Per original comment, the intention of this loop
is to go ahead and break the critical edge
(in order to sink this instruction) if there's
reason to believe doing so might "unblock" the
sinking of additional instructions that define
registers used by this one. The idea is that if
we have a few instructions to sink "together"
breaking the edge might be worthwhile.
This commit makes a few small changes
to help better realize this goal:
First, modify the loop to ignore registers
defined by this instruction. We don't
sink definitions of physical registers,
and sinking an SSA definition isn't
going to unblock an upstream instruction.
Second, ignore uses of physical registers.
Instructions that define physical registers are
rejected for sinking, and so moving this one
won't enable moving any defining instructions.
As an added bonus, while virtual register
use-def chains are generally small due
to SSA goodness, iteration over the uses
and definitions (used by hasOneNonDBGUse)
for physical registers like EFLAGS
can be rather expensive in practice.
(This is the original reason for looking at this)
Finally, to keep things simple continue
to only consider this trick for registers that
have a single use (via hasOneNonDBGUse),
but to avoid spuriously breaking critical edges
only do so if the definition resides
in the same MBB and therefore this one directly
blocks it from being sunk as well.
If sinking them together is meant to be,
let the iterative nature of this pass
sink the definition into this block first.
Update tests to accomodate this change,
add new testcase where sinking avoids pipeline stalls.
llvm-svn: 192608
When if converting something like:
true:
... = R0<kill>
false:
... = R0<kill>
then the instructions of the true block must not have a <kill> flag
anymore, as the instruction of the false block follow and do still read
the R0 value.
Specifically this patch determines the set of register live-in in the
false block (possibly after simulating the liveness changes of the
duplicated instructions). Each of these live-in registers mustn't be
killed.
llvm-svn: 192482
This reverts r192454
Apparently FileCheck isn't as smart as I though and does not enforce a
topological order between variable defs+uses.
llvm-svn: 192472
When we had a sequence like:
s1 = VLDRS [r0, 1], Q0<imp-def>
s3 = VLDRS [r0, 2], Q0<imp-use,kill>, Q0<imp-def>
s0 = VLDRS [r0, 0], Q0<imp-use,kill>, Q0<imp-def>
s2 = VLDRS [r0, 4], Q0<imp-use,kill>, Q0<imp-def>
we were gathering the {s0, s1} loads below the s3 load. This is fine,
but confused the verifier since now the s3 load had Q0<imp-use> with
no definition above it.
This should mark such uses <undef> as well. The liveness structure at
the beginning and end of the block is unaffected, and the true sN
definitions should prevent any dodgy reorderings being introduced
elsewhere.
rdar://problem/15124449
llvm-svn: 192344
from struct byval to registers.
We used to pass 0 which means the alignment of PtrVT. Even when the alignment
of the struct is smaller than 4, the LOADs would have alignment of 4, and
further optimizations could combine the LOADs into a ldm, which would
cause crash.
The fix is to pass the alignment of the struct byval.
rdar://problem/15144402
llvm-svn: 192126
optimizeSelect folds (predicated) copy instructions, it must not ignore
the original register class of the operand when replacing the register
with the copies dest register.
llvm-svn: 191963
The jump doesn't really kill the registers, the following call does but
we never get back anyway.
This avoids some verify-machineinstrs problems when TAILJUMPs are
if-converted.
llvm-svn: 191962
This function-attribute modifies the callee-saved register list and function
epilogue (specifically the return instruction) so that a routine is suitable
for use as an interrupt-handler of the specified type without disrupting
user-mode applications.
rdar://problem/14207019
llvm-svn: 191766
Generally, it is desirable to distribute (a + b) * c to a*c + b*c for
ARM with VMLx forwarding, where a, b and c are vectors.
However, for (a + b)*(a + b), distribution will result in one extra
instruction.
With distribution:
x = a + b (add)
y = a * x (mul)
z = y + b * y (mla)
Without distribution:
x = a + b (add)
z = x * x (mul)
This patch checks if a mul is a square of add/sub. If yes, skip
distribution.
llvm-svn: 191410
PEI inserts a save/restore sequence for the link register, according to the
information it gets from the MachineRegisterInfo.
MachineRegisterInfo is populated by the VirtRegMap pass.
This pass was not aware of noreturn calls and was registering the definitions of
these calls the same way as regular operations.
Modify VirtRegPass so that it does not set the isPhysRegUsed information for
registers only defined by noreturn calls.
The rational is that a noreturn call is the "last instruction" of the program
(if it returns the behavior is undefined), so everything that is defined by it
cannot be used and will not interfere with anything else. Therefore, it is
pointless to account for then.
llvm-svn: 191349
This is being disabled because it is no longer needed for
performance. It is only used by postRAscheduler which is also planned
for removal, and it is implemented with an out-dated view of register
liveness. It consideres aliases instead of register units, assumes
valid kill flags, and assumes implicit uses on partial register
defs. Kill flags and implicit operands are error prone and impossible
to verify. We should gradually eliminate dependence on them in the
postRA phases.
Targets that still benefit from this should move to the MI
scheduler. If that doesn't solve the problem, then we should add a
hook to regalloc to optimize reload placement.
llvm-svn: 191348
When a truncate node defines a legal vector type but uses an illegal
vector type, the legalization process was splitting the vector until
<1 x vector> type, but then it was failing to scalarize the node because
it did not know how to handle TRUNCATE.
<rdar://problem/14989896>
llvm-svn: 190830
Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).
llvm-svn: 190205
Solution is not sufficient to prevent 'mov pc, lr' being emitted for jump table code.
Test case doesn't trigger the added functionality.
llvm-svn: 190047
This improves code generation for jump tables by avoiding the emission of "mov pc, lr" which could fool the processor into believing this is a return from a function causing mispredicts. The code generation logic for jump tables uses ADR to materialize the address of the jump target.
Patch by Daniel Stewart!
llvm-svn: 190043
'Force' values in registers using the calling convention. Now, we only depend on
the calling convention and that the allocator performs copy coalescing.
llvm-svn: 189985
This reverts commit r189648.
