Add a new node to act as a fancy bitcast from f16 operations to
i32 that implicitly zero the high 16-bits of the result.
Alternatively could try making v2f16 legal and canonicalizing
on build_vectors.
llvm-svn: 299246
Previously compiler often extracted common immediates into specific register, e.g.:
```
%vreg0 = S_MOV_B32 0xff;
%vreg2 = V_AND_B32_e32 %vreg0, %vreg1
%vreg4 = V_AND_B32_e32 %vreg0, %vreg3
```
Because of this SDWA peephole failed to find SDWA convertible pattern. E.g. in previous example this could be converted into 2 SDWA src operands:
```
SDWA src: %vreg2 src_sel:BYTE_0
SDWA src: %vreg4 src_sel:BYTE_0
```
With this change peephole check if operand is either immediate or register that is copy of immediate.
llvm-svn: 299202
If set to false it does not remove global aliases. With this parameter
set to false it should be safe to run the pass before link.
Differential Revision: https://reviews.llvm.org/D31489
llvm-svn: 299108
This is less important than increase threshold for private memory,
but still brings performance improvements in a wide range of tests.
Unrolling more for local memory serves three purposes: it allows
to combine ds operations if offset becomes static, saves registers
used for offsets in case of static offsets, and allows better lds
latency hiding.
Differential Revision: https://reviews.llvm.org/D31412
llvm-svn: 298948
Previously it was covered by the internalization. It turns out we cannot
run internalizer in FE, it break separate compilation tests. Thus early
inliner gets its own option.
Differential Revision: https://reviews.llvm.org/D31429
llvm-svn: 298935
Switch data layout by target triple environment amdgiz and amdgizcl indicating using of an address space mapping in which generic address space is 0.
amdgiz is for non-OpenCL environment where generic address space is 0.
amdgizcl is for OpenCL environment where generic address space is 0.
Differential Revision: https://reviews.llvm.org/D31211
llvm-svn: 298758
If the branch condition for a loop was a phi which itself
was fed from a phi from a loop, it isn't safe to try
to delete the phi until after the loop is handled.
llvm-svn: 298737
StructurizeCFG can't handle cases with multiple
returns creating regions with multiple exits.
Create a copy of UnifyFunctionExitNodes that only
unifies exit nodes that skips exit nodes
with uniform branch sources.
llvm-svn: 298729
- Rename runtime metadata -> code object metadata
- Make metadata not flow
- Switch enums to use ScalarEnumerationTraits
- Cleanup and move AMDGPUCodeObjectMetadata.h to AMDGPU/MCTargetDesc
- Introduce in-memory representation for attributes
- Code object metadata streamer
- Create metadata for isa and printf during EmitStartOfAsmFile
- Create metadata for kernel during EmitFunctionBodyStart
- Finalize and emit metadata to .note during EmitEndOfAsmFile
- Other minor improvements/bug fixes
Differential Revision: https://reviews.llvm.org/D29948
llvm-svn: 298552
This is used for a specific type of return to a shader part's
epilog code. Rename to try avoiding confusion from a true
call's return.
llvm-svn: 298452
Fix two problems related to r298025:
- SplitKit would create duplicate VNIs in some cases leading to crashs
when hoisting copies.
- VirtRegMap could fail expanding copies at the beginning of a basic
block.
This fixes http://llvm.org/PR32353
llvm-svn: 298448
Currently the default C calling convention functions are treated
the same as compute kernels. Make this explicit so the default
calling convention can be changed to a non-kernel.
Converted with perl -pi -e 's/define void/define amdgpu_kernel void/'
on the relevant test directories (and undoing in one place that actually
wanted a non-kernel).
llvm-svn: 298444
This adds a parameter to @llvm.objectsize that makes it return
conservative values if it's given null.
This fixes PR23277.
Differential Revision: https://reviews.llvm.org/D28494
llvm-svn: 298430
Summary:
First iteration of SDWA peephole.
