In all cases, if a "mov" alias exists, it is the canonical form of the
instruction. Now that TableGen can support aliases containing syntax variants,
we can enable them and improve the quality of the asm output.
llvm-svn: 208874
Many old tests using prior schemas still had some brokenness here (both
indirect arrays and arrays with single bogus elements). Fixed those up
so they don't hit the new assertions.
Also reduced nesting in some places, etc.
llvm-svn: 208817
If the function has the landingpad instruction, then the
handlerdata should be emitted even if the function has
nouwnind attribute. Otherwise, following code will not
work:
void test1() noexcept {
try {
throw_exception();
} catch (...) {
log_unexpected_exception();
}
}
Since the cantunwind was incorrectly emitted and the
LSDA is not available.
llvm-svn: 208791
The commit r208166 will cause some regression on ARM EHABI.
This fix has been committed in r208715, and an assertion failure
test case has been committed in r208770.
This commit further extends the unittest so that the actual
value in the handlerdata will be checked.
llvm-svn: 208790
For example
tzcntl %edi, %ebx
testl %edi, %edi
je .label
can be rewritten into
tzcntl %edi, %ebx
jb .label
A minor complication is that tzcnt sets CF instead of ZF when the input
is zero, we have to rewrite users of the flags from ZF to CF. Currently
we recognize patterns using lzcnt, tzcnt and popcnt.
Differential Revision: http://reviews.llvm.org/D3454
llvm-svn: 208788
This commit was already commited as revision rL208689 and discussd in
phabricator revision D3704.
But the test file was crashing on OS X and windows.
I fixed the test file in the same way as in rL208340.
llvm-svn: 208711
compared to 'AddrMode.BaseReg'. In the case that 'AddrMode.BaseReg' is
nullptr, 'Result' will also be nullptr, so the cast causes an assertion. We
should use dyn_cast_or_null here to check 'Result' is not null and it is an
instruction.
Bug found by Mats Petersson, and I reduced his IR to get a test case.
llvm-svn: 208705
Normally, patterns like (add x, (setcc cc ...)) will be folded into
(csel x, x+1, not cc). However, if there is a ZEXT after SETCC, they
won't be folded. This patch recognizes the ZEXT and allows the
generation of CSINC.
This patch fixes bug 19680.
llvm-svn: 208660
Right now the load may not get DCE'd because of the side-effect of updating
the base pointer.
This can happen if we lower a read-modify-write of an illegal larger type
(e.g. i48) such that the modification only affects one of the subparts (the
lower i32 part but not the higher i16 part). See the testcase.
In order to spot the dead load we need to revisit it when SimplifyDemandedBits
decided that the value of the load is masked off. This is the
CommitTargetLoweringOpt piece.
I checked compile time with ARM64 by sending SPEC bitcode files through llc.
No measurable change.
Fixes <rdar://problem/16031651>
llvm-svn: 208640
r208453 added support for having sret on the second parameter. In that
change, the code for copying sret into a virtual register was hoisted
into the loop that lowers formal parameters. This caused a "Wrong
topological sorting" assertion failure during scheduling when a
parameter is passed in memory. This change undoes that by creating a
second loop that deals with sret.
I'm worried that this fix is incomplete. I don't fully understand the
dependence issues. However, with this change we produce the same DAGs
we used to produce, so if they are broken, they are just as broken as
they have always been.
llvm-svn: 208637
Tested by comparing make check VERBOSE=1 before and after to make sure
no tests are missed. (VERBOSE=1 prints the list of tests.)
Only one test :( remains where .cpp is required:
tools/llvm-cov/range_based_for.cpp:// RUN: llvm-cov range_based_for.cpp | FileCheck %s --check-prefix=STDOUT
The topic was discussed in this thread:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20140428/214905.html
llvm-svn: 208621
The current patterns for REV16 misses mostn __builtin_bswap16() due to
legalization promoting the operands to from load/stores toi32s and then
truncing/extending them. This patch adds new patterns that catch the resultant
DAGs and codegens them to rev16 instructions. Tests included.
rdar://15353652
llvm-svn: 208620
1) Changed gather and scatter intrinsics. Now they are aligned with GCC built-ins. There is no more non-masked form. Masked intrinsic receives -1 if all lanes are executed.
