This code was doing the right thing for the iOS simulator, but not other simulator platforms
Fix it by making the warning not happen for all platforms whose name ends in "-simulator"
Since this code lives in AppleObjCRuntimeV2.cpp, this already only applies to Apple platforms by definition, so I am not too worried about conflicts with other vendors
llvm-svn: 261165
process in the incoming value be non-null, but Value Objects created off the target
don't necessarily have a process. In that case, having the targets the same is good
enough.
<rdar://problem/24097805>
llvm-svn: 257234
Summary:
This is a resubmission of r252179, but correctly ignores the source
files for other platforms.
Reviewers: granata.enrico, tberghammer, zturner, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14389
llvm-svn: 252205
Summary:
This short-circuits the GetObjCVersion function to avoid iterating through target modules on
non-apple targets. This function is called on every Process::IsDynamicValue call, so this
overhead is not negligible.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13948
llvm-svn: 251004
There are still a bunch of dependencies on the plug-in, but this helps to
identify them.
There are also a few more bits we need to move (and abstract, for example the
ClangPersistentVariables).
llvm-svn: 248612
This is meant to cover cases such as the obvious
Base *base = new Derived();
where GetDynamicTypeAndAddress(base) would return the type "Derived", not "Derived *"
llvm-svn: 248315
For C++ and ObjC, dynamic values are always (at least somewhat) pointer-like in nature, so a ValueType of scalar is actually good enough that it could originally be hardcoded as the right choice
Other languages, might have broader notions of things that are dynamic (e.g. a language where a value type can be dynamic). In those cases, it might actually be the case that a dynamic value is a pointer-to the data, or even a host address if dynamic expression results entirely in host space are being talked about
This patch enables the language runtime to make that decision, and makes ValueObjectDynamicValue comply with it
llvm-svn: 247957
Before we had:
ClangFunction
ClangUtilityFunction
ClangUserExpression
and code all over in lldb that explicitly made Clang-based expressions. This patch adds an Expression
base class, and three pure virtual implementations for the Expression kinds:
FunctionCaller
UtilityFunction
UserExpression
You can request one of these expression types from the Target using the Get<ExpressionType>ForLanguage.
The Target will then consult all the registered TypeSystem plugins, and if the type system that matches
the language can make an expression of that kind, it will do so and return it.
Because all of the real expression types need to communicate with their ExpressionParser in a uniform way,
I also added a ExpressionTypeSystemHelper class that expressions generically can vend, and a ClangExpressionHelper
that encapsulates the operations that the ClangExpressionParser needs to perform on the ClangExpression types.
Then each of the Clang* expression kinds constructs the appropriate helper to do what it needs.
The patch also fixes a wart in the UtilityFunction that to use it you had to create a parallel FunctionCaller
to actually call the function made by the UtilityFunction. Now the UtilityFunction can be asked to vend a
FunctionCaller that will run its function. This cleaned up a lot of boiler plate code using UtilityFunctions.
Note, in this patch all the expression types explicitly depend on the LLVM JIT and IR, and all the common
JIT running code is in the FunctionCaller etc base classes. At some point we could also abstract that dependency
but I don't see us adding another back end in the near term, so I'll leave that exercise till it is actually necessary.
llvm-svn: 247720
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
Summary:
When calling find_first_of and find_last_of on a single character,
we can instead just call find / rfind and make our intent more
clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12518
llvm-svn: 246609
Create a new "lldb_private::CompilerDeclContext" class that will replace all direct uses of "clang::DeclContext" when used in compiler agnostic code, yet still allow for conversion to clang::DeclContext subclasses by clang specific code. This completes the abstraction of type parsing by removing all "clang::" references from the SymbolFileDWARF. The new "lldb_private::CompilerDeclContext" class abstracts decl contexts found in compiler type systems so they can be used in internal API calls. The TypeSystem is required to support CompilerDeclContexts with new pure virtual functions that start with "DeclContext" in the member function names. Converted all code that used lldb_private::ClangNamespaceDecl over to use the new CompilerDeclContext class and removed the ClangNamespaceDecl.cpp and ClangNamespaceDecl.h files.
Removed direct use of clang APIs from SBType and now use the abstract type systems to correctly explore types.
Bulk renames for things that used to return a ClangASTType which is now CompilerType:
"Type::GetClangFullType()" to "Type::GetFullCompilerType()"
"Type::GetClangLayoutType()" to "Type::GetLayoutCompilerType()"
"Type::GetClangForwardType()" to "Type::GetForwardCompilerType()"
"Value::GetClangType()" to "Value::GetCompilerType()"
"Value::SetClangType (const CompilerType &)" to "Value::SetCompilerType (const CompilerType &)"
"ValueObject::GetClangType ()" to "ValueObject::GetCompilerType()"
many more renames that are similar.
llvm-svn: 245905
This is more preparation for multiple different kinds of types from different compilers (clang, Pascal, Go, RenderScript, Swift, etc).
llvm-svn: 244689
This is the work done by Ryan Brown from http://reviews.llvm.org/D8712 that makes a TypeSystem class and abstracts types to be able to use a type system.