This pass tries to combine several instruction into one SDWA instruction. E.g. it converts:
'''
V_LSHRREV_B32_e32 %vreg0, 16, %vreg1
V_ADD_I32_e32 %vreg2, %vreg0, %vreg3
V_LSHLREV_B32_e32 %vreg4, 16, %vreg2
'''
Into:
'''
V_ADD_I32_sdwa %vreg4, %vreg1, %vreg3 dst_sel:WORD_1 dst_unused:UNUSED_PAD src0_sel:WORD_1 src1_sel:DWORD
'''
Pass structure:
1. Iterate over machine instruction in basic block and try to apply "SDWA patterns" to each of them. SDWA patterns match machine instruction into either source or destination SDWA operand. E.g. ''' V_LSHRREV_B32_e32 %vreg0, 16, %vreg1''' is matched to source SDWA operand '''%vreg1 src_sel:WORD_1'''.
2. Iterate over found SDWA operands and find instruction that could be potentially coverted into SDWA. E.g. for source SDWA operand potential instruction are all instruction in this basic block that uses '''%vreg0'''
3. Iterate over all potential instructions and check if they can be converted into SDWA.
4. Convert instructions to SDWA.
This review contains basic implementation of SDWA peephole pass. This pass requires additional testing fot both correctness and performance (no performance testing done).
There are several ways this pass can be improved:
1. Make this pass work on whole function not only basic block. As I can see this can be done right now without changes to pass.
2. Introduce more SDWA patterns
3. Introduce mnemonics to limit when SDWA patterns should apply
Reviewers: vpykhtin, alex-t, arsenm, rampitec
Subscribers: wdng, nhaehnle, mgorny
Differential Revision: https://reviews.llvm.org/D30038
llvm-svn: 298365
Folding instructions when selecting can cause them to become dead.
Don't select these dead instructions (if they don't have other side
effects, and don't define physical registers).
Preserve existing tests by adding COPYs.
In some tests, the G_CONSTANT vregs never get constrained to a class:
the only use of the vreg was folded into another instruction, so the
G_CONSTANT, now dead, never gets selected.
llvm-svn: 298224
This is direct port of HSAILAliasAnalysis pass, just cleaned for
style and renamed.
Differential Revision: https://reviews.llvm.org/D31103
llvm-svn: 298172
If the loop condition was an i1 phi with a constantexpr input, this
would add a loop intrinsic fed by a phi dependent on a call to
if.break in the same block. Insert the call in the loop header.
llvm-svn: 298121
- This fixes a bug where subregister incompatible with the vregs register
class where used.
- Implement the case where multiple copies are necessary to cover a
given lanemask.
Differential Revision: https://reviews.llvm.org/D30438
llvm-svn: 298025
We can mark functions to always inline early in the opt. Since we do not have
call support this early inlining creates opportunities for inter-procedural
optimizations which would not occur otherwise.
Differential Revision: https://reviews.llvm.org/D31016
llvm-svn: 297958
computeKnownBits didn't handle fp_to_fp16 to report
the high bits as 0. ARM maps the generic node to an instruction
that does not modify the high bits of the register, so introduce
a target node where the high bits are known 0.
llvm-svn: 297873
Recommiting with compiler time improvements
Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 297695
Since v_max_f32_e64/v_max_f16_e64 can be folded if the target
instruction supports the clamp bit, we also need to maintain
modifiers when converting v_mac to v_mad.
This fixes a rendering issue with Dirt Rally because a v_mac
instruction with the clamp bit set was converted to a v_mad
but that bit was lost during the conversion.
Fixes: e184e01dd79 ("AMDGPU: Fold FP clamp as modifier bit")
Patch by Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 297556
This method inverts the Reason field of a scheduling candidate.
It does right comparison between RegCritical and RegExcess, but
everything else is broken. In fact it can prefer less strong reason
such as Weak over RegCritical because Weak > -RegCritical.
The CandReason enum is properly sorted, so just remove artificial
ranking.
