Summary:
This commit adds initial support for the jThreadsInfo packet to lldb-server. The current
implementation does not expedite inferior memory. I have also added a description of the new
packet to our protocol documentation (mostly taken from Greg's earlier commit message).
Reviewers: clayborg, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11187
llvm-svn: 242402
SUMMARY:
The patch detects MIPS application specific extensions (ASE) like micromips by reading
ELF header.e_flags and SHT_MIPS_ABIFLAGS section. MIPS triple does not contain ASE
information like micromips, mips16, DSP, MSA etc. These can be read from header.e_flags
or SHT_MIPS_ABIFLAGS section.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, lldb-commits
Differential Revision: http://reviews.llvm.org/D11133
llvm-svn: 242381
Summary:
Other changes around the main change include:
1. Add a method Cast to ValueObjectConstResult, ValueObjectConstResultImpl
and ValueObjectConstResultChild.
2. Add an argument |live_address| of type lldb::addr_t to the constructor
of ValueObjectConstResultChild. This is passed on to the backing
ValueObjectConstResultImpl object constructor so that the address of the
child value can be calculated properly.
Reviewers: granata.enrico, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11203
llvm-svn: 242374
This allows stepping operations that don't ever do a public stop to get all the info they need without having to send a jThreadsInfo packet since those tend to be large.
This patch will be followed by a patch that will detect when we do a public stop, and when that happens we will send a jThreadsInfo packet at that time to get all expedited registers and memory.
llvm-svn: 242352
This one I accidentally missed last time because I confused it with
the lldbUtility library. After this, all makefile libraries should
have the same names as their CMake counterparts.
llvm-svn: 242344
Summary:
The accept4 syscall is missing on older ARM Android kernels, and the accept()
call is implemented with the accept4 syscall, so we'll need to call the accept
syscall directly.
Reviewers: vharron, tberghammer, labath
Subscribers: ovyalov, chaoren, labath, tberghammer, aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D10887
llvm-svn: 242319
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
llvm-svn: 242305
should send when detaching and leaving the remote process/system
halted. Previously only the 'D' initial char was sent, which
resumed the process like a normal detach.
llvm-svn: 242256
Summary: This aligns the library names used by the Makefile build to be the same as those create by the CMake build to make switching between the two easier. The only major difficulty was lldbHost which was one library in the CMake system and several in the Makefile system. Most of the other changes are trivial renames.
Reviewers: labath
Subscribers: emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11154
llvm-svn: 242196
For Hexagon we want to be able to call functions during debugging, however currently lldb only supports this when there is JIT support.
Although emulation using IR interpretation is an alternative, it is currently limited in that it can't make function calls.
In this patch we have extended the IR interpreter so that it can execute a function call on the target using register manipulation.
To do this we need to handle the Call IR instruction, passing arguments to a new thread plan and collecting any return values to pass back into the IR interpreter.
The new thread plan is needed to call an alternative ABI interface of "ABI::PerpareTrivialCall()", allowing more detailed information about arguments and return values.
Reviewers: jingham, spyffe
Subscribers: emaste, lldb-commits, ted, ADodds, deepak2427
Differential Revision: http://reviews.llvm.org/D9404
llvm-svn: 242137
Existing commands supplying this type of help content have been reworked to take advantage of the changes. In addition to formatting changes, content was changes for accuracy and clarity purposes.
<rdar://problem/21269977>
llvm-svn: 242122
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Summary:
r241964 has added a dependency on uuid.h, which (on linux at least) necessitates instalation of a
new package. Since the only thing we need from that file is uuid_t (and this is already defined
in UuidCompatibility.h), we can avoid this dependency by making this include __APPLE__ specific.
If in future, we need more from this library, we can revisit this decision.
Reviewers: jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11135
llvm-svn: 242022
The size of a long double was hardcoded in DataExtractor for x86 and
x86_64 architectures. This CL removes the hard coded values and use the
actual size based on the floating point semantics specified.
Differential revision: http://reviews.llvm.org/D8417
llvm-svn: 242019
Summary:
This is the first part of our effort to make llgs single threaded. Currently, llgs consists of
about three threads and the synchronisation between them is a major source of latency when
debugging linux and android applications.
In order to be able to go single threaded, we must have the ability to listen for events from
multiple sources (primarily, client commands coming over the network and debug events from the
inferior) and perform necessary actions. For this reason I introduce the concept of a MainLoop.
A main loop has the ability to register callback's which will be invoked upon receipt of certain
events. MainLoopPosix has the ability to listen for file descriptors and signals.
For the moment, I have merely made the GDBRemoteCommunicationServerLLGS class use MainLoop
instead of waiting on the network socket directly, but the other threads still remain. In the
followup patches I indend to migrate NativeProcessLinux to this class and remove the remaining
threads.