All tests pass on MacOSX and passed on linux the last time this was submitted.
llvm-svn: 244679
Summary:
This replaces (void)x; usages where they x was subsequently
involved in an assertion with this macro to make the
intent more clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11451
llvm-svn: 243074
Target and breakpoints options were added:
breakpoint set --language lang --name func
settings set target.language pascal
These specify the Language to use when interpreting the breakpoint's
expression (note: currently only implemented for breakpoints on
identifiers). If the breakpoint language is not set, the target.language
setting is used.
This support is required by Pascal, for example, to set breakpoint at 'ns.foo'
for function 'foo' in namespace 'ns'.
Tests on the language were also added to Module::PrepareForFunctionNameLookup
for efficiency.
Reviewed by: clayborg
Subscribers: jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D11119
llvm-svn: 242844
Summary: This aligns the library names used by the Makefile build to be the same as those create by the CMake build to make switching between the two easier. The only major difficulty was lldbHost which was one library in the CMake system and several in the Makefile system. Most of the other changes are trivial renames.
Reviewers: labath
Subscribers: emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11154
llvm-svn: 242196
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
The expression parser mode allows UnknownAnyTy to make it all the way through, but that is bad for ivars because it means type layout fails horribly (as in, clang crashes)
This patch fixes the issue by using the "variables view mode", which masks UnknownAnyTy as empty-type, and pointer-to UnknownAnyTy as void*
This, in turn, allows LLDB to properly reconstruct ivars of IMP type in ObjC type - as per accompanying test case
Fixes rdar://21471326
llvm-svn: 240677
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
This works for Python commands defined via a class (implement get_flags on your class) and C++ plugin commands (which can call SBCommand::GetFlags()/SetFlags())
Flags allow features such as not letting the command run if there's no target, or if the process is not stopped, ...
Commands could always check for these things themselves, but having these accessible via flags makes custom commands more consistent with built-in ones
llvm-svn: 238286
virtual void
LanguageRuntime::ModulesDidLoad (const ModuleList &module_list);
Then reorganized how the objective C plug-in is notified so it will work for all LanguageRuntime subclasses.
llvm-svn: 235118
Since ClangASTSource::layoutRecordType() was overriding a virtual
function in the base, this was inadvertently causing a new method
to be introduced rather than an override. To fix this all method
signatures are changed back to taking DenseMaps, and the `override`
keyword is added to make sure this type of error doesn't happen
again.
To keep the original fix intact, which is that fields and bases
must be added in offset order, the ImportOffsetMap() function
now copies the DenseMap into a vector and then sorts the vector
on the value type (e.g. the offset) before iterating over the
sorted vector and inserting the items.
llvm-svn: 233099
Prior to this patch, we would try to synthesize class types by
iterating over a DenseMap of FieldDecls and adding each one to
a CXXRecordDecl. Since a DenseMap doesn't provide a deterministic
ordering of the elements, this would not add the fields in
FieldOffset order, but rather in some random order determined by
the memory layout of the DenseMap.
This patch fixes the issue by changing DenseMaps to vectors. The
ability to lookup a value in the DenseMap was hardly being used,
and where it is sufficient to do a vector lookup.
Differential Revision: http://reviews.llvm.org/D8512
llvm-svn: 233090
This continues the effort to reduce header footprint and improve
build speed by removing clang and other unnecessary headers
from Target.h. In one case, some headers were included solely
for the purpose of declaring a nested class in Target, which was
not needed by anybody outside the class. In this case the
definition and implementation of the nested class were isolated
in the .cpp file so the header could be removed.
llvm-svn: 231107
Also, since most of the time the lack of such information is a serious problem that hinders productive debugging, emit an actual user visible warning when this occurs (once per process)
Fixes rdar://19898507
llvm-svn: 230299
const, there was never a need for lookup_const_result. Now that vestigal
type is gone, so switch LLDB to lookup_result and to use the
DeclContextLookupResult rather than the Const variant.
llvm-svn: 230126
While there is quite a bit of potential for mishaps due to tagged pointers, and after quite some internal discussion, this seems a saner behavior given how "po" stands for "print OBJECT". The argument being that we should make at least some sensible attempt to print the thing the user passed as-if it was an object
Fixes rdar://19423124
llvm-svn: 226062
Fixed:
1 - try the symbol table symbol for an ObjC ivar and use it if available
2 - fall back to using the runtime data since it is slower to gather via memory read
3 - Fixed our hidden ivars test case to test this to ensure we don't regress
4 - split out a test case in the hidden ivars to cover only the part that was failing so we don't have an expected failure for all of the other content in the test.
<rdar://problem/18882687>
llvm-svn: 224306
Objective-C type in the runtime. This is not actually
true, it's entirely possible to say
@class DoesntExist;
@interface DoesExist {
DoesntExist *whyyyyy;
}
@end
and this code will not only compile but also run. So
this assertion will fire in situations users might
encounter.