Fixes for the previously failing clang-side arm_neon_intrinsics test
cases will be checked in separately.
llvm-svn: 189841
What we really want is to enable Swift by default for *v7s triples (and there already seems to be some logic which attempts to do that). In that case the iOS version doesn't matter.
llvm-svn: 189763
In addition to recognizing when the multiply's second argument is
coming from an explicit VDUPLANE, also look for a plain scalar
f32 reference and reference it via the corresponding vector
lane.
rdar://14870054
llvm-svn: 189619
The vqdmlal and vqdmlls instructions are really just a fused pair consisting of
a vqdmull.sN and a vqadd.sN. This adds patterns to LLVM so that we can switch
Clang's CodeGen over to generating these instead of the special vqdmlal
intrinsics.
llvm-svn: 189480
These instructions aren't particularly complicated and it's well worth having
patterns for some reasonably useful LLVM IR that will match them. Soon we
should be able to switch Clang over to producing this natural version.
llvm-svn: 189335
DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.
Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.
Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.
llvm-svn: 189282
Get the register class right for the TST instruction. This keeps the
machine verifier happy, enabling us to turn it on for another test.
rdar://12594152
llvm-svn: 189274
A single metadata will not span multiple lines. This also helps me with
my script to automatic update the testing cases.
A debug info testing case should have a llvm.dbg.cu.
Do not use hard-coded id for debug nodes.
llvm-svn: 189033
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
llvm-svn: 188995
Update testcase to be more careful about checking register
values. While regexes are general goodness for these sorts of
testcases, in this example, the registers are constrained by
the calling convention, so we can and should check their
explicit values.
rdar://14779513
llvm-svn: 188819
Previously we used a const-pool load for virtually all 64-bit floating values.
Actually, we can get quite a few common values (including 0.0, 1.0) via "vmov"
instructions of one stripe or another.
llvm-svn: 188773
When patching inlineasm nodes to use GPRPair for 64-bit values, we
were dropping the information that two operands were tied, which
effectively broke the live-interval of vregs affected.
llvm-svn: 188643
Properly constrain the operand register class for instructions used
in [sz]ext expansion. Update more tests to use the verifier now that
we're getting the register classes correct.
rdar://12594152
llvm-svn: 188594
Teach the generic instruction selection helper functions to constrain
the register classes of their input operands. For non-physical register
references, the generic code needs to be careful not to mess that up
when replacing references to result registers. As the comment indicates
for MachineRegisterInfo::replaceRegWith(), it's important to call
constrainRegClass() first.
rdar://12594152
llvm-svn: 188593
Lots of machine verifier errors result from using a plain GPR regclass
for incoming argument copies. A more restrictive rGPR class is more
appropriate since it more accurately represents what's happening, plus
it lines up better with isel later on so the verifier is happier.
Reduces the number of ARM fast-isel tests not running with the verifier
enabled by over half.
rdar://12594152
llvm-svn: 188592
This unbreaks PIC with fast isel on ELF targets (PR16717). The output matches
what GCC and SDag do for PIC but may not cover all of the many flavors of PIC
that exist.
llvm-svn: 188551
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
llvm-svn: 188513
When determining if two different loads are from the same base address,
this patch allows one load to use a t2LDRi8 address mode and another to
use a t2LDRi12 address mode. The current implementation is very
conservative and this allows the case of differing Thumb2 byte loads to
be considered. Allowing these differing modes instead of forcing the exact
same opcode is useful for situations where one opcodes loads from a base
address+1 and a second opcode loads for a base address-1.
Patch by Daniel Stewart.
llvm-svn: 188385
A common idiom is to use zero and all-ones as sentinal values and to
check for both in a single conditional ("x != 0 && x != (unsigned)-1").
That generates code, for i32, like:
testl %edi, %edi
setne %al
cmpl $-1, %edi
setne %cl
andb %al, %cl
With this transform, we generate the simpler:
incl %edi
cmpl $1, %edi
seta %al
Similar improvements for other integer sizes and on other platforms. In
general, combining the two setcc instructions into one is better.
rdar://14689217
llvm-svn: 188315
Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
llvm-svn: 188173
the type exists.
Fix up cases where we weren't checking for optional types and add
an assert to addType to make sure we catch this in the future.
Fix up a testcase that was using the tag for DW_TAG_array_type
when it meant DW_TAG_enumeration_type.
llvm-svn: 187963
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
Re-apply r187609 with fix to pass ocaml binding. vmcore.ml generates a debug
location with scope being metadata !{}, in verifier we treat this as a null
scope.
llvm-svn: 187812
Function attributes are the future! So just query whether we want to realign the
stack directly from the function instead of through a random target options
structure.
llvm-svn: 187618
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
llvm-svn: 187609
When simplifying a (or (and B A) (and C ~A)) to a (VBSL A B C) ensure that the
bitwidth of the second operands to both ands match before comparing the negation
of the values.
Split the check of the value of the second operands to the ands. Move the cast
and variable declaration slightly higher to make it slightly easier to follow.
Bug-Id: 16700
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
llvm-svn: 187404
This patch prevents the following combine when the input vector is used more
than once.
insert_vector_elt (build_vector elt0, ..., eltN), NewEltIdx, idx
=>
build_vector elt0, ..., NewEltIdx, ..., eltN
The reasons are:
- Building a vector may be expensive, so try to reuse the existing part of a
vector instead of creating a new one (think big vectors).
- elt0 to eltN now have two users instead of one. This may prevent some other
optimizations.
llvm-svn: 187396
Also always add DIType, DISubprogram and DIGlobalVariable to the list
in DebugInfoFinder without checking them, so we can verify them later
on.
llvm-svn: 187285
We used to call Verify before adding DICompileUnit to the list, and now we
remove the check and always add DICompileUnit to the list in DebugInfoFinder,
so we can verify them later on.
llvm-svn: 187237
The previous change to local live range allocation also suppressed
eviction of local ranges. In rare cases, this could result in more
expensive register choices. This commit actually revives a feature
that I added long ago: check if live ranges can be reassigned before
eviction. But now it only happens in rare cases of evicting a local
live range because another local live range wants a cheaper register.
The benefit is improved code size for some benchmarks on x86 and armv7.
I measured no significant compile time increase and performance
changes are noise.
llvm-svn: 187140
Also avoid locals evicting locals just because they want a cheaper register.
Problem: MI Sched knows exactly how many registers we have and assumes
they can be colored. In cases where we have large blocks, usually from
unrolled loops, greedy coloring fails. This is a source of
"regressions" from the MI Scheduler on x86. I noticed this issue on
x86 where we have long chains of two-address defs in the same live
range. It's easy to see this in matrix multiplication benchmarks like
IRSmk and even the unit test misched-matmul.ll.