2) I changed the function that works with intrinsics inside X86ISelLowering.cpp. I put all intrinsics in one table. I did it for INTRINSICS_W_CHAIN and plan to put all intrinsics from WO_CHAIN set to the same table in order to avoid the long-long "switch". (I wanted to use static map initialization that allowed by C++11 but I wasn't able to compile it on VS2012).
3) I added gather/scatter prefetch intrinsics.
4) I fixed MRMm encoding for masked instructions.
llvm-svn: 208522
Support for the intrinsics that read from and write to global named registers
is added for r1, r2 and r13 (depending on the subtarget).
llvm-svn: 208509
The counter-loops formation pass needs to know what operations might be
function calls (because they can't appear in counter-based loops). On PPC32,
128-bit shifts might be runtime calls (even though you can't use __int128 on
PPC32, it seems that SROA might form them).
Fixes PR19709.
llvm-svn: 208501
When lowering build_vector to an insertps, we would still lower it, even
if the source vectors weren't v4x32. This would break on avx if the source
was a v8x32. We now check the type of the source vectors.
llvm-svn: 208487
We were swapping the true & false results while testing for FMAX/FMIN,
but not putting them back to the original state if the later checks
failed.
Should fix PR19700.
llvm-svn: 208469
This reverts commit r200561.
This calling convention was an attempt to match the MSVC C++ ABI for
methods that return structures by value. This solution didn't scale,
because it would have required splitting every CC available on Windows
into two: one for methods and one for free functions.
Now that we can put sret on the second arg (r208453), and Clang does
that (r208458), revert this hack.
llvm-svn: 208459
MSVC always places the implicit sret parameter after the implicit this
parameter of instance methods. We used to handle this for
x86_thiscallcc by allocating the sret parameter on the stack and leaving
the this pointer in ecx, but that doesn't handle alternative calling
conventions like cdecl, stdcall, fastcall, or the win64 convention.
Instead, change the verifier to allow sret on the second parameter.
This also requires changing the Mips and X86 backends to return the
argument with the sret parameter, instead of assuming that the sret
parameter comes first.
The Sparc backend also returns sret parameters in a register, but I
wasn't able to update it to handle secondary sret parameters. It
currently calls report_fatal_error if you feed it an sret in the second
parameter.
Reviewers: rafael.espindola, majnemer
Differential Revision: http://reviews.llvm.org/D3617
llvm-svn: 208453
This patch adds support to ARM for custom lowering of the
llvm.{u|s}add.with.overflow.i32 intrinsics for i32/i64. This is particularly useful
for handling idiomatic saturating math functions as generated by
InstCombineCompare.
Test cases included.
rdar://14853450
llvm-svn: 208435
When using the ARM AAPCS, HFAs (Homogeneous Floating-point Aggregates) must
be passed in a block of consecutive floating-point registers, or on the stack.
This means that unused floating-point registers cannot be back-filled with
part of an HFA, however this can currently happen. This patch, along with the
corresponding clang patch (http://reviews.llvm.org/D3083) prevents this.
llvm-svn: 208413
Summary:
Adds MIPS32r6/MIPS64r6 and checks the compatibility requirements for these
processors.
I've also included comments to describe removed and re-encoded instructions,
along with placeholder def's for the new instructions but there are no
functional changes to codegen at this point.
Reviewers: jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3622
llvm-svn: 208399
Handle lowering of global addresses for PIC mode compilation on Windows. Always
use the movw/movt load to load the address as Windows on ARM requires ARMv7+ and
is a pure Thumb environment.
llvm-svn: 208385
Summary:
Also ran clang-format on the function. The code added is the last else
if block.