I left the assertion enabled in debug mode, because we
could still catch a case we're not aware of (i.e., a
class that we *ought* to have found but where somehow
we mis-parsed the name).
<rdar://problem/19151914>
llvm-svn: 224038
support to LLDB. It includes the following:
- Changed DeclVendor to TypeVendor.
- Made the ObjCLanguageRuntime provide a DeclVendor
rather than a TypeVendor.
- Changed the consumers of TypeVendors to use
DeclVendors instead.
- Provided a few convenience functions on
ClangASTContext to make that easier.
llvm-svn: 223433
runtime. This eliminates potential confusion
when the compiler has to deal with these weird
types later on.
One day I'd like to actually generate the proper
templates, but this is not the day that I write
the parser code to do that.
<rdar://problem/18887634>
llvm-svn: 221658
- A correctness issue: with assertions disabled,
ReadQuotedString would misbehave; and
- A performance issue: BuildType used a long
chain of if()s; I changed that to two switch
statements. That also makes the code much
nicer to step through when debugging it.
llvm-svn: 221651
structures are parsed safely by the Objective-C runtime.
Also made some modifications to the way we parse structs
in the runtime to avoid mis-parsing @ followed by the name
of the next field.
<rdar://problem/18887634>
llvm-svn: 221643
would fail if the class had no ivars.
- Updated use of the RealizeType API by the class
descriptors to use "for_expression" rather than
the misnamed "allow_unknownanytype."
llvm-svn: 220980
to indicate that we're doing stuff for the expression
parser.
- When for_expression is true, look through @s and find
the actual class rather than just returning id.
- Rename BuildObjCObjectType to BuildObjCObjectPointerType
since it's actually returning an object *pointer* type.
llvm-svn: 220979
I don't think on any of the platforms where ObjC matters sizeof(T*) depends on T, so even if we never figured out the pointee type, the pointer type should still be sane
This might also allow some limited inspection where previously none was possible, so a win
llvm-svn: 219540
the user level. It adds the ability to invent new stepping modes implemented by python classes,
and to view the current thread plan stack and to some extent alter it.
I haven't gotten to documentation or tests yet. But this should not cause any behavior changes
if you don't use it, so its safe to check it in now and work on it incrementally.
llvm-svn: 218642
What it does:
- it introduces a concept of EncodingToType to the ObjCLanguageRuntime
The ObjC runtime has a "type encoding" feature that describes types as strings
The EncodingToType is a decoder for that format, making types out of type encoding strings
This feature already existed in some shape as we were using it to create method signatures out of the runtime, but this checkin extends the parser to support the full syntax, and moves things so that more parts of LLDB have access to this decoder
- it splits the ClassDescriptorV2 object to its own file, it was starting to grow too large
- it adds to the ClassDescriptor mechanism a notion of ivar storage; the ObjC runtime vends ivar information as well as method information
While ivar information is not ready for prime type (i.e. we don't want to add it to the runtime generated types for expression evaluator usage), there are potentially useful scenarios in which realizing ivar types could be useful. For now, the ClassDescriptor is going to hold ivar information directly. Existing code already allows describing ivars, this patch hooks those moving parts up so that one can actually ask a ClassDescriptor about ivars for the class it represents
and as a couple minor niceties:
- it makes it possible to retrieve the LLDB ClangASTContext that is associated to a clang::ASTContext
- it extends the ValueObject-to-ClassDescriptor API in the language runtime to deal correctly with base-class hierarchies
llvm-svn: 216026
- First, when logging, be helpful by printing
the real name of the class;
- Second, up the limit for number of classes
from 16k to 128k, and put in an assertion
(and better error handling when not in a
debug configuration) when we cross that
limit the next time.
<rdar://problem/17052976>
llvm-svn: 213218
directly accessing the isa pointer of a class object to get its meta-class, but the isa
pointers are not simple pointers on arm64, so this would cause the stepping to fail.
object_getClass does whatever magic needs doing in this case.
<rdar://problem/17239690>
llvm-svn: 211289
Add a callback that will allow an expression to be cancelled between the
expression evaluation stages (for the ClangUserExpressions.)
<rdar://problem/16790467>, <rdar://problem/16573440>
llvm-svn: 207944
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
Add a GetFoundationVersion() to AppleObjCRuntime
This API is used to return and cache the major version of Foundation.framework, which is potentially a useful piece of data to key off of to enable or disable certain ObjC related behaviors (especially in data formatters)
llvm-svn: 204756
for customizing "step-in" behavior (e.g. step-in doesn't step into code with no debug info), but also
the behavior of step-in/step-out and step-over when they step out of the frame they started in.