A fundamental difference between the LLVM register allocator and
conventional graph coloring is that in our model a live range can't
discover its neighbors, it can only verify its neighbors. That's why
we initially went for greedy coloring and added eviction to deal with
the hard cases. However, for singly defined and two-address live
ranges, we can optimally color without visiting neighbors simply by
processing the live ranges in instruction order.
Other beneficial side effects:
It is much easier to understand and debug regalloc for large blocks
when the live ranges are allocated in order. Yes, global allocation is
still very confusing, but it's nice to be able to comprehend what
happened locally.
Heuristics could be added to bias register assignment based on
instruction locality (think late register pairing, banks...).
Intuituvely this will make some test cases that are on the threshold
of register pressure more stable.
llvm-svn: 187139
Make sure the context and type fields are MDNodes. We will generate
verification errors if those fields are non-empty strings.
Fix testing cases to make them pass the verifier.
llvm-svn: 187106
Prior to this patch, IfConverter may widen the cases where a sequence of
instructions were executed because of the way it uses nested predicates. This
result in incorrect execution.
For instance, Let A be a basic block that flows conditionally into B and B be a
predicated block.
B can be predicated with A.BrToBPredicate into A iff B.Predicate is less
"permissive" than A.BrToBPredicate, i.e., iff A.BrToBPredicate subsumes
B.Predicate.
The IfConverter was checking the opposite: B.Predicate subsumes
A.BrToBPredicate.
<rdar://problem/14379453>
llvm-svn: 187071
When vectors are built from a single value, the ARM lowering issues a
scalar_to_vector node.
This node is then always morphed into a move from the general purpose unit to
the vector unit.
When the value comes from a load, this can be simplified into a vector load to
the right lane.
This patch changes the lowering of insert_vector_elt to expose a vector
friendly pattern in this situation.
This is a step toward fixing <rdar://problem/14170854>.
llvm-svn: 186999
MDNodes used by DbgDeclareInst and DbgValueInst.
Another 16 testing cases failed and they are disabled with
-disable-debug-info-verifier.
A total of 34 cases are disabled with -disable-debug-info-verifier and will be
corrected.
llvm-svn: 186902
instructions. With this patch:
1. ldr.n is recognized as mnemonic for the short encoding
2. ldr.w is recognized as menmonic for the long encoding
3. ldr will map to either short or long encodings depending on the size of the offset
llvm-svn: 186831
indirect branches correctly. Under some circumstances, this led to the deletion
of basic blocks that were the destination of indirect branches. In that case it
left indirect branches to nowhere in the code.
This patch replaces, and is more general than either of the previous fixes for
indirect-branch-analysis issues, r181161 and r186461.
For other branches (not indirect) this refactor should have *almost* identical
behavior to the previous version. There are some corner cases where this
refactor is able to analyze blocks that the previous version could not (e.g.
this necessitated the update to thumb2-ifcvt2.ll).
<rdar://problem/14464830>
llvm-svn: 186735
All changes were made by the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
grep -q "^; *RUN: *llc.*debug" $NAME && continue
grep -q "^; *RUN:.*llvm-objdump" $NAME && continue
grep -q "^; *RUN: *opt.*" $NAME && continue
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\([A-Za-z0-9_-]*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC[:]* *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
done
This script catches a superset of the cases caught by the script associated with commit r186280. It initially found some false positives due to unusual constructs in a minority of tests; all such cases were disambiguated first in commit r186621.
llvm-svn: 186624
This patch enables calls to __aeabi_idivmod when in EABI mode,
by using the remainder value returned on registers (R1),
enabled by the ARM triple "none-eabi". Note that Darwin and
GNUEABI triples will continue lowering on GNU style, that is,
using the stack for the remainder.
Still need to add SREM/UREM support fix for 64-bit lowering.
llvm-svn: 186390
We can have a FrameSetup in one basic block and the matching FrameDestroy
in a different basic block when we have struct byval. In that case, SPAdj
is not zero at beginning of the basic block.
Modify PEI to correctly set SPAdj at beginning of each basic block using
DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block.
PEI had an assert SPAdjCount || SPAdj == 0.
If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure.
We can add an extra condition to make sure the pairs are matched:
The pairs start with a FrameSetup.
But since we are doing a much better job in the verifier, this patch removes
the check in PEI.
PR16393
llvm-svn: 186364
This update was done with the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
fi
done
llvm-svn: 186280
This was done with the following sed invocation to catch label lines demarking function boundaries:
sed -i '' "s/^;\( *\)\([A-Z0-9_]*\):\( *\)test\([A-Za-z0-9_-]*\):\( *\)$/;\1\2-LABEL:\3test\4:\5/g" test/CodeGen/*/*.ll
which was written conservatively to avoid false positives rather than false negatives. I scanned through all the changes and everything looks correct.
llvm-svn: 186258
ARM paired GPR COPY was being lowered to two MOVr without CC. This
patch puts the CC back.
My test is a reduction of the case where I encountered the issue,
64-bit atomics use paired GPRs.
The issue only occurs with selectionDAG, FastISel doesn't encounter it
so I didn't bother calling it.
llvm-svn: 186226
This prevents the emission of DAG-generated vreg definitions after a
tail call be dropping them entirely (on the grounds that nothing could
use them anyway, and they interfere with O0 CodeGen).
llvm-svn: 185754
A "pkhtb x, x, y asr #num" uses the lower 16 bits of "y asr #num" and packs them
in the bottom half of "x". An arithmetic and logic shift are only equivalent in
this context if the shift amount is 16. We would be shifting in ones into the
bottom 16bits instead of zeros if "y" is negative.
radar://14338767
llvm-svn: 185712
In the SelectionDAG immediate operands to inline asm are constructed as
two separate operands. The first is a constant of value InlineAsm::Kind_Imm
and the second is a constant with the value of the immediate.
In ARMDAGToDAGISel::SelectInlineAsm, if we reach an operand of Kind_Imm we
should skip over the next operand too.
llvm-svn: 185688
In the ARM back-end, build_vector nodes are lowered to a target specific
build_vector that uses floating point type.
This works well, unless the inserted bitcasts survive until instruction
selection. In that case, they incur moves between integer unit and floating
point unit that may result in inefficient code.
In other words, this conversion may introduce artificial dependencies when the
code leading to the build vector cannot be completed with a floating point type.