Reviewers: nadav, craig.topper, delena
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3518
llvm-svn: 208372
This patch teaches the backend how to combine packed SSE2/AVX2 arithmetic shift
intrinsics.
The rules are:
- Always fold a packed arithmetic shift by zero to its first operand;
- Convert a packed arithmetic shift intrinsic dag node into a ISD::SRA only if
the shift count is known to be smaller than the vector element size.
This patch also teaches to function 'getTargetVShiftByConstNode' how fold
target specific vector shifts by zero.
Added two new tests to verify that the DAGCombiner is able to fold
sequences of SSE2/AVX2 packed arithmetic shift calls.
llvm-svn: 208342
When building on Windows, the default target is Windows. Windows on ARM does
not support ARM mode compilation, resulting in test failures. Simply specify a
triple to ensure that we are testing the correct behaviour.
llvm-svn: 208340
Summary:
Vectors built with zeros and elements in the same order as another
(source) vector are optimized to be built using a single insertps
instruction.
Also optimize when we move one element in a vector to a different place
in that vector while zeroing out some of the other elements.
Further optimizations are possible, described in TODO comments.
I will be implementing at least some of them in the near future.
Added some tests for different cases where this optimization triggers.
Reviewers: nadav, delena, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3521
llvm-svn: 208271
Prior to r208252, the FMA 231 family was marked as isCommutable. However the
memory variants of this family are not commutable. Therefore, we did not
implemented the findCommutedOpIndices for those variants and missed that
the default implementation (more or less: commute indices 1 and 2) was
firing behind our back.
As a result, as demonstrated in the test case before the fix, we were
transforming a = b * c + a into a = a * c + b.
I.e., before r208252 we were generating for this test case:
vmovaps %xmm0, %xmm1
vmoss (%rsi), %xmm0
vfmadd231ss (%rdi), %xmm1, %xmm0
Instead of:
vmoss (%rsi), %xmm1
vfmadd231ss (%rdi), %xmm1, %xmm0
<rdar://problem/16800495>
llvm-svn: 208260
this patch disables the dead register elimination pass and the load/store pair
optimization pass at -O0. The ILP optimizations don't require the optimization
level to be checked because the call to addILPOpts is predicated with the
necessary check. The AdvSIMDScalar pass is disabled by default at all
optimization levels. This patch leaves that pass disabled by default.
Also, move command-line options into ARM64TargetMachine.cpp and add a few
additional flags to aid in debugging. This fixes an issue with the
-debug-pass=Structure flag where passes were printed, but not actually run
(i.e., AdvSIMDScalar pass).
llvm-svn: 208223
When performing a scalar comparison that feeds into a vector select,
it's actually better to do the comparison on the vector side: the
scalar route would be "CMP -> CSEL -> DUP", the vector is "CM -> DUP"
since the vector comparisons are all mask based.
llvm-svn: 208210
The AAPCS states that values passed in registers must have a value as though
they had been loaded with "LDR". LDR is equivalent to "LD1.64 vX.1D" - that is,
loading scalars to vector registers and loading 1-element vectors is equivalent.
The logic implemented here is to ensure that at all call boundaries and during
formal argument lowering all vectors are treated as their bitwidth-based floating
point scalar counterpart, which is always one of f64 or f128 (v2i32 -> f64,
v4i32 -> f128 etc). A BITCAST is inserted so that the appropriate REV will be
generated during code generation.
llvm-svn: 208198
Because we've canonicalised on using LD1/ST1, every time we do a bitcast
between vector types we must do an equivalent lane reversal.
Consider a simple memory load followed by a bitconvert then a store.
v0 = load v2i32
v1 = BITCAST v2i32 v0 to v4i16
store v4i16 v2
In big endian mode every memory access has an implicit byte swap. LDR and
STR do a 64-bit byte swap, whereas LD1/ST1 do a byte swap per lane - that
is, they treat the vector as a sequence of elements to be byte-swapped.
