by name by adding an extra parameter to the lldb_private::Target breakpoint
setting functions.
Added a function in the DWARF symbol file plug-in that can dump errors
and prints out which DWARF file the error is happening in so we can track
down what used to be assertions easily.
Fixed the MacOSX kernel plug-in to properly read the kext images and set
the kext breakpoint to watch for kexts as they are loaded.
llvm-svn: 134990
level is not eDescriptionLevelBrief. It broke test/TestAliases.py. Besides, to have a brief breakpoint list,
you can do "breakpoint list -b".
llvm-svn: 133455
like the doc's say it should. Make sure we have a condition before we set up a test whether
we have one, so we only present a "could not parse condition" error if we actually have a condition.
llvm-svn: 133088
of duplicated code from appearing all over LLDB:
lldb::addr_t
Process::ReadPointerFromMemory (lldb::addr_t vm_addr, Error &error);
bool
Process::WritePointerToMemory (lldb::addr_t vm_addr, lldb::addr_t ptr_value, Error &error);
size_t
Process::ReadScalarIntegerFromMemory (lldb::addr_t addr, uint32_t byte_size, bool is_signed, Scalar &scalar, Error &error);
size_t
Process::WriteScalarToMemory (lldb::addr_t vm_addr, const Scalar &scalar, uint32_t size, Error &error);
in lldb_private::Process the following functions were renamed:
From:
uint64_t
Process::ReadUnsignedInteger (lldb::addr_t load_addr,
size_t byte_size,
Error &error);
To:
uint64_t
Process::ReadUnsignedIntegerFromMemory (lldb::addr_t load_addr,
size_t byte_size,
uint64_t fail_value,
Error &error);
Cleaned up a lot of code that was manually doing what the above functions do
to use the functions listed above.
Added the ability to get a scalar value as a buffer that can be written down
to a process (byte swapping the Scalar value if needed):
uint32_t
Scalar::GetAsMemoryData (void *dst,
uint32_t dst_len,
lldb::ByteOrder dst_byte_order,
Error &error) const;
The "dst_len" can be smaller that the size of the scalar and the least
significant bytes will be written. "dst_len" can also be larger and the
most significant bytes will be padded with zeroes.
Centralized the code that adds or removes address bits for callable and opcode
addresses into lldb_private::Target:
lldb::addr_t
Target::GetCallableLoadAddress (lldb::addr_t load_addr, AddressClass addr_class) const;
lldb::addr_t
Target::GetOpcodeLoadAddress (lldb::addr_t load_addr, AddressClass addr_class) const;
All necessary lldb_private::Address functions now use the target versions so
changes should only need to happen in one place if anything needs updating.
Fixed up a lot of places that were calling :
addr_t
Address::GetLoadAddress(Target*);
to call the Address::GetCallableLoadAddress() or Address::GetOpcodeLoadAddress()
as needed. There were many places in the breakpoint code where things could
go wrong for ARM if these weren't used.
llvm-svn: 131878
StoppointLocation.h.
Added a new lldb_private::Address function:
addr_t
Address::GetOpcodeLoadAddress (Target *target) const;
This will strip any special bits from an address to make sure it is suitable
for use in addressing an opcode. Often ARM addresses have an extra bit zero
that can be set to indicate ARM vs Thumb addresses (gotten from return address
registers, or symbol addresses that may be marked up specially). We need to
strip these bits off prior to setting breakpoints, so we can centralized the
place to do this inside the Address class.
llvm-svn: 131658
set by default when dumping registers. If you want to see all of the register
sets you can use the "--all" option:
(lldb) register read --all
If you want to just see some register sets, you can currently specify them
by index:
(lldb) register read --set 0 --set 2
We need to get shorter register set names soon so we can specify the register
sets by name without having to type too much. I will make this change soon.
You can also have any integer encoded registers resolve the address values
back to any code or data from the object files using the "--lookup" option.
