits equivalent code and it's NFC for
GlobalISel since the rules involving the relevant predicates are still
rejected by the importer.
llvm-svn: 318095
Some alias instructions are printed with an extra space after the tab
character. Fix this by skipping that space when the tab character is printed
so that the instructions are aligned with the rest of the code.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D35946
llvm-svn: 318059
Allow a pattern rewriter to be installed in CodeGenDAGPatterns and use it to
correct situations where SelectionDAG and GlobalISel disagree on
representation. For example, it would rewrite:
(sextload:i32 $ptr)<<unindexedload>><<sextload>><<sextloadi16>
to:
(sext:i32 (load:i16 $ptr)<<unindexedload>>)
I'd have preferred to replace the fragments and have the expansion happen
naturally as part of PatFrag expansion but the type inferencing system can't
cope with loads of types narrower than those mentioned in register classes.
This is because the SDTCisInt's on the sext constrain both the result and
operand to the 'legal' integer types (where legal is defined as 'a register
class can contain the type') which immediately rules the narrower types out.
Several targets (those with only one legal integer type) would then go on to
crash on the SDTCisOpSmallerThanOp<> when it removes all the possible types
for the result of the extend.
Also, improve isObviouslySafeToFold() slightly to automatically return true for
neighbouring instructions. There can't be any re-ordering problems if
re-ordering isn't happenning. We'll need to improve it further to handle
sign/zero-extending loads when the extend and load aren't immediate neighbours
though.
llvm-svn: 317971
This patch adds the ability to include the member function declarations
in the instruction selector class separately from the member bodies.
Defining GET_DAGISEL_DECL macro to any value will only include the member
declarations. To include bodies, define GET_DAGISEL_BODY macro to be the
selector class name. Example:
class FooDAGToDAGISel : public SelectionDAGISel {
// Pull in declarations only.
#define GET_DAGISEL_DECL
#include "FooISelDAGToDAG.inc"
};
// Include the function bodies (with names qualified with the provided
// class name).
#define GET_DAGISEL_BODY FooDAGToDAGISel
#include "FooISelDAGToDAG.inc"
When neither of the two macros are defined, the function bodies are emitted
inline (in the same way as before this patch).
Differential Revision: https://reviews.llvm.org/D39596
llvm-svn: 317903
Patch [1/5] in a series to add assembler/disassembler support for AArch64 SVE
unpredicated ADD/SUB instructions.
Patch by Sander De Smalen.
Reviewed by: rengolin
Differential Revision: https://reviews.llvm.org/D39087
llvm-svn: 317564
The GlobalISel TableGen backend didn't check for predicates on the
source children. This caused it to generate code for ARM patterns such
as SMLABB or similar, but without properly checking for the sext_16_node
part of the operands. This in turn meant that we would select SMLABB
instead of MLA for simple sequences such as s32 + s32 * s32, which is
wrong (we want a MLA on the full operands, not just their bottom 16
bits).
This patch forces TableGen to skip patterns with predicates on the src
children, so it doesn't generate code for SMLABB and other similar ARM
instructions at all anymore. AArch64 and X86 are not affected.
Differential Revision: https://reviews.llvm.org/D39554
llvm-svn: 317313
Simon Pilgrim