Differential Revision: https://reviews.llvm.org/D30557
llvm-svn: 297536
If there is only one successor, and that successor only
has one predecessor the wait can obviously be delayed until
uses or the end of the next block. This avoids code quality
regressions when there are trivial fallthrough blocks inserted
for structurization.
llvm-svn: 297251
This patch causes compile times for some patterns to explode. I have
a (large, unreduced) test case that slows down by more than 20x and
several test cases slow down by 2x. I'm sending some of the test cases
directly to Nirav and following up with more details in the review log,
but this should unblock anyone else hitting this.
llvm-svn: 296862
This commit also relied on r296812, which I just reverted. We should probably
apply it again, after the r296812 has been discussed and been reapplied in some
variant.
llvm-svn: 296820
Surprisingly, one of the three interference checks in LiveRegMatrix was
using the main live range instead of the apropriate subregister range
resulting in unnecessarily conservative results.
llvm-svn: 296722
Resubmit r295336 after the bug with non-zero offset patterns on BE targets is fixed (r296336).
Support {a|s}ext, {a|z|s}ext load nodes as a part of load combine patters.
Reviewed By: filcab
Differential Revision: https://reviews.llvm.org/D29591
llvm-svn: 296651
Modify the test so that it is still testing something
closer to what it was intended to originally.
I think the original intent was to test the situation where
there was a branch on execz and then unconditional branch
required relaxing.With the change in r296539,
there was no longer and execz branch.
Change the test so that there is now an execz branch inserted.
There is no longer an unconditional branch after the execz branch,
so this might need to be tricked in some other way to keep that
there.
llvm-svn: 296574
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296476
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296252
This reverts commit r296009. It broke one out of tree target and also
does not account for all partial lines added or removed when calculating
PressureDiff.
llvm-svn: 296182
The motivation for filling out these select-of-constants cases goes back to D24480,
where we discussed removing an IR fold from add(zext) --> select. And that goes back to:
https://reviews.llvm.org/rL75531https://reviews.llvm.org/rL159230
The idea is that we should always canonicalize patterns like this to a select-of-constants
in IR because that's the smallest IR and the best for value tracking. Note that we currently
do the opposite in some cases (like the cases in *this* patch). Ie, the proposed folds in
this patch already exist in InstCombine today:
https://github.com/llvm-mirror/llvm/blob/master/lib/Transforms/InstCombine/InstCombineSelect.cpp#L1151
As this patch shows, most targets generate better machine code for simple ext/add/not ops
rather than a select of constants. So the follow-up steps to make this less of a patchwork
of special-case folds and missing IR canonicalization:
1. Have DAGCombiner convert any select of constants into ext/add/not ops.
2 Have InstCombine canonicalize in the other direction (create more selects).
Differential Revision: https://reviews.llvm.org/D30180
llvm-svn: 296137
If a subreg is used in an instruction it counts as a whole superreg
for the purpose of register pressure calculation. This patch corrects
improper register pressure calculation by examining operand's lane mask.
Differential Revision: https://reviews.llvm.org/D29835
llvm-svn: 296009
The manual is unclear on the details of this. It's not
clear to me if denormals are not allowed with clamp,
or if that is only omod. Not allowing denorms for
fp16 or fp64 isn't useful so I also question if that
is really a restriction. Same with whether this is valid
without IEEE mode enabled.
llvm-svn: 295905
This should avoid reporting any stack needs to be allocated in the
case where no stack is truly used. An unused stack slot is still
left around in other cases where there are real stack objects
but no spilling occurs.
llvm-svn: 295891
This allows us to ensure that 0 is never a valid pointer
to a user object, and ensures that the offset is always legal
without needing a register to access it. This comes at the cost
of usable offsets and wasted stack space.
llvm-svn: 295877
Change implementation to use max instead of add.
min/max/med3 do not flush denormals regardless of the mode,
so it is OK to use it whether or not they are enabled.