I also added as a proof of concept of this reworking a mode for stepping where stepping out of a frame
into a frame with no debug information will continue stepping out till it arrives at a frame that does
have debug information. This is useful when you are debugging callback based code where the callbacks
are separated from the code that initiated them by some library glue you don't care about, among other
things.
llvm-svn: 203747
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
It completes the job of using EvaluateExpressionOptions consistently throughout
the inferior function calling mechanism in lldb begun in Greg's patch r194009.
It removes a handful of alternate calls into the ClangUserExpression/ClangFunction/ThreadPlanCallFunction which
were there for convenience. Using the EvaluateExpressionOptions removes the need for them.
Using that it gets the --debug option from Greg's patch to work cleanly.
It also adds another EvaluateExpressionOption to not trap exceptions when running expressions. You shouldn't
use this option unless you KNOW your expression can't throw beyond itself. This is:
<rdar://problem/15374885>
At present this is only available through the SB API's or python.
It fixes a bug where function calls would unset the ObjC & C++ exception breakpoints without checking whether
they were set by somebody else already.
llvm-svn: 194182
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that it
wasn't working out like I intended. Instead I'll try sticking with
the single StackFrame class -- there's too much code duplication to
make a more complicated class hierarchy sensible I think.
llvm-svn: 193983
defines a protocol that all subclasses will implement. StackFrame
is currently the only subclass and the methods that Frame vends are
nearly identical to StackFrame's old methods.
Update all callers to use Frame*/Frame& instead of pointers to
StackFrames.
This is almost entirely a mechanical change that touches a lot of
the code base so I'm committing it alone. No new functionality is
added with this patch, no new subclasses of Frame exist yet.
I'll probably need to tweak some of the separation, possibly moving
some of StackFrame's methods up in to Frame, but this is a good
starting point.
<rdar://problem/15314068>
llvm-svn: 193907
This commit reimplements the TypeImpl class (the class that backs SBType) in terms of a static,dynamic type pair
This is useful for those cases when the dynamic type of an ObjC variable can only be obtained in terms of an "hollow" type with no ivars
In that case, we could either go with the static type (+iVar information) or with the dynamic type (+inheritance chain)
With the new TypeImpl implementation, we try to combine these two sources of information in order to extract as much information as possible
This should improve the functionality of tools that are using the SBType API to do extensive dynamic type inspection
llvm-svn: 193564
Added a way to set hardware breakpoints from the "breakpoint set" command with the new "--hardware" option. Hardware breakpoints are not a request, they currently are a requirement. So when breakpoints are specified as hardware breakpoints, they might fail to be set when they are able to be resolved and should be used sparingly. This is currently hooked up for GDB remote debugging.
Linux and FreeBSD should quickly enable this feature if possible, or return an error for any breakpoints that are hardware breakpoint sites in the "virtual Error Process::EnableBreakpointSite (BreakpointSite *bp_site);" function.
llvm-svn: 192491
plan providers from a "ThreadPlan *" to a "lldb::ThreadPlanSP". That was needed to fix
a bug where the ThreadPlanStepInRange wasn't checking with its sub-plans to make sure they
succeed before trying to proceed further. If the sub-plan failed and as a result didn't make
any progress, you could end up retrying the same failing algorithm in an infinite loop.
<rdar://problem/14043602>
llvm-svn: 186618
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
llvm-svn: 186130
- ObjectFile::GetSymtab() and ObjectFile::ClearSymtab() no longer takes any flags
- Module coordinates with the object files and contain a unified section list so that object file and symbol file can share sections when they need to, yet contain their own sections.
Other cleanups:
- Fixed Symbol::GetByteSize() to not have the symbol table compute the byte sizes on the fly
- Modified the ObjectFileMachO class to compute symbol sizes all at once efficiently
- Modified the Symtab class to store a file address lookup table for more efficient lookups
- Removed Section::Finalize() and SectionList::Finalize() as they did nothing
- Improved performance of the detection of symbol files that have debug maps by excluding stripped files and core files, debug files, object files and stubs
- Added the ability to tell if an ObjectFile has been stripped with ObjectFile::IsStripped() (used this for the above performance improvement)
llvm-svn: 185990
Giving a timeout for the call to NSPrintForDebugger() that happens when you “po” objects
This is a temporary workaround until a more detailed solution to the general problem of canceling actions is found
llvm-svn: 182782
Don't want about being unable to find a needed objective-c runtime
function when we're core file debugging and can't jit anything
anyway. Don't warn when quitting a debug session on a core file,
the program state can be reconstructed by re-running lldb on the
same core file again.
llvm-svn: 181653
<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
llvm-svn: 181631
value. This fixes problems, for instance, with the StepRange plans, where they know that
they explained the stop because they were at their "run to here" breakpoint, then deleted
that breakpoint, so when they got asked again, doh! I had done this for a couple of plans
in an ad hoc fashion, this just formalizes it.
Also add a "ResumeRequested" in Process so that the code in the completion handlers can
tell the ShouldStop logic they want to resume rather than just directly resuming. That allows
us to handle resuming in a more controlled fashion.