Below is sample output when stopped in the libc function "puts" with some
const strings in registers:
Process 8973 stopped
* thread #1: tid = 0x2c03, 0x00007fff828fa30f libSystem.B.dylib`puts + 1, stop reason = instruction step into
frame #0: 0x00007fff828fa30f libSystem.B.dylib`puts + 1
(lldb) register read --lookup
General Purpose Registers:
rax = 0x0000000100000e98 "----------------------------------------------------------------------"
rbx = 0x0000000000000000
rcx = 0x0000000000000001
rdx = 0x0000000000000000
rdi = 0x0000000100000e98 "----------------------------------------------------------------------"
rsi = 0x0000000100800000
rbp = 0x00007fff5fbff710
rsp = 0x00007fff5fbff280
r8 = 0x0000000000000040
r9 = 0x0000000000000000
r10 = 0x0000000000000000
r11 = 0x0000000000000246
r12 = 0x0000000000000000
r13 = 0x0000000000000000
r14 = 0x0000000000000000
r15 = 0x0000000000000000
rip = 0x00007fff828fa30f libSystem.B.dylib`puts + 1
rflags = 0x0000000000000246
cs = 0x0000000000000027
fs = 0x0000000000000000
gs = 0x0000000000000000
As we can see, we see two constant strings and the PC (register "rip") is
showing the code it resolves to.
I fixed the register "--format" option to work as expected.
Added a setting to disable skipping the function prologue when setting
breakpoints as a target settings variable:
(lldb) settings set target.skip-prologue false
Updated the user settings controller boolean value handler funciton to be able
to take the default value so it can correctly respond to the eVarSetOperationClear
operation.
Did some usability work on the OptionValue classes.
Fixed the "image lookup" command to correctly respond to the "--verbose"
option and display the detailed symbol context information when looking up
line table entries and functions by name. This previously was only working
for address lookups.
llvm-svn: 129977
platform status -- gets status information for the selected platform
platform create <platform-name> -- creates a new instance of a remote platform
platform list -- list all available platforms
platform select -- select a platform instance as the current platform (not working yet)
When using "platform create" it will create a remote platform and make it the
selected platform. For instances for iPhone OS debugging on Mac OS X one can
do:
(lldb) platform create remote-ios --sdk-version=4.0
Remote platform: iOS platform
SDK version: 4.0
SDK path: "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0"
Not connected to a remote device.
(lldb) file ~/Documents/a.out
Current executable set to '~/Documents/a.out' (armv6).
(lldb) image list
[ 0] /Volumes/work/gclayton/Documents/devb/attach/a.out
[ 1] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/dyld
[ 2] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/libSystem.B.dylib
Note that this is all happening prior to running _or_ connecting to a remote
platform. Once connected to a remote platform the OS version might change which
means we will need to update our dependecies. Also once we run, we will need
to match up the actualy binaries with the actualy UUID's to files in the
SDK, or download and cache them locally.
This is just the start of the remote platforms, but this modification is the
first iteration in getting the platforms really doing something.
llvm-svn: 127934
lldb_private::Function objects. Previously the SymbolFileSymtab subclass
would return lldb_private::Symbol objects when it was asked to find functions.
The Module::FindFunctions (...) now take a boolean "bool include_symbols" so
that the module can track down functions and symbols, yet functions are found
by the SymbolFile plug-ins (through the SymbolVendor class), and symbols are
gotten through the ObjectFile plug-ins.
Fixed and issue where the DWARF parser might run into incomplete class member
function defintions which would make clang mad when we tried to make certain
member functions with invalid number of parameters (such as an operator=
operator that had no parameters). Now we just avoid and don't complete these
incomplete functions.
llvm-svn: 124359
by LLDB. Instead of being materialized into the input structure
passed to the expression, variables are left in place and pointers
to them are materialzied into the structure. Variables not resident
in memory (notably, registers) get temporary memory regions allocated
for them.
Persistent variables are the most complex part of this, because they
are made in various ways and there are different expectations about
their lifetime. Persistent variables now have flags indicating their
status and what the expectations for longevity are. They can be
marked as residing in target memory permanently -- this is the
default for result variables from expressions entered on the command
line and for explicitly declared persistent variables (but more on
that below). Other result variables have their memory freed.