The two pairs of instructions are fundamentally incompatible. We've decided
to use LD1/ST1 only to simplify compiler implementation.
LD1/ST1 perform the equivalent of a sequence of LDR/STR + REV. This makes
the original code sequence: v0 = load v2i32
v1 = REV v2i32 (implicit)
v2 = BITCAST v2i32 v1 to v4i16
v3 = REV v4i16 v2 (implicit)
store v4i16 v3
But this is now broken - the value stored is different to the value loaded
due to lane reordering. To fix this, on every BITCAST we must perform two
other REVs:
v0 = load v2i32
v1 = REV v2i32 (implicit)
v2 = REV v2i32
v3 = BITCAST v2i32 v2 to v4i16
v4 = REV v4i16
v5 = REV v4i16 v4 (implicit)
store v4i16 v5
This means an extra two instructions, but actually in most cases the two REV
instructions can be combined into one. For example:
(REV64_2s (REV64_4h X)) === (REV32_4h X)
There is also no 128-bit REV instruction. This must be synthesized with an
EXT instruction.
Most bitconverts require some sort of conversion. The only exceptions are:
a) Identity conversions - vNfX <-> vNiX
b) Single-lane-to-scalar - v1fX <-> fX or v1iX <-> iX
Even though there are hundreds of changed lines, I have a fairly high confidence
that they are somewhat correct. The changes to add two REV instructions per
bitcast were pretty mechanical, and once I'd done that I threw the resulting
.td at a script I wrote which combined the two REVs together (and added
an EXT instruction, for f128) based on an instruction description I gave it.
This was much less prone to error than doing it all manually, plus my brain
would not just have melted but would have vapourised.
llvm-svn: 208194
This completes the port of r204814 (cpirker "AArch64_BE function argument
passing for ARM ABI") from AArch64 to ARM64, and fixes a bunch of issues
found during later development along the way. The biggest of these was
that the alignment fixup logic wasn't replicated into all the places it
should have been.
llvm-svn: 208192
The ARM::BLX instruction is an ARM mode instruction. The Windows on ARM target
is limited to Thumb instructions. Correctly use the thumb mode tBLXr
instruction. This would manifest as an errant write into the object file as the
instruction is 4-bytes in length rather than 2. The result would be a corrupted
object file that would eventually result in an executable that would crash at
runtime.
llvm-svn: 208152
remove it from the list of unspilled registers. Otherwise the following
attempt to keep the stack aligned by picking an extra GPR register to
spill will not work as it picks up r11.
llvm-svn: 208129
Before this patch, the backend always emitted a store+load sequence to
bitconvert from f64 to i64 the input operand of a ISD::BITCAST dag node that
performed a bitconvert from type MVT::f64 to type MVT::v2i32. The resulting
i64 node was then used to build a v2i32 vector.
With this patch, the backend now produces a cheaper SCALAR_TO_VECTOR from
MVT::f64 to MVT::v2f64. That SCALAR_TO_VECTOR is then followed by a "free"
bitcast to type MVT::v4i32. The elements of the resulting
v4i32 are then extracted to build a v2i32 vector (which is illegal and
therefore promoted to MVT::v2i64).
This is in general cheaper than emitting a stack store+load sequence
to bitconvert the operand from type f64 to type i64.
llvm-svn: 208107
This patch implements the infrastructure to use named register constructs in
programs that need access to specific registers (bare metal, kernels, etc).
So far, only the stack pointer is supported as a technology preview, but as it
is, the intrinsic can already support all non-allocatable registers from any
architecture.
llvm-svn: 208104
An alias has the address of what it points to, so it also has the same
alignment.