In particular, this happens when loads are not aligned.
Before this patch, in that case, the compiler generates general purpose loads
and creates the floating point vector from them, instead of directly using the
vector unit.
The patch uses a vector friendly sequence of code when the inserted bitcasts to
floating point survived DAGCombine.
This is done by a target specific DAGCombine that changes the target specific
build_vector into a sequence of insert_vector_elt that get rid of the bitcasts.
<rdar://problem/14170854>
llvm-svn: 185587
Swift cores implement store barriers that are stronger than the ARM
specification but weaker than general barriers. They are, in fact, just about
enough to provide the ordering needed for atomic operations with release
semantics.
This patch makes use of that quirk.
llvm-svn: 185527
Turns out I'd misread the architecture reference manual and thought
that was a load/store-store barrier, when it's not.
Thanks for pointing it out Eli!
llvm-svn: 185356
I believe the full "dmb ish" barrier is not required to guarantee release
semantics for atomic operations. The weaker "dmb ishst" prevents previous
operations being reordered with a store executed afterwards, which is enough.
A key point to note (fortunately already correct) is that this barrier alone is
*insufficient* for sequential consistency, no matter how liberally placed.
llvm-svn: 185339
should expand ATOMIC_CMP_SWAP nodes the same way that it does for ATOMIC_SWAP.
Since ATOMIC_LOADs on some targets (e.g. older ARM variants) get legalized to
ATOMIC_CMP_SWAPs, the missing case had been causing i64 atomic loads to crash
during isel.
<rdar://problem/14074644>
llvm-svn: 185186
This patch assigns paired GPRs for inline asm with
64-bit data on ARM. It's enabled for both ARM and Thumb to support modifiers
like %H, %Q, %R.
llvm-svn: 185169
We were generating intrinsics for NEON fixed-point conversions that didn't
exist (e.g. float -> i16). There are two cases to consider:
+ iN is smaller than float. In this case we can do the conversion but need an
extend or truncate as well.
+ iN is larger than float. In this case using the NEON conversion would be
incorrect so we don't perform any combining.
llvm-svn: 185158
No functionality change.
It should suffice to check the type of a debug info metadata, instead of
calling Verify. For cases where we know the type of a DI metadata, use
assert.
Also update testing cases to make them conform to the format of DI classes.
llvm-svn: 185135
A FastISel optimization was causing us to emit no information for such
parameters & when they go missing we end up emitting a different
function type. By avoiding that shortcut we not only get types correct
(very important) but also location information (handy) - even if it's
only live at the start of a function & may be clobbered later.
Reviewed/discussion by Evan Cheng & Dan Gohman.
llvm-svn: 184604
it at the moment.
This allows to form more paired loads even when stack coloring pass destroys the
memoryoperand's value.
<rdar://problem/13978317>
llvm-svn: 184492
value is zero.
This allows optmizations to kick in more easily.
Fix some test cases so that they remain meaningful (i.e., not completely dead
coded) when optimizations apply.
<rdar://problem/14096009> superfluous multiply by high part of zero-extended
value.
llvm-svn: 184222
The main advantages here are way better heuristics, taking into account not
just loop depth but also __builtin_expect and other static heuristics and will
eventually learn how to use profile info. Most of the work in this patch is
pushing the MachineBlockFrequencyInfo analysis into the right places.
This is good for a 5% speedup on zlib's deflate (x86_64), there were some very
unfortunate spilling decisions in its hottest loop in longest_match(). Other
benchmarks I tried were mostly neutral.
This changes register allocation in subtle ways, update the tests for it.
2012-02-20-MachineCPBug.ll was deleted as it's very fragile and the instruction
it looked for was gone already (but the FileCheck pattern picked up unrelated
stuff).
llvm-svn: 184105
Rather than using the full power of target-specific addressing modes in
DBG_VALUEs with Frame Indicies, simply use Frame Index + Offset. This
reduces the complexity of debug info handling down to two
representations of values (reg+offset and frame index+offset) rather
than three or four.
Ideally we could ensure that frame indicies had been eliminated by the
time we reached an assembly or dwarf generation, but I haven't spent the
time to figure out where the FIs are leaking through into that & whether
there's a good place to convert them. Some FI+offset=>reg+offset
conversion is done (see PrologEpilogInserter, for example) which is
necessary for some SelectionDAG assumptions about registers, I believe,
but it might be possible to make this a more thorough conversion &
ensure there are no remaining FIs no matter how instruction selection
is performed.
llvm-svn: 184066
in functions which call __builtin_unwind_init()
__builtin_unwind_init() is an undocumented gcc intrinsic which has this effect,
and is used in libgcc_eh.
Goes part of the way toward fixing PR8541.
llvm-svn: 183984
This is a resubmit of r182877, which was reverted because it broken
MCJIT tests on ARM. The patch leaves MCJIT on ARM as it was before: only
enabled for iOS. I've CC'ed people from the original review and revert.
FastISel was only enabled for iOS ARM and Thumb2, this patch enables it
for ARM (not Thumb2) on Linux and NaCl, but not MCJIT.
Thumb2 support needs a bit more work, mainly around register class
restrictions.
The patch punts to SelectionDAG when doing TLS relocation on non-Darwin
targets. I will fix this and other FastISel-to-SelectionDAG failures in
a separate patch.
The patch also forces FastISel to retain frame pointers: iOS always
keeps them for backtracking (so emitted code won't change because of
this), but Linux was getting much worse code that was incorrect when
using big frames (such as test-suite's lencod). I'll also fix this in a
later patch, it will probably require a peephole so that FastISel
doesn't rematerialize frame pointers back-to-back.
The test changes are straightforward, similar to:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html
They also add a vararg test that got dropped in that change.
I ran all of lnt test-suite on A15 hardware with --optimize-option=-O0
and all the tests pass. All the tests also pass on x86 make check-all. I
also re-ran the check-all tests that failed on ARM, and they all seem to
pass.
llvm-svn: 183966
Since we have ARM unwind directive parser and assembler, we
can check the correctness in two stages:
1. From LLVM assembly (.ll) to ARM assembly (.s)
2. From ARM assembly (.s) to ELF object file (.o)
We already have several "*.s to *.o" test cases. This CL adds
some "*.ll to *.s" test cases and removes the redundant "*.ll to *.o"
test cases.