Some major improvements resulting from this include being able to
properly take the address of variables, better and cleaner support
for functions that return references, and cleaner C++ support in
general. One problem that remains is the problem of explicitly
declared persistent variables; I have not yet implemented the code
that makes references to them into indirect references, so currently
materialization and dematerialization of these variables is broken.
llvm-svn: 123371
ModuleList so they don't show up in the images. Breakpoint locations that are
in shared libraries that get unloaded will persist though so that if you
have plug-ins that load/unload and you have a breakpoint set on functions
in the plug-ins, the hit counts will persist between loads/unloads.
llvm-svn: 121069
that the result of an expression should be coerced to
a specific type. Also made breakpoint conditions pass
in the bool type for this type.
The expression parser ignores this indication for now.
llvm-svn: 119779
by being able to get the data count and data. Each thread stop reason
has one or more data words that can help describe the stop. To do this
I added:
size_t
SBThread::GetStopReasonDataCount();
uint64_t
SBThread::GetStopReasonDataAtIndex(uint32_t idx);
llvm-svn: 119720
breakpoints on inlined functions by name. This involved fixing the DWARF parser
to correctly back up and parse the concrete function when we find inlined
functions by name, then grabbing any appropriate inlined blocks and returning
symbol contexts with the block filled in. After this was fixed, the breakpoint
by name resolver needed to correctly deal with symbol contexts that had the
inlined block filled in in the symbol contexts.
llvm-svn: 119017
don't crash if we disable logging when some code already has a copy of the
logger. Prior to this fix, logs were handed out as pointers and if they were
held onto while a log got disabled, then it could cause a crash. Now all logs
are handed out as shared pointers so this problem shouldn't happen anymore.
We are also using our new shared pointers that put the shared pointer count
and the object into the same allocation for a tad better performance.
llvm-svn: 118319
than just the entire log channel.
Add checks, where appropriate, to make sure a log channel/category has
not been disabled before attempting to write to it.
llvm-svn: 117715
which holds the name of a file whose contents are
prefixed to each expression. For example, if the file
~/lldb.prefix.header contains:
typedef unsigned short my_type;
then you can do this:
(lldb) settings set target.expr-prefix '~/lldb.prefix.header'
(lldb) expr sizeof(my_type)
(unsigned long) $0 = 2
When the variable is changed, the corresponding file
is loaded and its contents are fetched into a string
that is stored along with the target. This string
is then passed to each expression and inserted into
it during parsing, like this:
typedef unsigned short my_type;
void
$__lldb_expr(void *$__lldb_arg)
{
sizeof(my_type);
}
llvm-svn: 117627
the breakpoint associated with the (filename, line_number) combo when an arrow is pointing to
a source position using Emacs Grand Unified Debugger library to interact with lldb.
The current implmentation is insufficient in that it only asks the breakpoint whether it is
associated with a breakpoint resolver with FileLine type and whether it matches the (filename, line_number)
combo. There are other breakpoint resolver types whose breakpoint locations can potentially
match the (filename, line_number) combo.
The BreakpointResolver, BreakpointResolverName, BreakpointResolverAddress, and BreakpointResolverFileLine
classes have extra static classof methods to support LLVM style type inquiry through isa, cast, and dyn_cast.
The Breakpoint class has an API method bool GetMatchingFileLine(...) which is invoked from CommandObjectBreak.cpp
to implement the "breakpoint clear" command.
llvm-svn: 117562
function. It will inspect NAME and do the following:
- if the name contains '(' or starts with "-[" or "+[" then a full name search
will happen to match full function names with args (C++ demangled names) or
full objective C method prototypes.
- if the name contains "::" and no '(', then it is assumed to be a qualified
function name that is in a namespace or class. For "foo::bar::baz" we will
search for any functions with the basename or method name of "baz", then
filter the results to only those that contain "foo::bar::baz". This allows
setting breakpoint on C++ functions and methods without having to fully
qualify all of the types that would appear in C++ mangled names.
- if the name contains ":" (not "::"), then NAME is assumed to be an ObjC
selector.
_ otherwise, we assume just a plain function basename.
Now that "--name" is our "auto" mode, I introduced the new "--basename" option
("breakpoint set --basename NAME") to allow for function names that aren't
methods or selectors, just basenames. This can also be used to ignore C++
namespaces and class hierarchies for class methods.
Fixed clang enumeration promotion types to be correct.
llvm-svn: 116293
crossing major breakpoint boundaries (must be within a single breakpoint if specifying locations).