Also allow using clamp with f16, and use knowledge
of dx10_clamp.
llvm-svn: 295788
Before frame offsets are calculated, try to eliminate the
frame indexes used by SGPR spills. Then we can delete them
after.
I think for now we can be sure that no other instruction
will be re-using the same frame indexes. It should be easy
to notice if this assumption ever breaks since everything
asserts if it tries to use a dead frame index later.
The unused emergency stack slot seems to still be left behind,
so an additional 4 bytes is still wasted.
llvm-svn: 295753
A line number doesn't make much sense if you don't say where it's
from. Add a verifier check for this and update some tests that had
bogus debug info.
llvm-svn: 295516
Resubmit -r295314 with PowerPC and AMDGPU tests updated.
Support {a|s}ext, {a|z|s}ext load nodes as a part of load combine patters.
Reviewed By: filcab
Differential Revision: https://reviews.llvm.org/D29591
llvm-svn: 295336
Lay out trellis-shaped CFGs optimally.
A trellis of the shape below:
A B
|\ /|
| \ / |
| X |
| / \ |
|/ \|
C D
would be laid out A; B->C ; D by the current layout algorithm. Now we identify
trellises and lay them out either A->C; B->D or A->D; B->C. This scales with an
increasing number of predecessors. A trellis is a a group of 2 or more
predecessor blocks that all have the same successors.
because of this we can tail duplicate to extend existing trellises.
As an example consider the following CFG:
B D F H
/ \ / \ / \ / \
A---C---E---G---Ret
Where A,C,E,G are all small (Currently 2 instructions).
The CFG preserving layout is then A,B,C,D,E,F,G,H,Ret.
The current code will copy C into B, E into D and G into F and yield the layout
A,C,B(C),E,D(E),F(G),G,H,ret
define void @straight_test(i32 %tag) {
entry:
br label %test1
test1: ; A
%tagbit1 = and i32 %tag, 1
%tagbit1eq0 = icmp eq i32 %tagbit1, 0
br i1 %tagbit1eq0, label %test2, label %optional1
optional1: ; B
call void @a()
br label %test2
test2: ; C
%tagbit2 = and i32 %tag, 2
%tagbit2eq0 = icmp eq i32 %tagbit2, 0
br i1 %tagbit2eq0, label %test3, label %optional2
optional2: ; D
call void @b()
br label %test3
test3: ; E
%tagbit3 = and i32 %tag, 4
%tagbit3eq0 = icmp eq i32 %tagbit3, 0
br i1 %tagbit3eq0, label %test4, label %optional3
optional3: ; F
call void @c()
br label %test4
test4: ; G
%tagbit4 = and i32 %tag, 8
%tagbit4eq0 = icmp eq i32 %tagbit4, 0
br i1 %tagbit4eq0, label %exit, label %optional4
optional4: ; H
call void @d()
br label %exit
exit:
ret void
}
here is the layout after D27742:
straight_test: # @straight_test
; ... Prologue elided
; BB#0: # %entry ; A (merged with test1)
; ... More prologue elided
mr 30, 3
andi. 3, 30, 1
bc 12, 1, .LBB0_2
; BB#1: # %test2 ; C
rlwinm. 3, 30, 0, 30, 30
beq 0, .LBB0_3
b .LBB0_4
.LBB0_2: # %optional1 ; B (copy of C)
bl a
nop
rlwinm. 3, 30, 0, 30, 30
bne 0, .LBB0_4
.LBB0_3: # %test3 ; E
rlwinm. 3, 30, 0, 29, 29
beq 0, .LBB0_5
b .LBB0_6
.LBB0_4: # %optional2 ; D (copy of E)
bl b
nop
rlwinm. 3, 30, 0, 29, 29
bne 0, .LBB0_6
.LBB0_5: # %test4 ; G
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
b .LBB0_7
.LBB0_6: # %optional3 ; F (copy of G)
bl c
nop
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
.LBB0_7: # %optional4 ; H
bl d
nop
.LBB0_8: # %exit ; Ret
ld 30, 96(1) # 8-byte Folded Reload
addi 1, 1, 112
ld 0, 16(1)
mtlr 0
blr
The tail-duplication has produced some benefit, but it has also produced a
trellis which is not laid out optimally. With this patch, we improve the layouts
of such trellises, and decrease the cost calculation for tail-duplication
accordingly.