New test cases to check "*.ll to *.s" code generator:
- ehabi.ll: Check the correctness of the generated unwind directives.
- section-name.ll: Check the section name of functions.
Removed test cases:
- ehabi-mc-cantunwind.ll
(Covered by ehabi-cantunwind.ll, and eh-directive-cantunwind.s)
- ehabi-mc-compact-pr0.ll
(Covered by ehabi.ll, eh-compact-pr0.s, eh-directive-save.s, and
eh-directive-setfp.s)
- ehabi-mc-compact-pr1.ll
(Covered by ehabi.ll, eh-compact-pr1.s, eh-directive-save.s, and
eh-directive-setfp.s)
- ehabi-mc.ll
(Covered by ehabi.ll, and eh-directive-integrated-test.s)
- ehabi-mc-section-group.ll
(Covered by section-name.ll, and eh-directive-section-comdat.s)
- ehabi-mc-section.ll
(Covered by section-name.ll, and eh-directive-section.s)
- ehabi-mc-sh_link.ll
(Covered by eh-directive-text-section.s, and eh-directive-section.s)
llvm-svn: 183628
Changes to ARM unwind opcode assembler:
* Fix multiple .save or .vsave directives. Besides, the
order is preserved now.
* For the directives which will generate multiple opcodes,
such as ".save {r0-r11}", the order of the unwind opcode
is fixed now, i.e. the registers with less encoding value
are popped first.
* Fix the $sp offset calculation. Now, we can use the
.setfp, .pad, .save, and .vsave directives at any order.
Changes to test cases:
* Add test cases to check the order of multiple opcodes
for the .save directive.
* Fix the incorrect $sp offset in the test case. The
stack pointer offset specified in the test case was
incorrect. (Changed test cases: ehabi-mc-section.ll and
ehabi-mc.ll)
* The opcode to restore $sp are slightly reordered. The
behavior are not changed, and the new output is same
as the output of GNU as. (Changed test cases:
eh-directive-pad.s and eh-directive-setfp.s)
llvm-svn: 183627
instantiation issue with non-standard type.
Add a backend option to warn on a given stack size limit.
Option: -mllvm -warn-stack-size=<limit>
Output (if limit is exceeded):
warning: Stack size limit exceeded (<actual size>) in <functionName>.
The longer term plan is to hook that to a clang warning.
PR:4072
<rdar://problem/13987214>.
llvm-svn: 183595
Option: -mllvm -warn-stack-size=<limit>
Output (if limit is exceeded):
warning: Stack size limit exceeded (<actual size>) in <functionName>.
The longer term plan is to hook that to a clang warning.
PR:4072
<rdar://problem/13987214>
llvm-svn: 183552
My recent ARM FastISel patch exposed this bug:
http://llvm.org/bugs/show_bug.cgi?id=16178
The root cause is that it can't select integer sext/zext pre-ARMv6 and
asserts out.
The current integer sext/zext code doesn't handle other cases gracefully
either, so this patch makes it handle all sext and zext from i1/i8/i16
to i8/i16/i32, with and without ARMv6, both in Thumb and ARM mode. This
should fix the bug as well as make FastISel faster because it bails to
SelectionDAG less often. See fastisel-ext.patch for this.
fastisel-ext-tests.patch changes current tests to always use reg-imm AND
for 8-bit zext instead of UXTB. This simplifies code since it is
supported on ARMv4t and later, and at least on A15 both should perform
exactly the same (both have exec 1 uop 1, type I).
2013-05-31-char-shift-crash.ll is a bitcode version of the above bug
16178 repro.
fast-isel-ext.ll tests all sext/zext combinations that ARM FastISel
should now handle.
Note that my ARM FastISel enabling patch was reverted due to a separate
failure when dealing with MCJIT, I'll fix this second failure and then
turn FastISel on again for non-iOS ARM targets.
I've tested "make check-all" on my x86 box, and "lnt test-suite" on A15
hardware.
llvm-svn: 183551
Fix an assertion when the compiler encounters big constants whose bit width is
not a multiple of 64-bits.
Although clang would never generate something like this, the backend should be
able to handle any legal IR.
<rdar://problem/13363576>
llvm-svn: 183544
The ARM backend did not expect LDRBi12 to hold a constant pool operand.
Allow for LLVM to deal with the instruction similar to how it deals with
LDRi12.
This fixes PR16215.
llvm-svn: 183238
For COFF and MachO, sections semantically have relocations that apply to them.
That is not the case on ELF.
In relocatable objects (.o), a section with relocations in ELF has offsets to
another section where the relocations should be applied.
In dynamic objects and executables, relocations don't have an offset, they have
a virtual address. The section sh_info may or may not point to another section,
but that is not actually used for resolving the relocations.
This patch exposes that in the ObjectFile API. It has the following advantages:
* Most (all?) clients can handle this more efficiently. They will normally walk
all relocations, so doing an effort to iterate in a particular order doesn't
save time.
* llvm-readobj now prints relocations in the same way the native readelf does.
* probably most important, relocations that don't point to any section are now
visible. This is the case of relocations in the rela.dyn section. See the
updated relocation-executable.test for example.
llvm-svn: 182908
Fixes PR16146: gdb.base__call-ar-st.exp fails after
pre-RA-sched=source fixes.
Patch by Xiaoyi Guo!
This also fixes an unsupported dbg.value test case. Codegen was
previously incorrect but the test was passing by luck.
llvm-svn: 182885
FastISel was only enabled for iOS ARM and Thumb2, this patch enables it
for ARM (not Thumb2) on Linux and NaCl.
Thumb2 support needs a bit more work, mainly around register class
restrictions.
The patch punts to SelectionDAG when doing TLS relocation on non-Darwin
targets. I will fix this and other FastISel-to-SelectionDAG failures in
a separate patch.
The patch also forces FastISel to retain frame pointers: iOS always
keeps them for backtracking (so emitted code won't change because of
this), but Linux was getting much worse code that was incorrect when
using big frames (such as test-suite's lencod). I'll also fix this in a
later patch, it will probably require a peephole so that FastISel
doesn't rematerialize frame pointers back-to-back.
The test changes are straightforward, similar to:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html
They also add a vararg test that got dropped in that change.
I ran all of test-suite on A15 hardware with --optimize-option=-O0 and
all the tests pass.
llvm-svn: 182877
This implements the @llvm.readcyclecounter intrinsic as the specific
MRC instruction specified in the ARM manuals for CPUs with the Power
Management extensions.