Also, SetPublicState can take a "restarted" flag, so that it doesn't drop the run lock when
the target was immediately restarted.
--This line, and those below , will be ignored--
M test/lang/objc/objc-dynamic-value/TestObjCDynamicValue.py
M include/lldb/Target/ThreadList.h
M include/lldb/Target/ThreadPlanStepOut.h
M include/lldb/Target/Thread.h
M include/lldb/Target/ThreadPlanBase.h
M include/lldb/Target/ThreadPlanStepThrough.h
M include/lldb/Target/ThreadPlanStepInstruction.h
M include/lldb/Target/ThreadPlanStepInRange.h
M include/lldb/Target/ThreadPlanStepOverBreakpoint.h
M include/lldb/Target/ThreadPlanStepUntil.h
M include/lldb/Target/StopInfo.h
M include/lldb/Target/Process.h
M include/lldb/Target/ThreadPlanRunToAddress.h
M include/lldb/Target/ThreadPlan.h
M include/lldb/Target/ThreadPlanCallFunction.h
M include/lldb/Target/ThreadPlanStepOverRange.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
M source/Target/StopInfo.cpp
M source/Target/Process.cpp
M source/Target/ThreadPlanRunToAddress.cpp
M source/Target/ThreadPlan.cpp
M source/Target/ThreadPlanCallFunction.cpp
M source/Target/ThreadPlanStepOverRange.cpp
M source/Target/ThreadList.cpp
M source/Target/ThreadPlanStepOut.cpp
M source/Target/Thread.cpp
M source/Target/ThreadPlanBase.cpp
M source/Target/ThreadPlanStepThrough.cpp
M source/Target/ThreadPlanStepInstruction.cpp
M source/Target/ThreadPlanStepInRange.cpp
M source/Target/ThreadPlanStepOverBreakpoint.cpp
M source/Target/ThreadPlanStepUntil.cpp
M lldb.xcodeproj/xcshareddata/xcschemes/Run Testsuite.xcscheme
llvm-svn: 181381
out of the runtime. This allows calling static methods
on classes whose symbols have been stripped out of the
binary.
<rdar://problem/12042992>
llvm-svn: 180210
Introducing a negative cache for ObjCLanguageRuntime::LookupInCompleteClassCache()
This helps speed up the (common) case of us looking for classes that are hidden deep within Cocoa internals and repeatedly failing at finding type information for them.
In order for this to work, we need to clean this cache whenever debug information is added. A new symbols loaded event is added that is triggered with add-dsym (before modules loaded would be triggered for both adding modules and adding symbols).
Interested parties can register for this event. Internally, we make sure to clean the negative cache whenever symbols are added.
Lastly, ClassDescriptor::IsTagged() has been refactored to GetTaggedPointerInfo() that also (optionally) returns info and value bits. In this way, data formatters can share tagged pointer code instead of duplicating the required arithmetic.
llvm-svn: 178897
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
Add a StopOthers method to AppleThreadPlanStepThroughObjCTrampoline, don't rely on the setting in the ThreadPlanToCallFunction, since that
gets pushed too late to determine which threads will continue.
<rdar://problem/13447638>
llvm-svn: 177691
This is a very basic implementation of a library that easily allows to drive LLDB.framework to write test cases for performance
This is separate from the LLDB testsuite in test/ in that:
a) this uses C++ instead of Python to avoid measures being affected by SWIG
b) this is in very early development and needs lots of tweaking before it can be considered functionally complete
c) this is not meant to test correctness but to help catch performance regressions
There is a sample application built against the library (in darwin/sketch) that uses the famous sample app Sketch as an inferior to measure certain basic parameters of LLDB's behavior.
The resulting output is a PLIST much like the following:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<array>
<dict>
<key>fetch-frames</key>
<real>0.13161715522222225</real>
</dict>
<dict>
<key>file-line-bkpt</key>
<real>0.029111678750000002</real>
</dict>
<dict>
<key>fetch-modules</key>
<real>0.00026376766666666668</real>
</dict>
<dict>
<key>fetch-vars</key>
<real>0.17820429311111111</real>
</dict>
<dict>
<key>run-expr</key>
<real>0.029676525769230768</real>
</dict>
</array>
</plist>
Areas for improvement:
- code cleanups (I will be out of the office for a couple days this coming week, but please keep ideas coming!)
- more metrics and test cases
- better error checking
This toolkit also comprises a simple event-loop-driven controller for LLDB, similar yet much simpler to what the Driver does to implement the lldb command-line tool.
llvm-svn: 176715
- generate-vers.pl has to be called by cmake to generate the version number
- parallel builds not yet supported; dependency on clang must be explicitly specified
Tested on Linux.
- Building on Mac will require code-signing logic to be implemented.
- Building on Windows will require OS-detection logic and some selective directory inclusion
Thanks to Carlo Kok (who originally prepared these CMakefiles for Windows) and Ben Langmuir
who ported them to Linux!
llvm-svn: 175795
Parse objective C information as efficiently as possible and without taking dangerous runtime locks.