This allows a few optimizations to see past aliases for free.
llvm-svn: 208103
The Win64 docs are very clear that anything larger than 8 bytes is
passed by reference, and GCC MinGW64 honors that for __modti3 and
friends.
Patch by Jameson Nash!
llvm-svn: 208029
Summary:
Also ran clang-format on the function. The code added is the last else
if block.
Reviewers: nadav, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3518
llvm-svn: 207992
Windows on ARM does not conform to AEABI. However, memset would be emitted
using the AEABI signature, resulting in inverted parameters. Handle this
special case appropriately.
llvm-svn: 207943
Both MinGW and cygwin (i686) construct export directives without the global
leader prefix. This is mostly due to the fact that they use GNU ld which does
not correctly handle the export directive. This apparently has been been broken
for a while. However, this was recently reported as being broken by
mingwandroid and diorcety of the msys2 project.
Remove the global leader prefix if targeting MinGW or cygwin, otherwise, retain
the global leader prefix. Add an explicit test for cygwin's behaviour of export
directives.
llvm-svn: 207926
While post-indexed LD1/ST1 instructions do exist for vector loads,
this patch makes use of the more flexible addressing-modes in LDR/STR
instructions.
llvm-svn: 207838
Given the following C code llvm currently generates suboptimal code for
x86-64:
__m128 bss4( const __m128 *ptr, size_t i, size_t j )
{
float f = ptr[i][j];
return (__m128) { f, f, f, f };
}
=================================================
define <4 x float> @_Z4bss4PKDv4_fmm(<4 x float>* nocapture readonly %ptr, i64 %i, i64 %j) #0 {
%a1 = getelementptr inbounds <4 x float>* %ptr, i64 %i
%a2 = load <4 x float>* %a1, align 16, !tbaa !1
%a3 = trunc i64 %j to i32
%a4 = extractelement <4 x float> %a2, i32 %a3
%a5 = insertelement <4 x float> undef, float %a4, i32 0
%a6 = insertelement <4 x float> %a5, float %a4, i32 1
%a7 = insertelement <4 x float> %a6, float %a4, i32 2
%a8 = insertelement <4 x float> %a7, float %a4, i32 3
ret <4 x float> %a8
}
=================================================
shlq $4, %rsi
addq %rdi, %rsi
movslq %edx, %rax
vbroadcastss (%rsi,%rax,4), %xmm0
retq
=================================================
The movslq is uneeded, but is present because of the trunc to i32 and then
sext back to i64 that the backend adds for vbroadcastss.
We can't remove it because it changes the meaning. The IR that clang
generates is already suboptimal. What clang really should emit is:
%a4 = extractelement <4 x float> %a2, i64 %j
This patch makes that legal. A separate patch will teach clang to do it.
Differential Revision: http://reviews.llvm.org/D3519
llvm-svn: 207801
This creates a lot of core infrastructure in which to add, with little
effort, quite a bit more to mips fast-isel
Test Plan: simplestore.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3527
llvm-svn: 207790
The canonical form of the BFM instruction is always one of the more explicit
extract or insert operations, which makes reading output much easier.
llvm-svn: 207752
For pattern like ((x >> C1) & Mask) << C2, DAG combiner may convert it
into (x >> (C1-C2)) & (Mask << C2), which makes pattern matching of ubfx
more difficult.
For example:
Given
%shr = lshr i64 %x, 4
%and = and i64 %shr, 15
%arrayidx = getelementptr inbounds [8 x [64 x i64]]* @arr, i64 0, %i64 2, i64 %and
%0 = load i64* %arrayidx
With current shift folding, it takes 3 instrs to compute base address:
lsr x8, x0, #1
and x8, x8, #0x78
add x8, x9, x8
If using ubfx, it only needs 2 instrs:
ubfx x8, x0, #4, #4
add x8, x9, x8, lsl #3
This fixes bug 19589
llvm-svn: 207702
There is no need to check if we want to hoist the immediate value of an
shift instruction. Simply return TCC_Free right away.