Add .* as a means of specifying all the breakpoint locations under a major breakpoint, e.g. "3.*"
means "all the breakpoint locations of breakpoint 3".
Fix error message to make more sense, if user attempts to specify a breakpoint command when there
isn't a target yet.
llvm-svn: 115077
Added extra logging for stepping.
Fixed an issue where cached stack frame data could be lost between runs when
the thread plans read a stack frame.
llvm-svn: 112973
might dump file paths that allows the dumping of full paths or just the
basenames. Switched the stack frame dumping code to use just the basenames for
the files instead of the full path.
Modified the StackID class to no rely on needing the start PC for the current
function/symbol since we can use the SymbolContextScope to uniquely identify
that, unless there is no symbol context scope. In that case we can rely upon
the current PC value. This saves the StackID from having to calculate the
start PC when the StackFrame::GetStackID() accessor is called.
Also improved the StackID less than operator to correctly handle inlined stack
frames in the same stack.
llvm-svn: 112867
which is now on by default. Frames are gotten from the unwinder as concrete
frames, then if inline frames are to be shown, extra information to track
and reconstruct these frames is cached with each Thread and exanded as needed.
I added an inline height as part of the lldb_private::StackID class, the class
that helps us uniquely identify stack frames. This allows for two frames to
shared the same call frame address, yet differ only in inline height.
Fixed setting breakpoint by address to not require addresses to resolve.
A quick example:
% cat main.cpp
% ./build/Debug/lldb test/stl/a.out
Current executable set to 'test/stl/a.out' (x86_64).
(lldb) breakpoint set --address 0x0000000100000d31
Breakpoint created: 1: address = 0x0000000100000d31, locations = 1
(lldb) r
Launching 'a.out' (x86_64)
(lldb) Process 38031 Stopped
* thread #1: tid = 0x2e03, pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_data() const at /usr/include/c++/4.2.1/bits/basic_string.h:280, stop reason = breakpoint 1.1, queue = com.apple.main-thread
277
278 _CharT*
279 _M_data() const
280 -> { return _M_dataplus._M_p; }
281
282 _CharT*
283 _M_data(_CharT* __p)
(lldb) bt
thread #1: tid = 0x2e03, stop reason = breakpoint 1.1, queue = com.apple.main-thread
frame #0: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_data() const at /usr/include/c++/4.2.1/bits/basic_string.h:280
frame #1: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_rep() const at /usr/include/c++/4.2.1/bits/basic_string.h:288
frame #2: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::size() const at /usr/include/c++/4.2.1/bits/basic_string.h:606
frame #3: pc = 0x0000000100000d31, where = a.out`main [inlined] operator<< <char, std::char_traits<char>, std::allocator<char> > at /usr/include/c++/4.2.1/bits/basic_string.h:2414
frame #4: pc = 0x0000000100000d31, where = a.out`main + 33 at /Volumes/work/gclayton/Documents/src/lldb/test/stl/main.cpp:14
frame #5: pc = 0x0000000100000d08, where = a.out`start + 52
Each inline frame contains only the variables that they contain and each inlined
stack frame is treated as a single entity.
llvm-svn: 111877
This will allow debugger plug-ins to make any instance of "lldb_private::StopInfo"
that can completely describe any stop reason. It also provides a framework for
doing intelligent things with the stop info at important times in the lifetime
of the inferior.
Examples include the signal stop info in StopInfoUnixSignal. It will check with
the process to see that the current action is for the signal. These actions
include wether to stop for the signal, wether the notify that the signal was
hit, and wether to pass the signal along to the inferior process. The
StopInfoUnixSignal class overrides the "ShouldStop()" method of StopInfo and
this allows the stop info to determine if it should stop at the signal or
continue the process.
