vldr.64 d1, [r0, #-32]
The problem was with how the addressing mode 5 encodes the offsets. This change
makes sure that the way offsets are handled in addressing mode 5 is consistent
throughout the MC code. It involves re-refactoring the "getAddrModeImmOpValue"
method into an "Imm12" and "addressing mode 5" version. But not to worry! The
majority of the duplicated code has been unified.
llvm-svn: 118144
1. Fix pre-ra scheduler so it doesn't try to push instructions above calls to
"optimize for latency". Call instructions don't have the right latency and
this is more likely to use introduce spills.
2. Fix if-converter cost function. For ARM, it should use instruction latencies,
not # of micro-ops since multi-latency instructions is completely executed
even when the predicate is false. Also, some instruction will be "slower"
when they are predicated due to the register def becoming implicit input.
rdar://8598427
llvm-svn: 118135
with immediates up to 16-bits in size. The same logic is applied to other LDR
encodings, e.g. VLDR, but which use a different immediate bit width (8-bits in
VLDR's case). Removing the "12" allows it to be more generic.
llvm-svn: 118094
at more than those which define CPSR. You can have this situation:
(1) subs ...
(2) sub r6, r5, r4
(3) movge ...
(4) cmp r6, 0
(5) movge ...
We cannot convert (2) to "subs" because (3) is using the CPSR set by
(1). There's an analogous situation here:
(1) sub r1, r2, r3
(2) sub r4, r5, r6
(3) cmp r4, ...
(5) movge ...
(6) cmp r1, ...
(7) movge ...
We cannot convert (1) to "subs" because of the intervening use of CPSR.
llvm-svn: 117950
aliases installed and working. They now work when the
matched pattern and the result instruction have exactly
the same operand list.
This is now enough for us to define proper aliases for
movzx and movsx, implementing rdar://8017633 and PR7459.
Note that we do not accept instructions like:
movzx 0(%rsp), %rsi
GAS accepts this instruction, but it doesn't make any
sense because we don't know the size of the memory
operand. It could be 8/16/32 bits.
llvm-svn: 117901
in their asmstring. Fix the two x86 "NOREX" instructions that have them.
If these comments are important, the instlowering stuff can print them.
llvm-svn: 117897
consider it to be readonly. In fact, don't even consider it to be
readonly if it does a volatile load from an AllocaInst either (it
is debatable as to whether readonly would be correct or not in this
case; play safe for the moment). This fixes PR8279.
llvm-svn: 117783
There were a number of issues to fix up here:
* The "device" argument of the llvm.memory.barrier intrinsic should be
used to distinguish the "Full System" domain from the "Inner Shareable"
domain. It has nothing to do with using DMB vs. DSB instructions.
* The compiler should never need to emit DSB instructions. Remove the
ARMISD::SYNCBARRIER node and also remove the instruction patterns for DSB.
* Merge the separate DMB/DSB instructions for options only used for the
disassembler with the default DMB/DSB instructions. Add the default
"full system" option ARM_MB::SY to the ARM_MB::MemBOpt enum.
* Add a separate ARMISD::MEMBARRIER_MCR node for subtargets that implement
a data memory barrier using the MCR instruction.
* Fix up encodings for these instructions (except MCR).
I also updated the tests and added a few new ones to check for DMB options
that were not currently being exercised.
llvm-svn: 117756
just
.type foo,@object
will produce an undefined reference to foo. On the other hand, a file with
just
.weakref bar, foo
will not. It is somewhat hard to support both in MC since both statements
should create the symbols. It should be possible if we really need to by
adding to the flags, but hopefully that is not necessary.
With this patch we do not produce a undefined reference in any of those cases.
The assembly file needs an actual use for the undefined reference to be
present.
This is in preparation for a patch implementing .weakref.
llvm-svn: 117735
This code had previously used 2*N, where N is the mask length, to represent
undef. That is not safe because the shufflevector operands may have more
than N elements -- they don't have to match the result type.
llvm-svn: 117721
Allow splats even if they don't match either of the original shuffles,
possibly due to undef entries in the shuffles masks. Radar 8597790.
Also fix some 80-column violations.
llvm-svn: 117719
operand and one of them has a single use that is a live out copy, favor the
one that is live out. Otherwise it will be difficult to eliminate the copy
if the instruction is a loop induction variable update. e.g.
BB:
sub r1, r3, #1
str r0, [r2, r3]
mov r3, r1
cmp
bne BB
=>
BB:
str r0, [r2, r3]
sub r3, r3, #1
cmp
bne BB
This fixed the recent 256.bzip2 regression.
llvm-svn: 117675
With Python-2.4, Reader::read64 always returns (unexpected) long integer.
FileCheck detects failure on test/MC/MachO among '0' and '0L'.
CentOS5(aka RHEL5 clone) provides python-2.4.
llvm-svn: 117637
* If we have a M or a G, reject sections without the type
* Only parse the flag specific arguments if we have M or G
* Parse the corresponding arguments for M and G
We ignore the G arguments and flag for now.
llvm-svn: 117608
- For now, loads of [r, r] addressing mode is the same as the
[r, r lsl/lsr/asr #] variants. ARMBaseInstrInfo::getOperandLatency() should
identify the former case and reduce the output latency by 1.