Reworked the way objective C information is parsed by:
1 - don't read all class names up front, this is about 500K of data with names
2 - add a 32 bit hash map that maps a hash of a name to the Class pointer (isa)
3 - Improved name lookups by using the new hash map
4 - split up reading the objc runtime info into dynamic and shared cache since the shared cache only needs to be read once.
5 - When reading all isa values, also get the 32 bit hash instead of the name
6 - Read names lazily now that we don't need all names up front
7 - Allow the hash maps to not be there and still have this function correctly
There is dead code in here with all of the various methods I tried. I want to check this in first to not lose any of it in case we need to revert to any of the extra code. I will promptly cleanup and commit again.
llvm-svn: 175101
changing the ClangASTSource to return a bool instead
of returning a list of results. Our testsuite mostly
works with this change, but some minor issues may
remain both on LLDB's side and on Clang's side.
llvm-svn: 174949
hitting auto-continue signals while running a thread plan would cause us to lose control of the debug
session.
<rdar://problem/12993641>
llvm-svn: 174793
Data formatters now cache themselves.
This commit provides a new formatter cache mechanism. Upon resolving a formatter (summary or synthetic), LLDB remembers the resolution for later faster retrieval.
Also moved the data formatters subsystem from the core to its own group and folder for easier management, and done some code reorganization.
The ObjC runtime v1 now returns a class name if asked for the dynamic type of an object. This is required for formatters caching to work with the v1 runtime.
Lastly, this commit disposes of the old hack where ValueObjects had to remember whether they were queried for formatters with their static or dynamic type.
Now the ValueObjectDynamicValue class works well enough that we can use its dynamic value setting for the same purpose.
llvm-svn: 173728
Add the ability to give breakpoints a "kind" string, and have the StopInfoBreakpoint
print that in the brief description if set. Also print the kind - if set - in the breakpoint
listing.
Give kinds to a bunch of the internal breakpoints.
We were deleting the Mac OS X dynamic loader breakpoint as though the id we had stored away was
a breakpoint site ID, but in fact it was a breakpoint id, so we never actually deleted it. Fixed that.
llvm-svn: 173555
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
Extending ValueObjectDynamicValue so that it stores a TypeAndOrName instead of a TypeSP.
This change allows us to reflect the notion that a ValueObject can have a dynamic type for which we have no debug information.
Previously, we would coalesce that to the static type of the object, potentially losing relevant information or even getting it wrong.
This fix ensures we can correctly report the class name for Cocoa objects whose types are hidden classes that we know nothing about (e.g. __NSArrayI for immutable arrays).
As a side effect, our --show-types argument to frame variable no longer needs to append custom dynamic type information.
llvm-svn: 173216
isas and corresponding names from the underlying process
in a manner much quicker than the current approach.
The current approach accesses memory in the underlying
process with a random-access pattern as it walks across
the data structures associated with each isa. This
involves a great deal of back-and-forth with debugserver,
resulting in performance problems, especially with iOS
targets.
The new approach attempts to run an expression in the
target that collects the isas and names into two large
buffers, which LLDB then collects in one shot.
<rdar://problem/12914539>
llvm-svn: 172574
controlled by the --unwind-on-error flag, and --ignore-breakpoint which separately controls behavior when a called
function hits a breakpoint. For breakpoints, we don't unwind, we either stop, or ignore the breakpoint, which makes
more sense.
Also make both these behaviors globally settable through "settings set".
Also handle the case where a breakpoint command calls code that ends up re-hitting the breakpoint. We were recursing
and crashing. Now we just stop without calling the second command.
<rdar://problem/12986644>
<rdar://problem/9119325>
llvm-svn: 172503
The results from Clang name lookups changed to
be ArrayRefs, so I had to change the way we
check for the presence of a result and the way
we iterate across results.
llvm-svn: 170927
for reporting class types from Objective-C runtime
class symbols. Instead, LLDB now queries the
Objective-C runtime for class types.
We have also added a (minimal) Objective-C runtime
type vendor for Objective-C runtime version 1, to
prevent regressions when calling class methods in
the V1 runtime.
Other components of this fix include:
- We search the Objective-C runtime in a few more
places.
- We enable enumeration of all members of
Objective-C classes, which Clang does in certain
circumstances.
- SBTarget::FindFirstType and SBTarget::FindTypes
now query the Objective-C runtime as needed.
- I fixed several test cases.
<rdar://problem/12885034>
llvm-svn: 170601
- remove unused members
- add NO_PEDANTIC to selected Makefiles
- fix return values (removed NULL as needed)
- disable warning about four-char-constants
- remove unneeded const from operator*() declaration
- add missing lambda function return types
- fix printf() with no format string
- change sizeof to use a type name instead of variable name
- fix Linux ProcessMonitor.cpp to be 32/64 bit friendly
- disable warnings emitted by swig-generated C++ code
Patch by Matt Kopec!
llvm-svn: 169645
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
- use const char* instead of char* as needed in ObjC language runtime plugin
- use int to iterate through enum (operator++ on enum not defined)
- use initializer list instead of inline initialization of const field
llvm-svn: 169185
versions of UnknownAnyTy for ObjectiveC value types.