Older CPUs had slightly different methods which may also have to be
implemented eventually, but this should cover all v7 cases.
rdar://problem/13939186
llvm-svn: 182603
Now that the LiveDebugVariables pass is running *after* register
coalescing, the ConnectedVNInfoEqClasses class needs to deal with
DBG_VALUE instructions.
This only comes up when rematerialization during coalescing causes the
remaining live range of a virtual register to separate into two
connected components.
llvm-svn: 182592
Introduction:
In case when stack alignment is 8 and GPRs parameter part size is not N*8:
we add padding to GPRs part, so part's last byte must be recovered at
address K*8-1.
We need to do it, since remained (stack) part of parameter starts from
address K*8, and we need to "attach" "GPRs head" without gaps to it:
Stack:
|---- 8 bytes block ----| |---- 8 bytes block ----| |---- 8 bytes...
[ [padding] [GPRs head] ] [ ------ Tail passed via stack ------ ...
FIX:
Note, once we added padding we need to correct *all* Arg offsets that are going
after padded one. That's why we need this fix: Arg offsets were never corrected
before this patch. See new test-cases included in patch.
We also don't need to insert padding for byval parameters that are stored in GPRs
only. We need pad only last byval parameter and only in case it outsides GPRs
and stack alignment = 8.
Though, stack area, allocated for recovered byval params, must satisfy
"Size mod 8 = 0" restriction.
This patch reduces stack usage for some cases:
We can reduce ArgRegsSaveArea since inner N*4 bytes sized byval params my be
"packed" with alignment 4 in some cases.
llvm-svn: 182237
This patch matches GCC behavior: the code used to only allow unaligned
load/store on ARM for v6+ Darwin, it will now allow unaligned load/store
for v6+ Darwin as well as for v7+ on Linux and NaCl.
The distinction is made because v6 doesn't guarantee support (but LLVM
assumes that Apple controls hardware+kernel and therefore have
conformant v6 CPUs), whereas v7 does provide this guarantee (and
Linux/NaCl behave sanely).
The patch keeps the -arm-strict-align command line option, and adds
-arm-no-strict-align. They behave similarly to GCC's -mstrict-align and
-mnostrict-align.
I originally encountered this discrepancy in FastIsel tests which expect
unaligned load/store generation. Overall this should slightly improve
performance in most cases because of reduced I$ pressure.
llvm-svn: 182175
The transformation happening here is that we want to turn a
"mul(ext(X), ext(X))" into a "vmull(X, X)", stripping off the extension. We have
to make sure that X still has a valid vector type - possibly recreate an
extension to a smaller type. In case of a extload of a memory type smaller than
64 bit we used create a ext(load()). The problem with doing this - instead of
recreating an extload - is that an illegal type is exposed.
This patch fixes this by creating extloads instead of ext(load()) sequences.
Fixes PR15970.
radar://13871383
llvm-svn: 181842
ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on
enabling it for other targets. As a first step I've fixed some of the tests.
Changes to ARM FastISel tests:
- Different triples don't generate the same relocations (especially
movw/movt versus constant pool loads). Use a regex to allow either.
- Mangling is different. Use a regex to allow either.
- The reserved registers are sometimes different, so registers get
allocated in a different order. Capture the names only where this
occurs.
- Add -verify-machineinstrs to some tests where it works. It doesn't
work everywhere it should yet.
- Add -fast-isel-abort to many tests that didn't have it before.
- Split out the VarArg test from fast-isel-call.ll into its own
test. This simplifies test setup because of --check-prefix.
Patch by JF Bastien
llvm-svn: 181801
return values are bitcasts.
The chain had previously been being clobbered with the entry node to
the dag, which sometimes caused other code in the function to be
erroneously deleted when tailcall optimization kicked in.
<rdar://problem/13827621>
llvm-svn: 181696
Now even the small structures could be passed within byval (small enough
to be stored in GPRs).
In regression tests next function prototypes are checked:
PR15293:
%artz = type { i32 }
define void @foo(%artz* byval %s)
define void @foo2(%artz* byval %s, i32 %p, %artz* byval %s2)
foo: "s" stored in R0
foo2: "s" stored in R0, "s2" stored in R2.
Next AAPCS rules are checked:
5.5 Parameters Passing, C.4 and C.5,
"ParamSize" is parameter size in 32bit words:
-- NSAA != 0, NCRN < R4 and NCRN+ParamSize > R4.
Parameter should be sent to the stack; NCRN := R4.
-- NSAA != 0, and NCRN < R4, NCRN+ParamSize < R4.
Parameter stored in GPRs; NCRN += ParamSize.
llvm-svn: 181148
register-indirect address with an offset of 0.
It used to be that a DBG_VALUE is a register-indirect value if the offset
(operand 1) is nonzero. The new convention is that a DBG_VALUE is
register-indirect if the first operand is a register and the second
operand is an immediate. For plain registers use the combination reg, reg.
rdar://problem/13658587
llvm-svn: 180816
For now, we just reschedule instructions that use the copied vregs and
let regalloc elliminate it. I would really like to eliminate the
copies on-the-fly during scheduling, but we need a complete
implementation of repairIntervalsInRange() first.
The general strategy is for the register coalescer to eliminate as
many global copies as possible and shrink live ranges to be
extended-basic-block local. The coalescer should not have to worry
about resolving local copies (e.g. it shouldn't attemp to reorder
instructions). The scheduler is a much better place to deal with local
interference. The coalescer side of this equation needs work.
llvm-svn: 180193
-- C.4 and C.5 statements, when NSAA is not equal to SP.
-- C.1.cp statement for VA functions. Note: There are no VFP CPRCs in a
variadic procedure.
Before this patch "NSAA != 0" means "don't use GPRs anymore ". But there are
some exceptions in AAPCS.
1. For non VA function: allocate all VFP regs for CPRC. When all VFPs are allocated
CPRCs would be sent to stack, while non CPRCs may be still allocated in GRPs.