This change is like r206101, but for X86.
rdar://problem/16190769
llvm-svn: 207692
target cannot be determined accurately. This is the case for NaCl where the
sandboxing instructions are added in MC layer, after the MipsLongBranch pass.
It is also the case when the code has inline assembly. Instead of calculating
offset in the MipsLongBranch pass, use %hi(sym1 - sym2) and %lo(sym1 - sym2)
expressions that are resolved during the fixup.
This patch also deletes microMIPS test file test/CodeGen/Mips/micromips-long-branch.ll
and implements microMIPS CHECKs in a much simpler way in a file
test/CodeGen/Mips/longbranch.ll, together with MIPS32 and MIPS64.
llvm-svn: 207656
The canonical syntax for shifts by a variable amount does not end with 'v', but
that syntax should be supported as an alias (presumably for legacy reasons).
llvm-svn: 207649
On instructions using the NZCV register, a couple of conditions have dual
representations: HS/CS and LO/CC (meaning unsigned-higher-or-same/carry-set and
unsigned-lower/carry-clear). The first of these is more descriptive in most
circumstances, so we should print it.
llvm-svn: 207644
Summary:
This isn't supported directly so we rotate the vector by the desired number of
elements, insert to element zero, then rotate back.
The i64 case generates rather poor code on MIPS32. There is an obvious
optimisation to be made in future (do both insert.w's inside a shared
rotate/unrotate sequence) but for now it's sufficient to select valid code
instead of aborting.
Depends on D3536
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3537
llvm-svn: 207640
Since these are mostly used in "lsl #16", "lsl #32", "lsl #48" combinations to
piece together an immediate in 16-bit chunks, hex is probably the most
appropriate format.
llvm-svn: 207635
This is mostly aimed at the NEON logical operations and MOVI/MVNI (since they
accept weird shifts which are more naturally understandable in hex notation).
Also changes BRK/HINT etc, which is probably a neutral change, but easier than
the alternative.
llvm-svn: 207634
Since these instructions only accept a 12-bit immediate, possibly shifted left
by 12, the canonical syntax used by the architecture reference manual is "#N {,
lsl #12 }". We should accept an immediate that has already been shifted, (e.g.
Also, print a comment giving the full addend since it can be helpful.
llvm-svn: 207633
This introduces the stack lowering emission of the stack probe function for
Windows on ARM. The stack on Windows on ARM is a dynamically paged stack where
any page allocation which crosses a page boundary of the following guard page
will cause a page fault. This page fault must be handled by the kernel to
ensure that the page is faulted in. If this does not occur and a write access
any memory beyond that, the page fault will go unserviced, resulting in an
abnormal program termination.
The watermark for the stack probe appears to be at 4080 bytes (for
accommodating the stack guard canaries and stack alignment) when SSP is
enabled. Otherwise, the stack probe is emitted on the page size boundary of
4096 bytes.
llvm-svn: 207615
IMAGE_REL_ARM_MOV32T relocations require that the movw/movt pair-wise
relocation is not split up and reordered. When expanding the mov32imm
pseudo-instruction, create a bundle if the machine operand is referencing an
address. This helps ensure that the relocatable address load is not reordered
by subsequent passes.
Unfortunately, this only partially handles the case as the Constant Island Pass
occurs after the instructions are unbundled and does not properly handle
bundles. That is a more fundamental issue with the pass itself and beyond the
scope of this change.
llvm-svn: 207608
Currently, musttail codegen is relying on sibcall optimization, and
reporting a fatal error if fails. Sibcall optimization fails when stack
arguments need to be modified, which is insufficient for musttail.
The logic for moving arguments in memory safely is already implemented
for GuaranteedTailCallOpt. This change merely arranges for musttail
calls to use it.
No functional change for GuaranteedTailCallOpt.