This patch produces the layout A,C,E,G,B,D,F,H,Ret. This layout does have
back edges, which is a negative, but it has a bigger compensating
positive, which is that it handles the case where there are long strings
of skipped blocks much better than the original layout. Both layouts
handle runs of executed blocks equally well. Branch prediction also
improves if there is any correlation between subsequent optional blocks.
Here is the resulting concrete layout:
straight_test: # @straight_test
; BB#0: # %entry ; A (merged with test1)
mr 30, 3
andi. 3, 30, 1
bc 12, 1, .LBB0_4
; BB#1: # %test2 ; C
rlwinm. 3, 30, 0, 30, 30
bne 0, .LBB0_5
.LBB0_2: # %test3 ; E
rlwinm. 3, 30, 0, 29, 29
bne 0, .LBB0_6
.LBB0_3: # %test4 ; G
rlwinm. 3, 30, 0, 28, 28
bne 0, .LBB0_7
b .LBB0_8
.LBB0_4: # %optional1 ; B (Copy of C)
bl a
nop
rlwinm. 3, 30, 0, 30, 30
beq 0, .LBB0_2
.LBB0_5: # %optional2 ; D (Copy of E)
bl b
nop
rlwinm. 3, 30, 0, 29, 29
beq 0, .LBB0_3
.LBB0_6: # %optional3 ; F (Copy of G)
bl c
nop
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
.LBB0_7: # %optional4 ; H
bl d
nop
.LBB0_8: # %exit
Differential Revision: https://reviews.llvm.org/D28522
llvm-svn: 295223
This patch reverts region's scheduling to the original untouched state
in case if we have have decreased occupancy.
In addition it switches to use TargetRegisterInfo occupancy callback
for pressure limits instead of gradually increasing limits which were
just passed by. We are going to stay with the best schedule so we do
not need to tolerate worsened scheduling anymore.
Differential Revision: https://reviews.llvm.org/D29971
llvm-svn: 295206
This patch corrects the maximum workgroups per CU if we have big
workgroups (more than 128). This calculation contributes to the
occupancy calculation in respect to LDS size.
Differential Revision: https://reviews.llvm.org/D29974
llvm-svn: 295134
This change returns empty PSet list for M0 register. Otherwise its
PSet as defined by tablegen is SReg_32. This results in incorrect
register pressure calculation every time an instruction uses M0.
Such uses count as SReg_32 PSet and inadequately increase pressure
on SGPRs.
Differential Revision: https://reviews.llvm.org/D29798
llvm-svn: 294691
For amdgcn target Clang generates addrspacecast to represent null pointers in private and local address spaces.
In LLVM codegen, the static variable initializer is lowered by virtual function AsmPrinter::lowerConstant which is target generic. Since addrspacecast is target specific, AsmPrinter::lowerConst
This patch overrides AsmPrinter::lowerConstant with AMDGPUAsmPrinter::lowerConstant, which is able to lower the target-specific addrspacecast in the null pointer representation so that -1 is co
Differential Revision: https://reviews.llvm.org/D29284
llvm-svn: 294265
An assert occurs when calling SlotIndexes::getInstructionIndex with
a DBG_VALUE instruction because the function expects an instruction
with a slot index. However, there is no slot index for a DBG_VALUE
instruction.
Differential Revision: https://reviews.llvm.org/D29048
llvm-svn: 294070
Recommiting after fixing X86 inc/dec chain bug.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293893
The operand types were defined to fit the fp16_to_fp node, which
has the half as an integer type. v_cvt_f32_f16 does support
source modifiers, so change this to have an FP type and modifiers.