StopInfo subclasses must override the following functions:
virtual lldb::StopReason
GetStopReason () const = 0;
virtual const char *
GetDescription () = 0;
StopInfo subclasses can override the following functions:
// If the subclass returns "false", the inferior will resume. The default
// version of this function returns "true" which means the default stop
// info will stop the process. The breakpoint subclass will check if
// the breakpoint wants us to stop by calling any installed callback on
// the breakpoint, and also checking if the breakpoint is for the current
// thread. Signals will check if they should stop based off of the
// UnixSignal settings in the process.
virtual bool
ShouldStop (Event *event_ptr);
// Sublasses can state if they want to notify the debugger when "ShouldStop"
// returns false. This would be handy for breakpoints where you want to
// log information and continue and is also used by the signal stop info
// to notify that a signal was received (after it checks with the process
// signal settings).
virtual bool
ShouldNotify (Event *event_ptr)
{
return false;
}
// Allow subclasses to do something intelligent right before we resume.
// The signal class will figure out if the signal should be propagated
// to the inferior process and pass that along to the debugger plug-ins.
virtual void
WillResume (lldb::StateType resume_state)
{
// By default, don't do anything
}
The support the Mach exceptions was moved into the lldb/source/Plugins/Process/Utility
folder and now doesn't polute the lldb_private::Thread class with platform
specific code.
llvm-svn: 110184
enabled LLVM make style building and made this compile LLDB on Mac OS X. We
can now iterate on this to make the build work on both linux and macosx.
llvm-svn: 108009
intelligently. The four name types we currently have are:
eFunctionNameTypeFull = (1 << 1), // The function name.
// For C this is the same as just the name of the function
// For C++ this is the demangled version of the mangled name.
// For ObjC this is the full function signature with the + or
// - and the square brackets and the class and selector
eFunctionNameTypeBase = (1 << 2), // The function name only, no namespaces or arguments and no class
// methods or selectors will be searched.
eFunctionNameTypeMethod = (1 << 3), // Find function by method name (C++) with no namespace or arguments
eFunctionNameTypeSelector = (1 << 4) // Find function by selector name (ObjC) names
this allows much more flexibility when setting breakoints:
(lldb) breakpoint set --name main --basename
(lldb) breakpoint set --name main --fullname
(lldb) breakpoint set --name main --method
(lldb) breakpoint set --name main --selector
The default:
(lldb) breakpoint set --name main
will inspect the name "main" and look for any parens, or if the name starts
with "-[" or "+[" and if any are found then a full name search will happen.
Else a basename search will be the default.
Fixed some command option structures so not all options are required when they
shouldn't be.
Cleaned up the breakpoint output summary.
Made the "image lookup --address <addr>" output much more verbose so it shows
all the important symbol context results. Added a GetDescription method to
many of the SymbolContext objects for the more verbose output.
llvm-svn: 107075
to the debugger from GUI windows. Previously there was one global debugger
instance that could be accessed that had its own command interpreter and
current state (current target/process/thread/frame). When a GUI debugger
was attached, if it opened more than one window that each had a console
window, there were issues where the last one to setup the global debugger
object won and got control of the debugger.
To avoid this we now create instances of the lldb_private::Debugger that each
has its own state:
- target list for targets the debugger instance owns
- current process/thread/frame
- its own command interpreter
- its own input, output and error file handles to avoid conflicts
- its own input reader stack
So now clients should call:
SBDebugger::Initialize(); // (static function)
SBDebugger debugger (SBDebugger::Create());
// Use which ever file handles you wish
debugger.SetErrorFileHandle (stderr, false);
debugger.SetOutputFileHandle (stdout, false);
debugger.SetInputFileHandle (stdin, true);
// main loop
SBDebugger::Terminate(); // (static function)
SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to
ensure nothing gets destroyed too early when multiple clients might be
attached.
Cleaned up the command interpreter and the CommandObject and all subclasses
to take more appropriate arguments.
llvm-svn: 106615
than picking bits out of the breakpoint options. Added BreakpointOptions::GetDescription to do this job. Some more mucking
around to keep the breakpoint listing from getting too verbose.
llvm-svn: 106262
Push this through all the breakpoint management code. Allow this to be set when the breakpoint is created.
Fix the Process classes so that a breakpoint hit that is not for a particular thread is not reported as a
breakpoint hit event for that thread.
Added a "breakpoint configure" command to allow you to reset any of the thread
specific options (or the ignore count.)
llvm-svn: 106078
BreakpointLocation::GetLoadAddress() does not match the 'StoppointLocation::GetLoadAddress() const' virtual function prototype, and so, does not override the superclass function.
llvm-svn: 105927
Greg Clayton