<unknown type>* makes no sense and can cause the
parser to behave very oddly.
<rdar://problem/12518999>
llvm-svn: 168844
expressions that refer to ivars will not work because Clang
emits IR that refers to them to get the ivar offsets.
However, it is possible to search the runtime for these values.
I have added support for reading the relevant tables to the
Objective-C runtime, and extended ClangExpressionDeclMap to
query that information if and only if it doesn't find the symbols
in the binary.
Also added a testcase.
<rdar://problem/12628122>
llvm-svn: 168018
This commit does three things:
(a) introduces a new notification model for adding/removing/changing modules to a ModuleList, and applies it to the Target's ModuleList, so that we make sure to always trigger the right set of actions
whenever modules come and go in a target. Certain spots in the code still need to "manually" notify the Target for several reasons, so this is a work in progress
(b) adds a new capability to the Platforms: locating a scripting resources associated to a module. A scripting resource is a Python file that can load commands, formatters, ... and any other action
of interest corresponding to the loading of a module. At the moment, this is only implemented on Mac OS X and only for files inside .dSYM bundles - the next step is going to be letting
the frameworks themselves hold their scripting resources. Implementors of platforms for other systems are free to implement "the right thing" for their own worlds
(c) hooking up items (a) and (b) so that targets auto-load the scripting resources as the corresponding modules get loaded in a target. This has a few caveats at the moment:
- the user needs to manually add the .py file to the dSYM (soon, it will also work in the framework itself)
- if two modules with the same name show up during the lifetime of an LLDB session, the second one won't be able to load its scripting resource, but will otherwise work just fine
llvm-svn: 167569
Also fixed a bug where the Objective-C runtime
would not properly report that it found a class if
(a) it had to build the ObjCInterfaceDecl for the
class and (b) logging was enabled.
<rdar://problem/12641180>
llvm-svn: 167516
so it could hold this information, and then used it to look up unfound names in the object pointer
if it exists. This gets "frame var" to work for unqualified references to ivars captured in blocks.
But the expression parser is ignoring this information still.
llvm-svn: 166860
- Only read the statically-defined isa table in the
shared cache once. Only the dynamically-constructed
isa table can change.
- Ignore the statically-defined isa table if its
version isn't what we expect.
llvm-svn: 166856
Dynamic type code must be efficient and fast. Now it is.
Added ObjC v1 support for getting the complete list of ISA values.
The main flow of the AppleObjCRuntime subclasses is now they must override "virtual bool UpdateISAToDescriptorMap_Impl();". This function will update the complete list of ISA values and create ClassDescriptorSP objects for each one. Now we have the complete list of valid ISA values which we can use for verification when doing dynamic typing.
Refactored a bunch of stuff so that the AppleObjCRuntime subclasses don't have to implement as many functions as they used to.
llvm-svn: 165730
over to simply update its cache and then look up
the descriptor in the cache. This is fine because
the cache now builds much faster (since descriptors
are minimal).
Metaclasses aren't in the cache, so I switched
the Describe method for class descriptors from using
GetClassDescriptor to manually creating an automatic
ClassDescriptorV2.
llvm-svn: 165579
The following are now derived lazily:
- The name of the class (cached);
- the instance size of the class (not cached);
The following have been removed entirely:
- Whether the class is realized. This is an
implementation detail.
- The contents of the objc_class object. That
object can be read as needed.
- Whether the class is valid. The fact that
we vended a class to begin with means it's
valid. We will only give up looking parts
of it up if they are not in the format we
expect.
llvm-svn: 165567
lighter-weight so that the cache can be populated
faster.
- I Added a ProcessWP to the runtime so I can
take it out of the individual descriptors, saving
space;
- I made the constructors for the descriptors
private so that only the runtime can invoke them;
and
- I removed the constructor that takes a ValueObject
since the logic for using a ValueObject is in the
runtime.
llvm-svn: 165549
enabled after we'd found a few bugs that were caused by shadowed
local variables; the most important issue this turned up was
a common mistake of trying to obtain a mutex lock for the scope
of a code block by doing
Mutex::Locker(m_map_mutex);
This doesn't assign the lock object to a local variable; it is
a temporary that has its dtor called immediately. Instead,
Mutex::Locker locker(m_map_mutex);
does what is intended. For some reason -Wshadow happened to
highlight these as shadowed variables.
I also fixed a few obivous and easy shadowed variable issues
across the code base but there are a couple dozen more that
should be fixed when someone has a free minute.
<rdar://problem/12437585>
llvm-svn: 165269
runtime, we read method signatures for both class
and instance methods out of the runtime data.