2. Check that for VA functions all params uses GPRs and then stack.
No exceptions, no CPRCs here.
llvm-svn: 180011
This reverts commit r179840 with a fix to test/DebugInfo/two-cus-from-same-file.ll
I'm not sure why that test only failed on ARM & MIPS and not X86 Linux, even
though the debug info was clearly invalid on all of them, but this ought to fix
it.
llvm-svn: 179996
Rather than just splitting the input type and hoping for the best, apply
a bit more cleverness. Just splitting the types until the source is
legal often leads to an illegal result time, which is then widened and a
scalarization step is introduced which leads to truly horrible code
generation. With the loop vectorizer, these sorts of operations are much
more common, and so it's worth extra effort to do them well.
Add a legalization hook for the operands of a TRUNCATE node, which will
be encountered after the result type has been legalized, but if the
operand type is still illegal. If simple splitting of both types
ends up with the result type of each half still being legal, just
do that (v16i16 -> v16i8 on ARM, for example). If, however, that would
result in an illegal result type (v8i32 -> v8i8 on ARM, for example),
we can get more clever with power-two vectors. Specifically,
split the input type, but also widen the result element size, then
concatenate the halves and truncate again. For example on ARM,
To perform a "%res = v8i8 trunc v8i32 %in" we transform to:
%inlo = v4i32 extract_subvector %in, 0
%inhi = v4i32 extract_subvector %in, 4
%lo16 = v4i16 trunc v4i32 %inlo
%hi16 = v4i16 trunc v4i32 %inhi
%in16 = v8i16 concat_vectors v4i16 %lo16, v4i16 %hi16
%res = v8i8 trunc v8i16 %in16
This allows instruction selection to generate three VMOVN instructions
instead of a sequences of moves, stores and loads.
Update the ARMTargetTransformInfo to take this improved legalization
into account.
Consider the simplified IR:
define <16 x i8> @test1(<16 x i32>* %ap) {
%a = load <16 x i32>* %ap
%tmp = trunc <16 x i32> %a to <16 x i8>
ret <16 x i8> %tmp
}
define <8 x i8> @test2(<8 x i32>* %ap) {
%a = load <8 x i32>* %ap
%tmp = trunc <8 x i32> %a to <8 x i8>
ret <8 x i8> %tmp
}
Previously, we would generate the truly hideous:
.syntax unified
.section __TEXT,__text,regular,pure_instructions
.globl _test1
.align 2
_test1: @ @test1
@ BB#0:
push {r7}
mov r7, sp
sub sp, sp, #20
bic sp, sp, #7
add r1, r0, #48
add r2, r0, #32
vld1.64 {d24, d25}, [r0:128]
vld1.64 {d16, d17}, [r1:128]
vld1.64 {d18, d19}, [r2:128]
add r1, r0, #16
vmovn.i32 d22, q8
vld1.64 {d16, d17}, [r1:128]
vmovn.i32 d20, q9
vmovn.i32 d18, q12
vmov.u16 r0, d22[3]
strb r0, [sp, #15]
vmov.u16 r0, d22[2]
strb r0, [sp, #14]
vmov.u16 r0, d22[1]
strb r0, [sp, #13]
vmov.u16 r0, d22[0]
vmovn.i32 d16, q8
strb r0, [sp, #12]
vmov.u16 r0, d20[3]
strb r0, [sp, #11]
vmov.u16 r0, d20[2]
strb r0, [sp, #10]
vmov.u16 r0, d20[1]
strb r0, [sp, #9]
vmov.u16 r0, d20[0]
strb r0, [sp, #8]
vmov.u16 r0, d18[3]
strb r0, [sp, #3]
vmov.u16 r0, d18[2]
strb r0, [sp, #2]
vmov.u16 r0, d18[1]
strb r0, [sp, #1]
vmov.u16 r0, d18[0]
strb r0, [sp]
vmov.u16 r0, d16[3]
strb r0, [sp, #7]
vmov.u16 r0, d16[2]
strb r0, [sp, #6]
vmov.u16 r0, d16[1]
strb r0, [sp, #5]
vmov.u16 r0, d16[0]
strb r0, [sp, #4]
vldmia sp, {d16, d17}
vmov r0, r1, d16
vmov r2, r3, d17
mov sp, r7
pop {r7}
bx lr
.globl _test2
.align 2
_test2: @ @test2
@ BB#0:
push {r7}
mov r7, sp
sub sp, sp, #12
bic sp, sp, #7
vld1.64 {d16, d17}, [r0:128]
add r0, r0, #16
vld1.64 {d20, d21}, [r0:128]
vmovn.i32 d18, q8
vmov.u16 r0, d18[3]
vmovn.i32 d16, q10
strb r0, [sp, #3]
vmov.u16 r0, d18[2]
strb r0, [sp, #2]
vmov.u16 r0, d18[1]
strb r0, [sp, #1]
vmov.u16 r0, d18[0]
strb r0, [sp]
vmov.u16 r0, d16[3]
strb r0, [sp, #7]
vmov.u16 r0, d16[2]
strb r0, [sp, #6]
vmov.u16 r0, d16[1]
strb r0, [sp, #5]
vmov.u16 r0, d16[0]
strb r0, [sp, #4]
ldm sp, {r0, r1}
mov sp, r7
pop {r7}
bx lr
Now, however, we generate the much more straightforward:
.syntax unified
.section __TEXT,__text,regular,pure_instructions
.globl _test1
.align 2
_test1: @ @test1
@ BB#0:
add r1, r0, #48
add r2, r0, #32
vld1.64 {d20, d21}, [r0:128]
vld1.64 {d16, d17}, [r1:128]
add r1, r0, #16
vld1.64 {d18, d19}, [r2:128]
vld1.64 {d22, d23}, [r1:128]
vmovn.i32 d17, q8
vmovn.i32 d16, q9
vmovn.i32 d18, q10
vmovn.i32 d19, q11
vmovn.i16 d17, q8
vmovn.i16 d16, q9
vmov r0, r1, d16
vmov r2, r3, d17
bx lr
.globl _test2
.align 2
_test2: @ @test2
@ BB#0:
vld1.64 {d16, d17}, [r0:128]
add r0, r0, #16
vld1.64 {d18, d19}, [r0:128]
vmovn.i32 d16, q8
vmovn.i32 d17, q9
vmovn.i16 d16, q8
vmov r0, r1, d16
bx lr
llvm-svn: 179989
Previously, when spilling 64-bit paired registers, an LDMIA with both
a FrameIndex and an offset was produced. This kind of instruction
shouldn't exist, and the extra operand was being confused with the
predicate, causing aborts later on.