Reviewers: espindola
Differential Revision: http://reviews.llvm.org/D3493
llvm-svn: 207598
SI_IF and SI_ELSE are terminators which also produce a value. For
these instructions ISel always inserts a COPY to move their value
to another basic block. This COPY ends up between SI_(IF|ELSE)
and the S_BRANCH* instruction at the end of the block.
This breaks MachineBasicBlock::getFirstTerminator() and also the
machine verifier which assumes that terminators are grouped together at
the end of blocks.
To solve this we coalesce the copy away right after ISel to make sure
there are no instructions in between terminators at the end of blocks.
llvm-svn: 207591
SALU instructions ignore control flow, so it is not always safe to use
them within branches. This is a partial solution to this problem
until we can come up with something better.
llvm-svn: 207590
This is a squash of several optimization commits:
- calculate DIV_Lo and DIV_Hi separately
- use BFE_U32 if we are operating on 32bit values
- use precomputed constants instead of shifting in UDVIREM
- skip the first 32 iterations of udivrem
v2: Check whether BFE is supported before using it
Patch by: Jan Vesely
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 207589
Summary:
This isn't supported directly so we splat the vector element and extract
the most convenient copy.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3530
llvm-svn: 207524
Otherwise the legalizer would just scalarize everything. Support for
mulhi in the targets isn't that great yet so on most targets we get
exactly the same scalarized output. Add a test for x86 vector udiv.
I had to disable the mulhi nodes on ARM because there aren't any patterns
for it. As far as I know ARM has instructions for getting the high part of
a multiply so this should be fixed.
llvm-svn: 207315
The included test case would return the incorrect results, because the expansion
of an shift with a constant shift amount of 0 would generate undefined behavior.
This is because ExpandShiftByConstant assumes that all shifts by constants with
a value of 0 have already been optimized away. This doesn't happen for opaque
constants and usually this isn't a problem, because opaque constants won't take
this code path - they are not supposed to. In the case that the opaque constant
has to be expanded by the legalizer, the legalizer would drop the opaque flag.
In this case we hit the limitations of ExpandShiftByConstant and create incorrect
code.
This commit fixes the legalizer by not dropping the opaque flag when expanding
opaque constants and adding an assertion to ExpandShiftByConstant to catch this
not supported case in the future.
This fixes <rdar://problem/16718472>
llvm-svn: 207304
Scaling factors are not free on X86 because every "complex" addressing mode
breaks the related instruction into 2 allocations instead of 1.
<rdar://problem/16730541>
llvm-svn: 207301
Summary:
If we're doing a v4f32/v4i32 shuffle on x86 with SSE4.1, we can lower
certain shufflevectors to an insertps instruction:
When most of the shufflevector result's elements come from one vector (and
keep their index), and one element comes from another vector or a memory
operand.
Added tests for insertps optimizations on shufflevector.
Added support and tests for v4i32 vector optimization.
Reviewers: nadav
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3475
llvm-svn: 207291
This intrinsic is no longer needed with the new @llvm.arm.hint(i32) intrinsic
which provides a generic, extensible manner for adding hint instructions. This
functionality can now be represented as @llvm.arm.hint(i32 5).
llvm-svn: 207246
Introduce the llvm.arm.hint(i32) intrinsic that can be used to inject hints into
the instruction stream. This is particularly useful for generating IR from a
compiler where the user may inject an intrinsic (e.g. __yield). These are then
pattern substituted into the correct instruction which already existed.
llvm-svn: 207242
There's no need for local symbols to go through the GOT, in fact it seems GNU ld is not even emitting GOT entries for local symbols and will error out when trying to resolve a GOT relocation for a local symbol.
This bug triggers when bootstrapping clang on AArch64 Linux with -fPIC and the ARM64 backend. The AArch64 backend is not affected.
With this commit it's now possible to bootstrap clang on AArch64 Linux with the ARM64 backend (-fPIC, -O3).
llvm-svn: 207226
Tom Stellard