For targets without legal f16, this requires recognizing the
bit operations and trying to produce them.
llvm-svn: 293857
Functions matching LDS use to occupancy return results for a workgroup
of 64 workitems. The numbers has to be adjusted for bigger workgroups.
For example a workgroup of size 256 already occupies 4 waves just by
itself. Given that all numbers of LDS use in the compiler are per
workgroup, occupancy shall be multiplied by 4 in this case. Each 64
workitems still limited by the same number, but 4 subrgoups 64 workitems
each can afford 4 times more LDS to get the same occupancy.
In addition change initializes LDS size in the subtarget to a real value
for SI+ targets. This is required since LDS size is a variable in these
calculations.
Differential Revision: https://reviews.llvm.org/D29423
llvm-svn: 293837
These were simply preserving the flags of the original operation,
which was too conservative in most cases and incorrect for mul.
nsw/nuw may be needed for some combines to cleanup messes when
intermediate sext_inregs are introduced later.
Tested valid combinations with alive.
llvm-svn: 293776
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well, subject to some simple frequency calculations.
Differential Revision: https://reviews.llvm.org/D28583
llvm-svn: 293716
Summary:
For some reason instructions are being inserted in the wrong order with some
builds. I'm not sure why this is happening.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D29325
llvm-svn: 293639
Summary:
The affected transforms all implicitly use associativity of addition,
for which we usually require unsafe math to be enabled.
The "Aggressive" flag is only meant to convey information about the
performance of the fused ops relative to a fmul+fadd sequence.
Fixes Bug 31626.
Reviewers: spatel, hfinkel, mehdi_amini, arsenm, tstellarAMD
Subscribers: jholewinski, nemanjai, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D28675
llvm-svn: 293635
I think this is safe as long as no inputs are known to ever
be nans.
Also add an intrinsic for fmed3 to be able to handle all safe
math cases.
llvm-svn: 293598
Since we have no call support and late linking we can produce code
only for used symbols. This saves compilation time, size of the final
executable, and size of any intermediate dumps.
Run Internalize pass early in the opt pipeline followed by global
DCE pass. To enable it RT can pass -amdgpu-internalize-symbols option.
Differential Revision: https://reviews.llvm.org/D29214
llvm-svn: 293549
This is worse if the original constant is an inline immediate.
This should also be done for 64-bit adds, but requires fixing
operand folding bugs first.
llvm-svn: 293540
Accomplishes what r292982 was supposed to, which ended up
only really making the necessary test changes.
This should be applied to the 4.0 branch.
Patch by Vedran Miletić <vedran@miletic.net>
llvm-svn: 293310
With the adjustPassManager interface that is now possible to use
custom early module passes.
Differential Revision: https://reviews.llvm.org/D29189
llvm-svn: 293300
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
clang already emits this with -cl-no-signed-zeros, but codegen
doesn't do anything with it. Treat it like the other fast math
attributes, and change one place to use it.
llvm-svn: 293024
Leave early ifcvt disabled for now since there are some
shader-db regressions.
This causes some immediate improvements, but could be better.
The cost checking that the pass does is based on critical path
length for out of order CPUs which we do not want so it skips out
on many cases we want.
llvm-svn: 293016
The sequence like this:
v_cmpx_le_f32_e32 vcc, 0, v0
s_branch BB0_30
s_cbranch_execnz BB0_30
; BB#29:
exp null off, off, off, off done vm
s_endpgm
BB0_30:
; %endif110
is likely wrong. The s_branch instruction will unconditionally jump
to BB0_30 and the skip block (exp done + endpgm) inserted for
performing the kill instruction will never be executed. This results
in a GPU hang with Star Ruler 2.
The s_branch instruction is added during the "Control Flow Optimizer"
pass which seems to re-organize the basic blocks, and we assume
that SI_KILL_TERMINATOR is always the last instruction inside a
basic block. Thus, after inserting a skip block we just go to the
next BB without looking at the subsequent instructions after the
kill, and the s_branch op is never removed.