This removes the invalid 0-offset from the instruction being
produced.
llvm-svn: 179956
Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.
llvm-svn: 179836
This pattern occurs in SROA output due to the way vector arguments are lowered
on ARM.
The testcase from PR15525 now compiles into this, which is better than the code
we got with the old scalarrepl:
_Store:
ldr.w r9, [sp]
vmov d17, r3, r9
vmov d16, r1, r2
vst1.8 {d16, d17}, [r0]
bx lr
Differential Revision: http://llvm-reviews.chandlerc.com/D647
llvm-svn: 179106
The Thumb2SizeReduction pass avoids false CPSR dependencies, except it
still aggressively creates tMOVi8 instructions because they are so
common.
Avoid creating false CPSR dependencies even for tMOVi8 instructions when
the the CPSR flags are known to have high latency. This allows integer
computation to overlap floating point computations.
Also process blocks in a reverse post-order and propagate high-latency
flags to successors.
<rdar://problem/13468102>
llvm-svn: 178773
This is helps on architectures where i8,i16 are not legal but we have byte, and
short loads/stores. Allowing us to merge copies like the one below on ARM.
copy(char *a, char *b, int n) {
do {
int t0 = a[0];
int t1 = a[1];
b[0] = t0;
b[1] = t1;
radar://13536387
llvm-svn: 178546
This reverts commit 342d92c7a0adeabc9ab00f3f0d88d739fe7da4c7.
Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.
llvm-svn: 178215
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.
llvm-svn: 178099
NEON is not IEEE 754 compliant, so we should avoid lowering single-precision
floating point operations with NEON unless unsafe-math is turned on. The
equivalent VFP instructions are IEEE 754 compliant, but in some cores they're
much slower, so some archs/OSs might still request it to be on by default,
such as Swift and Darwin.
llvm-svn: 177651
This makes DIType's first non-tag parameter the same as DIFile's, allowing them
to both share the common implementation of getFilename/getDirectory in DIScope.
llvm-svn: 177467
This is another step along the way to making all DIScopes have a common prefix
which can be added to in a general manner to support using directives
(DW_TAG_imported_module).
llvm-svn: 177462
The ARM backend currently has poor codegen for long sext/zext
operations, such as v8i8 -> v8i32. This patch addresses this
by performing a custom expansion in ARMISelLowering. It also
adds/changes the cost of such lowering in ARMTTI.
This partially addresses PR14867.
Patch by Pete Couperus
llvm-svn: 177380
Apparently my final cleanup to use a relevant suffix for these tests before
committing r176831 caused them to stop running since lit wasn't configured to
run tests with that suffix in those directories (why don't we just have a
global suffix list?). So, add the suffix to the relevant directories & fix the
test that has bitrotted over the last week due to my debug info schema changes.
llvm-svn: 177315
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.
llvm-svn: 177239
I was too pessimistic in r177105. Vector selects that fit into a legal register
type lower just fine. I was mislead by the code fragment that I was using. The
stores/loads that I saw in those cases came from lowering the conditional off
an address.
Changing the code fragment to:
%T0_3 = type <8 x i18>
%T1_3 = type <8 x i1>
define void @func_blend3(%T0_3* %loadaddr, %T0_3* %loadaddr2,
%T1_3* %blend, %T0_3* %storeaddr) {
%v0 = load %T0_3* %loadaddr
%v1 = load %T0_3* %loadaddr2
==> FROM:
;%c = load %T1_3* %blend
==> TO:
%c = icmp slt %T0_3 %v0, %v1
==> USE:
%r = select %T1_3 %c, %T0_3 %v0, %T0_3 %v1
store %T0_3 %r, %T0_3* %storeaddr
ret void
}
revealed this mistake.
radar://13403975
llvm-svn: 177170
By terrible I mean we store/load from the stack.
This matters on PAQp8 in _Z5trainPsS_ii (which is inlined into Mixer::update)
where we decide to vectorize a loop with a VF of 8 resulting in a 25%
degradation on a cortex-a8.
LV: Found an estimated cost of 2 for VF 8 For instruction: icmp slt i32
LV: Found an estimated cost of 2 for VF 8 For instruction: select i1, i32, i32
The bug that tracks the CodeGen part is PR14868.
radar://13403975
llvm-svn: 177105
In r176898 I updated the cost model to reflect the fact that sext/zext/cast on
v8i32 <-> v8i8 and v16i32 <-> v16i8 are expensive.
This test case is so that we make sure to update the cost model once we fix
CodeGen.
llvm-svn: 176955
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.
llvm-svn: 176913
This could be 'null' or the empty string, DIDescriptor::getStringField
coalesces the two cases anyway so it's just a matter of legible/efficient
representation.
The change in behavior of the DICompileUnit::get* functions could be
subsumed by the full verification check - but ideally that should just be an
assertion if we could front-load the actual debug info metadata failure paths.
llvm-svn: 176907
These cases were found by further work to remove support for debug info
versioning. Common cleanups (other than changing the version info in the tag
field) included adding the last parameter to compile_units (recently added for
fission support) and other cases of trailing fields in lexical blocks, compile
units, and subprograms.
llvm-svn: 176834
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
llvm-svn: 176733
Code generation makes some basic assumptions about the IR it's been given. In
particular, if there is only one 'invoke' in the function, then that invoke
won't be going away. However, with the advent of the `llvm.donothing' intrinsic,
those invokes may go away. If all of them go away, the landing pad no longer has
any users. This confuses the back-end, which asserts.
This happens with SjLj exceptions, because that's the model that modifies the IR
based on there being invokes, etc. in the function.
Remove any invokes of `llvm.donothing' during SjLj EH preparation. This will
give us a CFG that the back-end won't be confused about. If all of the invokes
in a function are removed, then the SjLj EH prepare pass won't insert the bogus
code the relies upon the invokes being there.
<rdar://problem/13228754&13316637>
llvm-svn: 176677
Mostly this is just changing the named metadata (llvm.dbg.sp, llvm.dbg.gv,
llvm.dbg.<func>.lv, etc -> llvm.dbg.cu), adding a few fields to older records
(DIVariable: flags/inlined-at, DICompileUnit: sp/gv/types,
DISubprogram: local variables list)
The tests to update were discovered by a change I'm working on to remove debug
info version support - so any tests using old debug info versions I haven't
updated probably are bad tests or just not actually designed to test debug
info.
llvm-svn: 176671
Will Dietz