- Also identify [r, r << 2] case. This special form of shifter addressing mode
is "free".
llvm-svn: 117519
elements than the result vector type. So, when an instruction like:
%8 = shufflevector <2 x float> %4, <2 x float> %7, <4 x i32> <i32 1, i32 0, i32 3, i32 2>
is translated to a DAG, each operand is changed to a concat_vectors node that appends 2 undef elements. That is:
shuffle [a,b], [c,d] is changed to:
shuffle [a,b,u,u], [c,d,u,u]
That's probably the right thing for x86 but for NEON, we'd much rather have:
shuffle [a,b,c,d], undef
Teach the DAG combiner how to do that transformation for ARM. Radar 8597007.
llvm-svn: 117482
sense, when the instruction takes the 16-bit ax register or m16 memory
location. These changes to llvm-mc matches what the darwin assembler
allows for these instructions. Done differently than in r117031 that
caused a valgrind error which was later reverted.
llvm-svn: 117433
The SPU ABI does not mention v64, and all examples
in C suggest v128 are treated similarily to arrays,
we use array alignment for v64 too. This makes the
alignment of e.g. [2 x <2 x i32>] behave "intuitively"
and similar to as if the elements were e.g. i32s.
This also makes an "unaligned store" test to be
aligned, with different (but functionally equivalent)
code generated.
llvm-svn: 117360
do not double-count the duplicate instructions by counting once from the
beginning and again from the end. Keep track of where the duplicates from
the beginning ended and don't go past that point when counting duplicates
at the end. Radar 8589805.
This change causes one of the MC/ARM/simple-fp-encoding tests to produce
different (better!) code without the vmovne instruction being tested.
I changed the test to produce vmovne and vmoveq instructions but moving
between register files in the opposite direction. That's not quite the same
but predicated versions of those instructions weren't being tested before,
so at least the test coverage is not any worse, just different.
llvm-svn: 117333
it isn't unreachable and should not be zapped. The check for the entry block
was missing in one case: a block containing a unwind instruction. While there,
do some small cleanups: "M" is not a great name for a Function* (it would be
more appropriate for a Module*), change it to "Fn"; use Fn in more places.
llvm-svn: 117224
weren't properly reflecting the OperandSize attribute
of the instruction leading to improper decoding of
certain instructions with the 66H prefix. Also added
a test case for this.
llvm-svn: 117084
sense, when the instruction takes the 16-bit ax register or m16 memory
location. These changes to llvm-mc matches what the darwin assembler allows
for these instructions. Also added the missing flex (without the wait prefix)
and ud2a as an alias to ud2 (still to add ud2b).
llvm-svn: 117031
1. A delay slot filler that searches for valid instructions
to fill the delay slot with. Previously NOPs would always
be inserted into delay slots.
2. Support for MC based instruction printer added.
3. Support for MC based machine code generation and ELF
file generation. ELF file generation does not yet
completely work as much of the ELF support infrastructure
is still x86/x86-64 specific.
4. General clean up of the MBlaze backend code. Much of the
tablegen code has been cleanup and simplified.
Bug Fixes:
1. Removed duplicate periods from subtarget feature descriptions.
2. Many of the instructions had bad machine code information
in the tablegen files. Much of this has been fixed.
llvm-svn: 116986
- Initial register pressure in the loop should be all the live defs into the
loop. Not just those from loop preheader which is often empty.
- When an instruction is hoisted, update register pressure from loop preheader
to the original BB.
- Treat only use of a virtual register as kill since the code is still SSA.
llvm-svn: 116956
The failures in r116753 r116756 were caused by a python issue -
Python likes to append 'L' suffix to stringified numbers if the number
is larger than a machine int. Unfortunately, this causes a divergence of
behavior between 32 and 64 bit python versions.
I re-crafted elf-dump/common_dump to take care of these issues by:
1. always printing 0x (makes for easy sed/regex)
2. always print fixed length (exactly 2 + numBits/4 digits long)
by mod ((2^numBits) - 1)
3. left-padded with '0'
There is a residual common routine that is also used by
macho-dump (dataToHex) , so I left the 'section_data' test values alone.
llvm-svn: 116823
"long latency" enough to hoist even if it may increase spilling. Reloading
a value from spill slot is often cheaper than performing an expensive
computation in the loop. For X86, that means machine LICM will hoist
SQRT, DIV, etc. ARM will be somewhat aggressive with VFP and NEON
instructions.
- Enable register pressure aware machine LICM by default.
llvm-svn: 116781
word forms and suffixed versions to match the darwin assembler in 32-bit and
64-bit modes. This is again for use just with assembly source for llvm-mc .
llvm-svn: 116773
does normal initialization and normal chaining. Change the default
AliasAnalysis implementation to NoAlias.
Update StandardCompileOpts.h and friends to explicitly request
BasicAliasAnalysis.
Update tests to explicitly request -basicaa.
llvm-svn: 116720
be more complete. These are only expected to be used by llvm-mc with assembly
source so there is no pattern, [], in the .td files. Most are being added to
X86InstrInfo.td as Chris suggested and only comments about register uses are
added. Suggestions welcome on the .td changes as I'm not sure on every detail
of the x86 records. More missing instructions will be coming.
llvm-svn: 116716
The old algorithm inserted a 'rotqmbyi' instruction which was
both redundant and wrong - it made shufb select bytes from the
wrong end of the input quad.
llvm-svn: 116701
Dale Johannesen