Instead, we should remove the unconditional out branches and let
skip the two instructions if the exec mask is non-zero.
This patch fixes the GPU hang and doesn't introduce any regressions
with "make check".
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99019
Patch by Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 292985
This switches to the workaround that HSA defaults to
for the mesa path.
This should be applied to the 4.0 branch.
Patch by Vedran Miletić <vedran@miletic.net>
llvm-svn: 292982
Regalloc creates COPY instructions which do not formally use VALU.
That results in v_mov instructions displaced after exec mask modification.
One pass which do it is SIOptimizeExecMasking, but potentially it can be
done by other passes too.
This patch adds a pass immediately after regalloc to add implicit exec
use operand to all VGPR copy instructions.
Differential Revision: https://reviews.llvm.org/D28874
llvm-svn: 292956
Inline spiller can decide to move a spill as early as possible in the basic block.
It will skip phis and label, but we also need to make sure it skips instructions
in the basic block prologue which restore exec mask.
Added isPositionLike callback in TargetInstrInfo to detect instructions which
shall be skipped in addition to common phis, labels etc.
Differential Revision: https://reviews.llvm.org/D27997
llvm-svn: 292554
For -(x + y) -> (-x) + (-y), if x == -y, this would
change the result from -0.0 to 0.0. Since the fma/fmad
combine is an extension of this problem it also
applies there.
fmul should be fine, and I don't think any of the unary
operators or conversions should be a problem either.
llvm-svn: 292473
Limit register coalescer by not allowing it to artificially increase
size of registers beyond dword. Such super-registers are in fact
register sequences and not distinct HW registers.
With more super-regs we would need to allocate adjacent registers
and constraint regalloc more than needed. Moreover, our super
registers are overlapping. For instance we have VGPR0_VGPR1_VGPR2,
VGPR1_VGPR2_VGPR3, VGPR2_VGPR3_VGPR4 etc, which complicates registers
allocation even more, resulting in excessive spilling.
Differential Revision: https://reviews.llvm.org/D28782
llvm-svn: 292413
This produces worse code when i16 is legal, mostly
due to combines getting confused by conversions inserted
for uniform 16-bit operations.
llvm-svn: 291717
This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded.
This needs a simple probability check because there are some cases where it is
not profitable.
llvm-svn: 291695
Even with aggressive fusion enabled, this requires duplicating
the fmul, or increases an fadd to another fma which is not an
improvement.
llvm-svn: 291642
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well.
Differential revision: https://reviews.llvm.org/D27742
llvm-svn: 291609
If a vector index is out of bounds, the result is supposed to be
undefined but is not undefined behavior. Change the legalization
for indexing the vector on the stack so that an out of bounds
index does not create an out of bounds memory access.
llvm-svn: 291604
For i16 zeroext arguments when i16 was a legal type, the
known bits information from the truncate was lost. Insert
a zeroext so the known bits optimizations work with the 32-bit
loads.
Fixes code quality regressions vs. SI in min.ll test.
llvm-svn: 291461
Summary:
Originally
i64 = umax t8, Constant:i64<4>
was expanded into
i32,i32 = umax Constant:i32<0>, Constant:i32<0>
i32,i32 = umax t7, Constant:i32<4>
Now instead the two produced umax:es return i32 instead of i32, i32.
Thanks to Jan Vesely for help with the test case.
Patch by mikael.holmen at ericsson.com
Reviewers: bogner, jvesely, tstellarAMD, arsenm
Subscribers: test, wdng, RKSimon, arsenm, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D28135
llvm-svn: 291441
Canonicalize a select with a constant to the false side. This
enables more instruction shrinking opportunities since an
inline immediate can be used for the false side of v_cndmask_b32_e32.
This seems to usually be better but causes some code size regressions
in some tests.
llvm-svn: 290372
Matt Arsenault