(lldb) fr var str
(NSString *) str = 0x0000000105000180 @"Hello from '/Volumes/Data/projects/lldb/test/lang/objc/foundation/a.out'"
(lldb) expr str.length
(unsigned long long) $0 = 72
(lldb) expr [NSString stringWithCString:"Hello world!" encoding:1]
(id) $1 = 0x0000000105100050
(lldb) po $1
$1 = 0x0000000105100050 Hello world!
(lldb) fr var array1
(NSArray *) array1 = 0x000000010010a6e0 @"3 objects"
(lldb) expr array1.count
(unsigned long long) $0 = 3
(lldb) expr [array1 objectAtIndex:2]
(id) $1 = 0x00000001000025d0
(lldb) po $1
$1 = 0x00000001000025d0 array1 object3
Notice that both regular and property-style notation
work. I still need to add explicit support for
properties with non-default setters/getters.
This information is only queried if an Objective-C
object does not have debug information for a complete
type available. Otherwise we query debug information
as usual.
llvm-svn: 164878
where the descriptor took a pointer to an object and
expected the Initialize function to dereference that
pointer and extract the isa value. This caused one
of our tests to fail.
llvm-svn: 164353
We can now read the relevant data structures for
the method list, and use a callback mechanism to
report their details to the AppleObjCTypeVendor,
which constructs appropriate Clang types.
llvm-svn: 164310
data structures more rapidly. Also added fields
for the other data structures in a class.
I also fixed a problem where I accidentally used
hasExternalLexicalStorage() instead of
hasExternalVisibleStorage() to mark an
incomplete object.
llvm-svn: 164197
populate Clang ObjCInterfaceDecls with their
ivars, methods, and properties. The default
implementation does nothing. I have also made
sure that AppleObjCRuntimeV2 creates
ObjCInterfaceDecls that actually get queried
appropriately.
llvm-svn: 164164
the dynamic and static runtime class tables to
construct our isa table. This is putting the runtime
in contact with unrealized classes, which we need
to deal with in order to get accurate information.
That's the next piece of work.
<rdar://problem/10986023>
llvm-svn: 163957
information from the Objective-C runtime.
This patch takes the old AppleObjCSymbolVendor and
replaces it with an AppleObjCTypeVendor, which is
much more lightweight. Specifically, the SymbolVendor
needs to pretend that there is a backing symbol file
for the Types it vends, whereas a TypeVendor only
vends bare ClangASTTypes. These ClangASTTypes only
need to exist in an ASTContext.
The ClangASTSource now falls back to the runtime's
TypeVendor (if one exists) if the debug information
doesn't find a complete type for a particular
Objective-C interface. The runtime's TypeVendor
maintains an ASTContext full of types it knows about,
and re-uses the ISA-based type query information used
by the ValueObjects.
Currently, the runtime's TypeVendor doesn't provide
useful answers because we haven't yet implemented a
way to iterate across all ISAs contained in the target
process's runtime. That's the next step.
llvm-svn: 163651
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
- no setting auto completion
- very manual and error prone way of getting/setting variables
- tons of code duplication
- useless instance names for processes, threads
Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing".
llvm-svn: 162366
setting breakpoints. That's dangerous, since while we are setting a breakpoint,
the target might hit the dyld load notification, and start removing modules from
the list. This change adds a GetMutex accessor to the ModuleList class, and
uses it whenever we are accessing the target's ModuleList (as returned by GetImages().)
<rdar://problem/11552372>
llvm-svn: 157668
boxed expressions returning numbers and strings.
I also added boxed expressions to our testcases, and
enabled boxed expressions when libarclite is linked into
the inferior.
llvm-svn: 157026
the controlling plans so that they don't lose control.
Also change "ThreadPlanStepThrough" to take the return StackID for its backstop breakpoint as an argument
to the constructor rather than having it try to figure it out itself, since it might get it wrong whereas
the caller always knows where it is coming from.
rdar://problem/11402287
llvm-svn: 156529
spin up a temporary "private state thread" that will respond to events from the lower level process plugins. This check-in should work to do
that, but it is still buggy. However, if you don't call functions on the private state thread, these changes make no difference.
This patch also moves the code in the AppleObjCRuntime step-through-trampoline handler that might call functions (in the case where the debug
server doesn't support the memory allocate/deallocate packet) out to a safe place to do that call.
llvm-svn: 154230
Fixed type lookups to "do the right thing". Prior to this fix, looking up a type using "foo::bar" would result in a type list that contains all types that had "bar" as a basename unless the symbol file was able to match fully qualified names (which our DWARF parser does not).
This fix will allow type matches to be made based on the basename and then have the types that don't match filtered out. Types by name can be fully qualified, or partially qualified with the new "bool exact_match" parameter to the Module::FindTypes() method.
This fixes some issue that we discovered with dynamic type resolution as well as improves the overall type lookups in LLDB.
llvm-svn: 153482
Enrico Granata