Reviewers: ovyalov, clayborg, amccarth, zturner, emaste
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11066
llvm-svn: 242018
On Android the oatdata and the oatexec symbols in
system@framework@boot.oat covers the full .text section what causes
issues with displaying unusable symbol name to the user and very slow
unwinding speed because the instruction emulation based unwind plans
try to emulate all instructions in these symbols. Don't add these
symbols to the symbol list as they have no use for the debugger and
they are causing a lot of trouble.
Differential revision: http://reviews.llvm.org/D11065
llvm-svn: 242017
This patch:
- Allows mips32 cores to match with any mips32/mips64 cores.
- Allows mips32r2 cores to match with core only up-to mips32r2/mips64r2.
- Allows mips32r3 cores to match with core only up-to mips32r3/mips64r3.
- Allows mips32r5 cores to match with core only up-to mips32r3/mips64r5.
- Allows mips32r6 core to match with only mips32r6/mips64r6 or mips32/mips64.
Reviewers: emaste, jaydeep, clayborg
Subscribers: mohit.bhakkad, nitesh.jain, bhushan, lldb-commits
Differential Revision: http://reviews.llvm.org/D10921
llvm-svn: 242016
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
Summary:
32-bit signed return value from ptrace got sign extended when being converted to
64-bit unsigned.
Also, replaced tabs with spaces in the source.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11047
llvm-svn: 241837
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
This is a resubmit of r241672, after it was reverted due to build failueres on non-linux
platforms.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241796
The mentioned commit introduced a subtle change in behavior when printing variable names. This
occured when we have a variable, for which we only know the demangled name, because the compiler
has failed to provide one (this typically happens for variables in anonymous namespaces). A
Mangled class which contains only a demangled name considers itself to be invalid (this could
possibly be a bug), but it's GetName() method still returns a valid demangled name. The previous
commit introduced the check for the validity of the class, and if it failed, it would fall back
to printing the bare name (without the namespace prefixes, as the tests were expecting). I revert
this part of the commit and check the validity of the string returned by GetName() instead.
llvm-svn: 241795
Summary:
This is used on non-unix platforms, where qXfer:libraries-svr4:read
doesn't make sense. Windows uses that for instance.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11036
llvm-svn: 241712
Summary:
This commit moves the Windows DyanamicLoader to the common DynamicLoader
directory. This is required to remote debug Windows targets.
This commit also initializes the Windows DYLD plugin in
SystemInitializerCommon (similarly to both POSIX and MacOSX DYLD
plugins) so that we can automatically instantiate this class when
connected to a windows process.
Test Plan: Build.
Reviewers: zturner
Subscribers: lldb-commits, abdulras
Differential Revision: http://reviews.llvm.org/D10882
llvm-svn: 241697
pointed into the artificial function constructed for the expression. I now make
anything that pointed to the function as its DeclContext be global while the
copy occurs; afterward I restored the old DeclContext.
Added a testcase that make sure that this works properly and doesn't crash
anything.
<rdar://problem/21049838>
llvm-svn: 241695
platform-specific symbols that are not implemented on OS X.
The build error that caused this is
Undefined symbols for architecture x86_64:
"lldb_private::NativeProcessProtocol::Attach(unsigned long long, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::AttachToProcess(unsigned long long) in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
"lldb_private::NativeProcessProtocol::Launch(lldb_private::ProcessLaunchInfo&, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::LaunchProcess() in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
llvm-svn: 241688
Summary:
The DW_AT_name attribute of compile unit is optional.
If it is missing, try to get filename from the debug_line section.
This allows the compile unit to be useful without the filename.
Differential Revision: http://reviews.llvm.org/D11003
llvm-svn: 241679
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241672
We don't need to do the fancy dance with checking whether the iterator
represents a #define -- in fact, that's the wrong thing to do. The thing to do
is check whether the highest-priority module that did something to the module
#defined or #undefd it. If it #defined it, then the MacroInfo* will be non-NULL
and we're good to go.
llvm-svn: 241651
This can be in the cpp file rather than the header file, so moving
it there.
Summary: Move ProcessKDP's StringExtractor include.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11018
llvm-svn: 241649
Summary:
Fix StringExtractor.h issues.
* source/Plugins/Process/MacOSX-Kernel/ProcessKDP.cpp
(#include "Utility/StringExtractor.h): Not needed, this is already
included by ProcessKDP.h
* unittests/Utility/StringExtractorTest.cpp
(#include "Utility/StringExtractor.h): Update include path to the
new location.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10995
llvm-svn: 241596
Pavel Labath